How much is LEGO Shuricopter (70673-1) worth?

Shuricopter sells for an average of $25.58 used and $83.90 new/sealed on BrickLink based on 6 months of completed sales. As a retired set, prices tend to hold steady or appreciate over time, especially for complete sets with original packaging. Actual prices vary with completeness. Missing minifigures or key parts will lower the value.

What minifigures come in LEGO set 70673-1?

This set includes 3 minifigures: General Vex ($4.67), Jay FS ($3.76), Zane - Secrets of the Forbidden Spinjitzu ($5.69). The minifigures have a combined BrickLink value of $14.13. Each figure is linked above with individual pricing if you're looking to buy or sell specific characters.

Is it worth parting out LEGO Shuricopter?

The minifigures make up about 55% of the set value ($14.13 out of $25.58). Most of the value is in the complete set package, so selling it whole is likely the better move unless you have buyers lined up for specific figures.

Is LEGO Shuricopter (70673-1) retired?

Yes, Shuricopter was released in 2019 and has been retired from retail for several years. Retired LEGO sets are only available on the secondary market through BrickLink, eBay, or other resale platforms.

How do I check if my Shuricopter set is complete?

Use the parts list on this page to check every piece and all 3 minifigures. For the minifigures specifically, you can use the brick'em scanner to identify each figure from a photo and confirm it matches what should be in this set. Missing pieces can be individually sourced on BrickLink.

Shuricopter

70673-1·Ninjago·2019·3 minifigs·151 parts

Used Avg

$25.58

New Avg

$83.90

Add to your inventory Scan the minifigs

About Shuricopter

Shuricopter (70673-1) is a LEGO Ninjago set released in 2019, currently averaging $25.58 used on BrickLink. It comes with 3 minifigures worth a combined $14.13. The set has retired from retail, so secondary market is the only option. The full parts inventory runs 151 pieces.

Part-out value

Parts (151)

Technic, Axle 1L with Pin 2L with Friction Ridges

×6

Plate, Modified 1 x 2 with Pin Hole on Top

×4

Slope, Curved 2 x 1 x 2/3

×2

Wedge 4 x 4 Triple Inverted with Connections between 4 Studs

×2

Tile, Round 2 x 2 with Bottom Stud Holder

Slope, Curved 2 x 2 x 2/3

Technic, Pin with Friction Ridges and Pin Hole

×2

Tile, Round 2 x 2 with Hole

×4

Projectile Launcher Part, Rapid Shooter Trigger Small

×2

Projectile Launcher Part, Rapid Shooter Six Barrel - Angled Barrels

×2

Technic, Axle 2L with Pin with Friction Ridges

×2

Technic, Liftarm Thick 1 x 1 (Spacer)

×3

Plate, Modified 1 x 2 with Pin Hole on Bottom

×2

Minifigure, Weapon Shuriken Throwing Star with Textured Grips, 2 on Sprue

×2

Minifigure, Weapon Sword, Shamshir / Katana (Square Guard) with Capped Pommel and Holes in Crossguard and Blade

×2

Windscreen 8 x 4 x 2 with 2 Studs and Bar Handle

Tile, Modified 2 x 3 Pentagonal

×4

Tile, Modified 2 x 3 Pentagonal

Technic, Axle 3L with Stop

Tile, Modified 1 x 2 with Bar Handle

Wedge, Plate 3 x 3 Cut Corner

×2

Plate, Modified 1 x 2 with Bar Handle on Side - Free Ends

×3

Plate, Round 2 x 2 with Rounded Bottom (Boat Stud)

Technic, Pin with Short Friction Ridges

×19

Plate, Modified 2 x 2 with Pin Holes

×2

Brick 2 x 4

Brick 2 x 3

Brick 1 x 2

×4

Plate 2 x 4

×7

Plate 2 x 4

Plate 2 x 3

×3

Plate 2 x 2

×3

Plate 1 x 2

×13

Plate 4 x 4

×2

Slope 45 2 x 4

Brick, Modified 1 x 4 with Studs on Side

×2

Wedge, Plate 4 x 4 Cut Corner

×2

Hinge Cylinder 1 x 2 Locking with 1 Finger and Axle Hole on Ends with Slots

×3

Technic, Brick 1 x 2 with Holes

×9

Technic, Brick 1 x 2 with Holes

×4

Technic, Plate 2 x 6 with 5 Holes

Technic, Axle and Pin Connector Angled #1

×4

Technic, Axle and Pin Connector Angled #3 - 157.5 degrees

×4

Plate, Modified 1 x 2 with Door Rail

Technic, Pin 3L with Friction Ridges and Stop Bush

×2

Technic, Axle 2L Notched

×2

Technic, Axle 5L

Technic, Axle and Pin Connector Angled #4 - 135 degrees

×2

Technic, Gear 12 Tooth Double Bevel

Technic, Liftarm Thick 1 x 3

×2

Technic, Liftarm Thick 1 x 7

×2

Technic, Liftarm, Modified Bent Thick L-Shape 3 x 5

×2

Technic, Pin Connector Plate 1 x 2 x 1 2/3 with 2 Holes on Top

×2

Technic, Brick 4 x 6 Open Center

Slope, Curved 2 x 2 x 2/3 Inverted

Slope 33 3 x 4

×2

Tile, Modified 2 x 2 with Studs on Edge

Plate 1 x 3

×2

Plate 1 x 6

×2

Technic, Pin without Friction Ridges

×3

Bracket 1 x 1 - 1 x 1

×2

Technic, Brick 1 x 2 with Hole

×2

Technic, Axle 4L

Technic, Plate 2 x 4 with 3 Holes

×2

Plate 1 x 4

×3

Slope, Inverted 33 3 x 2 with Flat Bottom Pin and Connections between Studs

Plate 2 x 6

×3

Plate 2 x 10

Plate, Modified 1 x 2 with Bar Handles - Flat Ends, Low Attachment

Brick, Round 2 x 2 with Axle Hole

Plate, Round 2 x 2 with Axle Hole

×2

Plate, Round 1 x 1

×19

Plate, Round 1 x 1

×5

Technic Circular Saw Blade with Pin Hole and Six Teeth (Large Shuriken Throwing Star)

×2

Minifigure, Weapon Naginata with Marbled Trans-Light Blue Pattern

Wheel 11mm D. x 8mm with Center Groove, 4 Spokes

×2

Technic Bush 1/2 Smooth

×6

Technic, Axle 1L with Pin with Friction Ridges

×10

Wedge 4 x 2 Triple Left

Wedge 4 x 2 Triple Right

Wedge, Plate 4 x 4

×2

Wedge, Plate 3 x 2 Right

×2

Wedge, Plate 3 x 2 Left

×2

Flag 2 x 2 Trapezoid

×2

Bracket 1 x 2 - 2 x 2

×2

Technic, Axle 3L

×3

Wedge 16 x 4 Triple Curved with Reinforcements

Cone 1 x 1 with Top Groove

×3

Wedge, Plate 12 x 3 Left

Wedge, Plate 12 x 3 Right

Cone 4 x 4 x 2 Hollow No Studs

Wedge, Plate 3 x 4 with Stud Notches

Plate, Modified 1 x 2 with Bar Handle on Side - Closed Ends

×2

Slope, Inverted 45 4 x 2 Double with 2 x 2 Cutout

Tornado of Spinjitzu Narrow with Molded Glitter Trans-Neon Green Top Pattern

Wedge 10 x 3 Left

Wedge 10 x 3 Right

Wedge, Plate 2 x 4

×2

Slope 30 1 x 1 x 2/3

×3

Wedge, Plate 6 x 3 Right

Wedge, Plate 6 x 3 Left

Technic, Axle 8L with Stop

×3

Wheel 18mm D. x 14mm with Axle Hole, Fake Bolts and Shallow Spokes

×2

Technic, Axle Connector Hub with 3 Axles

Hinge Plate 3 x 12 with Angled Side Extensions and Tapered Ends

×2

Tire 14mm D. x 4mm Smooth Small Single with Number Embossed on Side

×3

Plate, Modified 1 x 2 with 2 Open O Clips (Horizontal Grip)

×2

Hinge Plate 1 x 2 Locking with 2 Fingers on Side

Plate, Round 4 x 4 with Hole

Technic, Liftarm, Modified T-Shape Thick 3 x 3

×2

Technic, Liftarm, Modified T-Shape Thick 3 x 3

×2

Bionicle Wing Small / Tail with Axle Hole

×3

Technic, Pin Connector Round 2L with Slot (Pin Joiner Round)

×2

Technic, Universal Joint 3L

Minifigure, Utensil Telescope

×2

Technic, Axle Connector 2L (Smooth with x Hole + Orientation)

×3

Technic, Axle Connector 2L (Smooth with x Hole + Orientation)

Technic, Brick 1 x 1 with Hole

×4

Technic, Pin 3L with Friction Ridges

×2

Technic, Gear 12 Tooth Bevel

Sticker Sheet for Set 70673 - (57898/6268352)

Slope, Inverted 45 4 x 4 Double with 2 Holes

Slope, Curved 10 x 1

×2

Slope 30 1 x 2 x 2/3

×6

Tile 2 x 4

Plate, Modified 1 x 2 with Clip with Center Cut on Top

×2

Slope 45 2 x 1 with 2/3 Cutout

×2

Panel 1 x 2 x 1 with Rounded Corners and Center Divider

Bracket 1 x 2 - 2 x 4

×2

Cone 2 x 2 Truncated

×2

Propeller 1 Blade 16L with Axle (Sword Blade)

×3

Arm Mechanical, Exo-Force / Bionicle, Thick Support

×3

Ring 4 x 4 with 2 x 2 Hole and 4 Arrow Ends (Ninjago Spinner Crown)

Minifigure, Utensil Cleaver

×3

Plate, Modified 2 x 2 x 2/3 with 2 Studs on Side

×2

Bracket 1 x 2 - 2 x 2 Inverted

×4

Minifigure, Utensil Ingot 1 x 2

×2

Bracket 1 x 2 - 1 x 2 Inverted

×2

Plastic Sheet for Sets 70673, 70674, 70675, 70676, 70677, 70678 and 70684 - (55637/6266962)

Shuricopter

About Shuricopter

Part-out value

Seller notes

Minifigures in Shuricopter (3)

Parts (151)

Common questions about Shuricopter

How much is LEGO Shuricopter (70673-1) worth?

What minifigures come in LEGO set 70673-1?

Is it worth parting out LEGO Shuricopter?

Is LEGO Shuricopter (70673-1) retired?

How do I check if my Shuricopter set is complete?

More Ninjago sets

Explore more

Company

Legal