brick'em
Retro Food Truck

Retro Food Truck

40681-1·Ideas·2024·2 minifigs·116 parts

Used Avg
$33.58
New Avg
$35.46
Add to your inventoryScan the minifigs

About Retro Food Truck

Retro Food Truck (40681-1) is a LEGO Ideas set released in 2024, currently averaging $33.58 used on BrickLink. It comes with 2 minifigures worth a combined $3.11. It may still be available at retail from LEGO or authorized retailers. The full parts inventory runs 116 pieces.

Part-out value

The minifigures make up only 9% of this set's value ($3.11 out of $33.58). The bulk of the value is in the parts or the set being complete. Sell it as a complete set if possible.

Minifigures in Retro Food Truck (2)

Retro Food Truck Vendor - Male, White Sweater with Red Horizontal Stripes, Blue Legs, Red Cap, Sweat Drops
Retro Food Truck Vendor - Male, White Sweater with Red Horizontal Stripes, Blue Legs, Red Cap, Sweat Drops
twn493$1.58
Retro Food Truck Customer
Retro Food Truck Customer
twn494$1.53

Parts (116)

Minifigure, Weapon Bladed Claw, Spread
Minifigure, Weapon Bladed Claw, Spread
Pearl Gold×3
Wheel 14mm D. x 9.9mm with Center Groove, Fake Bolts and 6 Double Spokes
Wheel 14mm D. x 9.9mm with Center Groove, Fake Bolts and 6 Double Spokes
Light Bluish Gray×4
Tire 21 x 9.9
Tire 21 x 9.9
Black×4
Brick, Modified 1 x 2 with Studs on 1 Side
Brick, Modified 1 x 2 with Studs on 1 Side
White
Brick, Modified 1 x 2 with Studs on 1 Side
Brick, Modified 1 x 2 with Studs on 1 Side
Bright Light Blue
Bracket 5 x 2 x 1 1/3 with 2 Holes and Bottom Tube
Bracket 5 x 2 x 1 1/3 with 2 Holes and Bottom Tube
Black×2
Plate, Modified 1 x 2 with Clip on Side (Horizontal Grip)
Plate, Modified 1 x 2 with Clip on Side (Horizontal Grip)
White×2
Slope, Curved 2 x 1 x 2/3
Slope, Curved 2 x 1 x 2/3
White×2
Slope, Curved 2 x 1 x 2/3
Slope, Curved 2 x 1 x 2/3
Bright Light Blue×2
Panel 1 x 4 x 2 with Side Supports - Hollow Studs
Panel 1 x 4 x 2 with Side Supports - Hollow Studs
White
Tile, Round 1 x 1 with Bar and Small Pin Hole
Tile, Round 1 x 1 with Bar and Small Pin Hole
White×6
Tile, Modified 1 x 2 Grille with Bottom Groove
Tile, Modified 1 x 2 Grille with Bottom Groove
White×2
Tile, Modified 1 x 2 Grille with Bottom Groove
Tile, Modified 1 x 2 Grille with Bottom Groove
Dark Bluish Gray×6
Plate 2 x 2 Corner
Plate 2 x 2 Corner
White×2
Tile, Round 1 x 1 Half Circle Extended
Tile, Round 1 x 1 Half Circle Extended
White×6
Tile, Round 1 x 1 Half Circle Extended
Tile, Round 1 x 1 Half Circle Extended
Red×9
Tile 1 x 4
Tile 1 x 4
White×2
Tile, Round 1 x 1 Quarter
Tile, Round 1 x 1 Quarter
Red×3
Hot Dog / Sausage Bun
Hot Dog / Sausage Bun
Tan×2
Plate, Round 2 x 2 with Rounded Bottom (Boat Stud)
Plate, Round 2 x 2 with Rounded Bottom (Boat Stud)
Light Bluish Gray×4
Tile 2 x 3
Tile 2 x 3
Red×2
Technic, Pin with Short Friction Ridges
Technic, Pin with Short Friction Ridges
Black×2
Brick 1 x 2
Brick 1 x 2
White×2
Brick 1 x 1
Brick 1 x 1
White
Brick 1 x 1
Brick 1 x 1
Bright Light Blue×3
Brick 1 x 4
Brick 1 x 4
Bright Light Blue×4
Plate 2 x 4
Plate 2 x 4
Tan×2
Plate 2 x 4
Plate 2 x 4
Black
Plate 2 x 4
Plate 2 x 4
Light Bluish Gray×3
Plate 2 x 4
Plate 2 x 4
Bright Light Blue×3
Plate 2 x 3
Plate 2 x 3
Bright Light Blue×4
Plate 2 x 2
Plate 2 x 2
Black×6
Plate 1 x 2
Plate 1 x 2
White×2
Plate 1 x 2
Plate 1 x 2
Yellow×3
Plate 1 x 2
Plate 1 x 2
Red×4
Plate 1 x 2
Plate 1 x 2
Black×6
Plate 1 x 2
Plate 1 x 2
Light Bluish Gray×3
Plate 1 x 2
Plate 1 x 2
Bright Light Blue×9
Plate 1 x 1
Plate 1 x 1
White×3
Plate 1 x 1
Plate 1 x 1
Red×3
Plate 1 x 1
Plate 1 x 1
Bright Light Blue×8
Plate 4 x 6
Plate 4 x 6
Light Bluish Gray
Bar   4L (Lightsaber Blade / Wand)
Bar 4L (Lightsaber Blade / Wand)
Black
Brick, Round  1 x 1
Brick, Round 1 x 1
Trans-Green
Tile 2 x 2
Tile 2 x 2
White×3
Tile 1 x 2
Tile 1 x 2
White
Tile 1 x 2
Tile 1 x 2
Yellow
Tile 1 x 2
Tile 1 x 2
Bright Light Blue
Plate, Modified 1 x 2 with Pin Hole on End
Plate, Modified 1 x 2 with Pin Hole on End
Red×2
Plate, Modified 1 x 2 with Door Rail
Plate, Modified 1 x 2 with Door Rail
White×8
Plate, Modified 1 x 2 with Door Rail
Plate, Modified 1 x 2 with Door Rail
Red×3
Slope 45 6 x 4 x 2/3 Double
Slope 45 6 x 4 x 2/3 Double
White×2
Slope, Curved 2 x 2 x 2/3 Inverted
Slope, Curved 2 x 2 x 2/3 Inverted
White×4
Slope, Curved 2 x 2 x 2/3 Inverted
Slope, Curved 2 x 2 x 2/3 Inverted
Bright Light Blue×2
Bar   1L with 1 x 1 Round Plate with Hollow Stud
Bar 1L with 1 x 1 Round Plate with Hollow Stud
Red×3
Hot Dog / Sausage
Hot Dog / Sausage
Red×4
Tile, Modified 2 x 2 with Studs on Edge
Tile, Modified 2 x 2 with Studs on Edge
Dark Bluish Gray
Plate 1 x 8
Plate 1 x 8
Red
Plate, Round 1 x 2 with Open Studs
Plate, Round 1 x 2 with Open Studs
Tan×4
Plate, Round 1 x 2 with Open Studs
Plate, Round 1 x 2 with Open Studs
Red×6
Plate, Round 1 x 2 with Open Studs
Plate, Round 1 x 2 with Open Studs
Light Bluish Gray×2
Brick 1 x 3
Brick 1 x 3
White×3
Brick 1 x 3
Brick 1 x 3
Bright Light Blue
Plate 1 x 3
Plate 1 x 3
Bright Light Blue×5
Slope, Inverted 45 2 x 2 with Flat Bottom Pin
Slope, Inverted 45 2 x 2 with Flat Bottom Pin
Bright Light Blue×4
Plate 1 x 6
Plate 1 x 6
Red
Plate 1 x 4
Plate 1 x 4
White×3
Plate 1 x 4
Plate 1 x 4
Red×2
Plate 1 x 4
Plate 1 x 4
Black×2
Plate 2 x 6
Plate 2 x 6
White
Plate 2 x 6
Plate 2 x 6
Bright Light Blue×3
Vehicle, Steering Stand 1 x 2 with Black Steering Wheel
Vehicle, Steering Stand 1 x 2 with Black Steering Wheel
Black
Sticker Sheet for Set 40681 - (10107511/6480271)
Sticker Sheet for Set 40681 - (10107511/6480271)
(Not Applicable)
Plate, Round 1 x 1
Plate, Round 1 x 1
Light Bluish Gray×5
Minifigure, Utensil Seat / Chair 2 x 2
Minifigure, Utensil Seat / Chair 2 x 2
Dark Bluish Gray
Plate, Modified 1 x 1 with Open O Clip Thick (Vertical Grip)
Plate, Modified 1 x 1 with Open O Clip Thick (Vertical Grip)
Red×2
Tile 1 x 8
Tile 1 x 8
White×2
Plate, Modified 1 x 4 with 2 Studs with Groove
Plate, Modified 1 x 4 with 2 Studs with Groove
White×2
Windscreen 2 x 6 x 2
Windscreen 2 x 6 x 2
Trans-Clear
Plate 1 x 10
Plate 1 x 10
White
Plate, Modified 1 x 2 with Open O Clip on Top
Plate, Modified 1 x 2 with Open O Clip on Top
White×2
Plate, Modified 2 x 2 with Wheel Holder
Plate, Modified 2 x 2 with Wheel Holder
Light Bluish Gray×4
Cone 1 x 1 with Top Groove
Cone 1 x 1 with Top Groove
Tan×3
Cone 1 x 1 with Top Groove
Cone 1 x 1 with Top Groove
Yellow×3
Cone 1 x 1 with Top Groove
Cone 1 x 1 with Top Groove
Red×3
Pneumatic T Piece Second Version (T Bar with Ball in Center)
Pneumatic T Piece Second Version (T Bar with Ball in Center)
Light Bluish Gray×2
Plate, Modified 1 x 2 with Bar Handle on Side - Closed Ends
Plate, Modified 1 x 2 with Bar Handle on Side - Closed Ends
Light Bluish Gray
Panel 1 x 2 x 1 with Rounded Corners
Panel 1 x 2 x 1 with Rounded Corners
Red
Bar   1L with Clip Mechanical Claw - Cut Edges and Hole on Side
Bar 1L with Clip Mechanical Claw - Cut Edges and Hole on Side
Black
Vehicle, Mudguard 3 x 3 x 1 with Arch Round
Vehicle, Mudguard 3 x 3 x 1 with Arch Round
White×4
Slope, Curved 3 x 1
Slope, Curved 3 x 1
Bright Light Blue×2
Wedge 4 x 6 x 2/3 Triple Curved
Wedge 4 x 6 x 2/3 Triple Curved
White
Slope 30 1 x 1 x 2/3
Slope 30 1 x 1 x 2/3
White×6
Slope 30 1 x 1 x 2/3
Slope 30 1 x 1 x 2/3
Bright Light Blue×5
Slope, Curved 2 x 1 x 1 1/3 with Recessed Stud
Slope, Curved 2 x 1 x 1 1/3 with Recessed Stud
White×2
Slope 18 2 x 1 x 2/3 with Grille
Slope 18 2 x 1 x 2/3 with Grille
Light Bluish Gray×2
Bar   6L with Stop Ring
Bar 6L with Stop Ring
Dark Bluish Gray
Bar   1L with Angled Hollow Stud
Bar 1L with Angled Hollow Stud
Trans-Clear×3
Tile 1 x 6
Tile 1 x 6
White
Plate, Round 1 x 3 with Open Studs
Plate, Round 1 x 3 with Open Studs
White×8
Bar   2L with Stop Ring
Bar 2L with Stop Ring
Dark Bluish Gray×2
Plate, Round 1 x 1 with Open Stud
Plate, Round 1 x 1 with Open Stud
Red×9
Plate, Round 1 x 1 with Open Stud
Plate, Round 1 x 1 with Open Stud
Lime×5
Slope 30 1 x 2 x 2/3
Slope 30 1 x 2 x 2/3
White
Slope 30 1 x 2 x 2/3
Slope 30 1 x 2 x 2/3
Black
Slope 30 1 x 2 x 2/3
Slope 30 1 x 2 x 2/3
Light Bluish Gray
Tile 2 x 4
Tile 2 x 4
White
Panel 1 x 2 x 2 with Side Supports - Hollow Studs
Panel 1 x 2 x 2 with Side Supports - Hollow Studs
Trans-Clear×2
Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper)
Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper)
White×2
Tile, Round 1 x 1
Tile, Round 1 x 1
Trans-Clear×5
Tile, Round 1 x 1
Tile, Round 1 x 1
Trans-Red×3
Tile, Round 1 x 1
Tile, Round 1 x 1
Dark Bluish Gray×2
Tile, Round 1 x 1 with Dark Bluish Gray Outlined Number 5 on Silver Background Coin Pattern
Tile, Round 1 x 1 with Dark Bluish Gray Outlined Number 5 on Silver Background Coin Pattern
Flat Silver×2
Bracket 1 x 2 - 2 x 2 Inverted
Bracket 1 x 2 - 2 x 2 Inverted
Dark Bluish Gray×4
Bracket 1 x 2 - 2 x 2 Inverted
Bracket 1 x 2 - 2 x 2 Inverted
Bright Light Blue×4
Bracket 1 x 2 - 1 x 2
Bracket 1 x 2 - 1 x 2
White×3

Common questions about Retro Food Truck

How much is LEGO Retro Food Truck (40681-1) worth?

Retro Food Truck sells for an average of $33.58 used and $35.46 new/sealed on BrickLink based on 6 months of completed sales. Current retail availability may affect secondary market prices. Actual prices vary with completeness — missing minifigures or key parts will lower the value.

What minifigures come in LEGO set 40681-1?

This set includes 2 minifigures: Retro Food Truck Vendor - Male, White Sweater with Red Horizontal Stripes, Blue Legs, Red Cap, Sweat Drops ($1.58), Retro Food Truck Customer ($1.53). The minifigures have a combined BrickLink value of $3.11. Each figure is linked above with individual pricing if you're looking to buy or sell specific characters.

Is it worth parting out LEGO Retro Food Truck?

The minifigures make up about 9% of the set value ($3.11 out of $33.58). Most of the value is in the complete set package, so selling it whole is likely the better move unless you have buyers lined up for specific figures.

Is LEGO Retro Food Truck (40681-1) retired?

Retro Food Truck was released in 2024. It may still be available at some retailers, but check availability — retirement could be approaching.

How do I check if my Retro Food Truck set is complete?

Use the parts list on this page to check every piece and all 2 minifigures. For the minifigures specifically, you can use the brick'em scanner to identify each figure from a photo and confirm it matches what should be in this set. Missing pieces can be individually sourced on BrickLink.

Explore more

All Ideas setsIdeas minifiguresMost valuable Ideas figsFree scanner