How much is LEGO Dolphins Rescue Mission (41378-1) worth?

Dolphins Rescue Mission sells for an average of $19.59 used and $36.21 new/sealed on BrickLink based on 6 months of completed sales. As a retired set, prices tend to hold steady or appreciate over time, especially for complete sets with original packaging. Actual prices vary with completeness. Missing minifigures or key parts will lower the value.

What minifigures come in LEGO set 41378-1?

This set includes 2 minifigures: Friends Stephanie - Medium Azure and Magenta Wetsuit, Lime Flippers ($1.62), Friends Kacey - Dark Blue and Sand Green Wetsuit, Black Flippers ($1.70). The minifigures have a combined BrickLink value of $3.32. Each figure is linked above with individual pricing if you're looking to buy or sell specific characters.

Is it worth parting out LEGO Dolphins Rescue Mission?

The minifigures make up about 17% of the set value ($3.32 out of $19.59). Most of the value is in the complete set package, so selling it whole is likely the better move unless you have buyers lined up for specific figures.

Is LEGO Dolphins Rescue Mission (41378-1) retired?

Yes, Dolphins Rescue Mission was released in 2019 and has been retired from retail for several years. Retired LEGO sets are only available on the secondary market through BrickLink, eBay, or other resale platforms.

How do I check if my Dolphins Rescue Mission set is complete?

Use the parts list on this page to check every piece and all 2 minifigures. For the minifigures specifically, you can use the brick'em scanner to identify each figure from a photo and confirm it matches what should be in this set. Missing pieces can be individually sourced on BrickLink.

Dolphins Rescue Mission

41378-1·Friends·2019·2 minifigs·184 parts

Used Avg

$19.59

New Avg

$36.21

Add to your inventory Scan the minifigs

About Dolphins Rescue Mission

Dolphins Rescue Mission (41378-1) is a LEGO Friends set released in 2019, currently averaging $19.59 used on BrickLink. It comes with 2 minifigures worth a combined $3.32. The set has retired from retail, so secondary market is the only option. The full parts inventory runs 184 pieces.

Parts (184)

Tile, Modified 2 x 2 Inverted

×2

Plate, Round 6 x 6 with Hole

Slope, Curved 2 x 1 x 2/3

×3

Dolphin, Friends Style, Jumping with Bottom Axle Holder with Medium Azure Eyes with Double Eyelashes Pattern

Plate, Modified 1 x 2 with Small Tow Ball Socket on Side

Tile, Round 2 x 2 with Bottom Stud Holder

Hook Grappling with Side Bar

Tile, Round 2 x 2 with Hole

Slope 45 2 x 1 Triple with Bottom Stud Holder

Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)

×2

Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)

×3

Tile, Modified 1 x 1 with Open O Clip

×2

Rock 1 x 1 Jewel Heart Shaped

Brick, Round 2 x 2 with Pin Holes

×2

Plate, Round Half 3 x 6 with 1 x 2 Cutout

Arch 1 x 3 x 2 Inverted

×2

Tile, Round 2 x 2 with Open Stud

Minifigure, Utensil Baby Bottle with Handle

Panel 3 x 4 x 3 Curved with Double Clip Hinge

×2

Fence 4 x 4 x 2 Quarter Round Spindled with 3 Studs

×2

Minifigure, Headgear Helmet Space with Air Intakes and Hole on Top

Bar 1L with Tow Ball

×3

Plate, Round Half 4 x 8

×2

Slope, Inverted 45 6 x 2 Double with 2 x 4 Cutout

×5

Slope, Inverted 45 6 x 2 Double with 2 x 4 Cutout

Brick 2 x 2 Corner

×2

Plant Leaves 4 x 3

×5

Tile 1 x 4

×2

Brick 2 x 6

Plate, Round 1 x 1 with Flower Edge (5 Petals)

×5

Brick, Round Tube 1 x 1 d. 90 degrees Elbow Macaroni - No Stud - Type 2 - Axle Hole

Tile, Round 1 x 1 Quarter

×5

Tile, Round 1 x 1 Quarter

×3

Plate, Modified 1 x 2 with Bar Handle on Side - Free Ends

Minifigure Footgear Flipper

Plate, Round 1 x 1 with Bar Handle

×2

Plate, Round 1 x 1 with Bar Handle

Plate, Round 2 x 2 with Rounded Bottom (Boat Stud)

×2

Tile, Round Corner 4 x 4 Macaroni

×2

Technic, Pin with Short Friction Ridges

×13

Tile, Round Corner 2 x 2 Macaroni

×4

Wedge 2 x 1 x 2/3 Right

Wedge 2 x 1 x 2/3 Left

Brick 1 x 2

Brick 1 x 1

×2

Brick 1 x 1

×2

Minifigure, Visor Scuba Diver Mask

×2

Rock 1 x 1 Jewel 24 Facet

×2

Rock 1 x 1 Jewel 24 Facet

×2

Rock 1 x 1 Jewel 24 Facet

×2

Plate 2 x 3

Plate 2 x 2

×2

Plate 1 x 2

×4

Plate 1 x 2

×4

Plate 1 x 2

×2

Plate 1 x 2

×5

Brick, Modified 1 x 2 with Bar Handle on Side

Brick, Modified 1 x 2 with Open O Clip Thick (Vertical Grip)

Plate 1 x 1

×4

Plate 1 x 1

×4

Plate 4 x 4

×2

Minifigure, Utensil Flotation Ring (Life Preserver)

Tile, Modified 2 x 3 with 2 Open O Clips

Brick, Round 2 x 2 x 2 Robot Body with Bottom Axle Holder (x Shape / + Orientation)

×2

Bar 4L (Lightsaber Blade / Wand)

Slope 45 2 x 1

×2

Hinge Cylinder 1 x 2 Locking with 1 Finger and Axle Hole on Ends with Slots

×2

Hinge Cylinder 1 x 2 Locking with 2 Fingers and Axle Hole on Ends with Slots

×2

Tile 2 x 2

×2

Tile 1 x 2

Tile 1 x 1

×5

Minifigure, Utensil Oar / Paddle Head

Technic, Axle and Pin Connector Angled #1

Technic, Axle 2L Notched

×3

Technic Ball Joint

Technic, Pin Connector Plate 1 x 2 x 1 2/3 with 2 Holes on Top

×3

Technic, Pin 3L without Friction Ridges

Mini Doll, Hair Combo, Hat with Hair, Racing Helmet with Molded Flexible Rubber Bright Light Yellow Hair Ponytail Pattern

Arch 1 x 4

×3

Slope, Inverted 45 2 x 1

×2

Plate 1 x 6

×4

Technic, Pin without Friction Ridges

×3

Technic, Plate 2 x 4 with 3 Holes

Plate 1 x 4

×2

Plate 1 x 4

×2

Plate 1 x 4

Plate 2 x 10

Technic, Brick 1 x 6 with Holes

×2

Antenna 4H - Flat Top

×3

Plate, Round 2 x 2 with Axle Hole

×2

Plate, Round 2 x 2 with Axle Hole

×2

Plate, Round 2 x 2 with Axle Hole

Plate, Round 1 x 1

×4

Plate, Round 1 x 1

×4

Plate, Modified 1 x 1 with Open O Clip Thick (Vertical Grip)

Sticker Sheet for Set 41378 - (50443/6257617)

Cylinder 4 x 4 x 1 2/3 with Pin Holes and Center Bar

×2

Plate 8 x 8

Plate, Modified 1 x 4 with 2 Studs with Groove

×2

Slope, Curved 6 x 1 Inverted

×4

Technic, Pin 1/2 without Friction Ridges

×6

Slope 33 3 x 1

Technic, Axle 1L with Pin with Friction Ridges

×3

Wedge, Plate 3 x 2 Right

Wedge, Plate 3 x 2 Left

Hinge Plate 1 x 4 Locking Dual 1 Finger on Side

Slope 75 2 x 1 x 3 - Hollow Stud

×2

Tail Shuttle, Small

Arch 1 x 3

Flag 4 x 1 Wave Right

×4

Flag 4 x 1 Wave Right

×2

Cone 1 x 1 with Top Groove

Antenna Small Base with Black Lever (4592 / 4593)

×3

Brick, Modified 1 x 2 x 2/3 with Studs on Sides and Extended Stud Receptacle

Plate, Modified 1 x 2 with Bar Arm Up (Horizontal Arm 5mm)

×2

Brick, Modified 1 x 1 with Studs on 4 Sides

×2

Bar 1 x 3 with Clip and Stud Holder (Robot Arm)

Container, Treasure Chest Bottom with Slots in Back

Container, Treasure Chest Lid Curved with Thick Hinge

Cockpit 10 x 6 x 2 Curved

Wedge 2 x 4 Triple

Boat, Ship's Wheel with Slotted Pin

Panel 1 x 2 x 1 with Rounded Corners

×2

Bar 1L with Clip Mechanical Claw - Cut Edges and Hole on Side

×3

Bar 1L with Clip Mechanical Claw - Cut Edges and Hole on Side

×6

Plant Thallus / Seaweed / Coral

×3

Dolphin, Friends Style, Baby Jumping with Black Eyes, Upper Eyelids Pattern

Friends Accessories, Marine Life, 12 in Bag (Multipack)

Plate, Modified 1 x 1 with Tooth Horizontal

Windscreen 6 x 6 x 3 Canopy Dome Half Sphere with Dual 2 Fingers

Slope, Curved 3 x 1

×2

Wedge, Plate 2 x 4

Barb / Claw / Horn / Tooth - Small

×3

Cloth Treasure Map 3.5 x 3.5 (map becomes visible when wet)

Slope 30 1 x 1 x 2/3

×3

Slope 30 1 x 1 x 2/3

×4

Slope 30 1 x 1 x 2/3

×3

Brick, Round 2 x 2 Dome Top

×2

Brick, Round 2 x 2 Dome Top

×2

Propeller 3 Blade 3 Diameter with Axle Hole

×3

Plate, Modified 1 x 2 with 2 Open O Clips (Horizontal Grip)

Brick, Modified 1 x 1 with Open O Clip (Vertical Grip) - Hollow Stud

×2

Plate, Modified 1 x 2 with Bar Handle on End

×2

Panel 1 x 4 x 3 with Side Supports - Hollow Studs

Slope, Curved 2 x 4 x 1 1/3 with 4 Recessed Studs

×2

Slope, Curved 2 x 1 x 1 1/3 with Recessed Stud

×2

Container, Box 2 x 2 x 2 - Top Opening

Arch 1 x 4 x 2

×3

Arch 1 x 6 x 2 Curved Top

Technic, Pin Connector Round 2L with Slot (Pin Joiner Round)

×4

Technic, Pin Connector Round 2L with Slot (Pin Joiner Round)

×2

Bar 6L with Stop Ring

Technic, Axle Connector 2L (Smooth with x Hole + Orientation)

×2

Technic, Brick 1 x 1 with Hole

×4

Tile 1 x 6

Plate, Round 1 x 1 with Open Stud

×2

Tile 2 x 4

Brick, Round 4 x 4 with Hole

Brick, Modified 1 x 1 with Stud on Side

×2

Panel 1 x 2 x 2 with Side Supports - Hollow Studs

×4

Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper)

Minifigure, Utensil Syringe

×2

Bar 3L (Bar Arrow)

×2

Arch 1 x 3 x 2 with Curved End

×5

Brick, Round Corner 3 x 3 x 2 Dome Top

×2

Plate, Modified 4 x 6 with Trap Door Hinge (Long Pins)

Plate, Modified 1 x 2 with Clip with Center Cut on Top

×4

Plate, Modified 1 x 2 with Clip with Center Cut on Top

×3

Slope 45 2 x 1 with 2/3 Cutout

×2

Minifigure, Utensil Bottle

Tile, Round 1 x 1

×5

Tile, Round 1 x 1

×2

Arm Mechanical, Exo-Force / Bionicle, Thick Support

×2

Minifigure, Utensil Handlebars with Angular Handles

Dolphins Rescue Mission

About Dolphins Rescue Mission

Part-out value

Seller notes

Minifigures in Dolphins Rescue Mission (2)

Parts (184)

Common questions about Dolphins Rescue Mission

How much is LEGO Dolphins Rescue Mission (41378-1) worth?

What minifigures come in LEGO set 41378-1?

Is it worth parting out LEGO Dolphins Rescue Mission?

Is LEGO Dolphins Rescue Mission (41378-1) retired?

How do I check if my Dolphins Rescue Mission set is complete?

More Friends sets

Explore more

Company

Legal