About Pig City Teardown
Pig City Teardown (75824-1) is a LEGO Angry Birds set released in 2016, currently averaging $39.99 used on BrickLink. It comes with 4 minifigures worth a combined $10.19. The set has retired from retail, so secondary market is the only option. The full parts inventory runs 180 pieces.
Part-out value
The minifigures account for about 25% of the set's value ($10.19 out of $39.99). The remaining value is in the parts and the set as a complete package. Selling complete will likely net more than parting out unless you have specific demand for the individual figures.
Seller notes
- Sealed copies sell for $72.61 vs $39.99 used — a 82% premium. If you have this set new in sealed box (NISB), price it accordingly.
Minifigures in Pig City Teardown (4)
Parts (180)
Bar Holder with Clip
Black×3
Brick, Modified 1 x 2 with Studs on 1 Side
White
Plate, Modified 1 x 2 with Pin Hole on Top
Reddish Brown×2
Slope, Curved 2 x 1 x 2/3
Reddish Brown×4
Cone 1 x 1 Inverted with Bar
Tan×4
Slope, Curved 4 x 1 Inverted
Dark Orange×2
Wheel 18mm D. x 8mm with Fake Bolts and Deep Spokes with Inner Ring
Light Bluish Gray×2
Brick 1 x 1 x 3
White×6
Brick 1 x 1 x 3
Medium Azure×8
Panel 1 x 4 x 2 with Side Supports - Hollow Studs
Red×3
Tile, Round 2 x 2 with Bottom Stud Holder
White
Tile, Round 2 x 2 with Bottom Stud Holder
Medium Azure×2
Slope, Curved 2 x 2 x 2/3
Reddish Brown×9
Road Sign 2 x 2 Square with Open O Clip
White
Arch 1 x 6 x 2 - Medium Thick Top without Reinforced Underside
White
Plate, Round 1 x 1 with Vertical Swirl / Twist
White×3
Plate, Round 1 x 1 with Vertical Swirl / Twist
Bright Pink×3
Tile, Round 2 x 2 with Hole
Dark Bluish Gray
Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)
White
Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)
Dark Bluish Gray
Wedge, Plate A-Shape with 2 Rows of 4 Studs
Reddish Brown×2
Tile, Modified 1 x 1 with Open O Clip
White
Tile, Modified 1 x 1 with Open O Clip
Dark Bluish Gray
Flag 2 x 2 Square with Flat Edge
Yellow
Horse Hitching / Harness Traces
Black
Tile, Modified 1 x 2 Grille with Bottom Groove
Dark Bluish Gray×2
Tile, Modified 1 x 2 Grille with Bottom Groove
Reddish Brown×3
Plate 2 x 2 Corner
Reddish Brown×2
Propeller 3 Blade Small
Black
Tile 1 x 4
White×4
Tile 1 x 4
Dark Bluish Gray
Tile 1 x 4
Reddish Brown×2
Tile 1 x 4 with Wood Grain and 3 Silver Nails Pattern
Medium Nougat×5
Bracket 1 x 2 - 1 x 4 with Rounded Corners
Light Bluish Gray
Brick 1 x 1 x 5 - Solid Stud
White
Brick 1 x 2 x 5
Reddish Brown×4
Brick, Modified 1 x 2 with Pin
Black×2
Brick, Modified 1 x 2 with Pin
Dark Bluish Gray×2
Egg with Small Pin Hole
White×5
Brick, Round 2 x 2 Dome Bottom with Studs
White×2
Brick, Round 2 x 2 Dome Bottom with Studs
Red×3
Hot Dog / Sausage Bun
Tan
Plate, Round 2 x 2 with Rounded Bottom (Boat Stud)
Tan
Technic, Disk 3 x 3
Black
Plate, Modified 2 x 2 with Pin Holes
Black×3
Brick 2 x 4
Medium Nougat×3
Brick 2 x 2
Medium Nougat
Brick 1 x 2
Light Bluish Gray
Brick 1 x 2
Medium Azure×2
Brick 1 x 1
White×11
Brick 1 x 1
Light Bluish Gray
Brick 1 x 1
Medium Azure×4
Brick 1 x 4
Light Bluish Gray
Chain 21 Links (16-17L)
Dark Bluish Gray
Container, Crate 3 x 4 x 1 2/3 with Handholds
Medium Nougat
Plate, Modified 2 x 4 with Pins and Thin Angled Supports
Reddish Brown
Plate 2 x 4
Yellow
Plate 2 x 4
Medium Azure×2
Plate 2 x 3
Dark Green×2
Plate 2 x 3
Reddish Brown
Plate 1 x 2
Light Bluish Gray×6
Plate 1 x 2
Reddish Brown×4
Plate 1 x 2
Medium Azure×5
Brick, Modified 1 x 2 with Bar Handle on Side
White
Brick, Modified 1 x 2 with Bar Handle on Side
Light Bluish Gray
Plate 1 x 1
Yellow×6
Plate 6 x 12
Dark Bluish Gray
Plate 4 x 12
Green
Rock 4 x 4 Octagonal Boulder, Top
Dark Bluish Gray×2
Rock 4 x 4 Octagonal Boulder, Bottom
Dark Bluish Gray×2
Plate 4 x 4
Yellow
Plate 4 x 4
Light Bluish Gray×2
Plate 4 x 6
Yellow×3
Plate 2 x 8
Reddish Brown×3
Minifigure, Utensil Flotation Ring (Life Preserver)
White
Plate 4 x 8
Green
Plate 4 x 8
Dark Bluish Gray×2
Plate 6 x 8
Dark Tan×2
Plate 6 x 8
Medium Azure
Brick, Round 2 x 2 x 2 Robot Body with Bottom Axle Holder (x Shape / + Orientation)
Black
Bar 4L (Lightsaber Blade / Wand)
Light Bluish Gray
Slope, Inverted 45 4 x 2 Double with Pins
Dark Bluish Gray
Slope 45 2 x 1
White×4
Panel 1 x 4 x 1
Light Bluish Gray
Brick, Round 1 x 1
Yellow
Brick, Round 1 x 1
Red
Brick, Round 1 x 1
Dark Brown
Tile 2 x 2
Light Bluish Gray
Tile 2 x 2 with 'TNT' on Wood Grain Pattern
Medium Nougat
Tile 1 x 2
Dark Orange×2
Tile 1 x 2
Reddish Brown×3
Plate, Modified 2 x 3 with Hole
Black
Plate, Modified 2 x 3 with Hole
Light Bluish Gray×2
Technic, Axle and Pin Connector Angled #1
Dark Bluish Gray×2
Technic, Axle and Pin Connector Angled #6 - 90 degrees
Light Bluish Gray×3
Technic, Axle and Pin Connector Angled #2 - 180 degrees
Light Bluish Gray
Technic, Axle Connector with Axle Hole
Black
Technic, Axle 2L Notched
Red×2
Technic, Brick 1 x 2 with Axle Hole
Dark Bluish Gray×2
Technic, Axle 5L
Light Bluish Gray×2
Technic, Axle and Pin Connector Angled #4 - 135 degrees
Dark Bluish Gray×2
Technic, Gear 12 Tooth Double Bevel
Black
Technic, Pin Connector Plate 1 x 2 x 1 2/3 with 2 Holes on Top
Dark Bluish Gray×8
Technic, Pin 3L without Friction Ridges
Tan
Hot Dog / Sausage
Red×2
Fence 1 x 4 x 2 Paled (Picket)
White×2
Brick 1 x 3
White×4
Plate 1 x 3
White
Plate 1 x 6
White×2
Plate 1 x 6
Medium Azure×4
Technic, Pin without Friction Ridges
Light Bluish Gray×7
Technic, Brick 1 x 2 with Hole
White×3
Technic, Axle 6L
Black
Plate 1 x 4
Yellow×5
Plate 1 x 4
Dark Green×4
Plate 1 x 4
Light Bluish Gray×3
Plate 1 x 4
Reddish Brown
Plate 1 x 4
Medium Azure×4
Slope, Inverted 33 3 x 2 with Flat Bottom Pin and Connections between Studs
Reddish Brown
Technic, Axle 1L with Pin without Friction Ridges with Round Hole
Tan
Plate 2 x 6
Dark Tan×4
Hinge Brick 1 x 2 Base
Black×3
Brick, Round 2 x 2 with Axle Hole
Light Bluish Gray×2
Cone 2 x 2 x 2 - Open Stud
Light Bluish Gray
Antenna 4H - Flat Top
Light Bluish Gray
Plate, Round 1 x 1
Trans-Green×3
Plate, Modified 1 x 1 with Light Attachment - Thick Ring
Light Bluish Gray×2
Minifigure, Utensil Umbrella Top with No Bottom Flaps, 6 x 6 with Top Stud
Red
Plate 8 x 8
Dark Bluish Gray
Wedge, Plate 4 x 2 Left
Dark Green×3
Technic Bush 1/2 Smooth
Yellow×2
Technic, Pin 1/2 without Friction Ridges
Blue×2
Technic, Axle 1L with Pin with Friction Ridges
Blue
Technic, Axle 3L
Yellow×3
Technic, Axle 3L
Light Bluish Gray
Cone 1 x 1 with Top Groove
Trans-Yellow
Plate, Modified 1 x 2 with Long Stud Holder (Space Wing)
Light Bluish Gray
Tap 1 x 1 without Hole in Nozzle End
Yellow×2
Tap 1 x 1 without Hole in Nozzle End
Red×2
Dish 2 x 2 Inverted (Radar)
Light Bluish Gray
Plate, Modified 2 x 2 with Wheels Holder Wide - Technic Pins
Light Bluish Gray
Panel 1 x 2 x 1 with Rounded Corners
Black×3
Technic, Axle Connector Hub with 4 Bars and Pin Hole
Reddish Brown
Bar 1L with Clip Mechanical Claw - Cut Edges and Hole on Side
Dark Bluish Gray×2
Brick, Round 2 x 2 Dome Top
White×2
Brick, Round 2 x 2 Dome Top
Red×3
Bar 7 x 3 with 2 U Clips (Ladder)
Black
Brick, Modified 1 x 1 with Open O Clip (Vertical Grip) - Hollow Stud
White×2
Brick, Modified 1 x 1 with Open O Clip (Vertical Grip) - Hollow Stud
Light Bluish Gray
Brick, Modified 1 x 1 with Clip (Horizontal Grip)
Black×2
Window 1 x 2 x 2 Flat Front
Medium Azure×3
Hinge Brick 2 x 2 Top Plate
Light Bluish Gray×3
Turntable 4 x 4 Square Base, Locking
Light Bluish Gray
Bar 1 x 3 with 2 Stud Receptacles (Radio Handle / Telephone Handset)
Medium Azure
Technic, Pin Connector Round 2L with Slot (Pin Joiner Round)
Black
Cylinder Half 2 x 4 x 4
Dark Bluish Gray
Leg Skeleton
Light Bluish Gray×3
Tile 1 x 3
Dark Tan×2
Bar 6L with Stop Ring
Black×7
Minifigure, Utensil Dynamite Sticks Bundle
Red×3
Container, Barrel Half Large with Axle Hole
Medium Nougat
Technic, Axle Connector 2L (Smooth with x Hole + Orientation)
Black×2
Technic, Axle Connector 2L (Smooth with x Hole + Orientation)
Light Bluish Gray
Technic, Brick 1 x 1 with Hole
Light Bluish Gray×2
Tile 1 x 6
Yellow
Sticker Sheet for Set 75824 - International Version - (26761/6152464)
(Not Applicable)
Plate, Modified 2 x 2 with Bar Frame Octagonal, Reinforced, Completely Round Studs
Flat Silver
Hose, Rigid 3mm D. 32L / 25.6cm
Black×3
Plate, Round 1 x 1 with Open Stud
Pearl Gold×3
Tile 2 x 4
Blue
Tile 2 x 4
Dark Orange×2
Brick, Round 4 x 4 with Hole
Dark Bluish Gray
Technic, Axle 4L with Stop
Dark Bluish Gray
Panel 1 x 2 x 3 with Side Supports - Hollow Studs
White×3
Panel 1 x 2 x 3 with Side Supports - Hollow Studs
Trans-Clear×4
Bar 5L with Handle (Friction Ram)
Light Bluish Gray×2
Brick, Modified Facet 2 x 2
Light Bluish Gray×2
Plate, Modified 1 x 4 with 2 Studs without Groove
Red×4
Technic, Axle 4L with Center Stop
Tan
Bracket 1 x 2 - 2 x 2 Inverted
Light Bluish Gray×2Common questions about Pig City Teardown
How much is LEGO Pig City Teardown (75824-1) worth?
Pig City Teardown sells for an average of $39.99 used and $72.61 new/sealed on BrickLink based on 6 months of completed sales. As a retired set, prices tend to hold steady or appreciate over time, especially for complete sets with original packaging. Actual prices vary with completeness — missing minifigures or key parts will lower the value.
What minifigures come in LEGO set 75824-1?
This set includes 4 minifigures: Red, Left Eyebrow Raised ($2.77), Stella ($3.14), Piggy 2 ($2.25), Piggy 3 ($2.02). The minifigures have a combined BrickLink value of $10.19. Each figure is linked above with individual pricing if you're looking to buy or sell specific characters.
Is it worth parting out LEGO Pig City Teardown?
The minifigures make up about 25% of the set value ($10.19 out of $39.99). Most of the value is in the complete set package, so selling it whole is likely the better move unless you have buyers lined up for specific figures.
Is LEGO Pig City Teardown (75824-1) retired?
Yes, Pig City Teardown was released in 2016 and has been retired from retail for several years. Retired LEGO sets are only available on the secondary market through BrickLink, eBay, or other resale platforms.
How do I check if my Pig City Teardown set is complete?
Use the parts list on this page to check every piece and all 4 minifigures. For the minifigures specifically, you can use the brick'em scanner to identify each figure from a photo and confirm it matches what should be in this set. Missing pieces can be individually sourced on BrickLink.