Hogsmeade Village - Collectors' Edition

Part-out value

Minifig value: $160.00 out of $296.99 total (54%). Over half the set's resale value is in the figures. Sellers parting this set out should list the minifigs individually on BrickLink. They'll earn more than bundling everything together.

Seller notes

• Katie Bell - Black Legs ($22.61) is the most valuable minifig in this set. If you're buying this set secondhand, check that this figure is included. It's often the first one pulled by sellers who part out.
• 12 minifigures at $160.00 combined value. That's a solid minifig haul. Consider listing the figures individually on BrickLink where per-figure prices tend to be highest.
• 741 parts makes this a substantial set. If selling used, confirm completeness before listing. Incomplete large sets sell at a steep discount. Use the parts list on this page to check.

Minifigures in Hogsmeade Village - Collectors' Edition (12)

Draco Malfoy - Black Suit, Dark Bluish Gray Sweater

hp532$4.75

Professor Minerva McGonagall - Dark Green Robe, Plain Skirt, Dark Tan Hair

hp540$7.60

Minister of Magic (Cornelius Fudge) - Suit with Dark Blue Tie

hp579$11.58

Mrs. Flume - Medium Lavender Shawl

hp580$18.36

Katie Bell - Black Legs

hp581$22.61

Harry Potter - Black Jacket

hp582$14.56

Madam Rosmerta - Black Skirt

hp583$17.79

Horace Slughorn - Reddish Brown Jacket

hp584$18.64

Ron Weasley - Reddish Brown Jacket, Dark Tan Legs, Dark Blue Beanie

hp585$17.77

Shop Staff

hp586$7.92

Aberforth Dumbledore - Printed Legs

hp587$9.59

Hermione Granger - Dark Bluish Gray Jacket with Scarf

hp588$8.84

Parts (741)

Minifigure, Utensil Trophy Cup Small

Plate, Modified 2 x 2 with Pin Hole - Full Cross Support Underneath

×2

Horse, Movable Legs with Black Eyes, White Pupils, and Single Silver Buckle on Black Bridle Pattern

Support 2 x 2 x 7 Lamp Post, 4 Base Flutes

×3

Bar Holder with Clip

Tile, Modified 2 x 2 Inverted

×4

Brick, Modified 1 x 2 with Studs on 1 Side

×11

Brick, Modified 1 x 2 with Studs on 1 Side

Plate 3 x 3

×7

Plate 3 x 3

×2

Plate 3 x 3

×3

Technic, Axle 1L with Pin 2L with Friction Ridges

×2

Minifigure Footgear Roller Skate

×2

Minifigure, Helmet Ninja Horn Elaborate

×3

Plate, Modified 1 x 2 with Clip on Side (Horizontal Grip)

Plate, Modified 1 x 2 with Clip on Side (Horizontal Grip)

×2

Slope, Curved 2 x 1 x 2/3

×17

Slope, Curved 2 x 1 x 2/3

Cone 1 x 1 Inverted with Bar

×3

Cattle Horn, Long

×2

Brick 1 x 1 x 3

×4

Brick 1 x 1 x 3

×4

Brick 1 x 1 x 3

Brick 1 x 1 x 3

×3

Panel 1 x 4 x 2 with Side Supports - Hollow Studs

Tile 2 x 2 Corner

×2

Tile 2 x 2 Corner

Tile 2 x 2 Corner

Tile, Round 2 x 2 with Bottom Stud Holder

×3

Tile, Round 2 x 2 with Bottom Stud Holder

×9

Tile, Round 2 x 2 with Bottom Stud Holder

Tile, Round 2 x 2 with Bottom Stud Holder with White Clock Face (Time 11:52) with Black Hands and Roman Numerals Pattern

Slope, Curved 2 x 2 x 2/3

×4

Slope, Curved 2 x 2 x 2/3

×8

Slope, Curved 2 x 2 x 2/3

Plate, Modified 1 x 1 with Tooth Vertical

×10

Plate, Modified 1 x 1 with Tooth Vertical

×2

Brick, Round 2 x 2 Dome Bottom

Brick, Round 2 x 2 Dome Bottom

Brick, Round 2 x 2 Dome Bottom

Brick, Round 2 x 2 Dome Bottom

Plate, Modified 2 x 2 with Tow Ball and Hole

Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)

×3

Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)

×4

Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)

Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)

Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)

×2

Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)

×2

Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)

Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)

×19

Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)

Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)

×7

Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)

×5

Tile, Modified 1 x 1 with Open O Clip

×4

Tile, Modified 1 x 1 with Open O Clip

×2

Tile, Modified 1 x 1 with Open O Clip

×14

Arch 1 x 8 x 2 Raised

Arch 1 x 8 x 2 Raised

Tile, Round 1 x 2 Half

×7

Tile, Round 1 x 2 Half

×8

Slope, Curved 2 x 2 Inverted with 2 Recessed Studs

×4

Tile 4 x 4

Plate, Round Half 3 x 6 with 1 x 2 Cutout

×2

Plate, Round Half 3 x 6 with 1 x 2 Cutout

×4

Tile, Round 2 x 2 with Open Stud

×2

Tile, Round 2 x 2 with Open Stud

×5

Tile, Round 2 x 2 with Open Stud

×2

Tile, Round 2 x 2 with Open Stud

×4

Arch 1 x 12 x 3 Raised Arch with 5 Cross Supports

×3

Plate, Round Corner 2 x 6 Double

Brick, Modified 1 x 1 with Scroll with Hollow Stud

×3

Brick, Modified 1 x 1 with Scroll with Hollow Stud

×6

Tile, Round 1 x 1 with Bar and Small Pin Hole

×2

Tile, Round 1 x 1 with Bar and Small Pin Hole

×2

Tile, Round 1 x 1 with Bar and Small Pin Hole

×6

Tile, Round 1 x 1 with Bar and Small Pin Hole

×3

Tile, Round 1 x 1 with Bar and Small Pin Hole

×14

Tile, Modified 2 x 3 Pentagonal

×4

Tile, Modified 2 x 3 Pentagonal

×2

Slope 45 1 x 1 x 2/3 Quadruple Convex Pyramid

×2

Slope 45 1 x 1 x 2/3 Quadruple Convex Pyramid

×12

Slope 45 1 x 1 x 2/3 Quadruple Convex Pyramid

×3

Slope 45 1 x 1 x 2/3 Quadruple Convex Pyramid

×3

Brick, Modified 1 x 2 x 1 2/3 with Studs on Side

×2

Brick, Modified 1 x 2 x 1 2/3 with Studs on Side

Brick, Modified 1 x 2 x 1 2/3 with Studs on Side

Slope, Inverted 45 2 x 1 with 2/3 Cutout

×4

Bar Holder with Handle

×2

Bar Holder with Handle

×3

Bar Holder with Handle

Brick 2 x 2 Corner

×2

Brick 2 x 2 Corner

Brick 2 x 2 Corner

×33

Brick 2 x 2 Corner

×11

Brick 2 x 2 Corner

×3

Panel 1 x 2 x 1 with Rounded Corners and 2 Sides

×2

Horse Hitching / Harness Traces

Technic, Axle Connector Hub with 2 Bar Holders Perpendicular

×2

Plate 2 x 2 Corner

×2

Plate 2 x 2 Corner

Plate 2 x 2 Corner

×2

Plate 2 x 2 Corner

×4

Tile, Round 1 x 1 Half Circle Extended

×29

Tile, Round 1 x 1 Half Circle Extended

×15

Wedge, Plate 2 x 2 Left

×3

Wedge, Plate 2 x 2 Left

Hinge Plate 1 x 4 Swivel (2429 / 2430)

×2

Hinge Plate 1 x 4 Swivel (2429 / 2430)

×2

Hinge Plate 1 x 4 Swivel (2429 / 2430)

×2

Wedge, Plate 2 x 2 Right

×4

Wedge, Plate 2 x 2 Right

×2

Tile 1 x 4

×14

Tile 1 x 4

Tile 1 x 4

×2

Tile 1 x 4

×5

Tile 1 x 4

×2

Tile 1 x 4

×3

Tile 1 x 4

×2

Technic, Axle 3L with Stop

Tile, Modified 1 x 2 with Bar Handle

×2

Plate 2 x 12

Plate 2 x 12

×3

Brick 1 x 1 x 5 - Solid Stud

Brick 1 x 2 x 5

Brick 2 x 6

Brick 1 x 16

Plate, Round 1 x 1 with Flower Edge (5 Petals)

×2

Plate, Round 1 x 1 with Flower Edge (5 Petals)

×3

Tile, Round 1 x 1 Quarter

×22

Tile, Round 1 x 1 Quarter

×3

Tile, Round 1 x 1 Quarter

×5

Bar 1.2L with Top Stud and 4 Bar Arms Up (Palm Tree Top)

Plate, Round 1 x 1 with Bar Handle

×2

Plate, Round 1 x 1 with Bar Handle

×2

Brick, Modified 1 x 4 with Channel

×2

Wedge, Plate 2 x 2 Cut Corner

×8

Wedge, Plate 2 x 2 Cut Corner

×4

Wedge, Plate 2 x 2 Cut Corner

Tile 2 x 3

×52

Tile 2 x 3

Slope, Inverted 33 3 x 2 with Hollow Round Bottom Tube

×2

Technic, Pin with Short Friction Ridges

×5

Slope 45 2 x 1 with Cutout without Stud

×2

Slope 45 2 x 1 with Cutout without Stud

Snake Head with Open Mouth, Fangs and Curved Neck with Bar

×2

Wedge 2 x 1 x 2/3 Right

Wedge 2 x 1 x 2/3 Left

Brick 2 x 4

×4

Brick 2 x 4

×2

Brick 2 x 4

Brick 2 x 3

×2

Brick 2 x 3

Brick 2 x 2

×4

Brick 2 x 2

Brick 2 x 2

Brick 2 x 2

×17

Brick 2 x 2

×3

Brick 2 x 2

Brick 1 x 2

×4

Brick 1 x 2

×2

Brick 1 x 2

×2

Brick 1 x 2

Brick 1 x 2

×7

Brick 1 x 2

×2

Brick 1 x 2

×4

Brick 1 x 2

×6

Brick 1 x 2

×2

Brick 1 x 2

×2

Brick 1 x 1

×9

Brick 1 x 1

×7

Brick 1 x 1

×5

Brick 1 x 1

×66

Brick 1 x 1

×12

Brick 1 x 1

×2

Brick 1 x 1

×7

Brick 1 x 8

×5

Brick 1 x 8

Brick 1 x 6

Brick 1 x 6

×2

Brick 1 x 6

Brick 1 x 6

Brick 1 x 6

Brick 1 x 6

Brick 1 x 6

×7

Brick 1 x 6

×5

Brick 1 x 6

×3

Brick 1 x 6

×12

Brick 1 x 4

Brick 1 x 4

Brick 1 x 4

Brick 1 x 4

Brick 1 x 4

×17

Brick 1 x 4

Brick 1 x 4

Brick 1 x 4

Brick 1 x 4

×4

Brick 1 x 4

×4

Brick, Modified 1 x 2 with Log Profile

×2

Brick, Modified 1 x 2 with Log Profile

×90

Brick, Modified 1 x 2 with Log Profile

×2

Brick, Modified 1 x 2 with Log Profile

×18

Brick, Modified 1 x 4 with Log Profile

×2

Brick, Modified 1 x 4 with Log Profile

×3

Brick 2 x 2 x 3

×5

Brick, Round 2 x 2 x 1 2/3 Dome Top

×2

Plate, Modified 2 x 3 Inverted with 4 Studs and Bar Handle on Bottom (Rocker Plate)

×2

Plate, Modified 2 x 3 Inverted with 4 Studs and Bar Handle on Bottom (Rocker Plate)

×2

Plate 2 x 4

×3

Plate 2 x 4

×3

Plate 2 x 4

×2

Plate 2 x 4

Plate 2 x 4

×3

Plate 2 x 4

Plate 2 x 4

Plate 2 x 4

×3

Plate 2 x 3

×4

Plate 2 x 3

Plate 2 x 3

×3

Plate 2 x 3

×24

Plate 2 x 3

×2

Plate 2 x 3

×10

Plate 2 x 2

×4

Plate 2 x 2

Plate 2 x 2

×5

Plate 2 x 2

×2

Plate 2 x 2

Plate 2 x 2

Plate 2 x 2

×8

Plate 2 x 2

×7

Plate 2 x 2

Plate 2 x 2

×7

Plate 1 x 2

×27

Plate 1 x 2

×2

Plate 1 x 2

×4

Plate 1 x 2

×9

Plate 1 x 2

×2

Plate 1 x 2

Plate 1 x 2

×53

Plate 1 x 2

×6

Plate 1 x 2

×10

Plate 1 x 2

×3

Plate 1 x 2

×4

Plate 1 x 1

×7

Plate 1 x 1

×3

Plate 1 x 1

×5

Plate 1 x 1

×5

Plate 1 x 1

×2

Plate 1 x 1

×4

Plate 1 x 1

×7

Plate 1 x 1

×2

Plate 1 x 1

×27

Plate 1 x 1

×2

Plate 1 x 1

×3

Plate 1 x 1

×7

Plate 4 x 12

Plate 4 x 10

×2

Plate 4 x 4

Plate 4 x 4

Plate 4 x 6

Plate 6 x 10

Plate 6 x 10

×6

Plate 2 x 8

Plate 2 x 8

Plate 2 x 8

×2

Plate 4 x 8

Plate 4 x 8

×2

Plate 4 x 8

×6

Plate 4 x 8

Tile, Modified 2 x 3 with 2 Open O Clips

×3

Plate, Round Corner 3 x 3

×4

Plate 6 x 8

×2

Plate 6 x 8

Plate 6 x 8

Plate 6 x 8

×3

Slope 18 4 x 2

Bar 4L (Lightsaber Blade / Wand)

Slope 45 2 x 2

×6

Slope 45 2 x 1

×6

Slope 45 2 x 1

×4

Slope 45 2 x 1

×2

Slope 45 2 x 4 Double

×3

Slope 45 2 x 2 Double

×13

Slope 45 2 x 1 Double with Bottom Stud Holder

×11

Slope 45 2 x 2 Double Convex Corner

×2

Slope 45 2 x 2 Double Concave

×2

Slope 45 2 x 1 Double / Inverted with Bottom Stud Holder

×8

Brick, Round 1 x 1

Brick, Round 1 x 1

Brick, Round 1 x 1

×9

Brick, Round 1 x 1

×3

Brick, Round 1 x 1

×3

Brick, Round 1 x 1

×6

Brick, Round 1 x 1

×5

Brick, Round 1 x 1

×31

Brick, Round 1 x 1

×2

Brick, Round 1 x 1

×5

Brick, Round 1 x 1

×2

Brick, Round 1 x 1

×3

Brick, Round 1 x 1

×2

Tile 2 x 2

×16

Tile 2 x 2

Tile 2 x 2

×2

Tile 2 x 2 with Newspaper with 'ESCAPE from AZKABAN!', 'It's Sirius!', 'Black is not back!' and Sirius Black Minifigure on Wanted Poster Pattern

Tile 2 x 2 with Black 'DUMBLEDORE'S ARMY' 'Hermione Granger' 'Ron Weasley' 'Harry Potter' 'George Weasley' 'Fred Weasley' with Dark Tan Dirt Marks Pattern

Tile 1 x 2

×6

Tile 1 x 2

×9

Tile 1 x 2

×3

Tile 1 x 2

×2

Tile 1 x 2

×4

Tile 1 x 2

×25

Tile 1 x 2

×2

Tile 1 x 2

Tile 1 x 2 with Envelope with Red Wax Seal and Dark Tan Highlights Pattern

×3

Tile 1 x 2 with Dark Azure Lines and Red Rectangle Pattern (Mail Envelope with Stamp and Return Address)

×2

Tile 1 x 2 with Red and Blue Lines, Dark Blue Square and Scribbles Pattern (Air Mail Envelope / Postcard with Stamp)

×2

Tile 1 x 2 with Red 'JUNK MAIL' and Black 'SELECTED WINNER!' Pattern (Mail Envelope with Stamp and Address)

×2

Tile 1 x 1

×5

Tile 1 x 1

×9

Tile 1 x 1

×5

Tile 1 x 1

×3

Tile 1 x 1

×3

Tile 1 x 1 with Black Keyhole and 4 Dots on Silver Background Pattern

×2

Plate, Modified 1 x 2 with Door Rail

×2

Plate, Modified 1 x 2 with Door Rail

×3

Plate, Modified 1 x 2 with Door Rail

×7

Plate, Modified 1 x 2 with Door Rail

×2

Plate, Modified 1 x 2 with Door Rail

×16

Plate, Modified 1 x 2 with Door Rail

×20

Technic, Brick 1 x 2 with Axle Hole

Brick 1 x 2 x 2 with Inside Stud Holder

×2

Brick 1 x 2 x 2 with Inside Stud Holder

Brick 1 x 2 x 2 with Inside Stud Holder

×5

Brick 1 x 2 x 2 with Inside Stud Holder

×3

Brick 1 x 2 x 2 with Inside Stud Holder

×3

Bar 1L with 1 x 1 Round Plate with Hollow Stud

×4

Bar 1L with 1 x 1 Round Plate with Hollow Stud

×4

Bar 1L with 1 x 1 Round Plate with Hollow Stud

×2

Bar 1L with 1 x 1 Round Plate with Hollow Stud

×2

Bar 1L with 1 x 1 Round Plate with Hollow Stud

×5

Brick, Modified 1 x 1 x 1 2/3 with Studs on Side

×4

Plant Stem with Bar (Carrot Top / Twig)

×2

Cone 1 1/2 x 1 1/2 x 2/3 Truncated

Tile, Modified 2 x 2 with Studs on Edge

×9

Tile, Modified 2 x 2 with Studs on Edge

×4

Tile, Modified 2 x 2 with Studs on Edge

×2

Tile, Modified 2 x 2 with Studs on Edge

×3

Tile, Modified 2 x 2 with Studs on Edge

×4

Tile, Modified 2 x 2 with Studs on Edge

×4

Tile, Modified 2 x 2 with Studs on Edge

×3

Plate, Modified 1 x 3 with 2 Studs (Double Jumper)

Minifigure, Utensil Bowl

×2

Minifigure, Utensil Bowl

×8

Plate 6 x 14

Plate 1 x 8

×2

Plate 1 x 8

×2

Plate 1 x 8

×10

Plate 1 x 8

×4

Plate, Round 1 x 2 with Open Studs

×10

Plate, Round 1 x 2 with Open Studs

×3

Plate, Round 1 x 2 with Open Studs

Plate, Round 1 x 2 with Open Studs

×12

Plate, Round 1 x 2 with Open Studs

Tile, Modified 2 x 2 Triangular

×2

Tile, Modified 2 x 2 Triangular

×2

Tile, Modified 2 x 2 Triangular

×2

Brick 1 x 3

×6

Brick 1 x 3

×7

Brick 1 x 3

×13

Brick 1 x 3

×3

Brick 1 x 3

×33

Plate 1 x 3

Plate 1 x 3

×2

Plate 1 x 3

Plate 1 x 3

×4

Plate 1 x 3

×3

Plate 1 x 3

Minifigure, Head with Black Standard Skull Pattern

×4

Minifigure, Head without Face with Gold Bands with Solid Black Dots, Silver Swirls, Red and Light Aqua Smoke on Opposite Sides Pattern (HP Remembrall)

Fence 1 x 4 x 1 Lattice

Arch 1 x 4

Arch 1 x 4

Slope, Inverted 45 2 x 2 with Flat Bottom Pin

Slope, Inverted 45 2 x 2 with Flat Bottom Pin

×3

Slope, Inverted 45 2 x 1

×4

Plate 1 x 6

Plate 1 x 6

×8

Plate 1 x 6

×4

Plate 1 x 6

×5

Plate 1 x 6

×15

Plate 1 x 6

Plate 1 x 6

Plate 1 x 6

×3

Plate 1 x 6

×3

Minifigure, Utensil Wand, 2 on Sprue

×3

Minifigure, Utensil Wand, 2 on Sprue

Minifigure, Utensil Wand, 2 on Sprue

×2

Minifigure, Utensil Wand, 2 on Sprue

Minifigure, Utensil Wand, 2 on Sprue

×2

Slope 65 2 x 2 x 2 with Bottom Tube

×17

Bracket 1 x 1 - 1 x 1 Inverted

Bracket 1 x 1 - 1 x 1

×2

Slope 75 2 x 2 x 3 - Solid Studs

×2

Slope 75 2 x 2 x 2 Quadruple Convex

×3

Technic, Brick 1 x 2 with Hole

×3

Technic, Brick 1 x 4 with Holes

Technic, Brick 1 x 4 with Holes

×5

Technic, Axle 6L

×2

Plate 1 x 4

×3

Plate 1 x 4

Plate 1 x 4

Plate 1 x 4

×2

Plate 1 x 4

×4

Plate 1 x 4

Plate 1 x 4

×5

Plate 1 x 4

×2

Plate 1 x 4

×3

Plate 1 x 4

×12

Slope, Curved 1 x 2 with Bottom Stud Holder

×27

Slope, Curved 1 x 2 with Bottom Stud Holder

×6

Slope, Curved 1 x 2 with Bottom Stud Holder

×5

Slope, Curved 1 x 2 with Bottom Stud Holder

Slope, Inverted 33 3 x 2 with Flat Bottom Pin and Connections between Studs

×2

Minifigure, Utensil Candle

×2

Minifigure, Utensil Candle

×10

Minifigure, Utensil Candle

×2

Minifigure, Utensil Lantern

Plate 2 x 6

×2

Plate 2 x 6

Plate 2 x 6

Plate 2 x 6

×2

Plate 2 x 6

Plate 2 x 6

Minifigure, Utensil Teacup

×3

Minifigure, Utensil Teacup

×2

Hinge Brick 1 x 4 Swivel Top

Hinge Brick 1 x 4 Swivel Base

Cone Half 4 x 2 x 3

Plate 2 x 10

×3

Plate 2 x 10

×4

Pane for Window 1 x 2 x 2 Lattice Diamond

×30

Baseplate 16 x 32

×3

Minifigure, Utensil Tea Saucer with Hollow Stud

×3

Minifigure, Utensil Tea Saucer with Hollow Stud

×3

Minifigure, Utensil Cup

Minifigure, Utensil Cup

×2

Hinge Brick 1 x 2 Base

×14

Hinge Brick 1 x 2 Base

×8

Hinge Brick 1 x 2 Top Plate

×7

Support 2 x 2 x 2 Stand with Complete Hole

Brick, Round 2 x 2 with Axle Hole

×4

Cone 2 x 2 x 2 - Open Stud

Plate 6 x 6

Plate, Round 2 x 2 with Axle Hole

×11

Plate, Round 2 x 2 with Axle Hole

×3

Plate, Round 2 x 2 with Axle Hole

×2

Dinosaur Tail End Section / Horn

×2

Brick, Modified 1 x 1 with Headlight

×2

Brick, Modified 1 x 1 with Headlight

×2

Plate, Round 1 x 1

×5

Plate, Round 1 x 1

×10

Plate, Round 1 x 1

×3

Plate, Round 1 x 1

×5

Plate, Round 1 x 1

×6

Plate, Round 1 x 1

×28

Plate, Round 1 x 1

×3

Plate, Round 1 x 1

×3

Plate, Round 1 x 1

×2

Minifigure, Utensil Seat / Chair 2 x 2

×4

Plate, Modified 1 x 1 with Light Attachment - Thick Ring

Plate 8 x 8

Tile 1 x 8

Tile 1 x 8

×2

Tile 1 x 8

×2

Plate, Modified 1 x 4 with 2 Studs with Groove

Plate, Modified 1 x 4 with 2 Studs with Groove

Plate 2 x 16

×6

Plate 2 x 16

Slope, Inverted 33 3 x 1

×2

Plate, Modified 2 x 2 x 2/3 with 2 Studs on Side - Hollow Bottom Tube

×2

Plate, Modified 2 x 2 x 2/3 with 2 Studs on Side - Hollow Bottom Tube

Plate, Modified 2 x 2 x 2/3 with 2 Studs on Side - Hollow Bottom Tube

×3

Container, Box 2 x 2 x 2

Container, Box 2 x 2 x 2 Door with Slot

Wedge, Plate 3 x 2 Right

×18

Wedge, Plate 3 x 2 Right

×4

Wedge, Plate 3 x 2 Left

×21

Wedge, Plate 3 x 2 Left

×6

Support 1 x 1 x 6 Solid Pillar

×4

Support 1 x 1 x 6 Solid Pillar

×4

Dish 3 x 3 Inverted (Radar)

Slope 75 2 x 1 x 3 - Hollow Stud

×8

Plate 1 x 10

×6

Plate 1 x 10

×5

Minifigure, Plume Feather Small

×11

Plate, Modified 1 x 8 with Door Rail

×2

Plate, Modified 1 x 8 with Door Rail

×4

Plate, Modified 1 x 8 with Door Rail

Minifigure, Utensil Tool Mallet / Hammer

Minifigure, Utensil Frying Pan

×2

Cone 1 x 1 with Top Groove

Cone 1 x 1 with Top Groove

×2

Cone 1 x 1 with Top Groove

×10

Tap 1 x 1 without Hole in Nozzle End

×4

Plate, Modified 1 x 2 with Bar Arm Up (Horizontal Arm 5mm)

×2

Pneumatic T Piece Second Version (T Bar with Ball in Center)

×3

Pneumatic T Piece Second Version (T Bar with Ball in Center)

×3

Wedge, Plate 12 x 3 Right

Wedge, Plate 12 x 3 Right

Dish 2 x 2 Inverted (Radar)

×4

Slope, Curved 2 x 2 x 2/3 with 2 Studs and Curved Sides

×2

Brick, Modified 1 x 1 with Studs on 2 Sides, Opposite

Brick, Modified 1 x 1 with Studs on 2 Sides, Opposite

Brick, Modified 1 x 1 with Studs on 2 Sides, Opposite

Panel 1 x 2 x 1 with Rounded Corners

×4

Panel 1 x 2 x 1 with Rounded Corners

×2

Bar 1L with Clip Mechanical Claw - Cut Edges and Hole on Side

×3

Bar 1L with Clip Mechanical Claw - Cut Edges and Hole on Side

Slope, Curved 1 x 1 x 2/3 Double

×32

Slope, Curved 1 x 1 x 2/3 Double

Slope, Curved 1 x 1 x 2/3 Double

×2

Slope, Curved 1 x 1 x 2/3 Double

×4

Slope, Curved 1 x 1 x 2/3 Double

×10

Slope, Curved 1 x 1 x 2/3 Double

×6

Plate, Modified 1 x 1 with Tooth Horizontal

×2

Plate, Modified 1 x 1 with Tooth Horizontal

×2

Plate, Modified 2 x 2 with Bar on Bottom

×4

Tile, Modified 1 x 2 Wedge Left

Tile, Modified 1 x 2 Wedge Left

Tile, Modified 1 x 2 Wedge Right

Tile, Modified 1 x 2 Wedge Right

Slope, Curved 3 x 1

×2

Pumpkin / Gourd

×2

Brick, Round Corner 3 x 3 Macaroni with 2 Studs

×2

Brick, Round Corner 3 x 3 Macaroni with 2 Studs

×4

Plate, Round 1 x 1 with Clip on Bottom

×10

Plate, Round 1 x 1 with Clip on Bottom

×5

Plate, Round 1 x 1 with Horizontal Swirl / Twist

×4

Barb / Claw / Horn / Tooth - Small

×3

Slope 30 1 x 1 x 2/3

×3

Slope 30 1 x 1 x 2/3

×3

Slope 30 1 x 1 x 2/3

×3

Slope 30 1 x 1 x 2/3

×9

Door 1 x 4 x 6 with Window and Stud Handle

×2

Tile, Round 2 x 2 Half Circle Extended

×16

Hinge Cylinder 1 x 2 Locking with 2 Fingers and Axle Hole on Ends without Slots

×2

Technic, Axle Connector Hub with 3 Axles

Hinge Cylinder 1 x 3 Locking with 1 Finger and Pin with Squared Hole and Friction Ridges on Ends

×2

Slope, Curved 2 x 1 with Recessed Stud

×2

Slope, Curved 2 x 1 with Recessed Stud

×2

Panel 1 x 6 x 5

Panel 1 x 6 x 5

×6

Plate, Modified 1 x 2 with 2 Open O Clips (Horizontal Grip)

×4

Plate, Round 4 x 4 with Hole

Plate, Round 4 x 4 with Hole

Brick, Modified 1 x 1 with Open O Clip (Vertical Grip) - Hollow Stud

Plate, Modified 1 x 2 with Bar Handle on End

×2

Plate, Modified 1 x 2 with Bar Handle on End

×8

Plate 1 x 12

Slope 65 2 x 1 x 2

×18

Slope 65 2 x 1 x 2

×8

Panel 1 x 4 x 3 with Side Supports - Hollow Studs

×2

Window 1 x 2 x 2 Flat Front

×10

Window 1 x 2 x 2 Flat Front

Window 1 x 2 x 2 Flat Front

×2

Window 1 x 2 x 2 Flat Front

×2

Window 1 x 2 x 2 Flat Front

×3

Window 1 x 2 x 2 Flat Front

×3

Window 1 x 2 x 2 Flat Front

×35

Window 1 x 2 x 3 Flat Front

×4

Window 1 x 2 x 3 Flat Front

×2

Window 1 x 2 x 3 Flat Front

×2

Window 1 x 2 x 3 Flat Front

×2

Window 1 x 4 x 3 - No Shutter Tabs

Window 1 x 4 x 3 - No Shutter Tabs

Door, Frame 1 x 4 x 6 with 2 Holes on Top and Bottom

Door, Frame 1 x 4 x 6 with 2 Holes on Top and Bottom

×2

Door, Frame 1 x 4 x 6 with 2 Holes on Top and Bottom

×2

Door, Frame 1 x 4 x 6 with 2 Holes on Top and Bottom

Door, Frame 1 x 4 x 6 with 2 Holes on Top and Bottom

Door, Frame 1 x 4 x 6 with 2 Holes on Top and Bottom

Glass for Window 1 x 2 x 2 Flat Front

×54

Glass for Window 1 x 2 x 3 Flat Front

×7

Glass for Window 1 x 4 x 3 - Opening

Pane for Window 1 x 2 x 3 Lattice with Thick Corner Tabs

×2

Door 1 x 4 x 6 Barred with Stud Handle

Door 1 x 4 x 6 with 4 Panes and Stud Handle

Door 1 x 4 x 6 with 4 Panes and Stud Handle

Door 1 x 4 x 6 with 4 Panes and Stud Handle

Door 1 x 4 x 6 with 4 Panes and Stud Handle

Door 1 x 4 x 6 with 4 Panes and Stud Handle

Brick 1 x 12

Hinge Brick 2 x 2 Top Plate

×12

Hinge Brick 2 x 2 Top Plate

×3

Slope, Curved 3 x 2 with 4 Studs

Ice Cream Scoops

Ice Cream Scoops

Plate, Modified 2 x 2 with Tow Ball Socket, Short, Flattened with Holes and Axle Hole in Center

Tile 1 x 3

×18

Tile 1 x 3

Tile 1 x 3

×2

Tile 1 x 3

×5

Plate, Modified 1 x 2 with Clip on End (Horizontal Grip)

×2

Bar 6L with Stop Ring

×3

Minifigure, Utensil Telescope

×11

Minifigure, Plume Feather Triple Compact / Flame / Water with Small Pin

×2

Plate, Modified 4 x 4 with 2 x 2 Open Center

×7

Cattle Horn, Short

×3

Wedge, Plate 4 x 2 Right, Pointed

×3

Wedge, Plate 4 x 2 Left, Pointed

×3

Plate, Modified 2 x 4 with 2 Studs (Double Jumper)

×4

Plate, Modified 2 x 4 with 2 Studs (Double Jumper)

×5

Plate, Modified 2 x 4 with 2 Studs (Double Jumper)

×3

Bar 1L with Angled Hollow Stud

×2

Road Sign 2 x 2 Triangle with Open O Clip

×3

Road Sign 2 x 2 Triangle with Open O Clip

Tile 1 x 6

×2

Tile 1 x 6

Tile 1 x 6

×4

Minifigure, Weapon Hilt Smooth Extended

×4

Wedge 2 x 2 x 2/3 Pointed

×7

Tile, Round 3 x 3

Vehicle, Steering Wheel with 2 x 2 Center and Axle Hole

×2

Cylinder Half 1 x 2 x 1

Cylinder Half 1 x 2 x 1

Cylinder Half 1 x 2 x 1

×2

Minifigure, Utensil Stein / Cup with Molded Trans-Orange Drink Pattern

×2

Brick, Round 1 x 1 x 2/3 Dome Top

×3

Tile 2 x 6

×2

Arch 1 x 3 Inverted

×2

Bar 6L with Stop Rings, Bent

×3

Slope, Curved 1 x 1

×2

Window 3 x 3 x 2 Round Corner

×8

Window 3 x 3 x 2 Round Corner

×4

Sticker Sheet for Set 76457, Sheet 1 - (10114402/6560604)

Sticker Sheet for Set 76457, Sheet 2, Mirrored - (10114403/6560611)

Sticker Sheet for Set 76457, Sheet 3 - (10114404/6560612)

Slope, Curved 3 x 3 Corner Round

×4

Slope, Inverted 45 2 x 2 with Hollow Round Bottom Tube

×4

Slope, Inverted 45 2 x 2 with Hollow Round Bottom Tube

×8

Brick, Round 1 x 2 with Hollow Studs and Open Center with Bars

×2

Plate, Round 1 x 3 with Open Studs

×3

Plate, Round 1 x 3 with Open Studs

×3

Plate, Round 1 x 3 with Open Studs

×2

Bar 2L with Stop Ring

×3

Bar 2L with Stop Ring

×3

Plate 1 x 5

×3

Plate 1 x 5

×11

Wedge, Plate 6 x 2 Left

×2

Wedge, Plate 6 x 2 Left

×2

Wedge, Plate 6 x 2 Right

×3

Wedge, Plate 6 x 2 Right

Wedge, Plate 6 x 2 Right

Arch 1 x 2 Inverted

×2

Arch 1 x 2 Inverted

×2

Slope, Curved 1 x 4 x 2/3 Double

×3

Slope, Curved 2 x 2 x 2/3 Double Corner

×2

Minifigure, Utensil Spoon - Handle with Flat End

×4

Plate, Round 1 x 1 with Open Stud

×2

Plate, Round 1 x 1 with Open Stud

×2

Plate, Round 1 x 1 with Open Stud

×13

Slope 30 1 x 2 x 2/3

×11

Slope 30 1 x 2 x 2/3

×12

Slope 30 1 x 2 x 2/3

×21

Slope 30 1 x 2 x 2/3

×16

Slope 30 1 x 2 x 2/3 with Manual Typewriter Vintage Keyboard Pattern

Brick, Modified 1 x 2 with Stud on Side with Bottom Stud Holder

×12

Brick, Modified 1 x 2 with Stud on Side with Bottom Stud Holder

×3

Brick, Modified 1 x 2 with Stud on Side with Bottom Stud Holder

×10

Brick, Modified 1 x 1 x 2/3 with Open Stud

×3

Brick, Modified 1 x 1 x 2/3 with Open Stud

×2

Brick, Modified 1 x 1 x 2/3 with Open Stud

×5

Brick, Modified 1 x 1 x 2/3 with Open Stud

×6

Tile 2 x 4

×4

Tile 2 x 4

Tile 2 x 4

Tile 2 x 4

Tile 2 x 4

×3

Brick, Modified 1 x 1 with Stud on Side

Panel 1 x 2 x 2 with Side Supports - Hollow Studs

Panel 1 x 2 x 2 with Side Supports - Hollow Studs

×14

Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper)

×10

Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper)

Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper)

×2

Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper)

Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper)

Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper)

×7

Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper)

Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper)

×8

Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper)

×3

Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper)

×5

Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper)

×4

Brick, Modified Facet 2 x 2

×4

Bar 3L (Bar Arrow)

×3

Arch 1 x 3 x 2 with Curved End

×2

Technic, Pin 1/2 with Friction Ridges

×2

Window 1 x 2 x 2 Castle

Window 1 x 2 x 2 Castle

Window 1 x 2 x 2 Castle

×2

Minifigure, Utensil Statuette / Trophy

×2

Minifigure, Utensil Broom Bristles with Stud Holder

×3

Support 2 x 2 x 13 with 5 Pin Holes

×2

Plate 2 x 14

×4

Owl, Angular Features with Black Beak, Bright Light Orange Eyes, and Dark Bluish Gray Rippled Chest Feathers Pattern (HP Hedwig)

Bar 1L with Top Stud and 2 Side Studs (Connector Perpendicular)

Slope 45 2 x 1 with 2/3 Cutout

×2

Slope, Curved 4 x 1 x 2/3 Double

×7

Arm Skeleton, Bent with Clips (Horizontal Grip)

×2

Minifigure, Utensil Bottle

Minifigure, Utensil Bottle

×2

Brick and Axle Separator

Tile, Round 1 x 1

×7

Tile, Round 1 x 1

×2

Tile, Round 1 x 1

×2

Tile, Round 1 x 1

×3

Tile, Round 1 x 1

×2

Tile, Round 1 x 1

×4

Tile, Round 1 x 1

×2

Tile, Round 1 x 1

×2

Tile, Round 1 x 1

×19

Tile, Round 1 x 1

×2

Tile, Round 1 x 1 with Red Spiral Thin Pattern

×2

Tile, Round 1 x 1 with Cookie with Tan Frosting and Reddish Brown Chocolate Sprinkles Pattern

×4

Tile, Round 1 x 1 with Dark Blue Compass Rose and Red Needle Pattern

×2

Tile, Round 1 x 1 with Black Gauge with Red Pointer and White, Medium Azure, and Red Tick Marks Pattern

×2

Tile, Round 1 x 1 with Gold Pentagon and Shapes Pattern (HP Chocolate Frog Card)

×2

Tile, Round 1 x 1 with Dark Orange Dragon and Dotted Circle on Gold Background Pattern (HP Unum Galleon)

×6

Brick, Modified 1 x 2 with Masonry Profile

×6

Brick, Modified 1 x 2 with Masonry Profile

×5

Brick, Modified 1 x 2 with Masonry Profile

×41

Minifigure, Utensil Toy Winder Key

×2

Pneumatic Hose Connector with Axle Connector

×3

Bracket 1 x 2 - 2 x 2 Inverted

×2

Minifigure, Utensil Ingot 1 x 2

×2

Minifigure, Utensil Ingot 1 x 2

×7

Minifigure, Utensil Ingot 1 x 2

Minifigure, Utensil Ingot 1 x 2

Bracket 1 x 2 - 1 x 2 Inverted

×3

Bracket 1 x 2 - 1 x 2

×8

Bracket 1 x 2 - 1 x 2

×4

Frog

Frog

×2

Common questions about Hogsmeade Village - Collectors' Edition

More Harry Potter sets

Hogwarts Castle {3rd edition}

5378-1

$298.66

Hogwarts Castle

71043-1

$268.05

Gringotts Wizarding Bank - Collectors' Edition

76417-1

$342.26

Sorcerer's Stone Kit

K4706-1

$240.82

Hogwarts Icons - Collectors' Edition

76391-1

$224.57

Diagon Alley

75978-1

$387.93

Motorized Hogwarts Express

10132-1

$394.53

The Burrow - Collectors' Edition

76437-1

$197.37

Explore more