How much is LEGO Hogwarts Clock Tower (75948-1) worth?

Hogwarts Clock Tower sells for an average of $48.04 used and $74.53 new/sealed on BrickLink based on 6 months of completed sales. As a retired set, prices tend to hold steady or appreciate over time, especially for complete sets with original packaging. Actual prices vary with completeness. Missing minifigures or key parts will lower the value.

What minifigures come in LEGO set 75948-1?

This set includes 8 minifigures: Harry Potter - Black Suit, White Bow Tie, Medium Legs ($1.74), Ron Weasley - Reddish Brown Suit, Shirt with Ruffle ($1.65), Hermione Granger - Pink Dress ($2.26), Fleur Delacour - Dress ($2.96), plus 4 more. The minifigures have a combined BrickLink value of $22.28. Each figure is linked above with individual pricing if you're looking to buy or sell specific characters.

Is it worth parting out LEGO Hogwarts Clock Tower?

The minifigures make up about 46% of the set value ($22.28 out of $48.04). Most of the value is in the complete set package, so selling it whole is likely the better move unless you have buyers lined up for specific figures.

Is LEGO Hogwarts Clock Tower (75948-1) retired?

Yes, Hogwarts Clock Tower was released in 2019 and has been retired from retail for several years. Retired LEGO sets are only available on the secondary market through BrickLink, eBay, or other resale platforms.

How do I check if my Hogwarts Clock Tower set is complete?

Use the parts list on this page to check every piece and all 8 minifigures. For the minifigures specifically, you can use the brick'em scanner to identify each figure from a photo and confirm it matches what should be in this set. Missing pieces can be individually sourced on BrickLink.

Hogwarts Clock Tower

75948-1·Harry Potter·2019·8 minifigs·246 parts

Used Avg

$48.04

New Avg

$74.53

Add to your inventory Scan the minifigs

About Hogwarts Clock Tower

Hogwarts Clock Tower (75948-1) is a LEGO Harry Potter set released in 2019, currently averaging $48.04 used on BrickLink. It comes with 8 minifigures worth a combined $22.28. The set has retired from retail, so secondary market is the only option. The full parts inventory runs 246 pieces.

Parts (246)

Technic, Gear 8 Tooth with Dual Face

×2

Plate 3 x 3

×2

Plate 3 x 3

×2

Minifigure, Utensil Tools, 9 in Bag (Multipack)

Slope, Curved 2 x 1 x 2/3

×4

Plate, Round 1 x 1 with Star and Small Pin Hole

×2

Arch 1 x 3 x 3

×4

Brick 1 x 1 x 3

×5

Tile 2 x 2 Corner

Plate, Modified 1 x 1 with Tooth Vertical

×11

Tile, Round 2 x 2 with Hole

Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)

×8

Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)

×11

Wedge, Plate A-Shape with 2 Rows of 4 Studs

×5

Arch 1 x 8 x 2 Raised

×2

Arch 1 x 8 x 2 Raised

Minifigure, Weapon Sword, Greatsword Pointed with Thick Crossguard

Plate, Modified 1 x 2 with Bar Handles on Ends

×2

Technic, Liftarm Thick 1 x 1 (Spacer)

×2

Tile, Round 2 x 2 with Open Stud

Plate, Round Corner 2 x 6 Double

Brick, Modified 1 x 1 with Scroll with Hollow Stud

×10

Tile, Round 1 x 1 with Bar and Small Pin Hole

×3

Tile, Round 1 x 1 with Bar and Small Pin Hole

×2

Tile, Round 1 x 1 with Bar and Small Pin Hole

×3

Tile, Modified 2 x 3 Pentagonal

Slope 45 1 x 1 x 2/3 Quadruple Convex Pyramid

×7

Plate, Round Half 4 x 8

Arch 1 x 5 x 4 - Continuous Bow

×4

Minifigure, Utensil Goblet

×2

Minifigure, Utensil Goblet

Brick 2 x 2 Corner

×30

Minifigure, Utensil Book Cover

Plate 2 x 2 Corner

×4

Hinge Plate 1 x 4 Swivel (2429 / 2430)

×2

Hinge Plate 1 x 4 Swivel (2429 / 2430)

×2

Tile 1 x 4

×3

Tile 1 x 4

Minifigure, Utensil Book Binding with 2 Studs

Minifigure, Weapon Spear Tip with Fins

×6

Brick 1 x 1 x 5 - Solid Stud

Brick 1 x 2 x 5

×7

Tile, Modified 2 x 2 with Pin

×2

Brick 1 x 16

×3

Tile, Round 1 x 1 Quarter

×7

Tile, Round 1 x 1 Quarter

×3

Plate, Round 2 x 2 with Rounded Bottom (Boat Stud)

×2

Wedge, Plate 2 x 2 Cut Corner

×2

Turntable 2 x 2 Square Base

×6

Technic, Pin with Short Friction Ridges

×4

Bracket 1 x 2 - 1 x 4 with Rounded Corners at the Bottom

×2

Wedge 2 x 1 x 2/3 Right

Wedge 2 x 1 x 2/3 Left

Brick 2 x 4

×5

Brick 2 x 4

Brick 2 x 2

×8

Brick 1 x 2

×5

Window 1 x 2 x 2 2/3 with Rounded Top

×10

Pane for Window 1 x 2 x 2 2/3 Lattice Diamond with Rounded Top

×10

Brick 1 x 1

×42

Brick 2 x 8

Brick 1 x 6

×7

Brick 1 x 4

×21

Brick, Modified 1 x 2 with Log Profile

×15

Brick, Modified 1 x 2 with Log Profile

×2

Brick, Round 2 x 2 x 1 2/3 Dome Top

Rock 1 x 1 Jewel 24 Facet

×2

Plate 2 x 4

×2

Plate 2 x 4

Plate 2 x 3

×2

Plate 2 x 3

Plate 2 x 2

Plate 1 x 2

×2

Plate 1 x 2

×3

Plate 1 x 2

×4

Plate 1 x 2

×7

Brick, Modified 1 x 2 with Open O Clip Thick (Vertical Grip)

Plate 1 x 1

×6

Plate 1 x 1

×2

Plate 6 x 12

Plate 4 x 6

×8

Plate 6 x 10

×2

Plate 6 x 10

Plate 4 x 8

×2

Tile, Modified 2 x 3 with 2 Open O Clips

×2

Bar 4L (Lightsaber Blade / Wand)

×2

Slope 45 2 x 2

×2

Slope 45 2 x 1

×8

Slope 45 2 x 1

×2

Slope 45 2 x 1

×4

Slope 45 2 x 1 Double with Bottom Stud Holder

×2

Wedge, Plate 4 x 4 Cut Corner

Cylinder Quarter 4 x 4 x 6

×2

Brick, Round 1 x 1

×5

Brick, Round 1 x 1

×6

Brick 1 x 2 without Bottom Tube

×2

Tile 2 x 2

×7

Tile 2 x 2

×3

Tile 1 x 2

×2

Tile 1 x 2 with Dark Brown Script 'wingardium leviosa' and Scribbles, Reddish Brown Wand, White Feather Pattern

Technic, Brick 1 x 2 with Holes

×4

Technic, Plate 2 x 6 with 5 Holes

Technic, Plate 1 x 5 with Smooth Ends, 4 Studs and Center Axle Hole

×4

Brick 1 x 2 x 2 with Inside Stud Holder

×23

Plant Plate, Round 1 x 1 with 3 Layered Leaves

×4

Bar 1L with 1 x 1 Round Plate with Hollow Stud

×2

Bar 1L with 1 x 1 Round Plate with Hollow Stud

×2

Brick, Modified 1 x 1 x 1 2/3 with Studs on Side

×2

Technic, Liftarm, Modified Crank / Pin 1 x 3 - Axle Holes

Tile, Modified 2 x 2 with Studs on Edge

Plate, Modified 1 x 3 with 2 Studs (Double Jumper)

×4

Plate, Round 2 x 2 Gear 6 Tooth

×4

Plate, Round 4 x 4 Gear 10 Tooth

Slope 45 1 x 1 x 2/3 Double

×8

Tower Roof 2 x 4 x 4 Half Cone Shaped with Roof Tiles

×2

Brick 1 x 3

×25

Plate 1 x 3

×2

Arch 1 x 4

×12

Slope, Inverted 45 2 x 2 with Flat Bottom Pin

×3

Slope, Inverted 45 2 x 1

×17

Plate 1 x 6

×4

Minifigure, Utensil Wand, 2 on Sprue

×2

Minifigure, Utensil Wand, 2 on Sprue

Slope 65 2 x 2 x 2 with Bottom Tube

Slope 75 2 x 2 x 3 - Solid Studs

×2

Technic, Brick 1 x 4 with Holes

Technic, Axle 6L

Plate 1 x 4

×5

Plate 1 x 4

×2

Plate 1 x 4

×2

Plate 2 x 6

×3

Plate 2 x 6

×2

Hinge Brick 1 x 4 Swivel Top

×4

Hinge Brick 1 x 4 Swivel Base

×4

Plate 2 x 10

Pane for Window 1 x 2 x 2 Lattice Diamond

×11

Arch 1 1/2 x 1 1/2 Corner

×2

Technic, Brick 1 x 6 with Holes

Support 2 x 2 x 2 Stand with Complete Hole

Brick, Round 2 x 2 with Axle Hole

×5

Brick, Round 2 x 2 with Axle Hole

×3

Brick, Round 2 x 2 with Axle Hole

×2

Cone 2 x 2 x 2 - Open Stud

Plate, Round 2 x 2 with Axle Hole

×2

Brick, Modified 1 x 1 with Headlight

×4

Plate, Round 1 x 1

×9

Plate, Round 1 x 1

×17

Plate, Round 1 x 1

×5

Minifigure, Utensil Seat / Chair 2 x 2

Plate, Modified 1 x 1 with Open O Clip Thick (Vertical Grip)

×15

Wedge, Plate 4 x 2 Right

×4

Wedge, Plate 4 x 2 Right

Wedge, Plate 4 x 2 Left

Technic, Axle 1L with Pin with Friction Ridges

×4

Dish 6 x 6 Inverted (Radar) - Solid Studs with Asymmetrical Clock Face with Roman Numerals and Red Triangle Pattern

Slope 75 2 x 1 x 3 - Hollow Stud

×4

Minifigure, Plume Feather Small

×4

Cone 1 x 1 with Top Groove

×5

Tap 1 x 1 without Hole in Nozzle End

×5

Brick, Modified 1 x 1 with Studs on 4 Sides

×3

Container, Treasure Chest Bottom with Slots in Back

Container, Treasure Chest Lid Curved with Thick Hinge

Cone Half 8 x 4 x 6

Brick, Modified 1 x 1 with Studs on 2 Sides, Opposite

×2

Panel 1 x 2 x 1 with Rounded Corners

×3

Bar 1L with Clip Mechanical Claw - Cut Edges and Hole on Side

×2

Slope 30 1 x 1 x 2/3

×13

Slope 30 1 x 1 x 2/3

×10

Wedge, Plate 6 x 3 Right

×4

Brick, Round 2 x 2 Dome Top

Glass for Window 1 x 4 x 6

Plate, Round 4 x 4 with Hole

×7

Slope 18 4 x 1

×2

Plate, Modified 1 x 2 with Bar Handle on End

×2

Plate, Modified 1 x 2 with Bar Handle on End

×4

Slope 65 2 x 1 x 2

×8

Panel 1 x 4 x 3 with Side Supports - Hollow Studs

×2

Window 1 x 2 x 2 Flat Front

×6

Window 1 x 2 x 2 Flat Front

×5

Door, Frame 1 x 4 x 6 with 2 Holes on Top and Bottom

Slope, Curved 2 x 4 x 1 1/3 with 4 Recessed Studs

Wedge, Plate 6 x 6 Cut Corner

×2

Brick 1 x 10

Wave Rounded Straight with Bar End (Castle Dragon Flame / Seaweed / Water)

Tile, Modified 4 x 4 with Studs on Edge

Cylinder Half 2 x 4 x 4

Tile 1 x 3

×6

Tile 1 x 3

×2

Plate, Modified 1 x 2 with Clip on End (Horizontal Grip)

×4

Minifigure, Utensil Telescope

×2

Technic, Axle Connector 2L (Smooth with x Hole + Orientation)

Technic, Brick 1 x 1 with Hole

×8

Technic, Axle 3L with Stud

Tile 1 x 6

×2

Minifigure, Shield Circular / Round Convex Face with Clock with Gold Hands and Roman Numerals Pattern

Sticker Sheet for Set 75948, Sheet 1 - (55639/6267174)

Sticker Sheet for Set 75948, Sheet 2 - (54119/6267107)

Brick, Round Corner 2 x 2 Macaroni with Stud Notch and Reinforced Underside

×2

Plate, Round 1 x 1 with Open Stud

×2

Plate, Round 1 x 1 with Open Stud

×3

Plate, Round 1 x 1 with Open Stud

×7

Cone 1 1/6 x 1 1/6 x 2/3 (Fez)

×2

Slope 30 1 x 2 x 2/3

×2

Slope 30 1 x 2 x 2/3

×4

Tile 2 x 4

×2

Panel 1 x 2 x 3 with Side Supports - Hollow Studs

×5

Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper)

×4

Brick, Modified Facet 2 x 2

×4

Cylinder Half 3 x 6 x 6 with 1 x 2 Cutout

Bar 3L (Bar Arrow)

×3

Arch 1 x 3 x 2 with Curved End

×2

Arch 1 x 3 x 2 with Curved End

×2

Horn, Unicorn / Spiral

×9

Horn, Unicorn / Spiral

×3

Plate, Modified 10 x 10 Octagonal with Hole

×2

Minifigure, Utensil Ski Pole 3L with Handle, Stop Ring and Side Stops

×4

Plate, Modified 1 x 2 with Clip with Center Cut on Top

×2

Plate, Modified 1 x 2 with Clip with Center Cut on Top

×4

Plate, Modified 1 x 4 with 2 Studs without Groove

×3

Slope 45 2 x 1 with 2/3 Cutout

×2

Slope 45 2 x 1 with 2/3 Cutout

×2

Brick, Round 2 x 2 with Axle Hole and Grille / Fluted Profile

Brick and Axle Separator

Cone 2 x 2 Truncated

Tile, Round 1 x 1

×3

Brick, Modified 1 x 2 with Masonry Profile

×3

Brick, Modified 1 x 2 with Masonry Profile

×16

Hogwarts Clock Tower

About Hogwarts Clock Tower

Part-out value

Seller notes

Minifigures in Hogwarts Clock Tower (8)

Parts (246)

Common questions about Hogwarts Clock Tower

How much is LEGO Hogwarts Clock Tower (75948-1) worth?

What minifigures come in LEGO set 75948-1?

Is it worth parting out LEGO Hogwarts Clock Tower?

Is LEGO Hogwarts Clock Tower (75948-1) retired?

How do I check if my Hogwarts Clock Tower set is complete?

More Harry Potter sets

Explore more

Company

Legal