How much is LEGO Poe's X-Wing Fighter (75102-1) worth?

Poe's X-Wing Fighter sells for an average of $59.94 used and $134.14 new/sealed on BrickLink based on 6 months of completed sales. As a retired set, prices tend to hold steady or appreciate over time, especially for complete sets with original packaging. Actual prices vary with completeness. Missing minifigures or key parts will lower the value.

What minifigures come in LEGO set 75102-1?

This set includes 4 minifigures: Poe Dameron (Pilot Jumpsuit, Helmet) ($5.80), Resistance Pilot X-wing ($5.26), Resistance Ground Crew (Goss Toowers) ($4.84), BB-8 (Small Photoreceptor and Small Black Circle) ($2.62). The minifigures have a combined BrickLink value of $18.54. Each figure is linked above with individual pricing if you're looking to buy or sell specific characters.

Is it worth parting out LEGO Poe's X-Wing Fighter?

The minifigures make up about 31% of the set value ($18.54 out of $59.94). Most of the value is in the complete set package, so selling it whole is likely the better move unless you have buyers lined up for specific figures.

Is LEGO Poe's X-Wing Fighter (75102-1) retired?

Yes, Poe's X-Wing Fighter was released in 2015 and has been retired from retail for several years. Retired LEGO sets are only available on the secondary market through BrickLink, eBay, or other resale platforms.

How do I check if my Poe's X-Wing Fighter set is complete?

Use the parts list on this page to check every piece and all 4 minifigures. For the minifigures specifically, you can use the brick'em scanner to identify each figure from a photo and confirm it matches what should be in this set. Missing pieces can be individually sourced on BrickLink.

Poe's X-Wing Fighter

75102-1·Star Wars·2015·4 minifigs·199 parts

Used Avg

$59.94

New Avg

$134.14

Add to your inventory Scan the minifigs

About Poe's X-Wing Fighter

Poe's X-Wing Fighter (75102-1) is a LEGO Star Wars set released in 2015, currently averaging $59.94 used on BrickLink. It comes with 4 minifigures worth a combined $18.54. The set has retired from retail, so secondary market is the only option. The full parts inventory runs 199 pieces.

Parts (199)

Brick, Modified 1 x 2 with Studs on 1 Side

×4

Wedge 3 x 4 x 2/3 Curved with Cutout

×3

Plate, Modified 1 x 2 with Pin Hole on Top

×16

Plate, Modified 1 x 2 with Pin Hole on Top

×4

Slope, Curved 2 x 1 x 2/3

×6

Technic, Liftarm Thin 1 x 5 - Axle Holes

×2

Wedge, Plate 4 x 9 with Stud Notches

×2

Tile, Round 2 x 2 with Bottom Stud Holder

×2

Slope, Curved 2 x 2 x 2/3

×5

Projectile Launcher, 1 x 4 Spring Shooter with Light Bluish Gray Top

×4

Projectile Arrow, Bar 8L with Round End (Spring Shooter Dart)

×6

Projectile Launcher Part, Trigger for Gun, Mini Blaster / Shooter

×3

Projectile Launcher, 1 x 2 Mini Blaster / Shooter

×2

Tile, Round 2 x 2 with Hole

Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)

×6

Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)

×2

Bracket 3 x 2 x 1 1/3 with Bottom Tube

×3

Plate, Modified 1 x 2 with Pin Hole on Bottom

×4

Windscreen 8 x 4 x 2 with 2 Studs and Bar Handle with Silver Cockpit Window Frames with Rivets Pattern

Slope, Inverted 45 3 x 1 Double

×2

Tile, Modified 1 x 2 Grille with Bottom Groove

×13

Plate 2 x 2 Corner

×10

Plate 2 x 2 Corner

×2

Plate 2 x 2 Corner

×6

Hinge Plate 1 x 4 Swivel (2429 / 2430)

×8

Tile 1 x 4

×2

Tile, Modified 1 x 2 with Bar Handle

Plate 2 x 12

×2

Plate 2 x 12

×3

Plate, Modified 1 x 2 with Bar Handle on Side - Free Ends

×4

Plate 4 x 4 Corner

×8

Brick, Modified 1 x 4 with Channel

×4

Plate, Round 2 x 2 with Rounded Bottom (Boat Stud)

×4

Bar 8L with Stop Rings and Pin (Technic, Figure Accessory Ski Pole) - Flat End

×4

Technic, Pin with Short Friction Ridges

×6

Brick, Modified 1 x 2 with Grille / Fluted Profile

×2

Brick, Modified 1 x 2 with Grille / Fluted Profile

Brick, Modified 1 x 1 with Bar Handle

Brick 2 x 4

Brick 2 x 2

Brick 1 x 1

×2

Brick 1 x 4

×4

Brick 1 x 4

×2

Brick 1 x 4

×2

Plate 2 x 4

×4

Plate 2 x 4

×5

Plate 2 x 4

×7

Plate 2 x 4

Plate 2 x 3

×8

Plate 2 x 2

×4

Plate 2 x 2

×4

Plate 1 x 2

×17

Plate 1 x 2

×14

Plate 1 x 2

×2

Plate 1 x 2

×4

Plate 1 x 1

×11

Plate 1 x 1

×6

Plate 4 x 4

×4

Plate 4 x 8

Wedge, Plate 12 x 6 Left

Wedge, Plate 12 x 6 Right

Slope 45 2 x 1

×2

Slope 45 2 x 1

×4

Slope 45 2 x 1

×8

Brick, Modified 1 x 4 with Studs on Side

×4

Hinge Cylinder 1 x 2 Locking with 1 Finger and Axle Hole on Ends with Slots

Hinge Cylinder 1 x 2 Locking with 2 Fingers and Axle Hole on Ends with Slots

×2

Tile 2 x 2

Tile 1 x 2

×5

Tile 1 x 2

×7

Plate, Modified 2 x 3 with Hole

Technic, Brick 1 x 2 with Holes

×4

Technic, Pin 3/4

×5

Plate, Modified 1 x 2 with Door Rail

×2

Plate, Modified 1 x 2 with Door Rail

×2

Technic, Axle and Pin Connector Angled #2 - 180 degrees

×3

Technic, Axle Connector with Axle Hole

×2

Technic, Axle 2L Notched

×10

Technic, Brick 1 x 2 with Axle Hole

×4

Technic, Brick 1 x 2 with Axle Hole

×4

Technic, Gear Knob Cog Wheel with Axle Hole (+ Orientation)

Technic, Axle 5L

×2

Technic, Axle and Pin Connector Perpendicular 3L with Center Pin Hole

Technic Driving Ring Extension

×4

Technic, Gear 20 Tooth Bevel

Technic, Liftarm Thick 1 x 5

×2

Technic, Pin Connector Plate 1 x 2 x 1 2/3 with 2 Holes on Top

Technic, Brick 4 x 6 Open Center

Slope 33 3 x 4

×4

Slope 33 3 x 2

×4

Plate 1 x 8

×10

Plate 1 x 8

×2

Brick 1 x 3

×2

Plate 1 x 3

×8

Plate 1 x 3

×2

Hinge Plate 2 x 4 with Articulated Joint - Male

×4

Plate 1 x 6

×10

Plate 1 x 6

×3

Plate 1 x 6

×2

Slope, Inverted 45 2 x 2 Double Convex

×2

Technic, Brick 1 x 4 with Holes

×2

Technic, Brick 1 x 4 with Holes

×2

Technic, Axle 8L

×4

Plate 1 x 4

×2

Plate 1 x 4

×8

Plate 1 x 4

×2

Plate 1 x 4

×10

Technic Bush

×3

Technic Bush

×6

Technic, Axle 10L

Technic, Plate 2 x 8 with 7 Holes

Plate 2 x 6

×3

Plate 2 x 6

×8

Brick, Round 2 x 2 with Axle Hole

×8

Plate 6 x 6

Minifigure, Utensil Tool Spanner Wrench / Screwdriver

Plate, Round 2 x 2 with Axle Hole

×4

Brick, Modified 1 x 1 with Headlight

×2

Plate, Round 1 x 1

×7

Plate, Round 1 x 1

×28

Minifigure, Utensil Seat / Chair 2 x 2

Plate, Modified 1 x 1 with Light Attachment - Thick Ring

×4

Plate, Modified 1 x 1 with Open O Clip Thick (Vertical Grip)

×4

Technic, Liftarm Thin 1 x 2 - Axle Holes

×12

Wedge, Plate 4 x 2 Right

Wedge, Plate 4 x 2 Left

Technic Bush 1/2 Smooth

×6

Technic, Pin 1/2 without Friction Ridges

×3

Technic, Pin 1/2 without Friction Ridges

×5

Technic, Axle 1L with Pin with Friction Ridges

×4

Container, Box 2 x 2 x 2

Container, Box 2 x 2 x 2 Door with Slot

Wedge 6 x 4 Triple Curved

Wedge 6 x 4 Triple Inverted Curved

×2

Wedge, Plate 4 x 4

Wedge, Plate 3 x 2 Right

Wedge, Plate 3 x 2 Left

Technic, Axle 7L

×4

Hinge Tile 1 x 3 Locking with 1 Finger on Top

Slope, Curved 2 x 2 with Debossed Side Ports

×4

Plate 1 x 10

×2

Plate 1 x 10

Cone 1 x 1 with Top Groove

×5

Antenna Small Base with Black Lever (4592 / 4593)

×3

Antenna Small Base with Black Lever (4592 / 4593)

×2

Wedge, Plate 12 x 3 Left

Wedge, Plate 12 x 3 Right

Slope, Curved 2 x 2 x 2/3 with 2 Studs and Curved Sides

×2

Panel 1 x 2 x 1 with Rounded Corners

×2

Slope, Inverted 45 4 x 2 Double with 2 x 2 Cutout

×2

Wedge, Plate 8 x 3 Pentagonal Right

Wedge, Plate 8 x 3 Pentagonal Left

Vehicle, Mudguard 4 x 2 1/2 x 1 2/3 with Arch Round

×4

Technic, Axle 8L with Stop

×4

Wheel 18mm D. x 14mm with Axle Hole, Fake Bolts and Shallow Spokes

×4

Bar 7 x 3 with 2 U Clips (Ladder)

Slope, Inverted 45 6 x 4 Double with 4 x 4 Cutout and 3 Holes

Brick, Modified 1 x 1 with Open O Clip (Vertical Grip) - Hollow Stud

Plate 1 x 12

×2

Plate 1 x 12

×2

Brick, Modified 2 x 2 with Pin and Axle Hole

Technic, Pin Connector Round 2L with Slot (Pin Joiner Round)

×4

Technic, Pin Connector Round 2L with Slot (Pin Joiner Round)

×4

Tile 1 x 3

×2

Tile 1 x 3

×6

Technic, Axle Connector 2L (Smooth with x Hole + Orientation)

×4

Technic, Brick 1 x 1 with Hole

×2

Technic, Brick 1 x 1 with Hole

×8

Technic, Gear 12 Tooth Bevel

Technic, Liftarm Thin 1 x 3 - Axle Holes

×2

Technic, Liftarm Thin 1 x 3 - Axle Holes

×2

Tile 1 x 6

×6

Sticker Sheet for Set 75102 - International Version - (21531/6116847)

Slope, Curved 10 x 1

×2

Slope, Curved 10 x 1

×2

Slope 30 1 x 2 x 2/3

×6

Slope 30 1 x 2 x 2/3

Tile 2 x 4

×6

Tile 2 x 4

Technic, Axle 4L with Stop

×3

Brick, Modified 1 x 1 with Stud on Side

×10

Brick, Modified 1 x 1 with Stud on Side

×2

Technic, Gear 20 Tooth Bevel with Pin Hole

Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper)

×3

Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper)

Slope, Curved 2 x 4 x 2/3 with Bottom Tubes

×8

Plate, Modified 1 x 2 with Clip with Center Cut on Top

×2

Minifigure, Weapon Gun, Blaster SW Small with Scope

×2

Slope 45 2 x 1 with 2/3 Cutout

×2

Slope, Curved 4 x 1 x 2/3 Double

×4

Brick and Axle Separator

Tile, Round 1 x 1

×6

Tile, Round 1 x 1

×5

Plate, Modified 2 x 2 x 2/3 with 2 Studs on Side

×4

Bracket 1 x 2 - 1 x 2

×2

Rubber Belt Large (Round Cross Section) - Approx. 3 1/4 x 3 1/4

×4

Poe's X-Wing Fighter

About Poe's X-Wing Fighter

Part-out value

Seller notes

Minifigures in Poe's X-Wing Fighter (4)

Parts (199)

Common questions about Poe's X-Wing Fighter

How much is LEGO Poe's X-Wing Fighter (75102-1) worth?

What minifigures come in LEGO set 75102-1?

Is it worth parting out LEGO Poe's X-Wing Fighter?

Is LEGO Poe's X-Wing Fighter (75102-1) retired?

How do I check if my Poe's X-Wing Fighter set is complete?

More Star Wars sets

Explore more

Company

Legal