How much is LEGO Turbo Shredder (2263-1) worth?

Turbo Shredder sells for an average of $50.46 used and $107.33 new/sealed on BrickLink based on 6 months of completed sales. As a retired set, prices tend to hold steady or appreciate over time, especially for complete sets with original packaging. Actual prices vary with completeness. Missing minifigures or key parts will lower the value.

What minifigures come in LEGO set 2263-1?

This set includes 3 minifigures: Jay - The Golden Weapons ($5.09), Cole - The Golden Weapons ($5.72), Frakjaw (Skulkin) - Vertical Grip Hands, Armor, Conical Hat ($4.19). The minifigures have a combined BrickLink value of $14.99. Each figure is linked above with individual pricing if you're looking to buy or sell specific characters.

Is it worth parting out LEGO Turbo Shredder?

The minifigures make up about 30% of the set value ($14.99 out of $50.46). Most of the value is in the complete set package, so selling it whole is likely the better move unless you have buyers lined up for specific figures.

Is LEGO Turbo Shredder (2263-1) retired?

Yes, Turbo Shredder was released in 2011 and has been retired from retail for several years. Retired LEGO sets are only available on the secondary market through BrickLink, eBay, or other resale platforms.

How do I check if my Turbo Shredder set is complete?

Use the parts list on this page to check every piece and all 3 minifigures. For the minifigures specifically, you can use the brick'em scanner to identify each figure from a photo and confirm it matches what should be in this set. Missing pieces can be individually sourced on BrickLink.

Turbo Shredder

2263-1·Ninjago·2011·3 minifigs·108 parts

Used Avg

$50.46

New Avg

$107.33

Add to your inventory Scan the minifigs

About Turbo Shredder

Turbo Shredder (2263-1) is a LEGO Ninjago set released in 2011, currently averaging $50.46 used on BrickLink. It comes with 3 minifigures worth a combined $14.99. The set has retired from retail, so secondary market is the only option. The full parts inventory runs 108 pieces.

Part-out value

Parts (108)

Brick 2 x 2 Corner

Tile 1 x 4

×2

Bracket 1 x 2 - 1 x 4

Plate, Modified 2 x 2 with Pin Hole

×2

Plate, Modified 1 x 2 with Bar Handle on Side - Free Ends

×7

Tile, Modified 1 x 1 with Clip

×2

Brick, Modified 1 x 4 with Channel

×2

Technic, Pin with Short Friction Ridges

×30

Brick 2 x 4

Brick 2 x 3

×5

Brick 2 x 2

×2

Minifigure, Utensil Handlebars

Brick 1 x 2

×3

Brick 1 x 2

×4

Brick 1 x 1

Brick 1 x 6

Brick 1 x 4

Minifigure, Weapon Sword, Shamshir / Katana (Square Guard) with Uncapped Pommel and Hole in Hilt

Plate 2 x 4

×2

Plate 2 x 4

×3

Plate 2 x 3

×5

Plate 2 x 2

×2

Plate 2 x 2

Plate 1 x 2

×7

Plate 1 x 2

×2

Plate 1 x 2

×2

Bar 4L (Lightsaber Blade / Wand)

Arm Mechanical, Battle Droid

×2

Slope 45 2 x 3

×2

Brick, Modified 1 x 4 with Studs on Side

×2

Slope 45 2 x 1 Triple with Inside Bar

×4

Tile 2 x 2 with Ninjago Cracked Red Skull on Black Circle Pattern

Technic, Axle and Pin Connector Angled #6 - 90 degrees

Technic, Axle and Pin Connector Angled #5 - 112.5 degrees

×2

Technic, Brick 1 x 14 with Holes

×4

Technic, Pin 3L with Friction Ridges and Stop Bush

Technic, Axle 2L Notched

×2

Technic, Axle 5.5L with Stop

×2

Technic, Liftarm Thick 1 x 5

×3

Technic, Pin Connector Block 1 x 5 x 3

×2

Technic, Liftarm Thick 1 x 3

×5

Technic, Gear 8 Tooth

Technic, Gear 24 Tooth with 1 Axle Hole

Plate 1 x 6

×2

Technic, Pin without Friction Ridges

×2

Technic, Brick 1 x 2 with Hole

×4

Technic, Brick 1 x 4 with Holes

Technic, Brick 1 x 8 with Holes

Plate 1 x 4

×3

Slope, Inverted 33 3 x 2 with Flat Bottom Pin and Connections between Studs

Plate 2 x 6

×2

Plate 2 x 10

Technic, Brick 1 x 6 with Holes

×3

Plate, Round 2 x 2 with Axle Hole

Dinosaur Tail End Section / Horn

×6

Plate, Round 1 x 1

×3

Plate, Modified 1 x 1 with Light Attachment - Thick Ring

×2

Plate, Modified 1 x 1 with Light Attachment - Thick Ring

×2

Wedge, Plate 4 x 2 Right

×2

Wedge, Plate 4 x 2 Left

×2

Vehicle, Mudguard 2 x 4 with Flared Wings

×3

Wheel 11mm D. x 8mm with Center Groove, 4 Spokes

×2

Technic Bush 1/2 Smooth

×7

Technic, Pin 1/2 without Friction Ridges

×3

Technic, Axle 1L with Pin with Friction Ridges

×2

Wedge 4 x 2 Triple Left

Wedge 4 x 2 Triple Right

Wedge, Plate 3 x 2 Right

×3

Wedge, Plate 3 x 2 Right

Wedge, Plate 3 x 2 Left

×3

Wedge, Plate 3 x 2 Left

Slope, Curved 6 x 2

Slope, Curved 2 x 2 with Debossed Side Ports

Bracket 1 x 2 - 2 x 2

×2

Minifigure, Weapon Pike / Spear - Handle with Round End

Cone 1 x 1 with Top Groove

×8

Wedge 4 x 4 Triple Curved No Studs

×2

Plate, Modified 1 x 2 with Bar Handle on Side - Closed Ends

×4

Vehicle, Air Scoop Engine Top 2 x 2

Slope, Curved 3 x 1

×2

Slope, Curved 3 x 1

×2

Barb / Claw / Horn / Tooth - Small

×14

Arm Mechanical, Exo-Force / Bionicle, Thin Support

×6

Wheel 30.4mm D. x 20mm with No Pin Holes and Reinforced Rim

×6

Slope, Inverted 45 6 x 4 Double with 4 x 4 Cutout and 3 Holes

Plate, Modified 1 x 2 with 2 U Clips (Horizontal Grip)

×2

Slope 18 4 x 1

Technic, Liftarm Thick 1 x 2 - Axle Hole

Technic, Liftarm, Modified T-Shape Thick 3 x 3

×2

Brick, Modified 2 x 2 with Pin and Axle Hole

×2

Technic, Pin Connector Round 2L with Slot (Pin Joiner Round)

×2

Plate, Modified 1 x 2 with Clip on End (Horizontal Grip)

×4

Bar 6L with Stop Ring

×2

Wheel Hard Plastic with Small Cleats and Flanges

×4

Technic, Axle Connector 2L (Smooth with x Hole + Orientation)

×2

Technic, Pin 3L with Friction Ridges

×7

Technic, Axle 3L with Stud

×4

Wave Rounded Straight Large with Bar End (Flame) with Marbled Trans-Orange Pattern

×2

Slope, Curved 10 x 1

×2

Technic, Axle 4L with Stop

Brick, Modified 1 x 1 with Stud on Side

×4

Barb / Claw / Horn / Tooth - Medium

×2

Barb / Claw / Horn / Tooth - Medium

Bar 1L with Top Stud and 2 Side Studs (Connector Perpendicular)

Arm Skeleton, Bent with Clips at 90 degrees (Vertical Grip)

Tread with 36 Treads Large, Non-Technic

×2

Turbo Shredder

About Turbo Shredder

Part-out value

Seller notes

Minifigures in Turbo Shredder (3)

Parts (108)

Common questions about Turbo Shredder

How much is LEGO Turbo Shredder (2263-1) worth?

What minifigures come in LEGO set 2263-1?

Is it worth parting out LEGO Turbo Shredder?

Is LEGO Turbo Shredder (2263-1) retired?

How do I check if my Turbo Shredder set is complete?

More Ninjago sets

Explore more

Company

Legal