About TIE Fighter - UCS
TIE Fighter - UCS (75095-1) is a LEGO Star Wars set released in 2015, currently averaging $226.23 used on BrickLink. It comes with 1 minifigure worth a combined $55.96. The set has retired from retail, so secondary market is the only option. The full parts inventory runs 181 pieces.
Part-out value
The minifigures account for about 25% of the set's value ($55.96 out of $226.23). The remaining value is in the parts and the set as a complete package. Selling complete will likely net more than parting out unless you have specific demand for the individual figures.
Seller notes
- Imperial TIE Fighter Pilot - Printed Arms ($55.96) is the most valuable minifig in this set. If you're buying this set secondhand, check that this figure is included — it's often the first one pulled by sellers who part out.
Minifigures in TIE Fighter - UCS (1)
Parts (181)
Plate, Modified 1 x 2 with Pin Hole on Top
Dark Bluish Gray×2
Plate, Modified 1 x 2 with Clip on Side (Horizontal Grip)
Light Bluish Gray
Slope, Curved 2 x 1 x 2/3
Light Bluish Gray×8
Plate, Round 4 x 4 with 2 x 2 Round Open Center
Trans-Red
Plate, Round 4 x 4 with 2 x 2 Round Open Center
Light Bluish Gray
Slope, Curved 4 x 1 Inverted
Black×2
Wedge 2 x 2 (Slope 45 Corner)
Light Bluish Gray×4
Tile 2 x 2 Corner
Red×4
Tile 2 x 2 Corner
Light Bluish Gray×6
Tile, Round 2 x 2 with Bottom Stud Holder with Black SW Tie Fighter Pattern
Light Bluish Gray×2
Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)
Black×24
Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)
Light Bluish Gray×34
Tile, Modified 1 x 1 with Open O Clip
Dark Bluish Gray×28
Tile, Modified 1 x 1 with Open O Clip
Light Bluish Gray×2
Plate, Modified 1 x 2 with Pin Hole on Bottom
Light Bluish Gray×2
Brick 2 x 2 Corner
Black×4
Tile, Modified 1 x 2 Grille with Bottom Groove
Light Bluish Gray×13
Tile, Modified 1 x 2 Grille with Bottom Groove
Flat Silver×4
Wedge, Plate 3 x 6 Cut Corners
Blue×4
Plate 2 x 2 Corner
Yellow×26
Plate 2 x 2 Corner
Dark Bluish Gray×72
Hinge Plate 1 x 4 Swivel (2429 / 2430)
Light Bluish Gray×8
Tile 1 x 4
Black×8
Tile 1 x 4
Light Bluish Gray×15
Bracket 1 x 2 - 1 x 4 with Rounded Corners
Light Bluish Gray×4
Plate 2 x 12
Light Bluish Gray×4
Wedge, Plate 3 x 3 Cut Corner
Light Bluish Gray×16
Plate, Round 2 x 2 with Rounded Bottom (Boat Stud)
Light Bluish Gray×2
Technic, Pin with Short Friction Ridges
Black×6
Plate, Modified 2 x 2 with Pin Holes
Black×2
Plate, Modified 2 x 2 with Pin Holes
Light Bluish Gray
Brick, Modified 2 x 2 with Pins and Axle Hole
Dark Bluish Gray
Brick 2 x 4
Black×2
Brick 2 x 2
Black
Brick 1 x 2
Green×6
Brick 1 x 2
Light Bluish Gray×4
Brick 1 x 1
Black×4
Brick 1 x 6
Light Bluish Gray×2
Brick 1 x 4
Red×2
Plate 2 x 4
Blue×12
Plate 2 x 4
Black×13
Plate 2 x 4
Light Bluish Gray×16
Plate 2 x 3
Black×5
Plate 2 x 3
Dark Bluish Gray×18
Plate 2 x 2
Green×4
Plate 2 x 2
Black×4
Plate 2 x 2
Light Bluish Gray×14
Plate 1 x 2
Red×54
Plate 1 x 2
Black×10
Plate 1 x 2
Light Bluish Gray×29
Plate 1 x 1
Light Bluish Gray×3
Plate 6 x 12
Black×4
Plate 4 x 12
Black×8
Plate 4 x 10
Blue×4
Plate 4 x 4
Light Bluish Gray×2
Plate 2 x 8
Tan×3
Plate 2 x 8
Black×4
Plate 2 x 8
Light Bluish Gray×8
Plate, Round Corner 3 x 3
Dark Bluish Gray×4
Slope 18 4 x 2
Light Bluish Gray×2
Slope 45 2 x 4
Black×2
Arm Mechanical, Battle Droid
Light Bluish Gray×10
Slope 45 2 x 2
Light Bluish Gray×2
Slope 45 2 x 1
Light Bluish Gray×8
Panel 1 x 4 x 1
Light Bluish Gray×4
Hinge Cylinder 1 x 2 Locking with 2 Fingers and Axle Hole on Ends with Slots
Light Bluish Gray
Plate, Round Corner 4 x 4
Tan×32
Tile 2 x 2
Light Bluish Gray×4
Tile 1 x 2
Black×10
Tile 1 x 2
Trans-Brown×8
Tile 1 x 2
Light Bluish Gray×25
Tile 1 x 1
Light Bluish Gray×14
Technic, Plate 2 x 6 with 5 Holes
Black
Technic, Liftarm, Modified Bent Thick 1 x 11.5 Double
Black×2
Technic, Brick 1 x 14 with Holes
Light Bluish Gray×4
Plate, Modified 1 x 2 with Door Rail
Dark Bluish Gray×4
Technic, Axle 2L Notched
Red
Train, Track Rail Straight 16L (no slots, no tapered ends)
Light Bluish Gray×8
Technic, Axle and Pin Connector Perpendicular Double
Light Bluish Gray×2
Technic, Liftarm Thick 1 x 5
Black×2
Technic, Liftarm Thin 1 x 4 - Axle Holes
Dark Bluish Gray
Technic, Liftarm Thick 1 x 3
Black×2
Technic, Liftarm Thick 1 x 7
Black×2
Slope 33 3 x 2
Light Bluish Gray×2
Plate 1 x 8
Black
Plate 1 x 8
Light Bluish Gray×66
Plate 1 x 3
Black×8
Plate 1 x 3
Light Bluish Gray×26
Slope, Inverted 45 2 x 2 with Flat Bottom Pin
Light Bluish Gray×6
Slope, Inverted 45 2 x 1
Light Bluish Gray×28
Plate 1 x 6
Light Bluish Gray×17
Technic, Pin without Friction Ridges
Light Bluish Gray×3
Technic, Brick 1 x 16 with Holes
Black×2
Technic, Axle 4L
Black
Technic, Axle 6L
Black
Plate 1 x 4
Tan×10
Plate 1 x 4
Black×32
Plate 1 x 4
Dark Bluish Gray×8
Slope, Inverted 33 3 x 2 with Flat Bottom Pin and Connections between Studs
Light Bluish Gray×6
Technic, Axle 1L with Pin without Friction Ridges with Round Hole
Tan
Plate 2 x 6
Light Bluish Gray×12
Plate 2 x 10
Reddish Brown×24
Brick, Round 2 x 2 with Axle Hole
Trans-Clear
Brick, Round 2 x 2 with Axle Hole
Dark Bluish Gray
Plate 6 x 6
Dark Bluish Gray×2
Dish 8 x 8 Inverted (Radar) - Solid Studs with TIE Fighter Hatch Pattern
Light Bluish Gray
Dish 8 x 8 Inverted (Radar) - Solid Studs with Dark Bluish Gray Radial TIE Fighter Cockpit with 40 Black Rivets Pattern
Trans-Clear
Plate, Round 1 x 1
Trans-Red×19
Plate, Round 1 x 1
Trans-Green×7
Plate, Round 1 x 1
Dark Bluish Gray×51
Technic, Liftarm Thick 1 x 13
Black×10
Tile 1 x 8
Black×24
Tile 1 x 8
Light Bluish Gray×36
Wedge, Plate 4 x 2 Right
Black×44
Wedge, Plate 4 x 2 Left
Black×44
Technic, Pin 1/2 without Friction Ridges
Light Bluish Gray×3
Plate 2 x 16
Light Bluish Gray×4
Slope 33 3 x 1
Light Bluish Gray×12
Slope, Inverted 33 3 x 1
Light Bluish Gray×12
Technic, Axle 1L with Pin with Friction Ridges
Blue
Wedge, Plate 3 x 2 Right
Light Bluish Gray
Wedge, Plate 3 x 2 Left
Light Bluish Gray
Bracket 1 x 2 - 2 x 2
Black×8
Plate 1 x 10
Dark Bluish Gray×4
Cone 1 x 1 with Top Groove
Dark Bluish Gray
Wedge, Plate 2 x 4
Light Bluish Gray×8
Slope 30 1 x 1 x 2/3
Light Bluish Gray×26
Brick, Round 2 x 2 Dome Top
Dark Bluish Gray
Bar with Light Cover (Bulb) / Bionicle Barraki Eye
Trans-Red×2
Plate, Round 4 x 4 with Hole
Black
Plate, Modified 1 x 2 with Bar Handle on End
Dark Bluish Gray×4
Plate, Modified 1 x 2 with Bar Handle on End
Light Bluish Gray×28
Plate 1 x 12
Black×8
Plate 1 x 12
Light Bluish Gray×20
Panel 1 x 4 x 3 with Side Supports - Hollow Studs
Black×2
Plate, Modified 10 x 10 Octagonal with 6 x 6 Open Center
Light Bluish Gray×5
Minifigure, Utensil Hose Nozzle Elaborate
Light Bluish Gray×3
Slope, Curved 2 x 1 x 1 1/3 with Recessed Stud
Light Bluish Gray×8
Plate, Modified 1 x 1 with Open O Clip (Horizontal Grip)
Light Bluish Gray
Slope 18 2 x 1 x 2/3 with Grille
Dark Bluish Gray×14
Tile, Modified 4 x 4 with Studs on Edge
Black×20
Tile, Modified 4 x 6 with Studs on Edges
Black×40
Panel 1 x 1 x 1 Corner
Light Bluish Gray×4
Brick, Modified 2 x 2 with Pin and Axle Hole
Red×4
Brick, Modified 2 x 2 with Pin and Axle Hole
Light Bluish Gray×4
Technic, Pin Connector Round 2L with Slot (Pin Joiner Round)
Black×4
Tile 1 x 3
Black×8
Tile 1 x 3
Light Bluish Gray×2
Plate, Modified 1 x 2 with Clip on End (Horizontal Grip)
Yellow×8
Plate, Modified 1 x 2 with Clip on End (Horizontal Grip)
Black×6
Technic, Axle 2L with Reverser Handle Axle Connector
Light Bluish Gray×2
Technic, Pin 3L with Friction Ridges
Blue×24
Sticker Sheet for Set 75095 - (20028/6103027)
(Not Applicable)
Slope 30 1 x 2 x 2/3
Light Bluish Gray×34
Tile 2 x 4
Black×4
Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper)
Black×20
Tile, Modified 3 x 4 with 4 Studs in Center
Black×30
Plate, Modified 10 x 10 Octagonal with Hole
Dark Bluish Gray
Tile 8 x 16 with Bottom Tubes, Textured Surface
Black×9
Plate 2 x 14
Black×2
Plate, Modified 1 x 2 with Clip with Center Cut on Top
Light Bluish Gray
Plate 8 x 16
Black×12
Hinge Plate 2 x 2 Locking with 1 Finger on Top
Light Bluish Gray
Plate, Modified 1 x 4 with 2 Studs without Groove
Light Bluish Gray×8
Minifigure, Weapon Gun, Blaster SW Small with Scope
Black×2
Slope 45 2 x 1 with 2/3 Cutout
Black×2
Slope 45 2 x 1 with 2/3 Cutout
Light Bluish Gray×12
Arch 1 x 6 Raised Arch
Tan×4
Arch 1 x 6 Raised Arch
Light Bluish Gray×4
Bracket 1 x 2 - 2 x 4
Light Bluish Gray×4
Slope, Curved 4 x 2
Black×4
Brick and Axle Separator
Orange
Tile, Round 1 x 1
Trans-Red×4
Tile, Round 1 x 1
Light Bluish Gray×3
Minifigure, Utensil Handlebars with Angular Handles
Light Bluish Gray
Technic, Axle 4L with Center Stop
Tan
Plate, Modified 2 x 2 x 2/3 with 2 Studs on Side - Solid Bottom Tube
Black×8
Bracket 1 x 2 - 2 x 2 Inverted
Light Bluish Gray×8
Bracket 1 x 2 - 1 x 2 Inverted
Black×4
Bracket 1 x 2 - 1 x 2 Inverted
Dark Bluish Gray×18
Bracket 1 x 2 - 1 x 2
Light Bluish Gray×6Common questions about TIE Fighter - UCS
How much is LEGO TIE Fighter - UCS (75095-1) worth?
TIE Fighter - UCS sells for an average of $226.23 used and $329.27 new/sealed on BrickLink based on 6 months of completed sales. As a retired set, prices tend to hold steady or appreciate over time, especially for complete sets with original packaging. Actual prices vary with completeness — missing minifigures or key parts will lower the value.
What minifigures come in LEGO set 75095-1?
This set includes 1 minifigure: Imperial TIE Fighter Pilot - Printed Arms ($55.96). The minifigures have a combined BrickLink value of $55.96. Each figure is linked above with individual pricing if you're looking to buy or sell specific characters.
Is it worth parting out LEGO TIE Fighter - UCS?
The minifigures make up about 25% of the set value ($55.96 out of $226.23). Most of the value is in the complete set package, so selling it whole is likely the better move unless you have buyers lined up for specific figures.
Is LEGO TIE Fighter - UCS (75095-1) retired?
Yes, TIE Fighter - UCS was released in 2015 and has been retired from retail for several years. Retired LEGO sets are only available on the secondary market through BrickLink, eBay, or other resale platforms. At its current price point, it has appreciated since retirement.
How do I check if my TIE Fighter - UCS set is complete?
Use the parts list on this page to check every piece and all 1 minifigure. For the minifigures specifically, you can use the brick'em scanner to identify each figure from a photo and confirm it matches what should be in this set. Missing pieces can be individually sourced on BrickLink.