How much is LEGO The Ultra Dragon (70679-1) worth?

The Ultra Dragon sells for an average of $135.19 used and $187.71 new/sealed on BrickLink based on 6 months of completed sales. As a retired set, prices tend to hold steady or appreciate over time, especially for complete sets with original packaging. Actual prices vary with completeness. Missing minifigures or key parts will lower the value.

What minifigures come in LEGO set 70679-1?

This set includes 6 minifigures: Lloyd - Legacy, Dark Green Sash ($3.51), Wu Sensei - Legacy, Black Robe ($2.42), Lasha - Legacy ($1.83), Spitta - Legacy ($3.44), plus 2 more. The minifigures have a combined BrickLink value of $30.29. Each figure is linked above with individual pricing if you're looking to buy or sell specific characters.

Is it worth parting out LEGO The Ultra Dragon?

The minifigures make up about 22% of the set value ($30.29 out of $135.19). Most of the value is in the complete set package, so selling it whole is likely the better move unless you have buyers lined up for specific figures.

Is LEGO The Ultra Dragon (70679-1) retired?

Yes, The Ultra Dragon was released in 2019 and has been retired from retail for several years. Retired LEGO sets are only available on the secondary market through BrickLink, eBay, or other resale platforms. At its current price point, it has appreciated since retirement.

How do I check if my The Ultra Dragon set is complete?

Use the parts list on this page to check every piece and all 6 minifigures. For the minifigures specifically, you can use the brick'em scanner to identify each figure from a photo and confirm it matches what should be in this set. Missing pieces can be individually sourced on BrickLink.

The Ultra Dragon

70679-1·Ninjago·2019·6 minifigs·243 parts

Used Avg

$135.19

New Avg

$187.71

Add to your inventory Scan the minifigs

About The Ultra Dragon

The Ultra Dragon (70679-1) is a LEGO Ninjago set released in 2019, currently averaging $135.19 used on BrickLink. It comes with 6 minifigures worth a combined $30.29. The set has retired from retail, so secondary market is the only option. The full parts inventory runs 243 pieces.

Parts (243)

Bar Holder with Clip

×6

Brick, Modified 1 x 2 with Studs on 1 Side

×4

Plate 3 x 3

×2

Technic, Axle 1L with Pin 2L with Friction Ridges

×4

Bracket 5 x 2 x 1 1/3 with 2 Holes and Bottom Tube

Plate, Modified 1 x 2 with Pin Hole on Top

×2

Slope, Curved 2 x 1 x 2/3

×2

Slope, Curved 2 x 1 x 2/3

×2

Slope, Curved 2 x 1 x 2/3

×2

Slope, Curved 4 x 1 Inverted

×4

Tile, Round 2 x 2 with Bottom Stud Holder

×2

Slope, Curved 2 x 2 x 2/3

×2

Slope, Curved 2 x 2 x 2/3

×2

Slope, Curved 2 x 2 x 2/3

×2

Slope, Curved 2 x 2 x 2/3

×4

Plate, Modified 1 x 1 with Tooth Vertical

×8

Plate, Modified 1 x 1 with Tooth Vertical

×2

Plate, Modified 2 x 2 with Pins on Bottom

×2

Plate, Modified 1 x 2 with 3 Teeth

×9

Plate, Modified 1 x 2 with 3 Teeth

Projectile Launcher, 1 x 4 Spring Shooter with Light Bluish Gray Top

×2

Projectile Arrow, Bar 8L with Round End (Spring Shooter Dart)

×3

Hero Factory Foot with Four Short Claws and Ball Joint Socket

×4

Projectile Launcher Part, Trigger for Gun, Mini Blaster / Shooter

×9

Projectile Launcher, 1 x 2 Mini Blaster / Shooter

×8

Technic, Steering Arm with 3 Tow Ball, Compact

×2

Slope 45 2 x 1 Triple with Bottom Stud Holder

Wedge, Plate A-Shape with 2 Rows of 4 Studs

×4

Wedge, Plate A-Shape with 2 Rows of 4 Studs

×6

Tile, Modified 1 x 1 with Open O Clip

×2

Barb / Claw / Horn / Tooth with Clip, Curved

×6

Technic, Liftarm Thick 1 x 1 (Spacer)

×3

Tile, Round 1 x 1 with Bar and Small Pin Hole

×5

Minifigure, Weapon Sword, Shamshir / Katana (Square Guard) with Capped Pommel and Holes in Crossguard and Blade

×5

Minifigure, Weapon Sword, Shamshir / Katana (Square Guard) with Capped Pommel and Holes in Crossguard and Blade

×6

Tile, Modified 2 x 3 Pentagonal

Slope 45 1 x 1 x 2/3 Quadruple Convex Pyramid

×3

Slope, Inverted 45 6 x 2 Double with 2 x 4 Cutout

Minifigure, Weapon Sword, Blade with Bar End

×2

Wedge, Plate 3 x 6 Cut Corners

Wedge, Plate 2 x 2 Left

×2

Wedge, Plate 2 x 2 Right

×2

Slope, Curved 3 x 2

Technic, Axle 3L with Stop

Plate 2 x 12

Minifigure, Weapon Spear Tip with Fins

×4

Minifigure, Weapon Spear Tip with Fins

×2

Tile, Round 1 x 1 Quarter

×34

Plate, Modified 1 x 2 with Bar Handle on Side - Free Ends

×2

Plate, Round 1 x 1 with Bar Handle

×14

Plate, Round 2 x 2 with Rounded Bottom (Boat Stud)

Plate, Modified 2 x 4 with Pin Holes

Wedge, Plate 2 x 2 Cut Corner

×2

Wave Angular Single with Bar End (Lightning Bolt)

×4

Plate, Modified 1 x 2 with 3 Claws / Rock Fingers

×21

Plate, Modified 1 x 2 with 3 Claws / Rock Fingers

×2

Plate, Modified 1 x 2 with 3 Claws / Rock Fingers

×2

Tile, Modified Facet 2 x 2

×2

Technic, Brick 1 x 10 with Holes

×2

Technic, Axle 1L with Tow Ball

×2

Technic, Link 1 x 6 without Stoppers

×2

Technic, Pin with Short Friction Ridges

×22

Vehicle, Mudguard 4 x 3 x 1 with Arch Curved

Snake Head with Open Mouth, Fangs and Curved Neck with Bar

×4

Wedge 2 x 1 x 2/3 Right

×6

Wedge 2 x 1 x 2/3 Left

×6

Brick 2 x 2

×2

Brick 2 x 2 with Metallic Light Blue Dragon Eye Pattern on Two Sides

×2

Brick 2 x 2 with Gold Dragon Eye Pattern on Two Sides

×2

Brick, Modified 1 x 2 with Log Profile

Plate 2 x 4

×8

Plate 2 x 4

×6

Plate 2 x 3

×8

Plate 2 x 3

×4

Plate 2 x 2

×22

Plate 2 x 2

×6

Plate 2 x 2

×4

Plate 1 x 2

×11

Plate 1 x 2

×9

Plate 1 x 2

×5

Plate 1 x 1

×3

Plate 4 x 6

Plate 2 x 8

Plate 4 x 8

×2

Arm Mechanical, Battle Droid

×2

Slope 45 2 x 1

×2

Slope 45 2 x 1

×2

Hinge Plate 1 x 8 with Angled Side Extensions

×5

Brick, Modified 1 x 4 with Studs on Side

×5

Slope 45 2 x 1 Double / Inverted with Bottom Stud Holder

×2

Hinge Cylinder 1 x 2 Locking with 2 Fingers and Axle Hole on Ends with Slots

×3

Hinge Cylinder 1 x 2 Locking with 2 Fingers and Axle Hole on Ends with Slots

Plate, Round Corner 4 x 4

×4

Plate, Round Corner 4 x 4

×2

Tile 2 x 2

×4

Tile 1 x 2

×2

Tile 1 x 1

×3

Plate, Modified 2 x 3 with Hole

×2

Plate, Modified 2 x 3 with Hole

×4

Technic, Brick 1 x 2 with Holes

×6

Technic, Liftarm, Modified Bent Thick 1 x 11.5 Double

×2

Technic, Axle and Pin Connector Angled #1

×6

Technic, Axle and Pin Connector Angled #5 - 112.5 degrees

×12

Technic, Axle Connector with Axle Hole

×2

Technic, Axle 2L Notched

×4

Technic, Brick 1 x 2 with Axle Hole

×2

Technic, Brick 1 x 2 with Axle Hole

×2

Technic, Axle and Pin Connector Angled #4 - 135 degrees

×2

Technic, Axle 5.5L with Stop

×2

Technic, Gear 12 Tooth Double Bevel

Technic, Liftarm, Modified Bent Thick 1 x 9 (7 - 3)

×2

Technic, Brick 4 x 4 Open Center

×2

Technic, Liftarm, Modified Bent Thick 1 x 7 (4 - 4)

×2

Technic, Liftarm Thick 1 x 3

×2

Technic, Liftarm, Modified Bent Thick L-Shape 3 x 5

×2

Technic, Brick 5 x 5 Right Angle (1 x 4 - 1 x 4)

×2

Slope, Curved 2 x 2 x 2/3 Inverted

×8

Plate 1 x 8

Plate, Modified 4 x 4 with 3 x 3 Curved Cutout

×4

Plate, Round 1 x 2 with Open Studs

×2

Plate 1 x 3

×2

Plate 1 x 3

×2

Hinge Plate 2 x 4 with Articulated Joint - Male

Hinge Plate 2 x 4 with Articulated Joint - Female

Slope 65 2 x 2 x 2 with Bottom Tube

Bracket 1 x 1 - 1 x 1

×2

Technic, Brick 1 x 2 with Hole

×2

Technic, Brick 1 x 4 with Holes

×8

Technic, Brick 1 x 8 with Holes

×2

Technic, Axle 4L

×2

Technic, Axle 6L

×6

Plate 1 x 4

×4

Technic Bush

×3

Technic, Axle 10L

×2

Plate 2 x 6

×4

Technic, Brick 1 x 6 with Holes

×2

Hinge Brick 1 x 2 Base

×2

Hinge Brick 1 x 2 Base

×4

Plate, Round 2 x 2 with Axle Hole

×8

Plate, Round 1 x 1

×5

Plate, Round 1 x 1

×5

Plate, Round 1 x 1

×5

Plate, Round 1 x 1

×5

Plate, Round 1 x 1

×9

Plate, Round 1 x 1

×2

Minifigure, Utensil Seat / Chair 2 x 2

Plate, Modified 1 x 1 with Light Attachment - Thick Ring

×6

Plate, Modified 1 x 1 with Light Attachment - Thick Ring

×2

Tile 1 x 8

×2

Technic, Liftarm Thin 1 x 2 - Axle Holes

×4

Wedge, Plate 4 x 2 Right

Wedge, Plate 4 x 2 Left

Technic Bush 1/2 Smooth

×3

Technic, Pin 1/2 without Friction Ridges

×15

Slope 33 3 x 1

×2

Slope, Inverted 33 3 x 1

×2

Technic, Axle 1L with Pin with Friction Ridges

×10

Wedge, Plate 3 x 2 Right

Wedge, Plate 3 x 2 Left

Hinge Plate 1 x 2 Locking with 1 Finger on End without Bottom Groove

×8

Hinge Plate 1 x 2 Locking with 2 Fingers on End

×8

Bracket 1 x 2 - 2 x 2

×8

Bracket 1 x 2 - 2 x 2

×2

Bracket 1 x 2 - 2 x 2

×2

Bracket 1 x 2 - 2 x 2

×2

Bracket 1 x 2 - 2 x 2

×2

Technic, Axle 3L

×2

Slope, Curved 3 x 2 x 2/3 with 2 Studs, Wing End

×4

Slope, Curved 2 x 2 x 2/3 with 2 Studs and Curved Sides

×2

Slope, Curved 2 x 2 x 2/3 with 2 Studs and Curved Sides

×5

Slope, Curved 1 x 2 x 2/3 Wing End

×2

Wedge 4 x 3 Open with Cutout and 4 Studs

×4

Wedge, Plate 3 x 4 with Stud Notches

×5

Plate, Modified 1 x 2 with Bar Handle on Side - Closed Ends

×2

Plate, Modified 1 x 2 with Bar Handle on Side - Closed Ends

×4

Plate, Modified 1 x 1 with Tooth Horizontal

×2

Plate, Modified 1 x 1 with Tooth Horizontal

×2

Barb / Claw / Horn / Tooth - Small

×7

Slope 30 1 x 1 x 2/3

×12

Slope 30 1 x 1 x 2/3

×3

Technic, Axle Connector Hub with 3 Axles

×2

Technic, Brick Modified 2 x 2 with Ball Joint and Axle Hole with 6 Holes in Ball

×8

Plate, Modified 1 x 2 with 2 Open O Clips (Horizontal Grip)

Plate, Modified 1 x 2 with Bar Handle on End

×2

Technic, Axle 9L

×2

Minifigure, Weapon Sword, Scimitar with Nicks

Hinge Brick 2 x 2 Top Plate

×2

Hinge Brick 2 x 2 Top Plate

×4

Slope, Curved 4 x 1

×2

Technic, Pin Connector Round 2L with Slot (Pin Joiner Round)

×22

Plate, Modified 2 x 16 with Angled Side Extensions and Axle Hole (Rotor Blade)

Plate, Modified 1 x 2 with Clip on End (Horizontal Grip)

×8

Bar 6L with Stop Ring

Minifigure, Weapon Lightsaber Hilt Straight

×2

Minifigure, Weapon Lightsaber Hilt Straight

×5

Minifigure, Plume Feather Triple Compact / Flame / Water with Small Pin

×3

Wedge 4 x 4 Fractured Polygon Top

×19

Technic, Axle Connector 2L (Smooth with x Hole + Orientation)

×4

Technic, Pin 3L with Friction Ridges

×10

Technic, Pin with Friction Ridges and Tow Ball with Round Pin Hole

×12

Plastic Sheet for Set 70679 - (49452/6253258)

Sticker Sheet for Set 70679 - (46482/6249752)

Slope 30 1 x 2 x 2/3

×5

Tile 2 x 4

Technic, Axle 4L with Stop

Brick, Modified 1 x 1 with Stud on Side

×8

Brick, Modified 1 x 1 with Stud on Side

×4

Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper)

×4

Barb / Claw / Horn / Tooth - Medium

×2

Horn, Unicorn / Spiral

×3

Technic, Brick Modified 2 x 2 with Ball Socket and Axle Hole - Straight Forks with Round Ends and Open Sides

×4

Plate, Modified 1 x 2 with Clip with Center Cut on Top

×2

Chain 5 Links

×2

Hinge Plate 2 x 2 Locking with 1 Finger on Top

×8

Hinge Plate 2 x 2 Locking with 1 Finger on Top

Plate, Modified 1 x 2 with Angled Bar Handles on Side

Slope 45 2 x 1 with 2/3 Cutout

×4

Arch 1 x 6 Raised Arch

Bone, Short

Slope, Curved 4 x 1 x 2/3 Double

Minifigure, Weapon Pike / Spear - Handle with Flat End

Brick, Round Corner 6 x 6 with Slope 33 Edge, Facet Cutout

×2

Brick and Axle Separator

Tile, Round 1 x 1

×2

Brick, Modified 1 x 2 with Masonry Profile

×2

Arm Mechanical, Exo-Force / Bionicle, Thick Support

×2

Arm Mechanical, Exo-Force / Bionicle, Thick Support

×6

Minifigure, Utensil Handlebars with Angular Handles

Pneumatic Hose Connector with Axle Connector

Plate, Modified 2 x 2 x 2/3 with 2 Studs on Side

×2

Bracket 1 x 2 - 2 x 2 Inverted

×2

Minifigure, Utensil Ingot 1 x 2

×6

Bracket 1 x 2 - 1 x 2 Inverted

×4

Bracket 1 x 2 - 1 x 2 Inverted

×4

Bracket 1 x 2 - 1 x 2 Inverted

×4

Bracket 1 x 2 - 1 x 2 Inverted

×2

Bracket 1 x 2 - 1 x 2

×8

Bracket 1 x 2 - 1 x 2

×24

The Ultra Dragon

About The Ultra Dragon

Part-out value

Seller notes

Minifigures in The Ultra Dragon (6)

Parts (243)

Common questions about The Ultra Dragon

How much is LEGO The Ultra Dragon (70679-1) worth?

What minifigures come in LEGO set 70679-1?

Is it worth parting out LEGO The Ultra Dragon?

Is LEGO The Ultra Dragon (70679-1) retired?

How do I check if my The Ultra Dragon set is complete?

More Ninjago sets

Explore more

Company

Legal