About Tantive IV
Tantive IV (75244-1) is a LEGO Star Wars set released in 2019, currently averaging $225.78 used on BrickLink. It comes with 6 minifigures worth a combined $111.90. The set has retired from retail, so secondary market is the only option. The full parts inventory runs 366 pieces.
Part-out value
The minifigures account for about 50% of the set's value ($111.90 out of $225.78). The remaining value is in the parts and the set as a complete package. Selling complete will likely net more than parting out unless you have specific demand for the individual figures.
Seller notes
- Bail Organa - Olive Green Cloak ($75.47) is the most valuable minifig in this set. If you're buying this set secondhand, check that this figure is included — it's often the first one pulled by sellers who part out.
- 6 minifigures at $111.90 combined value. That's a solid minifig haul — consider listing the figures individually on BrickLink where per-figure prices tend to be highest.
Minifigures in Tantive IV (6)
Parts (366)
Tile, Modified 2 x 2 Inverted
Light Bluish Gray×10
Brick, Modified 1 x 2 with Studs on 1 Side
Yellow
Brick, Modified 1 x 2 with Studs on 1 Side
Light Bluish Gray×12
Plate, Round 6 x 6 with Hole
White×2
Technic, Axle 1L with Pin 2L with Friction Ridges
Dark Bluish Gray×3
Minifigure Footgear Roller Skate
Light Bluish Gray×5
Minifigure Footgear Roller Skate
Flat Silver×2
Plate, Modified 1 x 2 with Pin Hole on Top
Dark Bluish Gray×2
Slope, Curved 2 x 1 x 2/3
White×5
Slope, Curved 2 x 1 x 2/3
Sand Blue
Slope, Curved 2 x 1 x 2/3
Dark Bluish Gray
Slope, Curved 2 x 1 x 2/3
Bright Light Yellow
Cone 1 x 1 Inverted with Bar
Light Bluish Gray×4
Minifigure, Utensil Paint Roller Brush Handle
Light Bluish Gray×8
Tile 2 x 2 Corner
White×2
Tile, Round 2 x 2 with Bottom Stud Holder
Light Bluish Gray×2
Tile, Round 2 x 2 with Bottom Stud Holder with Fine Mesh Grille Manhole Cover Pattern
Light Bluish Gray×4
Slope, Curved 2 x 2 x 2/3
White×49
Slope, Curved 2 x 2 x 2/3
Dark Red×6
Slope, Curved 2 x 2 x 2/3
Light Bluish Gray
Arch 1 x 6 x 2 - Medium Thick Top without Reinforced Underside
White×2
Projectile Launcher, 1 x 4 Spring Shooter with Light Bluish Gray Top
Dark Bluish Gray×2
Projectile Arrow, Bar 8L with Round End (Spring Shooter Dart)
Trans-Red×4
Projectile Launcher Part, Trigger for Gun, Mini Blaster / Shooter
Dark Bluish Gray×3
Projectile Launcher, 1 x 2 Mini Blaster / Shooter
White×2
Tile, Round 2 x 2 with Hole
Dark Bluish Gray×3
Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)
White
Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)
Black×4
Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)
Light Bluish Gray
Tile, Modified 1 x 1 with Open O Clip
Dark Bluish Gray×13
Tile, Modified 1 x 1 with Open O Clip
Light Bluish Gray×6
Plate, Round Half 3 x 6 with 1 x 2 Cutout
White×2
Plate, Round Half 3 x 6 with 1 x 2 Cutout
Light Bluish Gray×4
Plate, Modified 1 x 2 with Bar Handles on Ends
Light Bluish Gray
Tile, Round 2 x 2 with Open Stud
Dark Bluish Gray×2
Tile, Round 1 x 1 with Bar and Small Pin Hole
White×3
Wheel Hard Plastic, Treaded with 7 Pin Holes (37mm D. x 22mm)
Pearl Dark Gray×11
Brick, Modified 1 x 2 x 1 2/3 with Studs on Side
Light Bluish Gray×2
Technic, Axle and Pin Connector Hub with 1L Axle
Light Bluish Gray×5
Bar Holder with Handle
Light Bluish Gray
Tile, Modified 1 x 2 Grille with Bottom Groove
Flat Silver×22
Plate 2 x 2 Corner
Red×2
Plate 2 x 2 Corner
Dark Bluish Gray×2
Slope, Curved 2 x 1 x 2/3 Inverted
Light Bluish Gray×4
Tile, Round 1 x 1 Half Circle Extended
Light Bluish Gray×2
Wedge, Plate 2 x 2 Left
Light Bluish Gray×2
Wedge, Plate 2 x 2 Right
Light Bluish Gray×2
Tile 1 x 4
White×5
Tile 1 x 4
Dark Red×2
Tile 1 x 4
Light Bluish Gray×5
Tile, Modified 1 x 2 with Bar Handle
Black
Plate 2 x 12
Black
Minifigure, Visor Standard
Black
Wedge, Plate 3 x 3 Cut Corner
White×4
Brick, Modified 1 x 2 with Pin
Red×2
Cylinder Half 2 x 4 x 2 with 1 x 2 Cutout
White×12
Tile, Round 1 x 1 Quarter
Light Bluish Gray×8
Tile, Round 1 x 1 Quarter
Bright Light Yellow×2
Plate, Modified 1 x 2 with Bar Handle on Side - Free Ends
White×2
Plate, Round 1 x 1 with Bar Handle
Light Bluish Gray
Brick, Modified 1 x 4 with Channel
Light Bluish Gray
Plate, Round 2 x 2 with Rounded Bottom (Boat Stud)
Tan×2
Plate, Round 2 x 2 with Rounded Bottom (Boat Stud)
Black×6
Plate, Round 2 x 2 with Rounded Bottom (Boat Stud)
Dark Bluish Gray×5
Plate, Round 2 x 2 with Rounded Bottom (Boat Stud)
Trans-Orange×11
Plate, Modified 2 x 4 with Pin Holes
Light Bluish Gray×5
Tile 2 x 3
White
Technic, Disk 3 x 3
Light Bluish Gray×13
Tile, Modified Facet 2 x 2
White×16
Technic, Brick 1 x 10 with Holes
White×4
Turntable 2 x 2 Square Base
White×4
Technic, Pin with Short Friction Ridges
Black×67
Tile, Round Corner 2 x 2 Macaroni
Dark Red×8
Tile, Round Corner 2 x 2 Macaroni
Light Bluish Gray×12
Plate, Modified 2 x 2 with Pin Holes
Red
Slope 45 2 x 1 with Cutout without Stud
Light Bluish Gray×4
Cone Half 10 x 5 x 6
White×4
Wedge 2 x 1 x 2/3 Right
White
Wedge 2 x 1 x 2/3 Left
White
Brick 2 x 4
Black
Brick 2 x 3
Green×2
Brick 2 x 2
White×2
Brick 2 x 2
Dark Red×2
Brick 1 x 2
White×28
Brick 1 x 1
White×2
Brick 1 x 6
White×2
Brick 1 x 4
White×14
Brick 1 x 4
Light Bluish Gray×2
Brick, Modified 1 x 2 with Log Profile
Tan×10
Minifigure, Utensil Binoculars Town
Dark Bluish Gray×3
Plate, Modified 2 x 3 Inverted with 4 Studs and Bar Handle on Bottom (Rocker Plate)
White×7
Plate 2 x 4
White×6
Plate 2 x 4
Tan×2
Plate 2 x 4
Red
Plate 2 x 4
Black×2
Plate 2 x 4
Light Bluish Gray×33
Plate 2 x 3
White×2
Plate 2 x 3
Red×2
Plate 2 x 3
Light Bluish Gray×12
Plate 2 x 2
White×3
Plate 2 x 2
Tan×8
Plate 2 x 2
Blue×2
Plate 2 x 2
Dark Bluish Gray×6
Plate 2 x 2
Light Bluish Gray×5
Minifigure, Utensil Zipline Trolley with Handle and Pulley Wheel
Dark Bluish Gray
Plate 1 x 2
White×9
Plate 1 x 2
Red×18
Plate 1 x 2
Black×6
Plate 1 x 2
Trans-Brown×2
Plate 1 x 2
Dark Red×30
Plate 1 x 2
Dark Bluish Gray×5
Plate 1 x 2
Light Bluish Gray×15
Brick, Modified 1 x 2 with Bar Handle on Side
Light Bluish Gray×2
Plate 1 x 1
White×5
Plate 1 x 1
Black×2
Plate 1 x 1
Light Bluish Gray×3
Plate 1 x 1
Bright Light Yellow×2
Plate 6 x 12
Light Bluish Gray×2
Plate 4 x 12
White×2
Plate 4 x 10
White×6
Minifigure, Utensil Binoculars Space
Dark Bluish Gray
Plate 4 x 4
White
Plate 4 x 4
Dark Bluish Gray×5
Plate 4 x 6
White×7
Plate 2 x 8
Tan
Plate 2 x 8
Dark Bluish Gray×4
Plate 4 x 8
Light Bluish Gray×2
Bar 4L (Lightsaber Blade / Wand)
Light Bluish Gray×4
Arm Mechanical, Battle Droid
Dark Bluish Gray×3
Slope 45 2 x 2
White×3
Brick, Modified 1 x 4 with Studs on Side
Light Bluish Gray×2
Wedge, Plate 4 x 4 Cut Corner
White×2
Brick, Round 1 x 1
Yellow×2
Brick, Round 1 x 1
Black×8
Tile 2 x 2
Light Bluish Gray×6
Tile 1 x 2
White×26
Tile 1 x 2
Tan×4
Tile 1 x 2
Sand Blue×2
Tile 1 x 2
Dark Red×5
Tile 1 x 2
Light Bluish Gray×4
Tile 1 x 2
Bright Light Yellow×2
Tile 1 x 2 with SW Computer Pattern
Light Bluish Gray×2
Tile 1 x 1
White×2
Tile 1 x 1
Sand Blue×4
Tile 1 x 1
Light Bluish Gray×3
Technic, Brick 1 x 2 with Holes
Red×9
Technic, Brick 1 x 2 with Holes
Dark Bluish Gray×8
Technic, Pin 3/4
Tan×7
Technic, Brick 1 x 14 with Holes
Light Bluish Gray
Plate, Modified 1 x 2 with Door Rail
White×7
Plate, Modified 1 x 2 with Door Rail
Sand Blue×2
Plate, Modified 1 x 2 with Door Rail
Dark Bluish Gray×2
Plate, Modified 1 x 2 with Door Rail
Light Bluish Gray×2
Technic, Pin 3L with Friction Ridges and Stop Bush
Red×2
Technic, Axle 2L Notched
Red
Technic, Plate 1 x 5 with Smooth Ends, 4 Studs and Center Axle Hole
White×8
Technic, Pin Double with Axle Hole
Light Bluish Gray×2
Technic, Axle 5.5L with Stop
Dark Bluish Gray×8
Brick 1 x 2 x 2 with Inside Stud Holder
White×12
Technic, Liftarm Thick 1 x 7
Red×2
Technic, Liftarm, Modified Bent Thick L-Shape 3 x 5
White×4
Technic, Brick 6 x 8 Open Center
Black×2
Technic, Brick 5 x 5 Right Angle (1 x 4 - 1 x 4)
Black×2
Slope, Curved 2 x 2 x 2/3 Inverted
White×15
Bar 1L with 1 x 1 Round Plate with Hollow Stud
Light Bluish Gray×13
Brick, Modified 1 x 1 x 1 2/3 with Studs on Side
Red×2
Brick, Modified 1 x 1 x 1 2/3 with Studs on Side
Dark Bluish Gray×12
Slope 33 3 x 4
White
Slope 33 3 x 2
White×3
Slope 33 2 x 2 Double
White
Tile, Modified 2 x 2 with Studs on Edge
White×2
Tile, Modified 2 x 2 with Studs on Edge
Yellow
Tile, Modified 2 x 2 with Studs on Edge
Dark Red×3
Tile, Modified 2 x 2 with Studs on Edge
Light Bluish Gray×2
Plate, Modified 1 x 3 with 2 Studs (Double Jumper)
White×4
Plate 1 x 8
White×4
Plate 1 x 8
Light Bluish Gray×5
Plate 1 x 8
Bright Light Yellow×2
Brick 1 x 3
Light Bluish Gray
Plate 1 x 3
Tan×2
Slope, Inverted 45 2 x 2 with Flat Bottom Pin
White×2
Plate 1 x 6
White×8
Plate 1 x 6
Red×4
Plate 1 x 6
Blue×2
Slope 33 3 x 3 Double Convex Corner
White×4
Slope 65 2 x 2 x 2 with Bottom Tube
White×8
Bracket 1 x 1 - 1 x 1 Inverted
White×2
Bracket 1 x 1 - 1 x 1 Inverted
Black
Bracket 1 x 1 - 1 x 1 Inverted
Dark Bluish Gray×12
Bracket 1 x 1 - 1 x 1
Light Bluish Gray×12
Technic, Brick 1 x 4 with Holes
White×6
Technic, Brick 1 x 4 with Holes
Red×2
Technic, Brick 1 x 8 with Holes
Light Bluish Gray×2
Technic, Brick 1 x 16 with Holes
White×6
Technic, Axle 4L
Black×3
Technic, Axle 6L
Black
Plate 1 x 4
White×6
Plate 1 x 4
Black×6
Plate 1 x 4
Dark Red×6
Plate 1 x 4
Dark Bluish Gray×2
Plate 1 x 4
Light Bluish Gray×8
Plate 1 x 4
Bright Light Yellow×6
Technic Bush
Light Bluish Gray×4
Slope, Curved 1 x 2 with Bottom Stud Holder
Light Bluish Gray
Slope, Inverted 33 3 x 2 with Flat Bottom Pin and Connections between Studs
White×3
Plate 2 x 6
White
Plate 2 x 6
Tan
Plate 2 x 6
Red
Plate 2 x 6
Black×7
Plate 2 x 6
Light Bluish Gray×9
Plate 2 x 10
White
Plate 2 x 10
Dark Bluish Gray×2
Plate 2 x 10
Light Bluish Gray
Technic, Link Tread
Light Bluish Gray×3
Technic, Brick 1 x 12 with Holes
Blue×2
Hinge Brick 1 x 2 Base
Light Bluish Gray×2
Hinge Brick 1 x 2 Top Plate
Dark Bluish Gray
Brick, Round 2 x 2 with Axle Hole
Yellow×23
Brick, Round 2 x 2 with Axle Hole
Red×2
Bracket 2 x 2 - 2 x 2 with 2 Holes
Light Bluish Gray×12
Dish 4 x 4 Inverted (Radar) with Solid Stud
White×4
Plate, Round 2 x 2 with Axle Hole
White×2
Plate, Round 2 x 2 with Axle Hole
Yellow×5
Plate, Round 2 x 2 with Axle Hole
Red×3
Plate, Round 2 x 2 with Axle Hole
Black
Plate, Round 2 x 2 with Axle Hole
Dark Bluish Gray×6
Plate, Round 2 x 2 with Axle Hole
Light Bluish Gray×11
Brick, Modified 1 x 1 with Headlight
Dark Bluish Gray×5
Plate, Round 1 x 1
Red×3
Plate, Round 1 x 1
Trans-Red×7
Plate, Round 1 x 1
Lime×7
Plate, Round 1 x 1
Pearl Dark Gray×6
Plate, Round 1 x 1
Flat Silver×21
Minifigure, Utensil Seat / Chair 2 x 2
Black×2
Plate, Modified 1 x 1 with Light Attachment - Thick Ring
White×4
Plate, Modified 1 x 1 with Open O Clip Thick (Vertical Grip)
White
Plate, Modified 1 x 1 with Open O Clip Thick (Vertical Grip)
Dark Bluish Gray×8
Technic, Liftarm Thick 1 x 13
Black
Plate 8 x 8
White
Tile 1 x 8
White×11
Tile 1 x 8
Dark Red×2
Tile 1 x 8
Light Bluish Gray×4
Technic, Liftarm Thin 1 x 2 - Axle Holes
Light Bluish Gray×6
Plate, Modified 1 x 4 with 2 Studs with Groove
White×8
Plate, Modified 1 x 4 with 2 Studs with Groove
Light Bluish Gray×4
Wedge 6 x 2 Right
White×2
Wedge 6 x 2 Left
White×2
Wedge, Plate 4 x 2 Right
White×6
Wedge, Plate 4 x 2 Left
White×6
Technic Bush 1/2 Smooth
Light Bluish Gray×4
Technic, Pin 1/2 without Friction Ridges
Blue×23
Plate 2 x 16
White×2
Slope 33 3 x 1
White
Slope 33 3 x 1
Light Bluish Gray×3
Technic, Axle 1L with Pin with Friction Ridges
Blue×2
Wedge, Plate 4 x 4
Light Bluish Gray×2
Wedge, Plate 3 x 2 Right
White
Wedge, Plate 3 x 2 Right
Dark Bluish Gray×5
Wedge, Plate 3 x 2 Right
Light Bluish Gray
Wedge, Plate 3 x 2 Left
White
Wedge, Plate 3 x 2 Left
Dark Bluish Gray×5
Wedge, Plate 3 x 2 Left
Light Bluish Gray
Dish 3 x 3 Inverted (Radar)
White
Hinge Plate 1 x 4 Locking Dual 1 Finger on Side
Light Bluish Gray×4
Slope 75 2 x 1 x 3 - Hollow Stud
White×2
Tail Shuttle, Small
White
Vehicle, Mudguard 2 x 4 with Headlights Overhang
White×2
Bracket 1 x 2 - 2 x 2
Tan×2
Bracket 1 x 2 - 2 x 2
Black×4
Bracket 1 x 2 - 2 x 2
Dark Bluish Gray×4
Plate 1 x 10
White×2
Plate 1 x 10
Light Bluish Gray
Plate 1 x 10
Reddish Brown×2
Plate, Modified 1 x 8 with Door Rail
Light Bluish Gray×2
Technic, Axle 3L
Light Bluish Gray×2
Cone 1 x 1 with Top Groove
Dark Bluish Gray×6
Cone 1 x 1 with Top Groove
Light Bluish Gray×4
Plate, Modified 1 x 2 with Bar Arm Up (Horizontal Arm 5mm)
Black
Plate, Modified 1 x 2 with Bar Arm Up (Horizontal Arm 5mm)
Light Bluish Gray×14
Brick, Modified 1 x 1 with Studs on 4 Sides
Light Bluish Gray
Bar 1 x 3 with Clip and Stud Holder (Robot Arm)
Light Bluish Gray
Dish 2 x 2 Inverted (Radar)
Light Bluish Gray×4
Wedge 2 x 4 Triple
White×2
Plate, Modified 1 x 2 with Bar Handle on Side - Closed Ends
Tan×2
Plate, Modified 1 x 2 with Bar Handle on Side - Closed Ends
Dark Bluish Gray×2
Plate, Modified 1 x 2 with Bar Handle on Side - Closed Ends
Light Bluish Gray×2
Slope 45 3 x 4 Double / 33
White
Panel 1 x 2 x 1 with Rounded Corners
Light Bluish Gray×3
Wedge, Plate 8 x 3 Pentagonal Right
White×5
Wedge, Plate 8 x 3 Pentagonal Left
White×5
Slope 30 1 x 1 x 2/3
White×3
Slope 30 1 x 1 x 2/3
Light Bluish Gray×7
Wedge, Plate 6 x 3 Right
Dark Red
Wedge, Plate 6 x 3 Left
Dark Red
Minifigure, Weapon Gun, Blaster SW Standard
Flat Silver×3
Plate, Modified 1 x 2 with 2 Open O Clips (Horizontal Grip)
Light Bluish Gray×6
Hinge Plate 1 x 2 Locking with 2 Fingers on Side
Light Bluish Gray×8
Plate, Round 4 x 4 with Hole
Dark Red×2
Plate, Round 4 x 4 with Hole
Light Bluish Gray×10
Brick, Modified 1 x 1 with Open O Clip (Vertical Grip) - Hollow Stud
Light Bluish Gray
Plate 1 x 12
White×6
Plate 1 x 12
Dark Bluish Gray×2
Minifigure, Utensil Hose Nozzle Elaborate
Light Bluish Gray×3
Slope, Curved 2 x 1 x 1 1/3 with Recessed Stud
White×6
Brick 1 x 12
Light Bluish Gray×2
Slope 18 2 x 1 x 2/3 with Grille
Dark Bluish Gray×2
Slope 18 2 x 1 x 2/3 with Grille
Light Bluish Gray×2
Turntable 4 x 4 Square Base, Locking
White
Slope, Curved 4 x 1
Dark Red×2
Tile, Modified 4 x 4 with Studs on Edge
Light Bluish Gray×2
Tile, Modified 4 x 6 with Studs on Edges
White×4
Tail Shuttle
White×4
Technic, Pin Connector Round 2L with Slot (Pin Joiner Round)
Light Bluish Gray×4
Tile 1 x 3
Light Bluish Gray×2
Plate, Modified 1 x 2 with Clip on End (Horizontal Grip)
White×4
Technic, Liftarm, Modified Frame Thick 5 x 7 Open Center
Light Bluish Gray×4
Wedge 4 x 3 Triple Curved No Studs
White×2
Plate, Modified 4 x 4 with 2 x 2 Open Center
Black
Technic, Pin 3L with Friction Ridges
Blue×12
Technic, Axle 3L with Stud
Dark Tan×2
Technic, Liftarm Thin 1 x 3 - Axle Holes
Yellow×4
Technic, Liftarm Thin 1 x 3 - Axle Holes
Dark Bluish Gray×2
Tile 1 x 6
White×5
Tile 1 x 6
Dark Red×6
Sticker Sheet for Set 75244 - (50114/6257054)
(Not Applicable)
Brick, Round Corner 2 x 2 Macaroni with Stud Notch and Reinforced Underside
White×14
Cylinder Half 2 x 4 x 5 with 1 x 2 Cutout
White×6
Slope 30 1 x 2 x 2/3
White×7
Slope 30 1 x 2 x 2/3
Tan×4
Slope 30 1 x 2 x 2/3
Dark Bluish Gray×2
Tile 2 x 4
Light Bluish Gray×2
Brick, Round 4 x 4 with Hole
White×14
Technic, Pin 3L with Friction Ridges and Center Pin Hole
Light Bluish Gray
Technic, Axle 4L with Stop
Dark Bluish Gray×4
Brick, Modified 1 x 1 with Stud on Side
Red×12
Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper)
White×2
Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper)
Black×2
Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper)
Light Bluish Gray×3
Bar 5L with Handle (Friction Ram)
Light Bluish Gray×5
Bar 3L (Bar Arrow)
Light Bluish Gray×3
Bar 3L (Bar Arrow)
Reddish Brown×2
Slope, Curved 2 x 4 x 2/3 with Bottom Tubes
White×2
Minifigure, Utensil Ski Pole 3L with Handle, Stop Ring and Side Stops
Dark Bluish Gray×5
Plate 2 x 14
Black
Plate 2 x 14
Light Bluish Gray×2
Plate, Modified 1 x 2 with Clip with Center Cut on Top
White
Plate, Modified 1 x 2 with Clip with Center Cut on Top
Light Bluish Gray×5
Minifigure, Weapon Gun, Blaster SW Small with Scope
Flat Silver
Slope 45 2 x 1 with 2/3 Cutout
White×27
Slope 45 2 x 1 with 2/3 Cutout
Sand Blue
Panel 1 x 2 x 1 with Rounded Corners and Center Divider
Tan×2
Slope, Curved 4 x 1 x 2/3 Double
White×6
Bracket 1 x 2 - 2 x 4
Dark Bluish Gray×8
Brick and Axle Separator
Orange
Hips and Legs Plain
White
Cone 2 x 2 Truncated
Light Bluish Gray×5
Tile, Round 1 x 1
White×2
Tile, Round 1 x 1
Light Bluish Gray×5
Bracket 1 x 2 - 2 x 2 Inverted
White×9
Bracket 1 x 2 - 2 x 2 Inverted
Black×6
Bracket 1 x 2 - 2 x 2 Inverted
Light Bluish Gray×8
Minifigure, Utensil Ingot 1 x 2
Light Bluish Gray×29
Bracket 1 x 2 - 1 x 2 Inverted
White×4
Bracket 1 x 2 - 1 x 2 Inverted
Dark Bluish Gray×2
Bracket 1 x 2 - 1 x 2
White×2
Bracket 1 x 2 - 1 x 2
Light Bluish Gray×2Common questions about Tantive IV
How much is LEGO Tantive IV (75244-1) worth?
Tantive IV sells for an average of $225.78 used and $286.35 new/sealed on BrickLink based on 6 months of completed sales. As a retired set, prices tend to hold steady or appreciate over time, especially for complete sets with original packaging. Actual prices vary with completeness — missing minifigures or key parts will lower the value.
What minifigures come in LEGO set 75244-1?
This set includes 6 minifigures: Astromech Droid, R2-D2 - Flat Silver Head, Lavender Dots and Small Receptor ($2.15), C-3PO - Colorful Wires, Printed Legs ($3.51), Rebel Fleet Trooper - Male, Vest with Pockets, Light Nougat Neck ($4.79), Captain Antilles - Dark Tan Shirt, Small Rank Badge ($18.31), plus 2 more. The minifigures have a combined BrickLink value of $111.90. Each figure is linked above with individual pricing if you're looking to buy or sell specific characters.
Is it worth parting out LEGO Tantive IV?
The minifigures make up about 50% of the set value ($111.90 out of $225.78). Most of the value is in the complete set package, so selling it whole is likely the better move unless you have buyers lined up for specific figures.
Is LEGO Tantive IV (75244-1) retired?
Yes, Tantive IV was released in 2019 and has been retired from retail for several years. Retired LEGO sets are only available on the secondary market through BrickLink, eBay, or other resale platforms. At its current price point, it has appreciated since retirement.
How do I check if my Tantive IV set is complete?
Use the parts list on this page to check every piece and all 6 minifigures. For the minifigures specifically, you can use the brick'em scanner to identify each figure from a photo and confirm it matches what should be in this set. Missing pieces can be individually sourced on BrickLink.