How much is LEGO King Crominus' Rescue (70227-1) worth?

King Crominus' Rescue sells for an average of $100.00 used and $138.89 new/sealed on BrickLink based on 6 months of completed sales. As a retired set, prices tend to hold steady or appreciate over time, especially for complete sets with original packaging. Actual prices vary with completeness. Missing minifigures or key parts will lower the value.

What minifigures come in LEGO set 70227-1?

This set includes 6 minifigures: Strainor - Heavy Armor ($2.39), Cragger - Armor Breastplate, Flame Wings ($8.50), Saraw ($4.86), Crominus - Fire Chi ($5.45), plus 2 more. The minifigures have a combined BrickLink value of $34.05. Each figure is linked above with individual pricing if you're looking to buy or sell specific characters.

Is it worth parting out LEGO King Crominus' Rescue?

The minifigures make up about 34% of the set value ($34.05 out of $100.00). Most of the value is in the complete set package, so selling it whole is likely the better move unless you have buyers lined up for specific figures.

Is LEGO King Crominus' Rescue (70227-1) retired?

Yes, King Crominus' Rescue was released in 2015 and has been retired from retail for several years. Retired LEGO sets are only available on the secondary market through BrickLink, eBay, or other resale platforms.

How do I check if my King Crominus' Rescue set is complete?

Use the parts list on this page to check every piece and all 6 minifigures. For the minifigures specifically, you can use the brick'em scanner to identify each figure from a photo and confirm it matches what should be in this set. Missing pieces can be individually sourced on BrickLink.

King Crominus' Rescue

70227-1·Legends of Chima·2015·6 minifigs·241 parts

Used Avg

$100.00

New Avg

$138.89

Add to your inventory Scan the minifigs

About King Crominus' Rescue

King Crominus' Rescue (70227-1) is a LEGO Legends of Chima set released in 2015, currently averaging $100.00 used on BrickLink. It comes with 6 minifigures worth a combined $34.05. The set has retired from retail, so secondary market is the only option. The full parts inventory runs 241 pieces.

Parts (241)

Technic, Axle and Pin Connector Hub with 2 Perpendicular Axles

×2

Plate, Modified 2 x 2 with Pin Hole - Full Cross Support Underneath

×2

Plate, Modified 2 x 2 with Pin Hole - Full Cross Support Underneath

×2

Barb / Claw / Horn / Tooth - Large

×2

Minifigure, Weapon Sword, Double Blade with Bar Holder (Valious)

Minifigure, Weapon Sword, Serrated with Bar Holder (Vengious)

Rock 1 x 1 Crystal 4 Point (Brick, Round 1 x 1 with 4 Upward Fins / Points)

×2

Plate 3 x 3

×2

Bracket 5 x 2 x 1 1/3 with 2 Holes and Bottom Tube

×2

Windscreen 4 x 4 x 4 2/3 with Bar Handle

Slope, Curved 2 x 1 x 2/3

×4

Slope, Curved 2 x 1 x 2/3

×2

Slope, Curved 2 x 1 x 2/3

×2

Minifigure, Weapon Blade with Bar Handle and Spikes

×2

Slope, Curved 4 x 1 Inverted

×2

Slope, Curved 4 x 1 Inverted

×2

Minifigure, Weapon Sword, Double Blade Serrated with Bar Holder

Technic, Liftarm, Modified H-Shape Thick 3 x 5 Perpendicular

Tile, Round 2 x 2 with Bottom Stud Holder with Dark Red, Orange, Red, White and Yellow Swirled Fire Pattern

×4

Slope, Curved 2 x 2 x 2/3

×2

Plate, Modified 1 x 1 with Tooth Vertical

×5

Rock Panel 2 x 4 x 3 with Fractures (Chima Ice Cage)

Technic, Pin with Friction Ridges and Pin Hole

×2

Plate, Modified 1 x 2 with 3 Teeth

Hero Factory Weapon, Claw Wide Curved

×2

Technic, Pin Connector 3L with 2 Pins and Center Hole

×2

Technic, Axle 5L with Stop

×2

Tile, Round 2 x 2 with Hole

×2

Slope 45 2 x 1 Triple with Bottom Stud Holder

×2

Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)

×3

Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)

×2

Tile, Modified 1 x 1 with Open O Clip

×2

Wave Rounded Straight Bar 4L (Flame) with Marbled Trans-Yellow Pattern

×2

Projectile Launcher, 1 x 4 with Inside Clips (Disk Shooter)

×2

Wave Rounded Curved Single with Bar End and Triangular Base (Flame)

×2

Wave Rounded Curved Double with Axle End (Flame) with Marbled Bright Light Orange Pattern

×6

Technic, Liftarm Thick 1 x 1 (Spacer)

×6

Tile, Modified 1 x 2 Grille with Bottom Groove

×2

Tile, Modified 1 x 2 Grille with Bottom Groove

×4

Wedge, Plate 3 x 6 Cut Corners

Plate 2 x 2 Corner

×4

Tile 1 x 4

×2

Tile, Modified 1 x 2 with Bar Handle

Bracket 1 x 2 - 1 x 4 with Rounded Corners

×4

Plate 2 x 12

×2

Wedge, Plate 3 x 3 Cut Corner

×2

Plate, Round 2 x 2 with Rounded Bottom (Boat Stud)

×2

Technic, Axle 1L with Tow Ball

×2

Technic, Pin with Short Friction Ridges

×38

Brick, Modified 1 x 2 with Grille / Fluted Profile

×3

Brick, Modified 1 x 2 with Grille / Fluted Profile

Brick 2 x 4

Brick 2 x 2

×2

Brick 1 x 2

×2

Brick 1 x 1

×2

Plate 2 x 4

×12

Plate 2 x 4

×3

Plate 2 x 3

×3

Plate 2 x 3

×4

Plate 2 x 2

×2

Plate 2 x 2

×4

Plate 1 x 2

×2

Plate 1 x 2

×23

Plate 1 x 2

×2

Plate 1 x 2

×4

Plate 4 x 10

Plate 4 x 4

Plate 4 x 6

Plate 2 x 8

×3

Slope 45 2 x 4

×2

Bar 4L (Lightsaber Blade / Wand)

Arm Mechanical, Battle Droid

×5

Hinge Plate 1 x 2 Locking with 1 Finger on Top

×2

Slope 45 2 x 2

Slope 45 2 x 2 with Control Panel with Red and Green Lamps Pattern

Wedge, Plate 4 x 4 Cut Corner

×4

Wedge, Plate 4 x 4 Cut Corner

×2

Hinge Cylinder 1 x 2 Locking with 2 Fingers and Axle Hole on Ends with Slots

×2

Brick, Round 1 x 1

Tile 2 x 2

×2

Tile 1 x 2

Technic, Brick 1 x 2 with Holes

×4

Technic, Pin 3/4

×3

Technic, Liftarm, Modified Bent Thick 1 x 11.5 Double

×8

String Reel 3 x 2 x 3 Drum with Axle Hole

×2

Technic, Axle and Pin Connector Angled #2 - 180 degrees

×2

Technic, Axle Connector with Axle Hole

×6

Technic, Axle Connector with Axle Hole

×2

Technic, Pin 3L with Friction Ridges and Stop Bush

×6

Technic, Liftarm, Modified Bent Thin L-Shape 3 x 3

×4

Technic, Axle 2L Notched

×14

Technic, Axle 5L

×2

Technic, Liftarm, Modified Bent Thick L-Shape 2 x 4

Technic, Axle and Pin Connector Perpendicular 3L with Center Pin Hole

×2

Technic, Gear 12 Tooth Double Bevel

Technic, Liftarm, Modified Bent Thick 1 x 7 (4 - 4)

×3

Technic, Liftarm, Modified Bent Thick 1 x 7 (4 - 4)

×4

Technic, Liftarm Thin 1 x 4 - Axle Holes

×12

Technic, Liftarm Thick 1 x 3

×4

Technic, Liftarm Thick 1 x 7

×2

Technic, Liftarm Thick 1 x 11

×2

Technic, Liftarm, Modified Bent Thick L-Shape 3 x 5

×4

Technic, Brick 4 x 6 Open Center

Technic, Brick 5 x 5 Right Angle (1 x 4 - 1 x 4)

×4

Slope 33 2 x 2 Double

Plate 1 x 8

Brick 1 x 3

×2

Plate 1 x 3

×4

Technic, Gear 24 Tooth with 1 Axle Hole

Slope, Inverted 45 2 x 2 with Flat Bottom Pin

×5

Plate 1 x 6

×4

Technic, Brick 1 x 2 with Hole

×7

Technic, Brick 1 x 4 with Holes

×3

Technic, Brick 1 x 8 with Holes

×4

Technic, Brick 1 x 16 with Holes

×4

Technic, Axle 4L

×3

Technic, Axle 8L

Technic, Plate 2 x 4 with 3 Holes

×2

Plate 1 x 4

×3

Technic Bush

×12

Technic Bush

×5

Technic, Axle 10L

Technic, Gear Rack 1 x 4

Technic, Axle 1L with Pin without Friction Ridges with Round Hole

×5

Plate 2 x 6

×2

Plate 2 x 10

Plate, Modified 1 x 2 with Bar Handles - Flat Ends, Low Attachment

Technic, Link Tread

×54

Technic, Brick 1 x 6 with Holes

×2

Plate, Round 2 x 2 with Axle Hole

×3

Plate, Round 2 x 2 with Axle Hole

×5

Technic, Liftarm Thick 1 x 9

×2

Plate, Round 1 x 1

×9

Plate, Modified 1 x 1 with Light Attachment - Thick Ring

×2

Plate, Modified 1 x 1 with Light Attachment - Thick Ring

×2

Plate, Modified 1 x 1 with Open O Clip Thick (Vertical Grip)

×16

Tile 1 x 8

×2

Vehicle, Mudguard 2 x 4 with Flared Wings

Wedge 12 x 3 Right

Wedge 12 x 3 Left

Technic Bush 1/2 Smooth

×9

Technic, Pin 1/2 without Friction Ridges

×29

Slope, Inverted 33 3 x 1

×4

Technic, Axle 1L with Pin with Friction Ridges

×10

Wedge 4 x 2 Triple Left

Wedge 4 x 2 Triple Right

Wedge, Plate 3 x 2 Right

Wedge, Plate 3 x 2 Left

Technic, Axle 7L

Hinge Plate 1 x 2 Locking with 1 Finger on Side with Bottom Groove

Bracket 1 x 2 - 2 x 2

×8

Plate 1 x 10

×2

Technic, Axle 3L

×17

Wedge 4 x 4 x 2/3 Triple Curved

×2

Cone 1 x 1 with Top Groove

×4

Tap 1 x 1 without Hole in Nozzle End

×2

Plate, Modified 1 x 2 with Bar Arm Up (Horizontal Arm 5mm)

×2

Brick, Modified 1 x 1 with Studs on 4 Sides

Slope, Curved 2 x 2 x 2/3 with 2 Studs and Curved Sides

Wedge 4 x 4 Triple Curved No Studs

Plate, Modified 1 x 2 with Bar Handle on Side - Closed Ends

Vehicle, Air Scoop Engine Top 2 x 2

Wedge, Plate 2 x 4

×2

Barb / Claw / Horn / Tooth - Small

×18

Slope 30 1 x 1 x 2/3

×3

Slope 30 1 x 1 x 2/3

×5

Slope 30 1 x 1 x 2/3

×10

Technic, Pin Connector Perpendicular 3 x 3 Bent with 4 Pins

×2

Wheel 30.4mm D. x 20mm with No Pin Holes and Reinforced Rim

×2

Technic, Axle Connector Hub with 3 Axles

×2

Wheel 31mm D. x 15mm Technic

×2

Plate, Modified 1 x 2 with 2 Open O Clips (Horizontal Grip)

Hinge Plate 1 x 2 Locking with 2 Fingers on Side

Plate 1 x 12

×2

Technic, Liftarm Thick 1 x 2 - Axle Hole

×4

Technic, Liftarm, Modified T-Shape Thick 3 x 3

×4

Slope, Curved 2 x 1 x 1 1/3 with Recessed Stud

×2

Technic, Pin 1/2 with 2L Bar Extension (Flick Missile)

×4

Hinge Brick 2 x 2 Top Plate

Slope 18 2 x 1 x 2/3 with Grille

×2

Slope 18 2 x 1 x 2/3 with Grille

×4

Tire 43.2mm D. x 26mm Balloon Small

×2

Slope, Curved 4 x 1

×2

Plate, Modified 2 x 16 with Angled Side Extensions and Axle Hole (Rotor Blade)

×6

Bar 6L with Stop Ring

Technic, Liftarm, Modified Ball Joint Straight 1 x 2 with 1 Hole in Ball

Minifigure, Weapon Lightsaber Hilt Straight

×2

Minifigure, Utensil Telescope

Minifigure, Plume Feather Triple Compact / Flame / Water with Small Pin

×2

Wedge 4 x 4 Fractured Polygon Top

Technic, Axle Connector 2L (Smooth with x Hole + Orientation)

×8

Technic, Axle Connector 2L (Smooth with x Hole + Orientation)

×4

Technic, Axle 2L with Reverser Handle Axle Connector

×6

Technic, Pin 3L with Friction Ridges

×18

Technic, Gear 12 Tooth Bevel

×4

Technic, Pin with Friction Ridges and Tow Ball (Undetermined Type)

×4

Technic, Liftarm, Modified Bent Thick 1 x 9 (6 - 4)

×2

Tile 1 x 6

×2

Tile 1 x 6

×2

Sticker Sheet for Set 70227 - Transparent Background Version - (21329/6115813)

Plate, Modified 2 x 2 with Bar Frame Octagonal, Reinforced, Completely Round Studs

×2

Bracket 5 x 2 x 2 1/3 with 2 Holes and Bottom Stud Holder

Slope, Curved 10 x 1

×4

Slope 30 1 x 2 x 2/3

×4

Slope 30 1 x 2 x 2/3

×2

Slope 30 1 x 2 x 2/3

×3

Tile 2 x 4

×3

Technic, Axle 4L with Stop

×10

Technic, Gear 20 Tooth Bevel with Pin Hole

×2

Technic, Pin Connector Toggle Joint Smooth Double with Axle and Pin Holes

×2

Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper)

Barb / Claw / Horn / Tooth - Medium

×3

Plate, Modified 1 x 2 with Clip with Center Cut on Top

×2

Hinge Plate 2 x 2 Locking with 1 Finger on Top

Plate, Modified 1 x 4 with 2 Studs without Groove

×2

Plate, Modified 1 x 4 with 2 Studs without Groove

×8

Bar 1L with Top Stud and 2 Side Studs (Connector Perpendicular)

Brick, Round 2 x 2 with Axle Hole and Grille / Fluted Profile

Slope, Curved 4 x 1 x 2/3 Double

×4

Slope, Curved 4 x 1 x 2/3 Double

×5

Technic, Gear 16 Tooth - Axle Hole with Closed Sides

×2

Brick and Axle Separator

Tile, Round 1 x 1

×3

Tile, Round 1 x 1

×3

Brick, Modified 1 x 2 with Masonry Profile

×2

Hero Factory Foot, Large with 2 Toes

×4

Plate, Modified 2 x 2 x 2/3 with 2 Studs on Side

Bracket 1 x 2 - 2 x 2 Inverted

×6

Bracket 1 x 2 - 1 x 2 Inverted

Bracket 1 x 2 - 1 x 2

×3

Rubber Belt Medium (Round Cross Section) - Approx. 3 x 3

×2

Engine, Large, Center, 10 Blades

×2

King Crominus' Rescue

About King Crominus' Rescue

Part-out value

Seller notes

Minifigures in King Crominus' Rescue (6)

Parts (241)

Common questions about King Crominus' Rescue

How much is LEGO King Crominus' Rescue (70227-1) worth?

What minifigures come in LEGO set 70227-1?

Is it worth parting out LEGO King Crominus' Rescue?

Is LEGO King Crominus' Rescue (70227-1) retired?

How do I check if my King Crominus' Rescue set is complete?

More Legends of Chima sets

Explore more

Company

Legal