How much is LEGO Friendship Tree House (41703-1) worth?

Friendship Tree House sells for an average of $49.90 used and $88.93 new/sealed on BrickLink based on 6 months of completed sales. As a retired set, prices tend to hold steady or appreciate over time, especially for complete sets with original packaging. Actual prices vary with completeness. Missing minifigures or key parts will lower the value.

What minifigures come in LEGO set 41703-1?

This set includes 4 minifigures: Friends Mia - Blue Overalls, Yellow Blouse and Sand Green Boots ($1.36), Friends Olivia (Nougat) - White Bee Suit and Black Boots ($1.37), Friends River - Sand Blue Shoes, Black Jeans, Red Checkered Shirt with White Undershirt ($1.40), Friends Jackson - Red Shoes, Blue Trousers, Red Vest, Sand Blue Undershirt, White Sleeves ($1.36). The minifigures have a combined BrickLink value of $5.49. Each figure is linked above with individual pricing if you're looking to buy or sell specific characters.

Is it worth parting out LEGO Friendship Tree House?

The minifigures make up about 11% of the set value ($5.49 out of $49.90). Most of the value is in the complete set package, so selling it whole is likely the better move unless you have buyers lined up for specific figures.

Is LEGO Friendship Tree House (41703-1) retired?

Yes, Friendship Tree House was released in 2022 and has been retired from retail for several years. Retired LEGO sets are only available on the secondary market through BrickLink, eBay, or other resale platforms.

How do I check if my Friendship Tree House set is complete?

Use the parts list on this page to check every piece and all 4 minifigures. For the minifigures specifically, you can use the brick'em scanner to identify each figure from a photo and confirm it matches what should be in this set. Missing pieces can be individually sourced on BrickLink.

Friendship Tree House

41703-1·Friends·2022·4 minifigs·343 parts

Used Avg

$49.90

New Avg

$88.93

Add to your inventory Scan the minifigs

About Friendship Tree House

Friendship Tree House (41703-1) is a LEGO Friends set released in 2022, currently averaging $49.90 used on BrickLink. It comes with 4 minifigures worth a combined $5.49. The set has retired from retail, so secondary market is the only option. The full parts inventory runs 343 pieces.

Parts (343)

Plate, Modified 2 x 2 with Pin Hole - Full Cross Support Underneath

×2

Technic, Gear 8 Tooth with Dual Face

Bar Holder with Clip

Slide Playground 7 x 12 x 8 1/3 Curved 180 degrees

Slope, Curved 2 x 1 x 2/3

×2

Slope, Curved 2 x 1 x 2/3

×2

Technic, Liftarm Thin 1 x 5 - Axle Holes

×2

Minifigure, Utensil Paint Roller Brush Handle

×2

Arch 1 x 3 x 3

×14

Brick 1 x 1 x 3

×8

Panel 1 x 4 x 2 with Side Supports - Hollow Studs

Technic, Liftarm, Modified H-Shape Thick 3 x 5 Perpendicular

×2

Tile, Round 2 x 2 with Bottom Stud Holder

×3

Tile, Round 2 x 2 with Bottom Stud Holder

Tile, Round 2 x 2 with Bottom Stud Holder with Sliced Pizza with Red Tomato Sauce, Yellow Cheese, Dark Red Pepperoni, Black Olives, and Green Bell Peppers Pattern

Slope, Curved 2 x 2 x 2/3

×3

Slope, Curved 2 x 2 x 2/3

×8

Slope, Curved 2 x 2 x 2/3

×6

Technic, Pin with Friction Ridges and Pin Hole

Road Sign 2 x 2 Square with Open O Clip

Arch 1 x 6 x 2 - Medium Thick Top without Reinforced Underside

×2

Fence 1 x 4 x 2 Spindled with 4 Studs

×5

Technic, Axle 5L with Stop

×2

Tile, Round 2 x 2 with Hole

×3

Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)

×7

Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)

×2

Technic, Liftarm Thick 1 x 1 (Spacer)

×2

Tile, Round 2 x 2 with Open Stud

×2

Window 1 x 4 x 1 2/3 with Spoked Rounded Top

×2

Brick, Round 1 1/2 x 1 1/2 x 2/3 Dome Top

×2

Fence 4 x 4 x 2 Quarter Round Spindled with 3 Studs

×3

Brick, Modified 1 x 2 x 1 2/3 with Studs on Side

×14

Plate, Round Half 4 x 8

×2

Technic, Axle and Pin Connector Hub with 1L Axle

×4

Arch 1 x 5 x 4 - Continuous Bow

Brick 2 x 2 Corner

×4

Panel 1 x 2 x 1 with Rounded Corners and 2 Sides

Tile, Modified 1 x 2 Grille with Bottom Groove

Plant Leaves 6 x 5

×9

Plate 2 x 2 Corner

×5

Slope, Curved 2 x 1 x 2/3 Inverted

×5

Plant Leaves 4 x 3

Hinge Plate 1 x 4 Swivel (2429 / 2430)

Tile 1 x 4

×2

Tile 1 x 4

×5

Tile 1 x 4

×7

Tile 1 x 4

×14

Wheel Wheelchair with Molded Black Hard Rubber Tire Pattern

×4

Tile, Modified 1 x 2 with Bar Handle

Brick 1 x 2 x 5

×3

Brick 1 x 16

Plate, Round 1 x 1 with Flower Edge (5 Petals)

×4

Plate, Round 1 x 1 with Flower Edge (5 Petals)

×26

Wheel Skateboard / Trolley

Plate, Modified 1 x 2 with Bar Handle on Side - Free Ends

×2

Minifigure, Utensil Musical Instrument, Guitar Acoustic with Silver Strings and Black Tuning Knobs Pattern

Plate, Round 2 x 2 Thin with Wheel Holder

Tile 2 x 3

×3

Tile, Round Corner 4 x 4 Macaroni

×3

Technic, Pin with Short Friction Ridges

×3

Brick, Modified 1 x 2 with Grille / Fluted Profile

×3

Brick 2 x 3

×4

Brick 2 x 2

×2

Brick 1 x 2

×2

Brick 1 x 2

×4

Brick 1 x 2

×7

Brick 1 x 2

×13

Brick 1 x 1

×17

Brick 1 x 6

Brick 1 x 4

×3

Brick 1 x 4

×12

Brick 1 x 4

Chain 21 Links (16-17L)

×2

Brick, Modified 1 x 2 with Log Profile

×23

Brick, Modified 1 x 4 with Log Profile

×11

Brick 2 x 2 x 3

×3

Container, Crate 3 x 4 x 1 2/3 with Handholds

Plate 2 x 4

×4

Plate 2 x 4

×3

Plate 2 x 4

×2

Plate 2 x 4

×4

Plate 2 x 4

×2

Plate 2 x 4

×8

Plate 2 x 3

×2

Plate 2 x 3

×3

Plate 2 x 2

×4

Plate 2 x 2

×14

Plate 1 x 2

×8

Plate 1 x 2

×3

Plate 1 x 2

×4

Plate 1 x 2

×23

Plate 1 x 2

×3

Plate 1 x 1

×5

Plate 1 x 1

×2

Plate 1 x 1

×7

Plate 1 x 1

×3

Plate 1 x 1

×15

Plate 6 x 12

×2

Plate 4 x 4

×5

Plate 4 x 6

×2

Plate 2 x 8

Plate 4 x 8

Plate, Round Corner 3 x 3

×2

Plate, Round Corner 3 x 3

×2

Plate 6 x 8

Slope 45 2 x 2

Slope 45 2 x 1

Panel 1 x 4 x 1

×2

Plate, Round Corner 4 x 4

×2

Brick, Round 1 x 1

×4

Brick, Round 1 x 1

×34

Brick, Round 1 x 1

×3

Tile 2 x 2

×6

Tile 2 x 2

×4

Tile 2 x 2

×2

Tile 2 x 2

Tile 2 x 2 with Beehive Frame with Orange and Yellow Honeycomb, Small Bees with White Wing Pattern

Tile 1 x 2

×3

Tile 1 x 2

×11

Tile 1 x 2

×4

Tile 1 x 2

×2

Tile 1 x 2

×3

Tile 1 x 2 with Cell Phone / Smartphone with Speech Bubble, Note, Play Button, Signal Strength, WiFi and Battery Level Symbols Pattern

Tile 1 x 2 with Computer Keyboard Blank Keys Pattern

Tile 1 x 1

×2

Tile 1 x 1

×2

Tile 1 x 1

×3

Cylinder Quarter 2 x 2 x 5 with 1 x 1 Cutout

×7

Plate, Modified 2 x 3 with Hole

Technic, Brick 1 x 2 with Holes

Technic, Plate 2 x 6 with 5 Holes

×6

Technic, Axle and Pin Connector Angled #1

×2

Plate, Modified 1 x 2 with Door Rail

×2

Technic, Axle 2L Notched

×2

Technic, Plate Rotor 3 Blade with Smooth Ends and 6 Studs (Propeller)

Brick 1 x 2 x 2 with Inside Stud Holder

×3

Technic, Pin Connector Plate 1 x 2 x 1 2/3 with 2 Holes on Top

×4

Technic, Pin 3L without Friction Ridges

×4

Plant Plate, Round 1 x 1 with 3 Layered Leaves

×11

Plant Plate, Round 1 x 1 with 3 Layered Leaves

×18

Plant Plate, Round 1 x 1 with 3 Layered Leaves

×17

Slope, Curved 2 x 2 x 2/3 Inverted

×3

Bar 1L with 1 x 1 Round Plate with Hollow Stud

×2

Bar 1L with 1 x 1 Round Plate with Hollow Stud

×2

Technic, Gear Worm Screw, Long, Axle Opening Type II

Brick, Modified 1 x 1 x 1 2/3 with Studs on Side

×6

Carrot / Club

Plant Stem with Bar (Carrot Top / Twig)

×13

Tile, Modified 2 x 2 with Studs on Edge

Bunny / Rabbit, Friends Style, Sitting with Green Eyes, Black Nose and Mouth, and Bright Pink Tongue Pattern

Plate 6 x 14

×3

Plate 1 x 8

×4

Plate 1 x 8

×3

Plate, Round 1 x 2 with Open Studs

×6

Cone 2 x 2 x 1 2/3 with Stacked Rings (Beehive / Cotton Candy)

×2

Brick 1 x 3

×2

Brick 1 x 3

×9

Brick 1 x 3

×7

Plate 1 x 3

×4

Plate 1 x 3

×12

Fence 1 x 4 x 1 Lattice

×2

Slope, Inverted 45 2 x 2 with Flat Bottom Pin

Slope, Inverted 45 2 x 1

×6

Slope, Inverted 45 2 x 1

Plate 1 x 6

×3

Plate 1 x 6

×2

Plate 1 x 6

×2

Technic, Pin without Friction Ridges

×6

Slope, Inverted 45 2 x 2 Double Convex

Bracket 1 x 1 - 1 x 1 Inverted

Bracket 1 x 1 - 1 x 1

Technic, Brick 1 x 2 with Hole

×3

Technic, Brick 1 x 2 with Hole

×2

Technic, Plate 2 x 4 with 3 Holes

×3

Plate 1 x 4

×9

Plate 1 x 4

×16

Slope, Inverted 33 3 x 2 with Flat Bottom Pin and Connections between Studs

Plate 2 x 6

×2

Plate 2 x 10

Minifigure, Utensil Cup

×2

Minifigure, Utensil Cup

×2

Minifigure, Headgear Crown Eggshell with 5 Points and Center Stud

Brick, Round 2 x 2 with Axle Hole

Bracket 2 x 2 - 2 x 2 with 2 Holes

×3

Antenna 4H - Flat Top

Plate, Round 2 x 2 with Axle Hole

×6

Plate, Round 2 x 2 with Axle Hole

×2

Plate, Round 2 x 2 with Axle Hole

×3

Plate, Round 2 x 2 with Axle Hole

×4

Dinosaur Tail / Neck Middle Section with Bar Hole and Technic Pin

×2

Plate, Round 1 x 1

×2

Plate, Round 1 x 1

×4

Plate, Round 1 x 1

×5

Plate, Modified 1 x 1 with Open O Clip Thick (Vertical Grip)

×2

Plate 8 x 8

Tile 1 x 8

×2

Tile 1 x 8

×3

Bracket 2 x 2 - 1 x 2 Centered

Sticker Sheet for Set 41703 - (84123/6373977)

Plate, Modified 1 x 4 with 2 Studs with Groove

×3

Bird, Small with Black Eyes and Bright Light Orange Beak Pattern

Technic Bush 1/2 Smooth

×6

Technic Bush 1/2 Smooth

×3

Technic, Pin 1/2 without Friction Ridges

×5

Plate 2 x 16

Slope 33 3 x 1

×3

Slope 33 3 x 1

×4

Slope, Inverted 33 3 x 1

×2

Technic, Axle 1L with Pin with Friction Ridges

×5

Container, Box 2 x 2 x 2

Container, Box 2 x 2 x 2 Door with Slot

Technic, Axle 7L

Bracket 1 x 2 - 2 x 2

Plate 1 x 10

×2

Plate, Modified 1 x 2 with Open O Clip on Top

Minifigure, Utensil Tool Mallet / Hammer

Container, Cupboard 2 x 3 x 2 - Hollow Studs

Container, Cupboard 2 x 3 Drawer

Cone 1 x 1 with Top Groove

×3

Cone 1 x 1 with Top Groove

×4

Cone 1 x 1 with Top Groove

×2

Antenna Small Base with Black Lever (4592 / 4593)

×2

Tap 1 x 1 without Hole in Nozzle End

×2

Plate, Modified 2 x 2 with Wheels Holder

Plate, Modified 1 x 2 with Bar Arm Up (Horizontal Arm 5mm)

×2

Plate, Modified 1 x 2 with Bar Handle on Side - Closed Ends

×2

Plate, Modified 1 x 2 with Bar Handle on Side - Closed Ends

×2

Panel 1 x 2 x 1 with Rounded Corners

×2

Panel 1 x 2 x 1 with Rounded Corners

Tricycle Frame

Slope 30 1 x 1 x 2/3

×9

Slope 30 1 x 1 x 2/3

×5

Technic, Axle 8L with Stop

×2

Cylinder Quarter 3 x 3 x 5 with 1 x 1 Cutout and 2 Arch Tops

×4

Plate, Modified 1 x 2 with 2 Open O Clips (Horizontal Grip)

×4

Brick, Modified 1 x 1 with Open O Clip (Vertical Grip) - Hollow Stud

×2

Plate, Modified 1 x 2 with Bar Handle on End

×3

Plate 1 x 12

Technic, Liftarm Thick 1 x 2 - Axle Hole

Brick, Modified 1 x 1 x 3 with 2 Clips (Vertical Grip) - Hollow Stud

×2

Window 1 x 2 x 3 Flat Front

Window 1 x 4 x 3 - No Shutter Tabs

×3

Door, Frame 1 x 4 x 6 with 2 Holes on Top and Bottom

Glass for Window 1 x 2 x 3 Flat Front

Pane for Window 1 x 2 x 3 with Thick Corner Tabs

×6

Door 1 x 4 x 6 with 4 Panes and Stud Handle

Shutter for Window 1 x 2 x 3 with Hinges and Handle

×2

String Reel 2 x 2 x 1 Drum with Axle Hole

Slope, Curved 4 x 1

×3

Arch 1 x 4 x 2

Bar 1 x 4 x 3 Grille with End Protrusions

×2

Technic, Pin Connector Round 2L with Slot (Pin Joiner Round)

×4

Cylinder Half 2 x 4 x 4

×2

Bar 6L with Stop Ring

Technic, Axle and Pin Connector Perpendicular

×2

Technic, Axle Connector 2L (Smooth with x Hole + Orientation)

×2

Technic, Brick 1 x 1 with Hole

×6

Brick, Round 2 x 2 D. 45 degrees Elbow (25.5mm Standing Height)

×2

Plate, Modified 2 x 4 with 2 Studs (Double Jumper)

×2

Technic, Gear 12 Tooth Bevel

×2

Tile 1 x 6

×4

Plate, Modified 1 x 2 with Wheel Holder, Reinforced Underside

×2

Cylinder Half 1 x 2 x 1

×8

Plate, Round Corner 3 x 3 with 2 x 2 Curved Cutout

×2

Minifigure, Headgear Hat, Beekeeper with Molded Trans-Brown Visor Pattern

Minifigure, Utensil Fork

×2

Minifigure, Utensil Cupcake Liner - Flat Top

Flag 2 x 2 Square with Flared Edge

×2

Elephant Tail / Trunk with Bar End - Long Straight Tip

×5

Butterfly / Moth with Stud Holder

Mini Doll, Head Friends with Green Eyes, Black Eyebrows, Open Mouth Lopsided Smile and Freckles Pattern

Mini Doll, Head Friends Male Large with Reddish Brown Eyes, Black Eyebrows and Scared Open Mouth Pattern

Brick, Round Corner 2 x 2 Macaroni with Stud Notch and Reinforced Underside

×4

Plate, Round 1 x 1 with Open Stud

×5

Plate, Round 1 x 1 with Open Stud

×19

Plate, Round 1 x 1 with Open Stud

×4

Slope 30 1 x 2 x 2/3

×3

Slope 30 1 x 2 x 2/3

×2

Tile 2 x 4

×2

Tile 2 x 4

×5

Tile 2 x 4

Brick, Modified 1 x 1 with Stud on Side

×9

Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper)

Bar 3L (Bar Arrow)

×2

Plate 8 x 16

Wheel Bicycle with Molded Black Hard Rubber Tire Pattern

Slope 45 2 x 1 with 2/3 Cutout

Brick, Round 2 x 2 with Axle Hole and Grille / Fluted Profile

Arm Skeleton, Bent with Clips at 90 degrees (Vertical Grip)

Minifigure, Utensil Basket - Flexible Rubber

Panel 1 x 2 x 1 with Rounded Corners and Center Divider

Slope, Curved 4 x 1 x 2/3 Double

Bracket 1 x 2 - 2 x 4

Arm Skeleton, Bent with Clips (Horizontal Grip)

×2

Brick and Axle Separator

Tile, Round 1 x 1

×7

Tile, Round 1 x 1

×2

Tile, Round 1 x 1

×2

Tile, Round 1 x 1 with Cookie with Tan Frosting and Reddish Brown Chocolate Sprinkles Pattern

×2

Tile, Round 1 x 1 with Dark Bluish Gray Outlined Number 5 on Silver Background Coin Pattern

×2

Tile, Round 1 x 1 with Ladybug, Large White Eyes with Black Pupils Pattern

×2

Tile, Round 1 x 1 with Black and Yellow Bee Pattern

×5

Minifigure, Utensil Handlebars with Angular Handles

Bracket 1 x 2 - 1 x 2 Inverted

×2

String, Cord Thin 50cm

Friendship Tree House

About Friendship Tree House

Part-out value

Seller notes

Minifigures in Friendship Tree House (4)

Parts (343)

Common questions about Friendship Tree House

How much is LEGO Friendship Tree House (41703-1) worth?

What minifigures come in LEGO set 41703-1?

Is it worth parting out LEGO Friendship Tree House?

Is LEGO Friendship Tree House (41703-1) retired?

How do I check if my Friendship Tree House set is complete?

More Friends sets

Explore more

Company

Legal