How much is LEGO R2-D2 (75308-1) worth?

R2-D2 sells for an average of $96.72 used and $185.13 new/sealed on BrickLink based on 6 months of completed sales. As a retired set, prices tend to hold steady or appreciate over time, especially for complete sets with original packaging. Actual prices vary with completeness. Missing minifigures or key parts will lower the value.

What minifigures come in LEGO set 75308-1?

This set includes 1 minifigure: Astromech Droid, R2-D2 - Flat Silver Head, Dark Pink Dots and Large Receptor ($2.38). The minifigures have a combined BrickLink value of $2.38. Each figure is linked above with individual pricing if you're looking to buy or sell specific characters.

Is it worth parting out LEGO R2-D2?

The minifigures make up about 2% of the set value ($2.38 out of $96.72). Most of the value is in the complete set package, so selling it whole is likely the better move unless you have buyers lined up for specific figures.

Is LEGO R2-D2 (75308-1) retired?

Yes, R2-D2 was released in 2021 and has been retired from retail for several years. Retired LEGO sets are only available on the secondary market through BrickLink, eBay, or other resale platforms.

How do I check if my R2-D2 set is complete?

Use the parts list on this page to check every piece and all 1 minifigure. For the minifigures specifically, you can use the brick'em scanner to identify each figure from a photo and confirm it matches what should be in this set. Missing pieces can be individually sourced on BrickLink.

R2-D2

75308-1·Star Wars·2021·1 minifig·355 parts

Used Avg

$96.72

New Avg

$185.13

Add to your inventory Scan the minifigs

About R2-D2

R2-D2 (75308-1) is a LEGO Star Wars set released in 2021, currently averaging $96.72 used on BrickLink. It comes with 1 minifigure worth a combined $2.38. The set has retired from retail, so secondary market is the only option. The full parts inventory runs 355 pieces.

Part-out value

Parts (355)

Plate, Modified 2 x 2 with Pin Hole - Full Cross Support Underneath

×8

Plate, Modified 2 x 2 with Pin Hole - Full Cross Support Underneath

×6

Tile, Modified 2 x 2 Inverted

×8

Brick, Modified 1 x 2 with Studs on 1 Side

×12

Brick, Modified 1 x 2 with Studs on 1 Side

×5

Plate 3 x 3

×4

Plate 3 x 3

×4

Technic, Axle 1L with Pin 2L with Friction Ridges

×9

Plate, Modified 1 x 2 with Pin Hole on Top

×4

Plate, Modified 1 x 2 with Pin Hole on Top

×4

Slope, Curved 2 x 1 x 2/3

×8

Slope, Curved 2 x 1 x 2/3

×6

Slope, Curved 2 x 1 x 2/3

×2

Plate, Round 4 x 4 with 2 x 2 Round Open Center

×2

Slope, Curved 4 x 1 Inverted

×2

Hose, Flexible Ribbed with 8mm Ends 12L / 9.6cm

×4

Panel 1 x 4 x 2 with Side Supports - Hollow Studs

×2

Tile, Round 2 x 2 with Bottom Stud Holder

×2

Slope, Curved 2 x 2 x 2/3

×10

Slope, Curved 2 x 2 x 2/3

Technic, Pin with Friction Ridges and Pin Hole

×18

Technic, Pin with Friction Ridges and Pin Hole

×2

Arch 1 x 6 x 2 - Medium Thick Top without Reinforced Underside

×2

Plate, Modified 3 x 3 Cross

×2

Technic, Axle 5L with Stop

Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)

×2

Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)

×2

Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)

×10

Tile, Modified 1 x 1 with Open O Clip

×2

Tile, Modified 1 x 1 with Open O Clip

×6

Technic, Axle 2L with Pin with Friction Ridges

×2

Technic, Liftarm Thick 1 x 1 (Spacer)

×12

Tile, Round 2 x 2 with Open Stud

×3

Plate, Modified 1 x 2 with Pin Hole on Bottom

×8

Plate, Modified 1 x 2 with Pin Hole on Bottom

×6

Brick, Modified 1 x 2 x 1 2/3 with Studs on Side

×2

Brick, Modified 1 x 2 x 1 2/3 with Studs on Side

Brick 2 x 2 Corner

×4

Brick 2 x 2 Corner

×5

Brick 2 x 2 Corner

×7

Tile, Modified 1 x 2 Grille with Bottom Groove

×4

Tile, Modified 1 x 2 Grille with Bottom Groove

×2

Tile, Modified 1 x 2 Grille with Bottom Groove

×26

Tile, Modified 1 x 2 Grille with Bottom Groove

Plate 2 x 2 Corner

×28

Plate 2 x 2 Corner

×4

Plate 2 x 2 Corner

×25

Plate 2 x 2 Corner

×20

Slope, Curved 2 x 1 x 2/3 Inverted

×8

Slope, Curved 2 x 1 x 2/3 Inverted

×2

Tile, Round 1 x 1 Half Circle Extended

×41

Slope, Curved 3 x 2

×10

Slope, Curved 3 x 2

×3

Tile 1 x 4

×6

Tile 1 x 4

×3

Technic, Axle 3L with Stop

×6

Plate 2 x 12

×3

Brick, Modified 1 x 2 with Pin

×2

Plate, Modified 2 x 2 with Pin on Bottom

×4

Plate, Round 2 x 2 with Rounded Bottom (Boat Stud)

×12

Wedge, Plate 2 x 2 Cut Corner

×8

Tile 2 x 3

×6

Tile 2 x 3

Brick, Modified 1 x 1 with Studs on 2 Sides, Adjacent

×3

Brick, Modified 1 x 1 with Studs on 2 Sides, Adjacent

×4

Tile, Modified Facet 2 x 2

×4

Technic, Pin with Short Friction Ridges

×75

Slope 45 2 x 1 with Cutout without Stud

×6

Slope 45 2 x 1 with Cutout without Stud

×6

Slope 45 2 x 1 with Cutout without Stud

×6

Vehicle, Mudguard 4 x 3 x 1 with Arch Curved

×4

Minifigure Neck Bracket with Back Stud - Thick Back Wall

Brick 2 x 4

×2

Brick 2 x 3

×2

Brick 2 x 3

×2

Brick 1 x 2

×19

Brick 1 x 2

×2

Brick 1 x 2

×20

Brick 1 x 2

×9

Brick 1 x 1

×9

Brick 1 x 1

×2

Brick 1 x 1

×12

Brick 2 x 8

Brick 1 x 6

×2

Brick 1 x 6

×3

Brick 1 x 6

×3

Brick 1 x 4

×12

Brick 1 x 4

×3

Brick 1 x 4

×2

Brick 1 x 4

×12

Plate 2 x 4

×14

Plate 2 x 4

×17

Plate 2 x 4

Plate 2 x 3

×12

Plate 2 x 3

×14

Plate 2 x 3

×2

Plate 2 x 3

×11

Plate 2 x 2

×3

Plate 2 x 2

×14

Plate 2 x 2

×5

Plate 2 x 2

×9

Plate 1 x 2

×43

Plate 1 x 2

×3

Plate 1 x 2

×19

Plate 1 x 2

×52

Plate 1 x 1

×77

Plate 1 x 1

×7

Plate 1 x 1

×4

Plate 1 x 1

×42

Plate 1 x 1

×19

Plate 6 x 12

×5

Plate 4 x 12

Plate 4 x 10

Plate 4 x 4

Plate 4 x 6

×4

Plate 4 x 6

×2

Plate 6 x 10

×2

Plate 2 x 8

×3

Plate 4 x 8

×2

Plate, Round Corner 3 x 3

Plate 6 x 8

×3

Slope 45 2 x 4

Bar 4L (Lightsaber Blade / Wand)

×2

Bar 4L (Lightsaber Blade / Wand)

×2

Slope 45 2 x 3

×9

Hinge Plate 1 x 2 Locking with 1 Finger on Top

×2

Slope 45 2 x 2

×17

Slope 45 2 x 1

×24

Slope 45 2 x 1

×24

Brick, Modified 1 x 4 with Studs on Side

×4

Slope 45 2 x 2 Double Convex Corner

×12

Wedge, Plate 4 x 4 Cut Corner

×2

Brick, Round 1 x 1

×4

Tile 2 x 2

×6

Tile 2 x 2

×2

Tile 2 x 2

×2

Tile 1 x 2

×16

Tile 1 x 2

×2

Tile 1 x 2

×9

Tile 1 x 2

×9

Tile 1 x 1

×5

Tile 1 x 1

×19

Tile 1 x 1

×11

Technic, Brick 1 x 2 with Holes

×4

Technic, Brick 1 x 2 with Holes

Technic, Pin 3/4

×5

Technic, Axle and Pin Connector Angled #1

Plate, Modified 1 x 2 with Door Rail

×2

Technic, Axle and Pin Connector Angled #2 - 180 degrees

×2

Technic, Axle Connector with Axle Hole

Technic, Pin 3L with Friction Ridges and Stop Bush

×9

Technic, Axle 2L Notched

×8

Technic, Brick 1 x 2 with Axle Hole

×6

Technic, Brick 1 x 2 with Axle Hole

×3

Technic, Axle 5L

×4

Technic, Liftarm, Modified Bent Thick L-Shape 2 x 4

×8

Technic, Axle and Pin Connector Perpendicular 3L with Center Pin Hole

×4

Technic, Axle and Pin Connector Perpendicular 3L with Center Pin Hole

×2

Technic, Axle and Pin Connector Perpendicular 3L with Center Pin Hole

×4

Technic, Axle 5.5L with Stop

×2

Technic, Liftarm Thick 1 x 15

×2

Technic, Liftarm Thick 1 x 15

×2

Technic, Axle and Pin Connector Perpendicular Double

×2

Technic, Liftarm Thick 1 x 5

×5

Technic, Liftarm Thin 1 x 4 - Axle Holes

×4

Brick 1 x 2 x 2 with Inside Stud Holder

×7

Technic, Liftarm Thick 1 x 3

×2

Technic, Liftarm Thick 1 x 3

×3

Technic, Liftarm Thick 1 x 7

×3

Technic, Liftarm Thick 1 x 7

×2

Technic, Liftarm Thick 1 x 11

×4

Technic, Liftarm Thick 1 x 11

×4

Technic, Liftarm Thick 1 x 11

×10

Technic, Liftarm, Modified Bent Thick L-Shape 3 x 5

×5

Slope, Curved 2 x 2 x 2/3 Inverted

×2

Slope 33 3 x 2

×2

Slope, Curved 3 x 1 x 2 with Hollow Stud

×8

Tile, Modified 2 x 2 with Studs on Edge

×16

Tile, Modified 2 x 2 with Studs on Edge

×6

Plate, Modified 1 x 3 with 2 Studs (Double Jumper)

×4

Plate 1 x 8

×6

Plate 1 x 8

×6

Plate 1 x 8

×4

Technic Driving Ring Extension with 8 Teeth Inside and Outside

×3

Plate, Round 1 x 2 with Open Studs

×2

Plate, Round 1 x 2 with Open Studs

×21

Tile, Modified 2 x 2 Triangular

Brick 1 x 3

×14

Brick 1 x 3

×6

Plate 1 x 3

×19

Plate 1 x 3

×12

Plate 1 x 3

×5

Slope, Inverted 45 2 x 2 with Flat Bottom Pin

×4

Plate 1 x 6

×6

Plate 1 x 6

×2

Plate 1 x 6

×9

Plate 1 x 6

×27

Technic, Pin without Friction Ridges

×18

Slope 65 2 x 2 x 2 with Bottom Tube

×2

Bracket 1 x 1 - 1 x 1 Inverted

×4

Bracket 1 x 1 - 1 x 1

×4

Technic, Brick 1 x 2 with Hole

×4

Technic, Brick 1 x 2 with Hole

×2

Technic, Brick 1 x 4 with Holes

×2

Technic, Brick 1 x 4 with Holes

×4

Technic, Axle 4L

Technic, Axle 6L

×2

Plate 1 x 4

×16

Plate 1 x 4

×4

Plate 1 x 4

×2

Plate 1 x 4

×3

Plate 1 x 4

×32

Slope, Curved 1 x 2 with Bottom Stud Holder

×8

Technic, Axle 1L with Pin without Friction Ridges with Round Hole

×2

Plate 2 x 6

×12

Plate 2 x 6

Plate 2 x 10

Technic, Brick 1 x 6 with Holes

×2

Plate 6 x 6

×2

Dish 4 x 4 Inverted (Radar) with Solid Stud

Technic, Liftarm, Modified Frame Thick 11 x 15 Open Center

×2

Plate, Round 2 x 2 with Axle Hole

×8

Technic, Liftarm Thick 1 x 9

×8

Brick, Modified 1 x 1 with Headlight

×8

Brick, Modified 1 x 1 with Headlight

×4

Plate, Round 1 x 1

×9

Plate, Round 1 x 1

×10

Plate, Round 1 x 1

×3

Plate, Modified 1 x 1 with Open O Clip Thick (Vertical Grip)

Technic, Liftarm Thick 1 x 13

×2

Tile 1 x 8

×4

Technic, Liftarm Thin 1 x 2 - Axle Holes

Bracket 2 x 2 - 1 x 2 Centered

×8

Plate, Modified 1 x 4 with 2 Studs with Groove

Wheel 11mm D. x 8mm with Center Groove, 4 Spokes

×3

Technic Bush 1/2 Smooth

×3

Technic Bush 1/2 Smooth

×7

Technic, Pin 1/2 without Friction Ridges

×43

Technic, Pin 1/2 without Friction Ridges

×4

Plate 2 x 16

Slope 33 3 x 1

×3

Technic, Axle 1L with Pin with Friction Ridges

×30

Wedge, Plate 3 x 2 Right

×2

Wedge, Plate 3 x 2 Left

×2

Hinge Plate 1 x 2 Locking with 2 Fingers on End

×2

Slope 45 2 x 8

×6

Bracket 1 x 2 - 2 x 2

×12

Plate 1 x 10

×4

Plate 1 x 10

×6

Plate, Modified 1 x 8 with Door Rail

×2

Technic, Axle 3L

×2

Technic, Axle 3L

×2

Cone 1 x 1 with Top Groove

×2

Cone 1 x 1 with Top Groove

Plate, Modified 1 x 2 with Bar Handle on Side - Closed Ends

Panel 1 x 2 x 1 with Rounded Corners

×8

Panel 1 x 2 x 1 with Rounded Corners

×4

Bar 1L with Clip Mechanical Claw - Cut Edges and Hole on Side

×2

Brick 1 x 4 x 3 with Number 50 and 'LUCASFILM Ltd' Pattern

Slope, Curved 3 x 1

×11

Slope, Curved 3 x 1

×6

Technic, Axle Connector Perpendicular 2 x 5 Bent

×2

Slope 30 1 x 1 x 2/3

×15

Slope 30 1 x 1 x 2/3

×14

Slope 30 1 x 1 x 2/3

×19

Bar with Light Cover (Bulb) / Bionicle Barraki Eye

×3

Wheel 31mm D. x 15mm Technic

×2

Plate, Round 4 x 4 with Hole

Brick, Modified 1 x 1 with Clip (Horizontal Grip)

×4

Plate, Modified 1 x 2 with Bar Handle on End

×2

Plate, Modified 1 x 2 with Bar Handle on End

×6

Plate 1 x 12

×7

Technic, Liftarm Thick 1 x 2 - Axle Hole

Technic, Liftarm, Modified T-Shape Thick 3 x 3

×2

Brick 1 x 10

Technic, Pin 1/2 with 2L Bar Extension (Flick Missile)

Plate, Modified 1 x 1 with Open O Clip (Horizontal Grip)

×2

Technic, Liftarm, Modified Crank / Pin 1 x 3 - Axle Holes and Squared Pin Hole

×2

Slope 18 2 x 1 x 2/3 with Grille

Turntable 4 x 4 Square Base, Locking

Slope, Curved 4 x 1

×12

Slope, Curved 4 x 1

×4

Slope, Curved 4 x 1

×16

Tile, Modified 6 x 12 with Studs on Edges

Slope, Curved 2 x 4 Double with Groove

×4

Panel 1 x 1 x 1 Corner

×8

Panel 1 x 1 x 1 Corner

Technic, Pin Connector Round 2L with Slot (Pin Joiner Round)

×6

Technic, Pin Connector Round 2L with Slot (Pin Joiner Round)

×4

Technic, Pin Connector Round 2L with Slot (Pin Joiner Round)

Tile 1 x 3

×3

Tile 1 x 3

×11

Plate, Modified 1 x 2 with Clip on End (Horizontal Grip)

×2

Bar 6L with Stop Ring

×2

Bar 6L with Stop Ring

Technic, Liftarm, Modified Frame Thick 5 x 7 Open Center

×2

Minifigure, Weapon Lightsaber Hilt Straight

×3

Minifigure, Utensil Telescope

×2

Plate, Modified 4 x 4 with 2 x 2 Open Center

Technic, Axle Connector 2L (Smooth with x Hole + Orientation)

×2

Technic, Brick 1 x 1 with Hole

Technic, Pin 3L with Friction Ridges

×37

Technic, Axle 3L with Stud

Technic, Pin with Friction Ridges and Tow Ball with Round Pin Hole

×6

Technic, Liftarm Thin 1 x 3 - Axle Holes

×16

Tile 1 x 6

×14

Tile 1 x 6

×2

Tile 1 x 6

×4

Brick, Round 4 x 4 with Recessed Center and Hole

×2

Tile 2 x 6

×10

Sticker Sheet for Set 75308 - (77289/6337139)

Minifigure, Shield Circular / Round Convex Face

Plate, Round 1 x 1 with Open Stud

×2

Plate, Round 1 x 1 with Open Stud

×9

Plate, Round 1 x 1 with Open Stud

×9

Plate, Round 1 x 1 with Open Stud

×3

Slope 30 1 x 2 x 2/3

×20

Slope 30 1 x 2 x 2/3

×2

Slope 30 1 x 2 x 2/3

×3

Tile 2 x 4

×2

Tile 2 x 4

×2

Brick, Modified 1 x 1 with Stud on Side

×4

Brick, Modified 1 x 1 with Stud on Side

×8

Panel 1 x 2 x 2 with Side Supports - Hollow Studs

×2

Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper)

×2

Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper)

×2

Slope, Curved 2 x 4 x 2/3 with Bottom Tubes

×12

Bar 1L with Top Stud and 2 Side Studs (Connector Perpendicular)

×2

Slope 45 2 x 1 with 2/3 Cutout

×8

Slope 45 2 x 1 with 2/3 Cutout

×3

Slope, Curved 4 x 1 x 2/3 Double

×7

Slope, Curved 4 x 2

×14

Brick and Axle Separator

Tile, Round 1 x 1

×7

Tile, Round 1 x 1

×3

Tile, Round 1 x 1

×3

Tile, Round 1 x 1

×13

Plate, Modified 2 x 2 x 2/3 with 2 Studs on Side

×6

Bracket 1 x 2 - 2 x 2 Inverted

×2

Bracket 1 x 2 - 1 x 2 Inverted

×2

Bracket 1 x 2 - 1 x 2

×16

Rubber Belt Small (Round Cross Section) - Approx. 2 x 2

×2

R2-D2

About R2-D2

Part-out value

Seller notes

Minifigures in R2-D2 (1)

Parts (355)

Common questions about R2-D2

How much is LEGO R2-D2 (75308-1) worth?

What minifigures come in LEGO set 75308-1?

Is it worth parting out LEGO R2-D2?

Is LEGO R2-D2 (75308-1) retired?

How do I check if my R2-D2 set is complete?

More Star Wars sets

Explore more

Company

Legal