How much is LEGO El Fuego's Stunt Truck (70421-1) worth?

El Fuego's Stunt Truck sells for an average of $15.67 used and $24.96 new/sealed on BrickLink based on 6 months of completed sales. As a retired set, prices tend to hold steady or appreciate over time, especially for complete sets with original packaging. Actual prices vary with completeness. Missing minifigures or key parts will lower the value.

What minifigures come in LEGO set 70421-1?

This set includes 4 minifigures: Jack Davids - White Hoodie with Cap and Hood (Lopsided Smile / Scared) ($1.50), Douglas Elton / El Fuego - Coveralls with Helmet and Cape ($2.09), Dwayne ($2.11), Joey ($2.18). The minifigures have a combined BrickLink value of $7.87. Each figure is linked above with individual pricing if you're looking to buy or sell specific characters.

Is it worth parting out LEGO El Fuego's Stunt Truck?

The minifigures make up about 50% of the set value ($7.87 out of $15.67). Most of the value is in the complete set package, so selling it whole is likely the better move unless you have buyers lined up for specific figures.

Is LEGO El Fuego's Stunt Truck (70421-1) retired?

Yes, El Fuego's Stunt Truck was released in 2019 and has been retired from retail for several years. Retired LEGO sets are only available on the secondary market through BrickLink, eBay, or other resale platforms.

How do I check if my El Fuego's Stunt Truck set is complete?

Use the parts list on this page to check every piece and all 4 minifigures. For the minifigures specifically, you can use the brick'em scanner to identify each figure from a photo and confirm it matches what should be in this set. Missing pieces can be individually sourced on BrickLink.

El Fuego's Stunt Truck

70421-1·Monkie Kid·2019·4 minifigs·188 parts

Used Avg

$15.67

New Avg

$24.96

Add to your inventory Scan the minifigs

About El Fuego's Stunt Truck

El Fuego's Stunt Truck (70421-1) is a LEGO Monkie Kid set released in 2019, currently averaging $15.67 used on BrickLink. It comes with 4 minifigures worth a combined $7.87. The set has retired from retail, so secondary market is the only option. The full parts inventory runs 188 pieces.

Parts (188)

Technic, Gear 8 Tooth with Dual Face

×2

Bar Holder with Clip

Technic, Axle 1L with Pin 2L with Friction Ridges

×2

Slope, Curved 2 x 1 x 2/3

×2

Minifigure, Utensil Paint Roller Brush Handle

Wheel 18mm D. x 8mm with Fake Bolts and Deep Spokes with Inner Ring

Panel 1 x 4 x 2 with Side Supports - Hollow Studs

×2

Technic, Pin with Friction Ridges and Pin Hole

×4

Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)

×5

Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)

×2

Technic, Axle 2L with Pin with Friction Ridges

×2

Bracket 3 x 2 x 1 1/3 with Bottom Tube

×2

Tile, Round 2 x 2 with Open Stud

Wheel 18mm D. x 12mm with Axle Hole and Stud, Solid Brake Rotor Lines

Technic, Pin Double Triangle 1 x 3 with 2 Clips with Squared Pin Holes

Tile, Modified 2 x 3 Pentagonal

Brick, Modified 1 x 2 x 1 2/3 with Studs on Side

×2

Slope, Inverted 45 6 x 2 Double with 2 x 4 Cutout

×3

Tile, Modified 1 x 2 Grille with Bottom Groove

×5

Plate 2 x 2 Corner

×2

Slope, Curved 2 x 1 x 2/3 Inverted

×2

Tile, Round 1 x 1 Half Circle Extended

×5

Wedge, Plate 2 x 2 Left

Wedge, Plate 2 x 2 Right

Tile, Modified 1 x 2 with Bar Handle

Wedge, Plate 3 x 3 Cut Corner

×4

Brick 2 x 6

×2

Plate 4 x 4 Corner

×2

Wedge, Plate 2 x 2 Cut Corner

Technic, Pin with Short Friction Ridges

×25

Slope 45 2 x 1 with Cutout without Stud

×2

Wedge 2 x 1 x 2/3 Right

×2

Wedge 2 x 1 x 2/3 Left

×2

Plate, Modified 1 x 4 with Wheels Holder

Brick 2 x 4

×3

Brick 2 x 2

Minifigure, Utensil Handlebars

Brick 1 x 2

Brick 1 x 1

×2

Brick 1 x 8

Minifigure, Utensil Camera Handheld Style with Extended Bar Handle

Brick 1 x 4

×3

Minifigure, Weapon Gun, Pistol Revolver - Large Barrel and Solid Handle

×2

Plate 2 x 4

Plate 2 x 3

×4

Plate 1 x 2

×4

Plate 1 x 1

×4

Plate 4 x 4

×4

Plate 4 x 6

×2

Plate 2 x 8

×2

Vehicle, Steering Wheel Small, 2 Studs Diameter

Tile 1 x 2

Tile 1 x 2 with Black and Yellow Danger Stripes (Large Yellow Corners) Pattern

×2

Tile 1 x 2 with Cell Phone / Smartphone and Medium Azure Ghost Pattern

Plate, Modified 2 x 3 with Hole

Technic, Brick 1 x 2 with Holes

×5

Technic, Pin 3/4

×4

Technic, Axle and Pin Connector Angled #1

×2

Technic, Axle and Pin Connector Angled #3 - 157.5 degrees

Plate, Modified 1 x 2 with Door Rail

×8

Technic, Axle Connector with Axle Hole

×2

Technic, Pin 3L with Friction Ridges and Stop Bush

Technic, Axle 2L Notched

×2

Technic, Axle 2L Notched

Technic, Brick 1 x 2 with Axle Hole

×4

Technic, Axle 5L

×2

Technic, Axle 5.5L with Stop

×4

Technic, Liftarm Thin 1 x 4 - Axle Holes

×2

Technic, Liftarm Thick 1 x 3

×2

Technic, Liftarm, Modified Bent Thick L-Shape 3 x 5

×2

Technic, Pin Connector Plate 1 x 2 x 1 2/3 with 2 Holes on Top

×2

Technic, Brick 4 x 6 Open Center

Technic, Pin 3L without Friction Ridges

Bar 1L with 1 x 1 Round Plate with Hollow Stud

×4

Brick, Modified 1 x 1 x 1 2/3 with Studs on Side

Tile, Modified 2 x 2 with Studs on Edge

Plate 1 x 8

×3

Plate 1 x 8

×2

Plate, Round 1 x 2 with Open Studs

×3

Plate 1 x 3

×3

Minifigure, Head Alien Ghost with Yellowish Green Face, Dark Green Bushy Eyebrows, Lime Eye Shadow, Green Open Mouth with Sharp Teeth and Tongue, Flames on Back Pattern

Minifigure, Head Alien Female Ghost with Yellowish Green Face, Dark Green Eyebrows, Double Eyelashes, Lime Eye Shadow, Green Angry Open Mouth with Slime, Sharp Teeth and Tongue, Flames on Back Pattern

Technic, Gear 24 Tooth with 1 Axle Hole

×2

Slope, Inverted 45 2 x 2 with Flat Bottom Pin

×2

Slope, Inverted 45 2 x 2 with Flat Bottom Pin

×4

Plate 1 x 6

Bracket 1 x 1 - 1 x 1

Technic, Brick 1 x 2 with Hole

×2

Technic, Brick 1 x 4 with Holes

×2

Technic, Brick 1 x 4 with Holes

×3

Technic, Brick 1 x 16 with Holes

×2

Technic, Axle 4L

×3

Technic, Axle 6L

Technic, Plate 2 x 4 with 3 Holes

Plate 1 x 4

×2

Plate 1 x 4

×4

Technic Bush

×5

Slope, Curved 1 x 2 with Bottom Stud Holder

×2

Technic, Axle 1L with Pin without Friction Ridges with Round Hole

×4

Plate 2 x 6

×2

Minifigure, Utensil Shovel / Spade - Handle with Round End

Technic, Brick 2 x 4 with 3 Axle Holes

Plate, Round 2 x 2 with Axle Hole

×4

Plate, Round 2 x 2 with Axle Hole

Brick, Modified 1 x 1 with Headlight

×2

Plate, Round 1 x 1

×2

Minifigure, Utensil Seat / Chair 2 x 2

Plate, Modified 1 x 1 with Light Attachment - Thick Ring

×2

Tile 1 x 8

×2

Technic, Liftarm Thin 1 x 2 - Axle Holes

×2

Technic, Axle and Pin Connector Perpendicular Double Split

×2

Plate, Modified 1 x 4 with 2 Studs with Groove

×2

Plate, Modified 2 x 2 with Vents

Technic, Axle and Pin Connector Perpendicular 3L with 2 Pin Holes

Wheel 11mm D. x 8mm with Center Groove, 4 Spokes

Technic Bush 1/2 Smooth

×7

Technic, Pin 1/2 without Friction Ridges

×6

Technic, Axle 1L with Pin with Friction Ridges

×2

Tire 43.2 x 22 ZR

×4

Bracket 1 x 2 - 2 x 2

Technic, Axle 3L

×2

Dish 2 x 2 Inverted (Radar)

Slope, Curved 2 x 2 x 2/3 with 2 Studs and Curved Sides

Slope, Curved 1 x 2 x 2/3 Wing End

×2

Hinge 1 x 3 with Two Pins, Locking 1 Finger - Round Pin Holes

×2

Plate, Modified 1 x 1 with Tooth Horizontal

×4

Vehicle, Air Scoop Engine Top 2 x 2

Wedge 4 x 6 x 2/3 Triple Curved

Brick, Modified 1 x 2 with Studs on 2 Sides

×2

Dog, Ghost with Marbled White and Printed Black Eyes and Nose Pattern (Hidden Side Spencer)

Minifigure Beard, Long Wavy

Slope 30 1 x 1 x 2/3

×3

Wheel 18mm D. x 14mm with Axle Hole, Fake Bolts and Shallow Spokes

×2

Wheel 30.4mm D. x 20mm with No Pin Holes and Reinforced Rim

×4

Bar with Light Cover (Bulb) / Bionicle Barraki Eye

×3

Minifigure Wings Webbed Slime with Neck Bracket

Plate, Modified 1 x 2 with 2 Open O Clips (Horizontal Grip)

Hinge Plate 1 x 2 Locking with 2 Fingers on Side

×2

Brick, Modified 1 x 1 with Open O Clip (Vertical Grip) - Hollow Stud

Plate, Modified 1 x 2 with Bar Handle on End

×2

Minifigure, Utensil Hose Nozzle Elaborate

×2

Brick 1 x 12

×2

Tire 24mm D. x 7mm Offset Tread - Band Around Center of Tread

Technic, Axle and Pin Connector Block 4 x 3 x 2 1/2 (Linear Actuator Holder)

Technic, Pin Connector Round 2L with Slot (Pin Joiner Round)

Tile 1 x 3

×2

Technic, Axle Connector 2L (Smooth with x Hole + Orientation)

Technic, Brick 1 x 1 with Hole

×2

Technic, Pin 3L with Friction Ridges

×2

Technic, Liftarm, Modified Bent Thick 1 x 9 (6 - 4)

Tile 1 x 6

×6

Tile 1 x 6

×4

Sticker Sheet for Set 70421 - (60502/6273253)

Technic, Shock Absorber 6.5L with Black Piston Rod - Soft Spring, Standard Coils

Plate, Round 1 x 1 with Open Stud

×9

Technic, Brick Modified 1 x 2 with Hole and Dual Liftarm Extensions

Slope 30 1 x 2 x 2/3

×5

Tile 2 x 4

×2

Brick, Modified 1 x 1 with Stud on Side

×2

Bar 3L (Bar Arrow)

×2

Tire 24 x 14 Shallow Tread, Band Around Center of Tread

×2

Plate, Modified 1 x 2 with Clip with Center Cut on Top

Windscreen 3 x 6 x 2

Minifigure, Utensil Tool Crowbar

Slope, Curved 4 x 1 x 2/3 Double

×2

Slope, Curved 4 x 1 x 2/3 Double

×2

Bracket 1 x 2 - 2 x 4

×2

Minifigure, Headgear Helmet Sports / Flight

Wedge 3 x 4 x 2/3 Triple Curved

×2

Tile, Round 1 x 1

×9

Tile, Round 1 x 1 with Black Gauge with Red Pointer and Green, Yellow, and Red Tick Marks Pattern

×3

Pneumatic Hose Connector with Axle Connector

Bracket 1 x 2 - 2 x 2 Inverted

×9

Bracket 1 x 2 - 1 x 2 Inverted

×3

Bracket 1 x 2 - 1 x 2 Inverted

×2

Bracket 1 x 2 - 1 x 2

×3

El Fuego's Stunt Truck

About El Fuego's Stunt Truck

Part-out value

Seller notes

Minifigures in El Fuego's Stunt Truck (4)

Parts (188)

Common questions about El Fuego's Stunt Truck

How much is LEGO El Fuego's Stunt Truck (70421-1) worth?

What minifigures come in LEGO set 70421-1?

Is it worth parting out LEGO El Fuego's Stunt Truck?

Is LEGO El Fuego's Stunt Truck (70421-1) retired?

How do I check if my El Fuego's Stunt Truck set is complete?

More Monkie Kid sets

Explore more

Company

Legal