About Ecto-1 & 2
Ecto-1 & 2 (75828-1) is a LEGO Ghostbusters set from 2016 that sells for around $80.91 used on BrickLink. It includes 6 minifigures with a combined resale value of $56.05 — that's 69% of the set's price in figures alone. The most valuable is Mayhem at $16.22. For sellers buying complete sets to part out, the minifig value here makes this one worth considering.
Part-out value
Minifig value: $56.05 out of $80.91 total (69%). Over half the set's resale value is in the figures. Sellers parting this set out should list the minifigs individually on BrickLink — they'll earn more than bundling everything together.
Seller notes
- 6 minifigures at $56.05 combined value. That's a solid minifig haul — consider listing the figures individually on BrickLink where per-figure prices tend to be highest.
Minifigures in Ecto-1 & 2 (6)
Parts (184)
Technic, Gear 8 Tooth with Dual Face
Dark Bluish Gray
Bar Holder with Clip
Dark Bluish Gray×2
Slope, Curved 2 x 1 x 2/3 with Red, Light Bluish Gray and Black Stripes Pattern
White×2
Slope, Curved 2 x 2 x 2/3 with Ghostbusters Logo Pattern
White×2
Slope, Curved 2 x 2 x 2/3 with Red, Light Bluish Gray and Black Stripes Pattern
White×14
Minifigure Hand Armor
Pearl Dark Gray
Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)
White
Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)
Reddish Brown×19
Tile, Modified 1 x 1 with Open O Clip
Black×2
Tile, Modified 1 x 1 with Open O Clip
Dark Bluish Gray×16
Tile, Modified 1 x 1 with Open O Clip
Light Bluish Gray×2
Brick 2 x 2 Corner
White×2
Tile, Modified 1 x 2 Grille with Bottom Groove
White
Tile, Modified 1 x 2 Grille with Bottom Groove
Black×3
Tile, Modified 1 x 2 Grille with Bottom Groove
Metallic Silver×2
Tile, Modified 1 x 2 Grille with Bottom Groove
Light Bluish Gray×5
Plate 2 x 2 Corner
Blue×4
Slope, Curved 2 x 1 x 2/3 Inverted
Black×4
Wedge, Plate 2 x 2 Left
White×4
Hinge Plate 1 x 4 Swivel (2429 / 2430)
Red
Wedge, Plate 2 x 2 Right
White×4
Tile 1 x 4
White×3
Plate, Round 1 x 1 with Bar Handle on Short Stem
Trans-Clear×3
Plate 4 x 4 Corner
White×2
Plate, Round 2 x 2 with Rounded Bottom (Boat Stud)
Black×3
Plate, Round 2 x 2 with Rounded Bottom (Boat Stud)
Light Bluish Gray×2
Technic, Pin with Short Friction Ridges
Black×3
Brick 2 x 4
Black
Brick 2 x 2
Reddish Brown×2
Brick 1 x 2
White×3
Brick 1 x 1
Red×2
Plate 2 x 4
Black
Plate 2 x 3
Light Bluish Gray×4
Plate 2 x 2
White×6
Plate 2 x 2
Red×2
Plate 1 x 2
White×7
Plate 1 x 2
Red×19
Plate 1 x 2
Dark Bluish Gray
Plate 1 x 2
Light Bluish Gray×9
Brick, Modified 1 x 2 with Open O Clip Thick (Vertical Grip)
Red×2
Plate 1 x 1
White×7
Plate 1 x 1
Black×2
Plate 1 x 1
Trans-Red×3
Plate 4 x 4
Dark Bluish Gray×2
Plate 4 x 6
Red
Plate 4 x 8
Black
Tile, Modified 2 x 3 with 2 Open O Clips
Red
Plate 6 x 8
Light Bluish Gray
Bar 4L (Lightsaber Blade / Wand)
Yellow
Brick, Modified 1 x 4 with Studs on Side
Yellow
Brick, Round 1 x 1
Trans-Light Blue
Brick, Round 1 x 1
Light Bluish Gray×3
Brick 1 x 2 without Bottom Tube
Trans-Brown
Tile 1 x 2
Black
Tile 1 x 2
Trans-Clear×2
Tile 1 x 2
Trans-Red×4
Tile 1 x 2
Trans-Orange×2
Tile 1 x 2 with 'ECTO-1' and 'NEW YORK' Pattern
Bright Light Orange×2
Tile 1 x 1
Yellow×2
Tile 1 x 1
Trans-Clear×2
Tile 1 x 1
Dark Bluish Gray×3
Tile 1 x 1
Light Bluish Gray×7
Plate, Modified 2 x 3 with Hole
Light Bluish Gray
Technic, Plate 1 x 5 with Smooth Ends, 4 Studs and Center Axle Hole
Black×2
Technic, Brick 4 x 4 Open Center
Light Bluish Gray
Brick 1 x 2 x 2 with Inside Stud Holder
Red×4
Technic, Brick 4 x 6 Open Center
Black
Plate 1 x 8
White×4
Plate 1 x 8
Black×4
Plate 1 x 3
Reddish Brown×4
Arch 1 x 4
Dark Brown
Slope, Inverted 45 2 x 1
Light Bluish Gray×2
Plate 1 x 6
Red×2
Plate 1 x 6
Light Bluish Gray×3
Plate 1 x 6
Reddish Brown×2
Technic, Brick 1 x 2 with Hole
Red
Technic, Brick 1 x 4 with Holes
Red
Plate 1 x 4
White×4
Plate 1 x 4
Red
Plate 1 x 4
Black×7
Plate 1 x 4
Light Bluish Gray
Plate 2 x 6
Red×3
Plate 2 x 6
Dark Bluish Gray
Vehicle, Steering Stand 1 x 2 with Black Steering Wheel
Black
Hinge Brick 1 x 2 Base
White×2
Hinge Brick 1 x 2 Base
Red×6
Hinge Brick 1 x 2 Top Plate
White×2
Brick, Round 2 x 2 with Axle Hole
White
Brick, Round 2 x 2 with Axle Hole
Trans-Yellow
Plate, Round 2 x 2 with Axle Hole
White
Plate, Round 2 x 2 with Axle Hole
Black×2
Plate, Round 2 x 2 with Axle Hole
Light Bluish Gray×2
Brick, Modified 1 x 1 with Headlight
White×4
Brick, Modified 1 x 1 with Headlight
Trans-Clear×4
Brick, Modified 1 x 1 with Headlight
Reddish Brown×2
Plate, Round 1 x 1
Yellow×5
Plate, Round 1 x 1
Trans-Clear×2
Plate, Round 1 x 1
Trans-Light Blue×2
Plate, Round 1 x 1
Light Bluish Gray×3
Plate, Modified 1 x 1 with Light Attachment - Thick Ring
Red
Plate, Modified 1 x 1 with Light Attachment - Thick Ring
Black
Wedge, Plate 4 x 2 Right
White
Wedge, Plate 4 x 2 Left
White
Minifigure Neck Bracket with Back Stud - Thin Back Wall
Black
Technic Bush 1/2 Smooth
Yellow×5
Technic, Pin 1/2 without Friction Ridges
Blue×3
Hinge Plate 1 x 2 Locking with 1 Finger on Side (Undetermined Type)
Light Bluish Gray×2
Plate 1 x 10
Light Bluish Gray×4
Antenna Small Base with Black Lever (4592 / 4593)
Black×2
Antenna Small Base with Black Lever (4592 / 4593)
Light Bluish Gray×4
Brick, Modified 1 x 2 x 2/3 with Studs on Sides and Extended Stud Receptacle
Light Bluish Gray
Tap 1 x 1 without Hole in Nozzle End
Black×2
Dish 2 x 2 Inverted (Radar)
White
Slope, Curved 2 x 2 x 2/3 with 2 Studs and Curved Sides
Dark Bluish Gray×2
Bar 1L with Clip Mechanical Claw - Cut Edges and Hole on Side
Trans-Neon Orange×2
Motorcycle Chassis, Long Fairing Mounts and Foot Pegs
Black
Tire 21mm D. x 6mm City Motorcycle
Black×2
Wheel 15mm D. x 6mm City Motorcycle
Light Bluish Gray×2
Slope, Curved 3 x 1
Light Bluish Gray×2
Wedge 4 x 6 x 2/3 Triple Curved
Red
Brick, Modified 1 x 2 with Studs on 2 Sides
Black
Wheel 18mm D. x 14mm with Axle Hole, Fake Bolts and Shallow Spokes
White×4
Bar with Light Cover (Bulb) / Bionicle Barraki Eye
Flat Silver×2
Plate, Modified 1 x 2 with 2 Open O Clips (Horizontal Grip)
Black×3
Brick, Modified 1 x 1 with Open O Clip (Vertical Grip) - Hollow Stud
White×2
Brick, Modified 1 x 1 with Open O Clip (Vertical Grip) - Hollow Stud
Light Bluish Gray×2
Plate, Modified 1 x 2 with Bar Handle on End
White×2
Slope 65 2 x 1 x 2
Red×2
Door 1 x 4 x 6 Barred with Stud Handle
Light Bluish Gray
Minifigure, Utensil Hose Nozzle Elaborate
Black×2
Minifigure, Utensil Hose Nozzle Elaborate
Light Bluish Gray×3
Slope, Curved 2 x 1 x 1 1/3 with Recessed Stud
Light Bluish Gray×2
Plate, Modified 1 x 1 with Open O Clip (Horizontal Grip)
White×2
Plate, Modified 1 x 1 with Open O Clip (Horizontal Grip)
Blue
Plate, Modified 1 x 1 with Open O Clip (Horizontal Grip)
Dark Bluish Gray×2
Hinge Brick 2 x 2 Top Plate
Light Bluish Gray×6
Slope 18 2 x 1 x 2/3 with Grille
Metallic Silver×4
Arch 1 x 4 x 2
Light Bluish Gray
Slope, Curved 1 x 4 x 1 1/3
White
Bar 1 x 4 x 3 Grille with End Protrusions
Dark Bluish Gray
Leg Skeleton
Red
Tile 1 x 3
White×2
Tile 1 x 3
Red×2
Bar 6L with Stop Ring
Black×2
Minifigure, Weapon Lightsaber Hilt Straight
Black×4
Technic, Axle Connector 2L (Smooth with x Hole + Orientation)
Dark Bluish Gray×2
Technic, Gear 12 Tooth Bevel
Red×4
Tile 1 x 6
White×2
Tile 1 x 6
Yellow
Sticker Sheet for Set 75828 - International Version - (27932/6159751)
(Not Applicable)
Bracket 5 x 2 x 2 1/3 with 2 Holes and Bottom Stud Holder
Light Bluish Gray×2
Plate, Round 1 x 1 with Open Stud
Black×6
Plate, Round 1 x 1 with Open Stud
Light Bluish Gray×5
Cone 1 1/6 x 1 1/6 x 2/3 (Fez)
White
Motorcycle Fairing, Vintage
White
Slope 30 1 x 2 x 2/3
White×10
Slope 30 1 x 2 x 2/3
Red×2
Slope 30 1 x 2 x 2/3
Light Bluish Gray×2
Slope 30 1 x 2 x 2/3
Reddish Brown×6
Tile 2 x 4
White
Tile 2 x 4
Red×2
Technic, Axle 4L with Stop
Dark Bluish Gray×4
Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper)
Black
Bar 3L (Bar Arrow)
Black×2
Minifigure, Weapon Whip Bent Flexible
Black
Tire 24 x 14 Shallow Tread, Band Around Center of Tread
Black×4
Plate, Modified 1 x 2 with Clip with Center Cut on Top
Black×2
Windscreen 3 x 6 x 2
Trans-Clear
Bar 1 x 4 x 6 Grille with End Protrusions
Light Bluish Gray
Plate, Modified 1 x 4 with 2 Studs without Groove
Black×2
Arm Skeleton, Bent with Clips at 90 degrees (Vertical Grip)
Red
Bracket 1 x 2 - 2 x 4
Black
Brick and Axle Separator
Orange
Cone 2 x 2 Truncated
Light Bluish Gray
Tile, Round 1 x 1
Black×3
Tile, Round 1 x 1
Trans-Red×3
Tile, Round 1 x 1
Light Bluish Gray×5
Minifigure, Utensil Toolbox
Dark Blue
Plate, Modified 2 x 2 x 2/3 with 2 Studs on Side - Solid Bottom Tube
Black×2
Plate, Modified 2 x 2 x 2/3 with 2 Studs on Side - Solid Bottom Tube
Light Bluish Gray×2
Bracket 1 x 2 - 2 x 2 Inverted
Black
Bracket 1 x 2 - 2 x 2 Inverted
Light Bluish Gray×8
Bracket 1 x 2 - 1 x 2 Inverted
Light Bluish Gray×6
Bracket 1 x 2 - 1 x 2
White×6Common questions about Ecto-1 & 2
How much is LEGO Ecto-1 & 2 (75828-1) worth?
Ecto-1 & 2 sells for an average of $80.91 used and $106.47 new/sealed on BrickLink based on 6 months of completed sales. As a retired set, prices tend to hold steady or appreciate over time, especially for complete sets with original packaging. Actual prices vary with completeness — missing minifigures or key parts will lower the value.
What minifigures come in LEGO set 75828-1?
This set includes 6 minifigures: Abby Yates - Proton Pack ($7.66), Erin Gilbert - Proton Pack ($7.14), Jillian Holtzmann - Proton Pack ($10.97), Patty Tolan - Proton Pack ($8.88), plus 2 more. The minifigures have a combined BrickLink value of $56.05. Each figure is linked above with individual pricing if you're looking to buy or sell specific characters.
Is it worth parting out LEGO Ecto-1 & 2?
The minifigures alone are worth $56.05 (69% of the $80.91 set price), so parting out the figs individually on BrickLink can be profitable. Start with Mayhem at $16.22 — it's the highest-value figure in the set.
Is LEGO Ecto-1 & 2 (75828-1) retired?
Yes, Ecto-1 & 2 was released in 2016 and has been retired from retail for several years. Retired LEGO sets are only available on the secondary market through BrickLink, eBay, or other resale platforms.
How do I check if my Ecto-1 & 2 set is complete?
Use the parts list on this page to check every piece and all 6 minifigures. For the minifigures specifically, you can use the brick'em scanner to identify each figure from a photo and confirm it matches what should be in this set. Missing pieces can be individually sourced on BrickLink.