How much is LEGO Fire Fang (70674-1) worth?

Fire Fang sells for an average of $49.66 used and $109.60 new/sealed on BrickLink based on 6 months of completed sales. As a retired set, prices tend to hold steady or appreciate over time, especially for complete sets with original packaging. Actual prices vary with completeness. Missing minifigures or key parts will lower the value.

What minifigures come in LEGO set 70674-1?

This set includes 4 minifigures: Pyro Destroyer ($3.31), Kai FS ($3.60), Aspheera ($12.16), Pyro Slayer with Neck Bracket ($3.46). The minifigures have a combined BrickLink value of $22.53. Each figure is linked above with individual pricing if you're looking to buy or sell specific characters.

Is it worth parting out LEGO Fire Fang?

The minifigures make up about 45% of the set value ($22.53 out of $49.66). Most of the value is in the complete set package, so selling it whole is likely the better move unless you have buyers lined up for specific figures.

Is LEGO Fire Fang (70674-1) retired?

Yes, Fire Fang was released in 2019 and has been retired from retail for several years. Retired LEGO sets are only available on the secondary market through BrickLink, eBay, or other resale platforms.

How do I check if my Fire Fang set is complete?

Use the parts list on this page to check every piece and all 4 minifigures. For the minifigures specifically, you can use the brick'em scanner to identify each figure from a photo and confirm it matches what should be in this set. Missing pieces can be individually sourced on BrickLink.

Fire Fang

70674-1·Ninjago·2019·4 minifigs·166 parts

Used Avg

$49.66

New Avg

$109.60

Add to your inventory Scan the minifigs

About Fire Fang

Fire Fang (70674-1) is a LEGO Ninjago set released in 2019, currently averaging $49.66 used on BrickLink. It comes with 4 minifigures worth a combined $22.53. The set has retired from retail, so secondary market is the only option. The full parts inventory runs 166 pieces.

Part-out value

Parts (166)

Minifigure, Weapon Sword, Elven Warrior Blade with Long Hilt

×2

Brick, Modified 1 x 2 with Studs on 1 Side

×7

Technic, Axle 1L with Pin 2L with Friction Ridges

×4

Slope, Curved 2 x 1 x 2/3

×4

Plate, Modified 1 x 2 with Tow Ball on Side

×4

Slope, Curved 2 x 2 x 2/3

×3

Tile, Modified 1 x 2 with 2 Teeth Vertical

×3

Projectile Launcher Part, Trigger for Gun, Mini Blaster / Shooter

×3

Projectile Launcher, 1 x 2 Mini Blaster / Shooter

×2

Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)

×2

Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)

×4

Tile, Modified 1 x 1 with Open O Clip

×2

Minifigure, Weapon Sword, Shamshir / Katana (Square Guard) with Capped Pommel and Holes in Crossguard and Blade

×2

Minifigure, Weapon Sword, Shamshir / Katana (Square Guard) with Capped Pommel and Holes in Crossguard and Blade

×5

Slope 45 1 x 1 x 2/3 Quadruple Convex Pyramid

×3

Plate, Modified 1 x 2 with Tow Ball on End

×4

Bar Holder with Handle

×6

Plate 2 x 2 Corner

×2

Plate 2 x 2 Corner

×2

Plate 2 x 2 Corner

×2

Tile 1 x 4

Brick 2 x 6

Tile, Round 1 x 1 Quarter

×5

Plate, Round 2 x 2 with Rounded Bottom (Boat Stud)

Brick, Modified 1 x 1 with Studs on 2 Sides, Adjacent

×8

Plate, Modified 1 x 2 with 3 Claws / Rock Fingers

Tile, Round Corner 4 x 4 Macaroni

×2

Technic, Pin with Short Friction Ridges

×2

Minifigure Neck Bracket with Back Stud - Thick Back Wall

Wedge 2 x 1 x 2/3 Right

×5

Wedge 2 x 1 x 2/3 Left

×5

Brick 2 x 3

Brick 2 x 2

Brick 1 x 2

Chain 21 Links (16-17L)

×2

Rock 1 x 1 Jewel 24 Facet

×2

Plate 2 x 4

×2

Plate 2 x 4

×2

Plate 2 x 4

×4

Plate 2 x 3

×3

Plate 2 x 3

×2

Plate 2 x 2

×3

Plate 2 x 2

×3

Plate 2 x 2

Plate 1 x 2

×3

Plate 1 x 2

×13

Brick, Modified 1 x 2 with Bar Handle on Side

×4

Brick, Modified 1 x 2 with Open O Clip Thick (Vertical Grip)

Plate 1 x 1

×6

Plate 4 x 10

Plate 4 x 4

×2

Plate 4 x 6

×2

Plate 4 x 6

Plate 4 x 8

Hinge Brick 1 x 2 Locking with 1 Finger Vertical End

×2

Hinge Brick 1 x 2 Locking with 2 Fingers Vertical End

×2

Bar 4L (Lightsaber Blade / Wand)

Hinge Plate 1 x 2 Locking with 1 Finger on Top

×2

Hinge Brick 1 x 2 Locking with 1 Finger Vertical End and 2 Fingers Vertical End

×2

Brick, Modified 1 x 4 with Studs on Side

×6

Tile 1 x 2

×4

Tile 1 x 2

Plate, Modified 2 x 3 with Hole

Technic, Brick 1 x 2 with Holes

×5

Plate, Modified 1 x 2 with Door Rail

Technic, Steering Arm with Pins

Technic, Plate 1 x 5 with Smooth Ends, 4 Studs and Center Axle Hole

×2

Technic, Axle and Pin Connector Angled #4 - 135 degrees

×2

Technic, Gear 12 Tooth Double Bevel

Slope, Curved 2 x 2 x 2/3 Inverted

×3

Plate, Modified 4 x 4 with 3 x 3 Curved Cutout

×2

Plate, Round 1 x 2 with Open Studs

×2

Plate 1 x 3

×8

Hinge Plate 2 x 4 with Articulated Joint - Male

×2

Hinge Plate 2 x 4 with Articulated Joint - Female

×2

Slope, Inverted 45 2 x 2 with Flat Bottom Pin

×4

Slope, Inverted 45 2 x 1

×6

Slope, Inverted 45 2 x 1

×2

Technic, Brick 1 x 2 with Hole

Plate 1 x 4

×2

Plate 1 x 4

×2

Plate 1 x 4

Plate 2 x 6

Antenna 4H - Flat Top

×2

Plate, Round 1 x 1

×3

Plate, Round 1 x 1

×5

Plate, Modified 1 x 1 with Open O Clip Thick (Vertical Grip)

×4

Plate, Modified 1 x 1 with Open O Clip Thick (Vertical Grip)

×2

Minifigure, Weapon Naginata with Marbled Trans-Orange Pattern

Plate, Modified 1 x 4 with 2 Studs with Groove

×4

Plate, Modified 1 x 4 with 2 Studs with Groove

×3

Wedge, Plate 4 x 2 Right

Wedge, Plate 4 x 2 Left

Technic Bush 1/2 Smooth

×2

Technic, Pin 1/2 without Friction Ridges

×2

Wedge, Plate 4 x 4

Dish 3 x 3 Inverted (Radar)

×4

Hinge Plate 1 x 2 Locking with 2 Fingers on End

×2

Flag 2 x 2 Trapezoid

×8

Bracket 1 x 2 - 2 x 2

×2

Cone 1 x 1 with Top Groove

×2

Dish 2 x 2 Inverted (Radar)

×2

Plate, Modified 1 x 2 with Bar Handle on Side - Closed Ends

Panel 1 x 2 x 1 with Rounded Corners

×2

Slope, Inverted 45 4 x 2 Double with 2 x 2 Cutout

Bar 1L with Clip Mechanical Claw - Cut Edges and Hole on Side

×5

Bar 1L with Clip Mechanical Claw - Cut Edges and Hole on Side

×3

Plate, Modified 1 x 1 with Tooth Horizontal

×8

Tornado of Spinjitzu Narrow with Molded Glitter Trans-Orange Top Pattern

Slope, Curved 3 x 1

×2

Wedge, Plate 2 x 4

×2

Barb / Claw / Horn / Tooth - Small

×3

Barb / Claw / Horn / Tooth - Small

×2

Barb / Claw / Horn / Tooth - Small

×9

Slope 30 1 x 1 x 2/3

×13

Slope 30 1 x 1 x 2/3

×17

Slope 30 1 x 1 x 2/3

×3

Slope 30 1 x 1 x 2/3

×10

Technic, Brick Modified 2 x 2 with Ball Joint and Axle Hole with 6 Holes in Ball

Plate, Round 4 x 4 with Hole

Brick, Modified 1 x 1 with Clip (Horizontal Grip)

×2

Plate, Modified 1 x 2 with Bar Handle on End

×2

Slope 18 2 x 1 x 2/3 with Grille

×2

Plate, Modified 1 x 2 with Clip on End (Horizontal Grip)

×2

Plate, Modified 1 x 2 with Clip on End (Horizontal Grip)

×2

Plate, Modified 1 x 2 with Clip on End (Horizontal Grip)

×2

Bar 6L with Stop Ring

×2

Bar 6L with Stop Ring

Minifigure, Weapon Lightsaber Hilt Straight

×3

Minifigure, Weapon Lightsaber Hilt Straight

×2

Wedge 4 x 4 Fractured Polygon Top

×5

Plastic Sheet for Set 70674 - (58012/6268528)

Sticker Sheet for Set 70674 - (57922/6268356)

Slope, Inverted 45 4 x 4 Double with 2 Holes

×2

Plate, Round 1 x 1 with Open Stud

×2

Technic, Axle 4L with Stop

Brick, Modified 1 x 1 with Stud on Side

×4

Bar 5L with Handle (Friction Ram)

×2

Bar 3L (Bar Arrow)

×2

Slope, Curved 2 x 4 x 2/3 with Bottom Tubes

×3

Minifigure, Shield Circular / Round Rimmed Face with Stud

×2

Technic, Brick Modified 2 x 2 with Ball Socket and Axle Hole - Straight Forks with Round Ends and Open Sides

Plate, Modified 1 x 2 with Clip with Center Cut on Top

×10

Slope 45 2 x 1 with 2/3 Cutout

×2

Slope 45 2 x 1 with 2/3 Cutout

×10

Minifigure, Weapon Sword, Khopesh (Sickle Sword)

Slope, Curved 4 x 2

Tile, Round 1 x 1

×3

Tile, Round 1 x 1

×3

Brick, Modified 1 x 2 with Masonry Profile

Vehicle, Spoiler with Bar Handle

×4

Pneumatic Hose Connector with Axle Connector

Minifigure, Utensil Ingot 1 x 2

×3

Bracket 1 x 2 - 1 x 2 Inverted

×2

Bracket 1 x 2 - 1 x 2 Inverted

×2

Bracket 1 x 2 - 1 x 2 Inverted

×12

Bracket 1 x 2 - 1 x 2

Plastic Sheet for Sets 70673, 70674, 70675, 70676, 70677, 70678 and 70684 - (55637/6266962)

Fire Fang

About Fire Fang

Part-out value

Seller notes

Minifigures in Fire Fang (4)

Parts (166)

Common questions about Fire Fang

How much is LEGO Fire Fang (70674-1) worth?

What minifigures come in LEGO set 70674-1?

Is it worth parting out LEGO Fire Fang?

Is LEGO Fire Fang (70674-1) retired?

How do I check if my Fire Fang set is complete?

More Ninjago sets

Explore more

Company

Legal