How much is LEGO Mars Space Base and Rocket (42605-1) worth?

Mars Space Base and Rocket sells for an average of $43.00 used and $51.74 new/sealed on BrickLink based on 6 months of completed sales. Current retail availability may affect secondary market prices. Actual prices vary with completeness. Missing minifigures or key parts will lower the value.

What minifigures come in LEGO set 42605-1?

This set includes 4 minifigures: Alien - Dome Top Head ($1.11), Friends Olivia (Adult) - Astronaut, Reddish Orange Spacesuit ($2.22), Friends Aveline - Mission Commander ($1.00), Friends Julian (Adult) - Astronaut, Reddish Orange Spacesuit ($1.58). The minifigures have a combined BrickLink value of $5.92. Each figure is linked above with individual pricing if you're looking to buy or sell specific characters.

Is it worth parting out LEGO Mars Space Base and Rocket?

The minifigures make up about 14% of the set value ($5.92 out of $43.00). Most of the value is in the complete set package, so selling it whole is likely the better move unless you have buyers lined up for specific figures.

Is LEGO Mars Space Base and Rocket (42605-1) retired?

Mars Space Base and Rocket was released in 2024. It may still be available at some retailers, but check availability. Retirement could be approaching.

How do I check if my Mars Space Base and Rocket set is complete?

Use the parts list on this page to check every piece and all 4 minifigures. For the minifigures specifically, you can use the brick'em scanner to identify each figure from a photo and confirm it matches what should be in this set. Missing pieces can be individually sourced on BrickLink.

Mars Space Base and Rocket

42605-1·Friends·2024·4 minifigs·334 parts

Used Avg

$43.00

New Avg

$51.74

Add to your inventory Scan the minifigs

About Mars Space Base and Rocket

Mars Space Base and Rocket (42605-1) is a LEGO Friends set released in 2024, currently averaging $43.00 used on BrickLink. It comes with 4 minifigures worth a combined $5.92. It may still be available at retail from LEGO or authorized retailers. The full parts inventory runs 334 pieces.

Parts (334)

Technic, Gear 8 Tooth with Dual Face

Bar Holder with Clip

Plate 3 x 3

×6

Plate, Round 6 x 6 with Hole

Tile, Round 1 x 2 Oval

Plate, Modified 1 x 2 with Pin Hole on Top

×2

Plate, Modified 1 x 2 with Clip on Side (Horizontal Grip)

×4

Slope, Curved 2 x 1 x 2/3

×6

Slope, Curved 2 x 1 x 2/3

×4

Brick 1 x 1 x 3

×2

Panel 1 x 4 x 2 with Side Supports - Hollow Studs

Tile 2 x 2 Corner

×4

Slope, Curved 2 x 2 x 2/3

×11

Slope, Curved 2 x 2 x 2/3

×3

Road Sign 2 x 2 Square with Open O Clip

×5

Arch 1 x 6 x 2 - Medium Thick Top without Reinforced Underside

×3

Tile, Round 2 x 2 with Hole

×3

Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)

×2

Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)

×2

Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)

×4

Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)

Tile, Modified 1 x 1 with Open O Clip

×4

Tile, Modified 1 x 1 with Open O Clip

×4

Plate, Round 1 x 2 Half with 1 Stud (Jumper)

Tile, Round 1 x 2 Half

×3

Plate, Round Half 3 x 6 with 1 x 2 Cutout

×2

Tile, Round 2 x 2 with Open Stud

Plate, Modified 1 x 2 with Pin Hole on Bottom

×2

Minifigure, Utensil Ice Axe - 3-Rib Handle

×2

Plate, Round Corner 2 x 6 Double

×2

Tile, Round 1 x 1 with Bar and Small Pin Hole

×6

Tile, Round 1 x 1 with Bar and Small Pin Hole

×4

Bar 1L with Tow Ball

Brick, Modified 1 x 2 x 1 2/3 with Studs on Side

×2

Bar Holder with Handle

×5

Tile, Modified 1 x 2 Grille with Bottom Groove

×4

Plant Leaves 6 x 5

Plate 2 x 2 Corner

×8

Plate 2 x 2 Corner

×2

Propeller 3 Blade Small

Tile, Round 1 x 1 Half Circle Extended

×2

Tile, Round 1 x 1 Half Circle Extended

×3

Slope, Curved 3 x 2

×3

Tile 1 x 4

×2

Tile 1 x 4

×5

Tile 1 x 4

×3

Technic, Axle 3L with Stop

Tile, Modified 1 x 2 with Bar Handle

×2

Wedge, Plate 3 x 3 Cut Corner

×2

Brick 1 x 1 x 5 - Solid Stud

×8

Brick 2 x 6

Plate, Modified 2 x 2 with Pin on Bottom

×2

Plate, Round 1 x 1 with Flower Edge (5 Petals)

×4

Plate, Round 1 x 1 with Flower Edge (5 Petals)

×2

Tile, Round 1 x 1 Quarter

×5

Tile, Round 1 x 1 Quarter

×3

Tile, Round 1 x 1 Quarter

×5

Plate, Round 1 x 1 with Bar Handle

×4

Cat, Friends Style, Large, Sitting with Dark Tan Markings, Olive Green Eyes, Tan Face and Silver Mask, Ears and Toes Pattern (Space Cat Jones)

Plate, Round 2 x 2 with Rounded Bottom (Boat Stud)

×2

Tile 2 x 3

×4

Turntable 2 x 2 Square Base

Technic, Pin with Short Friction Ridges

×22

Tile, Round Corner 2 x 2 Macaroni

×4

Tile, Round Corner 2 x 2 Macaroni

×4

Plate, Modified 2 x 2 with Pin Holes

×2

Brick, Modified 1 x 2 with Grille / Fluted Profile

×4

Brick 2 x 4

×4

Brick 2 x 3

Brick 2 x 2

Brick 1 x 2

×3

Brick 1 x 2

×2

Brick 1 x 1

Minifigure, Utensil Camera Handheld Style with Extended Bar Handle

×2

Brick 1 x 6

Brick 1 x 4

×2

Brick 1 x 4

×3

Brick, Modified 1 x 2 with Log Profile

×4

Minifigure, Utensil Binoculars Town

×2

Plate 2 x 4

×8

Plate 2 x 3

×11

Plate 2 x 3

×4

Plate 2 x 3

×3

Plate 2 x 2

×5

Plate 2 x 2

×4

Plate 2 x 2

×2

Plate 2 x 2

×2

Plate 1 x 2

×15

Plate 1 x 2

×4

Plate 1 x 2

×6

Plate 1 x 2

×12

Plate 1 x 2

Plate 1 x 1

×5

Plate 1 x 1

×5

Plate 1 x 1

×23

Plate 1 x 1

×5

Plate 1 x 1

×3

Rock 4 x 4 Octagonal Boulder, Top

Rock 4 x 4 Octagonal Boulder, Bottom

Plate 4 x 6

Plate 2 x 8

×2

Plate, Round Corner 3 x 3

×4

Plate 6 x 8

Bar 4L (Lightsaber Blade / Wand)

Arm Mechanical, Battle Droid

×7

Slope 45 2 x 2

×2

Slope 45 2 x 2

Slope 45 2 x 1

×8

Plate, Round Corner 4 x 4

×4

Brick, Modified 2 x 4 with Pin on Top and Side Cutouts

×2

Brick, Round 1 x 1

×16

Brick, Round 1 x 1

×4

Brick, Round 1 x 1

Vehicle, Steering Wheel Small, 2 Studs Diameter

Tile 2 x 2

Tile 1 x 2

×2

Tile 1 x 2

×3

Tile 1 x 2 with Computer Keyboard Blank Keys Pattern

Tile 1 x 2 with Dark Turquoise EMT Star of Life Pattern

Tile 1 x 1

×3

Tile 1 x 1

×5

Tile 1 x 1 with Silver Keypad Buttons, Medium Azure Screen and Red Light (Calculator) Pattern

×2

Tile 1 x 1 with White and Red Gauge, Black Thin Needle, and Rivets Pattern

×2

Cylinder Quarter 2 x 2 x 5 with 1 x 1 Cutout

Technic, Brick 1 x 2 with Holes

×4

Technic, Axle 5L

Technic, Gear 20 Tooth Double Bevel

Technic, Gear 12 Tooth Double Bevel

Brick 1 x 2 x 2 with Inside Stud Holder

×4

Technic Ball Joint

×3

Plant Plate, Round 1 x 1 with 3 Layered Leaves

Slope, Curved 2 x 2 x 2/3 Inverted

×3

Bar 1L with 1 x 1 Round Plate with Hollow Stud

×2

Brick, Modified 1 x 1 x 1 2/3 with Studs on Side

×14

Carrot / Club

×2

Windscreen 6 x 6 x 1 1/3 Curved

Brick, Round 1 x 1 x 2/3 Half Circle Extended with Stud on Side

×2

Brick, Round 1 x 1 x 2/3 Half Circle Extended with Stud on Side

Plate, Modified 1 x 3 with 2 Studs (Double Jumper)

×2

Plate 1 x 8

×6

Panel 3 x 3 x 2 Corner Convex

×2

Plate, Round 1 x 2 with Open Studs

×4

Plate, Round 1 x 2 with Open Studs

×8

Plate, Round 1 x 2 with Open Studs

×2

Plate, Round 1 x 2 with Open Studs

×8

Slope, Curved 4 x 1 x 1 2/3

×4

Brick 1 x 3

×5

Plate 1 x 3

×11

Plate 1 x 3

×2

Plate 1 x 3

×3

Slope, Inverted 45 2 x 1

×3

Plate 1 x 6

×2

Plate 1 x 6

×4

Technic, Pin without Friction Ridges

×5

Turntable 2 x 2 Plate, Top

Turntable 2 x 2 Plate, Base

Bracket 1 x 1 - 1 x 1 Inverted

Bracket 1 x 1 - 1 x 1

Technic, Brick 1 x 2 with Hole

×2

Technic, Brick 1 x 2 with Hole

×2

Technic, Brick 1 x 4 with Holes

×11

Plate 1 x 4

×4

Plate 1 x 4

×3

Plate 1 x 4

×12

Technic, Plate 2 x 8 with 7 Holes

Technic, Gear Rack 1 x 4

Plant Stem with Bar, 3 Leaves, and Small Pin Hole

×3

Plate 2 x 6

×8

Plate 2 x 6

×2

Technic, Brick 1 x 6 with Holes

×7

Minifigure, Utensil Cup

×3

Brick, Round 2 x 2 with Axle Hole

×2

Brick, Round 2 x 2 with Axle Hole

Cone 4 x 4 x 2 with Axle Hole

Antenna 4H - Flat Top

×2

Plate, Round 2 x 2 with Axle Hole

×4

Plate, Round 2 x 2 with Axle Hole

×7

Plate, Round 1 x 1

×3

Plate, Round 1 x 1

×7

Plate, Round 1 x 1

×2

Plate, Round 1 x 1

×2

Hinge Brick 2 x 2 Locking with 2 Fingers Vertical and Axle Hole

Plate, Modified 8 x 8 with Grille and Hole in Center

Plate, Round 8 x 8 Rounded End

×2

Window 1 x 6 x 6 Flat Front

×2

Sticker Sheet for Set 42605 - (10106055/6466619)

Technic, Axle 1L with Pin with Friction Ridges

×2

Wedge 6 x 4 Triple Curved

×2

Dish 3 x 3 Inverted (Radar)

×2

Dish 6 x 6 Inverted (Radar) - Solid Studs

Plate, Modified 1 x 2 with Open O Clip on Top

×4

Technic, Axle 3L

Minifigure, Utensil Frying Pan

Tap 1 x 1 without Hole in Nozzle End

×2

Dish 2 x 2 Inverted (Radar)

×4

Plate, Modified 1 x 2 with Bar Handle on Side - Closed Ends

×3

Panel 1 x 2 x 1 with Rounded Corners

×2

Bar 1L with Clip Mechanical Claw - Cut Edges and Hole on Side

Panel 1 x 6 x 4 1/3 with Window and 4 Pin Holes

×3

Panel 6 x 5 x 3 1/3 Curved Top

Windscreen 6 x 6 x 3 Canopy Dome Half Sphere with Dual 2 Fingers

Slope, Curved 3 x 1

×12

Aircraft Fuselage Forward Bottom Curved 6 x 8 with 2 Holes and 2 Pin Holes

Pumpkin / Gourd

Mini Doll, Headgear Helmet Space, Friends Astronaut with 4 Studs on Back

×3

Slope, Inverted 45 6 x 1 Double with 1 x 4 Cutout

Hinge Cylinder 1 x 2 Locking with 1 Finger and Axle Hole on Ends without Slots

Slope, Curved 8 x 8 x 2 Inverted Double

Slope 30 1 x 1 x 2/3

×3

Wheel 18 x 14 Smooth

×4

Bar with Light Cover (Bulb) / Bionicle Barraki Eye

×3

Brick, Round Corner 10 x 10 with Slope 33 Edge, Axle Hole, Facet Cutout

×2

Panel 1 x 6 x 5

×2

Plate, Round Corner 6 x 6

×2

Plate, Round Corner 6 x 6

Arch 1 x 3 x 2 Curved Top

×8

Plate, Modified 1 x 2 with 2 Open O Clips (Horizontal Grip)

Plate, Round 4 x 4 with Hole

×4

Plate, Modified 1 x 2 with Bar Handle on End

×6

Panel 1 x 4 x 3 with Side Supports - Hollow Studs

×4

Window 1 x 4 x 3 - No Shutter Tabs

×3

Door, Frame 1 x 4 x 6 with 2 Holes on Top and Bottom

×5

Slope, Curved 2 x 1 x 1 1/3 with Recessed Stud

×3

Plate, Modified 1 x 1 with Open O Clip (Horizontal Grip)

×3

Plate, Modified 1 x 1 with Open O Clip (Horizontal Grip)

×2

Technic, Pin Connector Round 2L with Slot (Pin Joiner Round)

Tile 1 x 3

×4

Plate, Modified 1 x 2 with Clip on End (Horizontal Grip)

×2

Bar 6L with Stop Ring

Technic, Brick 1 x 1 with Hole

×4

Bar 1L with Angled Hollow Stud

×2

Technic, Pin 3L with Friction Ridges

×2

Tile 1 x 6

Plate, Modified 6 x 6 with Rounded Corners and 4 Feet

Plate, Modified 1 x 2 with Wheel Holder, Reinforced Underside

Plant Flower Stem with Bar and 3 Stems Short

×3

Tile, Modified 4 x 4 with Rounded Corners and 4 Feet

Tile 2 x 6

Technic, Brick Modified 1 x 2 with Hole and 1 x 2 Plate

×2

Slope, Inverted 45 2 x 2 with Hollow Round Bottom Tube

Plate 3 x 3 Corner

×2

Plate, Round 1 x 3 with Open Studs

×2

Plate, Modified 1 x 1 with Bar Handles on Ends

×4

Bar 2L with Stop Ring

×2

Bar 2L with Stop Ring

×3

Plate 1 x 5

×2

Plate 1 x 5

×3

Plate 1 x 5

×2

Tile, Round Corner 3 x 3 Macaroni

×6

Tile, Round Corner 3 x 3 Macaroni

Plate, Round Corner 2 x 2 with 1 x 1 Cutout

×2

Plate, Round Corner 5 x 5 Macaroni

×2

Door 1 x 3 x 6 with Stud Handle

×2

Plate, Round 1 x 1 with Open Stud

×16

Plate, Round 1 x 1 with Open Stud

×2

Cylinder Half 2 x 4 x 5 with 1 x 2 Cutout

Slope 30 1 x 2 x 2/3

×2

Slope 30 1 x 2 x 2/3

×2

Brick, Modified 1 x 1 x 2/3 with Open Stud

×14

Tile 2 x 4

×4

Tile 2 x 4

×2

Tile 2 x 4

Brick, Modified 1 x 1 with Stud on Side

×3

Brick, Modified 1 x 1 with Stud on Side

Windscreen Quarter Dome, Bar Handles at Top and Bottom

×2

Panel 1 x 2 x 3 with Side Supports - Hollow Studs

×2

Panel 1 x 2 x 2 with Side Supports - Hollow Studs

×6

Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper)

Brick, Modified Facet 2 x 2

×2

Bar 3L (Bar Arrow)

×4

Minifigure, Visor Large with Trapezoid Area on Top

×3

Horn, Unicorn / Spiral

×2

Technic, Pin 1/2 with Friction Ridges

×5

Plate 2 x 14

Hinge Plate 2 x 2 Locking with 1 Finger on Top

×2

Slope 45 2 x 1 with 2/3 Cutout

×8

Panel 1 x 2 x 1 with Rounded Corners and Center Divider

×3

Slope, Curved 4 x 1 x 2/3 Double

×3

Slope, Curved 4 x 1 x 2/3 Double

×5

Arm Skeleton, Bent with Clips (Horizontal Grip)

Support 2 x 2 x 10 Girder Triangular Vertical - Type 4 - 3 Posts, 3 Sections

Brick and Axle Separator

Tile, Round 1 x 1

×4

Tile, Round 1 x 1

×3

Tile, Round 1 x 1

×2

Tile, Round 1 x 1

×3

Tile, Round 1 x 1

×11

Tile, Round 1 x 1

×2

Tile, Round 1 x 1 with Cookie with Tan Frosting and Reddish Brown Chocolate Sprinkles Pattern

×2

Tile, Round 1 x 1 with White Animal Paw Print on Reddish Brown Background Pattern

×2

Tile, Round 1 x 1 with Black and Metallic Pink Rechargeable Battery Symbol with Lightning Bolt Pattern

×2

Bracket 1 x 2 - 2 x 2 Inverted

×2

Bracket 1 x 2 - 2 x 2 Inverted

×4

Bracket 1 x 2 - 2 x 2 Inverted

×4

Minifigure, Utensil Ingot 1 x 2

×5

Bracket 1 x 2 - 1 x 2 Inverted

×8

Bracket 1 x 2 - 1 x 2 Inverted

×2

Bracket 1 x 2 - 1 x 2 Inverted

Bracket 1 x 2 - 1 x 2

×4

Bracket 1 x 2 - 1 x 2

×4

Mars Space Base and Rocket

About Mars Space Base and Rocket

Part-out value

Minifigures in Mars Space Base and Rocket (4)

Parts (334)

Common questions about Mars Space Base and Rocket

How much is LEGO Mars Space Base and Rocket (42605-1) worth?

What minifigures come in LEGO set 42605-1?

Is it worth parting out LEGO Mars Space Base and Rocket?

Is LEGO Mars Space Base and Rocket (42605-1) retired?

How do I check if my Mars Space Base and Rocket set is complete?

More Friends sets

Explore more

Company

Legal