How much is LEGO Jungle Dragon (71746-1) worth?

Jungle Dragon sells for an average of $38.29 used and $57.88 new/sealed on BrickLink based on 6 months of completed sales. As a retired set, prices tend to hold steady or appreciate over time, especially for complete sets with original packaging. Actual prices vary with completeness. Missing minifigures or key parts will lower the value.

What minifigures come in LEGO set 71746-1?

This set includes 4 minifigures: Lloyd - The Island, Mask and Hair with Bandana, Armor Shoulder Pad ($2.95), PoulErik ($3.06), Thunder Keeper ($3.20), Zane - The Island, Mask and Hair, Quiver ($3.74). The minifigures have a combined BrickLink value of $12.96. Each figure is linked above with individual pricing if you're looking to buy or sell specific characters.

Is it worth parting out LEGO Jungle Dragon?

The minifigures make up about 34% of the set value ($12.96 out of $38.29). Most of the value is in the complete set package, so selling it whole is likely the better move unless you have buyers lined up for specific figures.

Is LEGO Jungle Dragon (71746-1) retired?

Yes, Jungle Dragon was released in 2021 and has been retired from retail for several years. Retired LEGO sets are only available on the secondary market through BrickLink, eBay, or other resale platforms.

How do I check if my Jungle Dragon set is complete?

Use the parts list on this page to check every piece and all 4 minifigures. For the minifigures specifically, you can use the brick'em scanner to identify each figure from a photo and confirm it matches what should be in this set. Missing pieces can be individually sourced on BrickLink.

Jungle Dragon

71746-1·Ninjago·2021·4 minifigs·160 parts

Used Avg

$38.29

New Avg

$57.88

Add to your inventory Scan the minifigs

About Jungle Dragon

Jungle Dragon (71746-1) is a LEGO Ninjago set released in 2021, currently averaging $38.29 used on BrickLink. It comes with 4 minifigures worth a combined $12.96. The set has retired from retail, so secondary market is the only option. The full parts inventory runs 160 pieces.

Part-out value

Parts (160)

Slope, Curved 2 x 1 x 2/3

×8

Wedge 2 x 2 (Slope 45 Corner)

×2

Plate, Modified 1 x 2 with Small Tow Ball Socket on Side

×6

Tile, Round 2 x 2 with Bottom Stud Holder with Black Shuriken Throwing Star Pattern

Appendage Bony Small with Bar End (Leg / Rib / Tail)

×2

Slope, Curved 2 x 2 x 2/3

×10

Plate, Modified 1 x 1 with Tooth Vertical

×2

Projectile Launcher Part, Trigger for Gun, Mini Blaster / Shooter

×3

Projectile Launcher, 1 x 2 Mini Blaster / Shooter

×2

Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)

Minifigure Bandana Ninja

Wedge, Plate A-Shape with 2 Rows of 4 Studs

×4

Tile, Modified 1 x 1 with Open O Clip

×2

Barb / Claw / Horn / Tooth with Clip, Curved

Technic, Brick Modified 2 x 2 with 2 Ball Joints and Axle Hole

Technic, Liftarm Thick 1 x 1 (Spacer)

×3

Tile, Round 2 x 2 with Open Stud

×2

Minifigure, Weapon Sword, Shamshir / Katana (Square Guard) with Capped Pommel and Holes in Crossguard and Blade

×2

Minifigure, Weapon Sword, Shamshir / Katana (Square Guard) with Capped Pommel and Holes in Crossguard and Blade

×2

Tile, Modified 2 x 3 Pentagonal

×10

Plate, Modified 1 x 2 with Tow Ball on End

×4

Tile, Modified 1 x 2 Grille with Bottom Groove

Wedge, Plate 3 x 6 Cut Corners

Wedge, Plate 2 x 2 Left

×2

Wedge, Plate 2 x 2 Right

×2

Technic, Axle 3L with Stop

×5

Tile, Round 1 x 1 Quarter

×25

Tile, Round 1 x 1 Quarter

×3

Chain with Tassel

Plate, Round 2 x 2 with Rounded Bottom (Boat Stud)

Wedge, Plate 2 x 2 Cut Corner

×4

Wedge, Plate 2 x 2 Cut Corner

×2

Brick, Modified 1 x 1 with Studs on 2 Sides, Adjacent

×2

Plate, Modified 1 x 2 with 3 Claws / Rock Fingers

×2

Technic, Axle 1L with Tow Ball

×2

Tile, Round Corner 2 x 2 Macaroni

×2

Minifigure, Weapon Machete

×2

Wedge 2 x 1 x 2/3 Right

×2

Wedge 2 x 1 x 2/3 Right

×2

Wedge 2 x 1 x 2/3 Left

×2

Wedge 2 x 1 x 2/3 Left

×2

Brick 2 x 2

×2

Brick 1 x 1

×2

Plate 2 x 4

×4

Plate 2 x 4

×2

Plate 2 x 3

×5

Plate 2 x 2

×5

Plate 2 x 2

×3

Plate 1 x 2

×8

Plate 1 x 2

×3

Plate 1 x 2

Plate 2 x 8

Plate, Round Corner 3 x 3

×4

Bar 4L (Lightsaber Blade / Wand)

×2

Arm Mechanical, Battle Droid

×3

Plate, Modified 2 x 3 with Hole

×7

Plate, Modified 2 x 3 with Hole

×10

Technic, Axle and Pin Connector Angled #3 - 157.5 degrees

×2

Technic, Axle 2L Notched

×6

Technic, Plate 1 x 5 with Smooth Ends, 4 Studs and Center Axle Hole

×2

Technic, Axle and Pin Connector Angled #4 - 135 degrees

×2

Slope, Curved 2 x 2 x 2/3 Inverted

Bar 1L with 1 x 1 Round Plate with Hollow Stud

×3

Tile, Modified 2 x 2 with Studs on Edge

Plate, Modified 4 x 4 with 3 x 3 Curved Cutout

×2

Plate, Round 1 x 2 with Open Studs

×3

Minifigure, Weapon Sword Hilt with Dragon Head

Plate 1 x 6

Bracket 1 x 1 - 1 x 1 Inverted

×8

Bracket 1 x 1 - 1 x 1

×8

Plate 1 x 4

×2

Technic Bush

×6

Plate 2 x 6

×3

Plate 2 x 6

Plate, Round 2 x 2 with Axle Hole

×2

Plate, Round 1 x 1

×5

Plate, Round 1 x 1

×2

Plate, Modified 1 x 1 with Light Attachment - Thick Ring

×2

Plate, Modified 1 x 1 with Open O Clip Thick (Vertical Grip)

Technic, Liftarm Thin 1 x 2 - Axle Holes

×2

Wedge, Plate 4 x 2 Right

Wedge, Plate 4 x 2 Left

Technic Bush 1/2 Smooth

×6

Technic, Pin 1/2 without Friction Ridges

×5

Wedge, Plate 4 x 4

Wedge, Plate 3 x 2 Right

×8

Wedge, Plate 3 x 2 Left

×8

Dish 3 x 3 Inverted (Radar)

×2

Flag 2 x 2 Trapezoid

×2

Bracket 1 x 2 - 2 x 2

×4

Minifigure, Weapon Bow, Longbow with Arrow Drawn

Technic, Axle 3L

×2

Cone 1 x 1 with Top Groove

×6

Pneumatic T Piece Second Version (T Bar with Ball in Center)

×2

Dish 2 x 2 Inverted (Radar)

×2

Technic Rotation Joint Ball Loop with 2 Perpendicular Pins with Friction

×4

Slope, Curved 2 x 2 x 2/3 with 2 Studs and Curved Sides

×4

Technic, Brick Modified 2 x 2 with Pin Hole and Rotation Joint Ball Half Vertical

×4

Technic, Brick Modified 2 x 2 with Pin Hole and 2 Rotation Joint Sockets

×2

Slope, Inverted 45 4 x 2 Double with 2 x 2 Cutout

Plate, Modified 1 x 1 with Tooth Horizontal

×2

Plate, Modified 1 x 2 with Racers Car Grille

Slope, Curved 3 x 1

×2

Plate, Round 1 x 1 with Binoculars (Robot / Droid Head)

Barb / Claw / Horn / Tooth - Small

×13

Slope 30 1 x 1 x 2/3

×5

Wedge, Plate 6 x 3 Right

Wedge, Plate 6 x 3 Left

Plate, Modified 1 x 2 with 2 Open O Clips (Horizontal Grip)

×2

Plate, Modified 1 x 1 with Open O Clip (Horizontal Grip)

×4

Plate, Modified 1 x 2 with Angular Extension with Molded Flexible Rubber Sand Green Tip Pattern

Plate, Modified 1 x 2 with Clip on End (Horizontal Grip)

×2

Plate, Modified 1 x 2 with Clip on End (Horizontal Grip)

×2

Plate, Modified 1 x 2 with Clip on End (Horizontal Grip)

×2

Bar 6L with Stop Ring

Technic, Axle 2L with Reverser Handle Axle Connector

×2

Technic, Liftarm Thin 1 x 3 - Axle Holes

×2

Ring 3 x 3 with Dragon Head with Molded Trans-Purple Flames Pattern (Ninjago Storm Amulet)

Sticker Sheet for Set 71746 - (71621/6321428)

Dragon Head (Ninjago) Jaw with 2 Bar Handles on Back with Molded White Teeth Pattern

Dragon Head (Ninjago) Jaw with 2 Bar Handles on Back with Bright Light Orange Eyes, Gold Tribal Tattoos, Black Scales, and White Teeth Pattern

Brick, Round Corner 2 x 2 Macaroni with Stud Notch and Reinforced Underside

×4

Plate, Round 1 x 1 with Open Stud

×11

Plate, Round 1 x 1 with Open Stud

×3

Slope 30 1 x 2 x 2/3

×5

Slope 30 1 x 2 x 2/3

×2

Slope 30 1 x 2 x 2/3

Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper)

×7

Barb / Claw / Horn / Tooth - Medium

×3

Technic, Brick Modified 2 x 2 with Ball Socket and Axle Hole - Straight Forks with Round Ends and Open Sides

Chain 5 Links

Bar 1L with Top Stud and 2 Side Studs (Connector Perpendicular)

×2

Bone, Long

Plate, Modified 1 x 2 with Angled Bar Handles on Side

×4

Slope, Curved 4 x 1 x 2/3 Double

×2

Technic, Axle Connector 2 x 3 with Ball Joint Socket - Closed Sides, Straight Forks with Open Axle Holes

Minifigure, Weapon Pike / Spear - Handle with Flat End

Propeller 1 Blade 10L with Bar (Sword Blade)

×6

Tile, Round 1 x 1

×2

Minifigure, Weapon Crescent Blade, Serrated with Bar

×3

Arm Mechanical, Exo-Force / Bionicle, Thick Support

×12

Bracket 1 x 2 - 2 x 2 Inverted

×4

Minifigure, Utensil Ingot 1 x 2

×12

Minifigure, Utensil Ingot 1 x 2

×3

Bracket 1 x 2 - 1 x 2 Inverted

×13

Bracket 1 x 2 - 1 x 2

×4

Bracket 1 x 2 - 1 x 2

×3

Bracket 1 x 2 - 1 x 2

×10

Jungle Dragon

About Jungle Dragon

Part-out value

Seller notes

Minifigures in Jungle Dragon (4)

Parts (160)

Common questions about Jungle Dragon

How much is LEGO Jungle Dragon (71746-1) worth?

What minifigures come in LEGO set 71746-1?

Is it worth parting out LEGO Jungle Dragon?

Is LEGO Jungle Dragon (71746-1) retired?

How do I check if my Jungle Dragon set is complete?

More Ninjago sets

Explore more

Company

Legal