How much is LEGO Lavertus' Outland Base (70134-1) worth?

Lavertus' Outland Base sells for an average of $54.80 used and $69.48 new/sealed on BrickLink based on 6 months of completed sales. As a retired set, prices tend to hold steady or appreciate over time, especially for complete sets with original packaging. Actual prices vary with completeness. Missing minifigures or key parts will lower the value.

What minifigures come in LEGO set 70134-1?

This set includes 4 minifigures: Sparratus ($2.92), Blista ($5.95), Laval - Heavy Armor ($1.92), Lavertus - Flat Silver Heavy Armor ($2.98). The minifigures have a combined BrickLink value of $13.78. Each figure is linked above with individual pricing if you're looking to buy or sell specific characters.

Is it worth parting out LEGO Lavertus' Outland Base?

The minifigures make up about 25% of the set value ($13.78 out of $54.80). Most of the value is in the complete set package, so selling it whole is likely the better move unless you have buyers lined up for specific figures.

Is LEGO Lavertus' Outland Base (70134-1) retired?

Yes, Lavertus' Outland Base was released in 2014 and has been retired from retail for several years. Retired LEGO sets are only available on the secondary market through BrickLink, eBay, or other resale platforms.

How do I check if my Lavertus' Outland Base set is complete?

Use the parts list on this page to check every piece and all 4 minifigures. For the minifigures specifically, you can use the brick'em scanner to identify each figure from a photo and confirm it matches what should be in this set. Missing pieces can be individually sourced on BrickLink.

Lavertus' Outland Base

70134-1·Legends of Chima·2014·4 minifigs·195 parts

Used Avg

$54.80

New Avg

$69.48

Add to your inventory Scan the minifigs

About Lavertus' Outland Base

Lavertus' Outland Base (70134-1) is a LEGO Legends of Chima set released in 2014, currently averaging $54.80 used on BrickLink. It comes with 4 minifigures worth a combined $13.78. The set has retired from retail, so secondary market is the only option. The full parts inventory runs 195 pieces.

Parts (195)

Tile 6 x 6 with Bottom Tubes, Textured Surface

×2

Plate, Modified 2 x 2 with Pin Hole - Full Cross Support Underneath

×2

Plant Leaves 6 x 5 Swordleaf with Open O Clip Thick

×5

Technic, Gear 8 Tooth with Dual Face

×5

Bar Holder with Clip

×2

Minifigure, Weapon Sword, Double Blade with Bar Holder (Valious)

Rock 1 x 1 Crystal 4 Point (Brick, Round 1 x 1 with 4 Upward Fins / Points)

×2

Brick, Modified 1 x 2 with Studs on 1 Side

×2

Bracket 5 x 2 x 1 1/3 with 2 Holes and Bottom Tube

Plate, Modified 1 x 2 with Clip on Side (Horizontal Grip)

Slope, Curved 2 x 1 x 2/3

×15

Tile, Round 2 x 2 with Bottom Stud Holder

×2

Appendage Bony Small with Bar End (Leg / Rib / Tail)

×4

Minifigure, Weapon Gun, Blaster 1 x 2 x 2/3 with Studs on Sides and Handle

Plant Grass Stem

×4

Tile, Round 2 x 2 with Hole

×2

Tile, Modified 1 x 2 Grille with Bottom Groove

×8

Wedge, Plate 3 x 6 Cut Corners

×2

Plant Leaves 4 x 3

×3

Plant Leaves 4 x 3

×4

Hinge Plate 1 x 4 Swivel (2429 / 2430)

×4

Tile 1 x 4

Tile, Modified 1 x 2 with Bar Handle

Plate 2 x 12

×2

Brick 1 x 2 x 5

×8

Wheel Skateboard / Trolley

×2

Plate, Modified 1 x 2 with Bar Handle on Side - Free Ends

Tile, Modified 1 x 1 with Clip

×2

Plate, Round 2 x 2 with Rounded Bottom (Boat Stud)

Plate, Round 2 x 2 Thin with Wheel Holder

×2

Technic, Brick 1 x 10 with Holes

×2

Technic, Pin with Short Friction Ridges

×13

Technic, Liftarm, Modified Stud Connector Thin 1 x 4

Technic Engine Crankshaft Center

Brick 2 x 4

×3

Brick 2 x 3

×2

Brick 2 x 2

×13

Minifigure, Utensil Handlebars

Brick 1 x 2

×10

Brick 1 x 1

×10

Brick 1 x 6

×3

Brick 1 x 4

×3

Plate 2 x 4

×6

Plate 2 x 4

×4

Plate 2 x 3

×8

Plate 2 x 2

×8

Plate 2 x 2

Plate 1 x 2

×5

Plate 1 x 2

×4

Plate 1 x 2

×42

Plate 4 x 10

×2

Plate 4 x 4

Plate 2 x 8

×2

Plate 2 x 8

×3

Plate 4 x 8

×2

Plate 4 x 8

×2

Bar 4L (Lightsaber Blade / Wand)

Slope 45 2 x 2

×2

Brick, Modified 1 x 4 with Studs on Side

×3

Brick, Modified 1 x 2 with Pins

×2

Brick, Round 1 x 1

×3

Brick, Round 1 x 1

Tile 1 x 2

×8

Tile 1 x 2 with SW Avionics Control Panel with Copper, Red and Silver Display and Buttons Pattern

×2

Tile 1 x 2 with Red 82, Yellow and White Gauges Pattern

Tile 1 x 1

×2

Technic, Brick 1 x 2 with Holes

×5

Technic, Axle and Pin Connector Angled #5 - 112.5 degrees

Technic, Plate 1 x 5 with Smooth Ends, 4 Studs and Center Axle Hole

×2

Technic, Plate Rotor 3 Blade with Smooth Ends and 6 Studs (Propeller)

×6

Technic, Axle and Pin Connector Perpendicular 3L with Center Pin Hole

×2

Technic, Gear 20 Tooth Bevel

Technic, Axle 5.5L with Stop

Technic, Gear 20 Tooth Double Bevel

×2

Technic, Liftarm, Modified Bent Thick 1 x 9 (7 - 3)

×2

Technic, Liftarm Thin 1 x 4 - Axle Holes

×4

Technic, Pin 3L without Friction Ridges

×2

Plate 1 x 8

Brick 1 x 3

Plate 1 x 3

×2

Slope, Inverted 45 2 x 2 with Flat Bottom Pin

Plate 1 x 6

×2

Technic, Pin without Friction Ridges

×6

Slope 65 2 x 2 x 2 with Bottom Tube

×4

Slope 75 2 x 2 x 3 - Solid Studs

×2

Technic, Brick 1 x 2 with Hole

×11

Technic, Axle 4L

×3

Technic, Plate 2 x 4 with 3 Holes

×2

Plate 1 x 4

×4

Plate 1 x 4

×3

Technic, Gear Rack 1 x 4

×2

Technic, Axle 1L with Pin without Friction Ridges with Round Hole

×6

Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper)

×11

Minifigure, Utensil Axe

Technic, Brick 1 x 6 with Holes

×2

Hinge Brick 1 x 2 Base

Brick, Round 2 x 2 with Axle Hole

Cone 2 x 2 x 2 - Open Stud

Bracket 2 x 2 - 2 x 2 with 2 Holes

×5

Minifigure, Utensil Tool Spanner Wrench / Screwdriver

Plate, Round 2 x 2 with Axle Hole

×2

Plate, Round 2 x 2 with Axle Hole

×2

Brick, Modified 1 x 1 with Headlight

×2

Plate, Round 1 x 1

×2

Plate, Round 1 x 1

×3

Plate, Round 1 x 1

×12

Plate, Round 1 x 1

×3

Plate, Round 1 x 1

×15

Plate, Modified 1 x 1 with Open O Clip Thick (Vertical Grip)

×6

Plate, Modified 8 x 8 with Grille and Hole in Center

Technic, Liftarm Thin 1 x 2 - Axle Holes

×4

Wedge 6 x 2 Right

Wedge 6 x 2 Left

Wedge, Plate 4 x 2 Right

Wedge, Plate 4 x 2 Left

Technic Bush 1/2 Smooth

×3

Technic, Pin 1/2 without Friction Ridges

×3

Slope, Inverted 33 3 x 1

×4

Technic, Axle 1L with Pin with Friction Ridges

×11

Container, Box 2 x 2 x 2

×2

Container, Box 2 x 2 x 2 Door with Slot

×2

Dish 3 x 3 Inverted (Radar)

×3

Technic Rotation Joint Disk with Large Pin and 3L Liftarm Thick

×2

Technic, Axle 7L

Slope 75 2 x 1 x 3 - Hollow Stud

×10

Bracket 1 x 2 - 2 x 2

×4

Plate 1 x 10

Slope 10 6 x 8

Technic, Axle 3L

Minifigure, Utensil Tool Mallet / Hammer

Wedge 4 x 4 x 2/3 Triple Curved

Cone 1 x 1 with Top Groove

×11

Cone 1 x 1 with Top Groove

×9

Cone 1 x 1 with Top Groove

×4

Brick, Modified 1 x 2 x 2/3 with Studs on Sides and Extended Stud Receptacle

Pneumatic T Piece Second Version (T Bar with Ball in Center)

×3

Wedge 4 x 4 Triple Curved No Studs

×4

Bar 1L with Clip Mechanical Claw - Cut Edges and Hole on Side

×5

Slope, Curved 3 x 1

×2

Barb / Claw / Horn / Tooth - Small

×10

Slope 30 1 x 1 x 2/3

×12

Slope 30 1 x 1 x 2/3

×5

Wheel 18mm D. x 14mm with Pin Hole, Fake Bolts and Shallow Spokes

×8

Technic, Brick Modified 2 x 2 with Ball Joint and Axle Hole with 6 Holes in Ball

×2

Plate, Round 4 x 4 with Hole

×5

Plate, Modified 1 x 2 with Bar Handle on End

×5

Panel 1 x 4 x 3 with Side Supports - Hollow Studs

×2

Rock Panel 3 x 8 x 7 Triangular (LURP)

×2

Minifigure, Utensil Hose Nozzle Elaborate

×3

Technic, Pin 1/2 with 2L Bar Extension (Flick Missile)

×4

Plate, Modified 1 x 1 with Open O Clip (Horizontal Grip)

×2

Hinge Brick 2 x 2 Top Plate

Slope, Curved 4 x 1

×9

Tile, Modified 4 x 4 with Studs on Edge

Technic, Pin Connector Round 2L with Slot (Pin Joiner Round)

×3

Plate, Modified 1 x 2 with Clip on End (Horizontal Grip)

×2

Bar 6L with Stop Ring

Minifigure, Utensil Telescope

×6

Plate, Modified 4 x 4 with 2 x 2 Open Center

×3

Technic, Axle Connector 2L (Smooth with x Hole + Orientation)

×3

Technic, Brick 1 x 1 with Hole

×2

Plate, Modified 1 x 6 with Train Wagon End / Fence

×3

Technic, Axle 3L with Stud

×2

Technic, Gear 12 Tooth Bevel

×2

Technic, Pin with Friction Ridges and Tow Ball (Undetermined Type)

Tile 1 x 6

×4

Sticker Sheet for Set 70134, Sheet 1 - (16476/6061574)

Sticker Sheet for Set 70134, Sheet 2 - (17075/6065618)

Cylinder Half 2 x 4 x 5 with 1 x 2 Cutout

×2

Technic, Brick Modified 1 x 2 with Hole and Dual Liftarm Extensions

Slope 30 1 x 2 x 2/3

×3

Slope 30 1 x 2 x 2/3

×6

Slope 30 1 x 2 x 2/3

×6

Tile 2 x 4

Technic, Axle 4L with Stop

×4

Panel 1 x 2 x 3 with Side Supports - Hollow Studs

×2

Panel 1 x 2 x 2 with Side Supports - Hollow Studs

×2

Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper)

×3

Tire 24 x 14 Shallow Tread, Band Around Center of Tread

Hero Factory Arm / Leg with Ball Joint on Axle and Ball Socket and Pin Hole

×2

Hero Factory Armor with Ball Joint Socket - Size 8

×2

Plate, Modified 1 x 2 with Clip with Center Cut on Top

Tire 30.4 x 14 Offset Tread - Band Around Center of Tread

×3

Plate 8 x 16

Plate, Modified 1 x 4 with 2 Studs without Groove

Bar 1L with Top Stud and 2 Side Studs (Connector Perpendicular)

Minifigure, Weapon Gun, Two Barrel Pistol - 10-Rib Top Barrel

×2

Support 2 x 2 x 10 Girder Triangular Vertical - Type 4 - 3 Posts, 3 Sections

Brick and Axle Separator

Tile, Round 1 x 1

×9

Arm Mechanical, Exo-Force / Bionicle, Thick Support

×2

Bracket 1 x 2 - 2 x 2 Inverted

×2

Bracket 1 x 2 - 1 x 2 Inverted

×5

Bracket 1 x 2 - 1 x 2

×2

Tread with 20 Treads Small

×2

Lavertus' Outland Base

About Lavertus' Outland Base

Part-out value

Minifigures in Lavertus' Outland Base (4)

Parts (195)

Common questions about Lavertus' Outland Base

How much is LEGO Lavertus' Outland Base (70134-1) worth?

What minifigures come in LEGO set 70134-1?

Is it worth parting out LEGO Lavertus' Outland Base?

Is LEGO Lavertus' Outland Base (70134-1) retired?

How do I check if my Lavertus' Outland Base set is complete?

More Legends of Chima sets

Explore more

Company

Legal