Brick, Modified 1 x 2 with Studs on 1 Side
×2 Plate, Round 6 x 6 with Hole
Plate, Modified 1 x 2 with Clip on Side (Horizontal Grip)
×2 Tile 2 x 2 Corner
×2 Tile, Round 2 x 2 with Bottom Stud Holder with Dark Brown and Reddish Brown Star Shaped Crevice, Green and Lime Triangles Pattern (Animal Crossing Fossil Dig Spot)
Tile, Modified 1 x 2 with 2 Teeth Vertical
×3 Plant Grass Stem
Plant Grass Stem
Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)
×6 Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)
×3 Tile, Modified 1 x 1 with Open O Clip
×4 Brick, Round 2 x 2 with Pin Holes
×2 Slope, Curved 2 x 2 Inverted with 2 Recessed Studs
Slope, Curved 2 x 2 Inverted with 2 Recessed Studs
×2 Tile, Round 2 x 2 with Open Stud
×2 Tile, Round 2 x 2 with Open Stud
×3 Tile, Round 2 x 2 with Open Stud
Clam / Scallop Shell with 4 Studs
Tile, Round 1 x 1 with Bar and Small Pin Hole
×9 Bar Holder with Handle
Minifigure, Utensil Net - Small Meshed
Plate 2 x 2 Corner
×2 Slope, Curved 2 x 1 x 2/3 Inverted
×2 Hinge Plate 1 x 4 Swivel (2429 / 2430)
×4 Tile 1 x 4
×2 Tile, Modified 1 x 2 with Bar Handle
×2 Plate 2 x 12
×2 Brick 1 x 1 x 5 - Solid Stud
×4 Brick 2 x 6
×2 Plant Flower Stem with Bar Holder, Bar, and 3 Stems
×5 Plate, Round 1 x 1 with Flower Edge (5 Petals)
×7 Plate, Round 1 x 1 with Flower Edge (5 Petals)
×3 Plate, Round 1 x 1 with Flower Edge (5 Petals)
×5 Plate, Round 1 x 1 with Flower Edge (5 Petals)
×7 Plate, Round 1 x 1 with Flower Edge (5 Petals)
×7 Plate, Round 1 x 1 with Flower Edge (5 Petals)
×7 Plate, Round 1 x 1 with Flower Edge (5 Petals)
×3 Tile, Round 1 x 1 Quarter
×3 Plate, Modified 1 x 2 with Bar Handle on Side - Free Ends
Minifigure, Utensil Fishing Rod / Pole, 12L
Brick, Modified 8 x 8 x 2/3 with 1 x 4 Indentations
×2 Brick, Modified 8 x 16 x 2/3 with 1 x 4 Indentations
Wedge, Plate 2 x 2 Cut Corner
×4 Tile 2 x 3 with Green and Dark Green Water Lily Pads with White and Bright Pink Flowers, Medium Azure Water and Gold Frame Pattern
Brick, Modified 1 x 1 with Studs on 2 Sides, Adjacent
×2 Plant Plate, Round 1 x 1 with Curved, Upright Leaf
×2 Spider with Elongated Abdomen
Brick 2 x 4
×2 Brick 2 x 3
Brick 2 x 2
×12 Brick 2 x 2
Brick 2 x 2
Brick 2 x 2
Brick 2 x 2
×4 Brick 2 x 2
Brick 1 x 2
×5 Brick 1 x 2
Brick 1 x 1
×14 Brick 1 x 1
Brick 1 x 1
Brick 1 x 1
×8 Brick 2 x 8
Brick 1 x 8
×5 Brick 1 x 6
×2 Brick 1 x 6
×3 Brick 1 x 4
×10 Brick 1 x 4
×2 Scorpion
Plate 2 x 4
×3 Plate 2 x 4
×5 Plate 2 x 4
×3 Plate 2 x 4
Plate 2 x 2
Plate 2 x 2
×2 Plate 2 x 2
×3 Plate 1 x 2
Plate 1 x 2
×2 Plate 1 x 2
×2 Plate 1 x 2
×2 Plate 1 x 2
×4 Plate 1 x 1
×7 Plate 1 x 1
×3 Plate 1 x 1
×2 Plate 1 x 1
×2 Flag 7 x 3 with Bar Handle
×2 Plate 4 x 4
×2 Plate 4 x 6
Plate 2 x 8
×2 Slope 18 4 x 2
Bar 4L (Lightsaber Blade / Wand)
Tile 2 x 2 with Green Owl (Brewster), Red Coffee Cup and Reddish Brown and Dark Brown Frame Pattern
Tile 1 x 2
×4 Tile 1 x 2
×6 Tile 1 x 2 with Plaque with Silver Nails, Box, and Text Lines and White Owl and Pixelated Title Pattern
×5 Plate, Modified 1 x 2 with Door Rail
×2 Plate, Modified 1 x 2 with Door Rail
×2 Plate, Modified 1 x 2 with Door Rail
×2 Technic Ball Joint
×3 Plant Plate, Round 1 x 1 with 3 Layered Leaves
×2 Plate, Round 3 x 4 x 2/3, Raised 1 x 4
×2 Crab
Tile, Modified 2 x 2 with Studs on Edge
Plate 1 x 8
×3 Plate 1 x 8
×2 Dish 4 x 4 Inverted (Radar) with Open Stud
Slope 45 1 x 1 x 2/3 Double
×2 Plate 1 x 3
×5 Plate 1 x 3
×4 Plate 1 x 6
×2 Plate 1 x 6
×4 Plate 1 x 4
Plate 1 x 4
×2 Plate 1 x 4
×12 Slope, Curved 1 x 2 with Bottom Stud Holder
×4 Plant Stem with Bar, 3 Leaves, and Small Pin Hole
×2 Plate 2 x 6
Plate 2 x 6
Plate 2 x 6
×5 Plate 2 x 6
×3 Plate 2 x 6
×2 Minifigure, Utensil Teacup
×3 Minifigure, Utensil Shovel / Spade - Handle with Round End
Minifigure, Utensil Magnifying Glass Thick Frame and Hollow Handle with Trans-Clear Lens
Hinge Brick 1 x 2 Base
×2 Hinge Brick 1 x 2 Top Plate
×2 Brick, Round 2 x 2 with Axle Hole
×2 Brick, Round 2 x 2 with Axle Hole
×2 Plate 6 x 6
Dinosaur Tail End Section / Horn
Brick, Modified 1 x 1 with Headlight
×2 Plate, Round 1 x 1
×2 Plate, Round 1 x 1
×5 Plate, Modified 1 x 1 with Open O Clip Thick (Vertical Grip)
×4 Window 1 x 6 x 6 Flat Front
Plate 2 x 16
Dish 3 x 3 Inverted (Radar)
Hinge Plate 1 x 2 Locking with 1 Finger on Side without Bottom Groove
Plate, Modified 1 x 8 with Door Rail
Cone 1 x 1 with Top Groove
Cone 1 x 1 with Top Groove
Dish 2 x 2 Inverted (Radar)
×2 Dish 2 x 2 Inverted (Radar)
Brick, Round Corner 4 x 4 Macaroni with 3 Studs
×4 Panel 1 x 2 x 1 with Rounded Corners
×3 Bar 1L with Clip Mechanical Claw - Cut Edges and Hole on Side
×2 Plant Thallus / Seaweed / Coral
Plate, Modified 1 x 1 with Tooth Horizontal
×4 Rock 1 x 1 Crystal 5 Point
Brick, Round 2 x 2 with 4 Roots / Feet and Axle Hole
Plate, Round 1 x 1 with Horizontal Swirl / Twist
×2 Barb / Claw / Horn / Tooth - Small
×3 Slope 30 1 x 1 x 2/3
×11 Slope 30 1 x 1 x 2/3
×3 Panel 1 x 6 x 5
×2 Panel 1 x 6 x 5
×5 Panel 1 x 6 x 5
×2 Vehicle, Mudguard 2 x 4 with Arch Studded with Hole
×2 Plate, Round 4 x 4 with Hole
Plate, Round 4 x 4 with Hole
Slope 18 4 x 1
×6 Plate, Modified 1 x 1 with Open O Clip (Horizontal Grip)
×4 Turntable 4 x 4 Square Base, Locking
×2 Fish
Fish
Plate, Modified 2 x 4 with 2 Studs (Double Jumper)
Bar 1L with Angled Hollow Stud
×3 Tile 1 x 6
×6 Tile 1 x 6
×2 Plate, Modified 6 x 6 with Rounded Corners and 4 Feet
Plate, Modified 6 x 6 with Rounded Corners and 4 Feet
Plate, Modified 8 x 8 with Rounded Corners and 4 Feet
×3 Tile, Round 3 x 3 with Owl and Dark Brown, Reddish Brown and Medium Nougat Circles Pattern
Tile 2 x 6
×2 Plate, Round 4 x 8 x 2/3, Raised 2 x 8 and 2 x 2 Cutout
×5 Snail Body
Plate 3 x 3 Corner
×2 Bar 2L with Stop Ring
×5 Plate 1 x 5
×8 Butterfly / Moth with Stud Holder with Blue Wings and White Spots Pattern
Butterfly / Moth with Stud Holder with White Wings Pattern
Door 1 x 3 x 6 with Stud Handle
×2 Brick, Round Corner 2 x 2 Macaroni with Stud Notch and Reinforced Underside
×4 Plate, Round 1 x 1 with Open Stud
×7 Plate, Round 1 x 1 with Open Stud
×6 Plate, Round 1 x 1 with Open Stud
×3 Brick, Modified 1 x 2 with Stud on Side with Bottom Stud Holder
×2 Brick, Modified 1 x 2 with Stud on Side with Bottom Stud Holder
Brick, Modified 1 x 1 x 2/3 with Open Stud
×2 Tile 2 x 4
×4 Brick, Modified 1 x 1 with Stud on Side
×2 Panel 1 x 2 x 2 with Side Supports - Hollow Studs
×2 Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper)
Brick, Modified Facet 2 x 2
×4 Bar 3L (Bar Arrow)
×2 Technic, Pin 1/2 with Friction Ridges
×5 Plate, Round 4 x 6 x 2/3, Raised 2 x 6 and 2 x 2 Cutout
×2 Brick, Round 2 x 2 with Axle Hole and Grille / Fluted Profile
×13 Arch 1 x 6 Raised Arch
Brick and Axle Separator
Tile, Round 1 x 1
×5 Tile, Round 1 x 1 with Medium Lavender and White Ammonite and Stars Pattern (Animal Crossing Fossil)
×2 Arm Mechanical, Exo-Force / Bionicle, Thick Support
×4 Bracket 1 x 2 - 2 x 2 Inverted
Bracket 1 x 2 - 1 x 2
×2 Frog