About Inquisitor Transport Scythe
Inquisitor Transport Scythe (75336-1) is a LEGO Star Wars set from 2022 that sells for around $76.42 used on BrickLink. It includes 4 minifigures with a combined resale value of $53.25 — that's 70% of the set's price in figures alone. The most valuable is The Grand Inquisitor - Black Uniform at $19.67. For sellers buying complete sets to part out, the minifig value here makes this one worth considering.
Part-out value
Minifig value: $53.25 out of $76.42 total (70%). Over half the set's resale value is in the figures. Sellers parting this set out should list the minifigs individually on BrickLink — they'll earn more than bundling everything together.
Minifigures in Inquisitor Transport Scythe (4)
Parts (200)
Plate, Modified 2 x 2 with Pin Hole - Full Cross Support Underneath
Light Bluish Gray×4
Brick, Modified 1 x 2 with Studs on 1 Side
Black×2
Plate 3 x 3
Black×4
Bracket 5 x 2 x 1 1/3 with 2 Holes and Bottom Tube
Light Bluish Gray×4
Technic, Pin Connector Perpendicular 2 x 4 Bent
Black×4
Plate, Modified 1 x 2 with Pin Hole on Top
Black×4
Plate, Modified 1 x 2 with Pin Hole on Top
Dark Bluish Gray×2
Slope, Curved 2 x 1 x 2/3
Black×4
Slope, Curved 4 x 1 Inverted
Light Bluish Gray×2
Wedge, Plate 4 x 9 with Stud Notches
Black
Plate, Modified 1 x 2 with Tow Ball and Small Tow Ball Socket on Ends
Dark Bluish Gray×2
Slope, Curved 2 x 2 x 2/3
Tan×2
Slope, Curved 2 x 2 x 2/3
Black×2
Projectile Launcher, 1 x 4 Spring Shooter with Light Bluish Gray Top
Dark Bluish Gray×2
Projectile Arrow, Bar 8L with Round End (Spring Shooter Dart)
Trans-Red×3
Tile, Round 2 x 2 with Hole
Black×2
Helicopter Landing Ski 1 x 6 with Pin Hole {15625}
Dark Bluish Gray×4
Tile, Modified 1 x 1 with Open O Clip
Black×4
Technic, Liftarm Thick 1 x 1 (Spacer)
Dark Bluish Gray×3
Minifigure, Weapon Lightsaber Hilt Straight with Ring
Pearl Dark Gray×3
Plate, Modified 1 x 2 with Pin Hole on Bottom
Light Bluish Gray×6
Brick, Modified 1 x 2 x 1 2/3 with Studs on Side
Light Bluish Gray×2
Plate, Modified 1 x 2 with Tow Ball on End
Dark Bluish Gray×2
Technic, Axle and Pin Connector Hub with 1L Axle
Black×4
Tile, Modified 1 x 2 Grille with Bottom Groove
Black×20
Plate 2 x 2 Corner
Tan×2
Plate 2 x 2 Corner
Dark Tan×10
Slope, Curved 2 x 1 x 2/3 Inverted
Dark Bluish Gray×2
Wedge, Plate 2 x 2 Left
Black×6
Wedge, Plate 2 x 2 Left
Dark Bluish Gray
Wedge, Plate 2 x 2 Right
Black×6
Wedge, Plate 2 x 2 Right
Dark Bluish Gray
Tile 1 x 4
Black×13
Tile 1 x 4
Dark Bluish Gray×2
Plate 2 x 12
Black×5
Plate 2 x 12
Light Bluish Gray
Wedge, Plate 3 x 3 Cut Corner
Black×2
Wedge, Plate 3 x 3 Cut Corner
Light Bluish Gray×4
Plate, Round 2 x 2 with Rounded Bottom (Boat Stud)
Light Bluish Gray×8
Tile 2 x 3
Black×6
Tile, Modified Facet 2 x 2
Black×2
Technic, Brick 1 x 10 with Holes
Black×2
Technic, Pin with Short Friction Ridges
Black×34
Brick, Modified 1 x 2 with Grille / Fluted Profile
Black×3
Bracket 1 x 2 - 1 x 4 with Rounded Corners at the Bottom
Black×6
Brick 2 x 4
Black×2
Brick 2 x 2
Dark Bluish Gray
Plate, Modified 1 x 4 with Bar Arm Down
Light Bluish Gray×2
Brick 1 x 1
Black×6
Brick 1 x 8
Dark Bluish Gray×2
Plate 2 x 4
Black×17
Plate 2 x 3
Black×2
Plate 2 x 3
Dark Tan×2
Plate 2 x 3
Dark Bluish Gray×18
Plate 2 x 3
Light Bluish Gray×2
Plate 2 x 2
Dark Bluish Gray×12
Plate 2 x 2
Light Bluish Gray×2
Plate 1 x 2
Black×14
Plate 1 x 2
Dark Tan×18
Plate 1 x 2
Dark Bluish Gray×20
Plate 1 x 1
Yellow×3
Plate 1 x 1
Red×5
Plate 1 x 1
Dark Tan×3
Plate 1 x 1
Dark Bluish Gray×5
Plate 4 x 12
Black×2
Plate 4 x 4
Dark Bluish Gray×4
Plate 4 x 6
Light Bluish Gray×2
Plate 2 x 8
Blue×2
Plate 2 x 8
Black×5
Plate 2 x 8
Light Bluish Gray
Plate 4 x 8
Black×2
Tile, Modified 2 x 3 with 2 Open O Clips
Black×3
Wedge, Plate 12 x 6 Left
Black×2
Wedge, Plate 12 x 6 Right
Black×2
Bar 4L (Lightsaber Blade / Wand)
Trans-Light Blue
Bar 4L (Lightsaber Blade / Wand)
Trans-Red×6
Slope 45 2 x 1
Black×6
Panel 1 x 4 x 1
Black×4
Wedge, Plate 4 x 4 Cut Corner
Black×4
Brick, Round 1 x 1
Black×4
Brick, Round 1 x 1
Light Bluish Gray×8
Tile 2 x 2
Black×6
Tile 1 x 2
Black×10
Tile 1 x 2
Dark Bluish Gray×4
Tile 1 x 1
Black×14
Technic, Brick 1 x 14 with Holes
Black×2
Plate, Modified 1 x 2 with Door Rail
Black×10
Technic, Pin 3L with Friction Ridges and Stop Bush
Light Bluish Gray×4
Technic, Liftarm Thick 1 x 3
Dark Bluish Gray×2
Slope, Curved 2 x 2 x 2/3 Inverted
Black×2
Slope, Curved 2 x 2 x 2/3 Inverted
Light Bluish Gray×8
Bar 1L with 1 x 1 Round Plate with Hollow Stud
Black×3
Tile, Modified 2 x 2 with Studs on Edge
Black×6
Tile, Modified 2 x 2 with Studs on Edge
Dark Bluish Gray
Plate, Modified 1 x 3 with 2 Studs (Double Jumper)
Black×3
Plate 1 x 8
Dark Bluish Gray×2
Technic Driving Ring Extension with 8 Teeth Inside and Outside
Black×2
Plate, Round 1 x 2 with Open Studs
Dark Bluish Gray×3
Tile, Modified 2 x 2 Triangular
Black×6
Brick 1 x 3
Tan×2
Brick 1 x 3
Black×2
Plate 1 x 3
Yellow×2
Plate 1 x 3
Black×4
Plate 1 x 3
Dark Bluish Gray×2
Plate 1 x 3
Light Bluish Gray×8
Plate 1 x 6
Black×11
Plate 1 x 6
Light Bluish Gray×2
Bracket 1 x 1 - 1 x 1 Inverted
Dark Bluish Gray×2
Bracket 1 x 1 - 1 x 1
Light Bluish Gray×2
Slope 75 2 x 2 x 3 - Solid Studs
Dark Bluish Gray×2
Technic, Brick 1 x 4 with Holes
Light Bluish Gray×2
Technic, Plate 2 x 4 with 3 Holes
Dark Bluish Gray×4
Plate 1 x 4
Black
Plate 1 x 4
Dark Bluish Gray×24
Plate 2 x 6
Black×4
Plate 2 x 6
Light Bluish Gray×2
Plate 2 x 10
Black×2
Plate 2 x 10
Dark Bluish Gray×4
Technic, Brick 1 x 12 with Holes
Dark Bluish Gray×4
Plate 6 x 6
Dark Bluish Gray×2
Plate, Round 2 x 2 with Axle Hole
Dark Bluish Gray×4
Plate, Round 1 x 1
Black×3
Minifigure, Utensil Seat / Chair 2 x 2
Dark Bluish Gray×2
Tile 1 x 8
Black×8
Plate, Modified 1 x 4 with 2 Studs with Groove
Black×2
Plate, Modified 1 x 4 with 2 Studs with Groove
Dark Bluish Gray×2
Wedge, Plate 4 x 2 Right
Black×8
Wedge, Plate 4 x 2 Left
Black×8
Technic, Pin 1/2 without Friction Ridges
Light Bluish Gray×5
Plate 2 x 16
Black×2
Hinge Plate 2 x 4 with Pin Hole and 2 Holes - Top
Black×6
Hinge Plate 2 x 4 with Pin Hole and 2 Holes - Bottom
Black×14
Technic, Axle 1L with Pin with Friction Ridges
Blue×2
Hinge Plate 1 x 2 Locking with 1 Finger on Side without Bottom Groove
Light Bluish Gray×4
Hinge Plate 3 x 4 Locking Dual 2 Fingers
Dark Bluish Gray×2
Bracket 1 x 2 - 2 x 2
Tan×10
Plate 1 x 10
Black×6
Plate 1 x 10
Light Bluish Gray×2
Plate, Modified 1 x 2 with Open O Clip on Top
Black×4
Plate, Modified 1 x 8 with Door Rail
Black×2
Dish 2 x 2 Inverted (Radar)
Trans-Light Blue×2
Slope, Curved 2 x 2 x 2/3 with 2 Studs and Curved Sides
Dark Bluish Gray
Wedge, Plate 6 x 4 Right
Black×2
Wedge, Plate 6 x 4 Left
Black×2
Plate, Modified 1 x 2 with Bar Handle on Side - Closed Ends
Black×2
Plate, Modified 1 x 2 with Bar Handle on Side - Closed Ends
Dark Bluish Gray×2
Slope, Inverted 45 4 x 2 Double with 2 x 2 Cutout
Black
Wedge, Plate 8 x 3 Pentagonal Right
Black
Wedge, Plate 8 x 3 Pentagonal Left
Black
Wedge, Plate 2 x 4
Black×2
Slope 30 1 x 1 x 2/3
Black×12
Wedge, Plate 6 x 3 Right
Black×3
Wedge, Plate 6 x 3 Left
Black×3
Plate, Modified 1 x 2 with 2 Open O Clips (Horizontal Grip)
Light Bluish Gray×2
Plate, Modified 1 x 2 with Bar Handle on End
Black×14
Plate 1 x 12
Dark Bluish Gray×2
Plate 1 x 12
Light Bluish Gray×2
Slope 65 2 x 1 x 2
Light Bluish Gray×2
Slope, Curved 2 x 1 x 1 1/3 with Recessed Stud
Dark Bluish Gray×10
Brick 1 x 12
Black×2
Slope 18 2 x 1 x 2/3 with Grille
Black×2
Tile, Modified 4 x 6 with Studs on Edges
Black×5
Cone 3 x 3 x 2
Black×2
Technic, Pin Connector Round 2L with Slot (Pin Joiner Round)
Black×4
Tile 1 x 3
Black×22
Plate, Modified 1 x 2 with Clip on End (Horizontal Grip)
Dark Bluish Gray×2
Bar 6L with Stop Ring
Black×4
Minifigure, Weapon Lightsaber Hilt Straight
Black×3
Minifigure, Weapon Lightsaber Hilt Straight
Metallic Silver×2
Technic, Pin 3L with Friction Ridges
Blue×6
Windscreen 6 x 6 x 1 1/3 Straight Sides with Black Window Frame Outline and Roof Pattern
Trans-Red
Tile, Modified 4 x 4 with Studs on Edges and 2 Open O Clips (Horizontal Grip)
Black×3
Tile 1 x 6
Black×6
Tile 2 x 6
Black×10
Technic, Brick Modified 1 x 2 with Hole and 1 x 2 Plate
Light Bluish Gray×2
Brick, Round 3 x 3 x 2 with Recessed Center and Axle Hole
Black×2
Bracket 3 x 2 x 1 1/3 with Bottom Stud Holder
Dark Bluish Gray×4
Bracket 1 x 1 - 1 x 2 Inverted
Dark Bluish Gray×2
Sticker Sheet for Set 75336 - (10100892/6413118)
(Not Applicable)
Bracket 5 x 2 x 2 1/3 with 2 Holes and Bottom Stud Holder
Black×4
Plate 1 x 5
Black×4
Plate, Round 1 x 1 with Open Stud
Dark Bluish Gray×7
Slope 30 1 x 2 x 2/3
Black
Slope 30 1 x 2 x 2/3 with Red, White, and Silver Buttons, Dark Red Screens Pattern
Dark Bluish Gray
Tile 2 x 4
Black×23
Bar 3L (Bar Arrow)
Black×3
Tile, Modified 3 x 4 with 4 Studs in Center
Black
Plate 2 x 14
Light Bluish Gray×2
Slope 45 2 x 1 with 2/3 Cutout
Black×4
Slope, Curved 4 x 1 x 2/3 Double
Black×4
Slope, Curved 4 x 1 x 2/3 Double
Light Bluish Gray×2
Bracket 1 x 2 - 2 x 4
Light Bluish Gray×2
Brick and Axle Separator
Orange
Tile, Round 1 x 1
Dark Bluish Gray×3
Vehicle, Spoiler with Bar Handle
Black×2
Bracket 1 x 2 - 2 x 2 Inverted
Black×12
Minifigure, Utensil Ingot 1 x 2
Pearl Dark Gray×8
Minifigure, Utensil Ingot 1 x 2
Dark Bluish Gray×2
Bracket 1 x 2 - 1 x 2 Inverted
Dark Bluish Gray×8
Bracket 1 x 2 - 1 x 2
Light Bluish Gray×4Common questions about Inquisitor Transport Scythe
How much is LEGO Inquisitor Transport Scythe (75336-1) worth?
Inquisitor Transport Scythe sells for an average of $76.42 used and $96.30 new/sealed on BrickLink based on 6 months of completed sales. As a retired set, prices tend to hold steady or appreciate over time, especially for complete sets with original packaging. Actual prices vary with completeness — missing minifigures or key parts will lower the value.
What minifigures come in LEGO set 75336-1?
This set includes 4 minifigures: The Grand Inquisitor - Black Uniform ($19.67), Imperial Inquisitor Fifth Brother - Black Uniform ($14.97), Ben Kenobi ($8.71), Reva (Third Sister), Inquisitor ($9.90). The minifigures have a combined BrickLink value of $53.25. Each figure is linked above with individual pricing if you're looking to buy or sell specific characters.
Is it worth parting out LEGO Inquisitor Transport Scythe?
The minifigures alone are worth $53.25 (70% of the $76.42 set price), so parting out the figs individually on BrickLink can be profitable. Start with The Grand Inquisitor - Black Uniform at $19.67 — it's the highest-value figure in the set.
Is LEGO Inquisitor Transport Scythe (75336-1) retired?
Yes, Inquisitor Transport Scythe was released in 2022 and has been retired from retail for several years. Retired LEGO sets are only available on the secondary market through BrickLink, eBay, or other resale platforms.
How do I check if my Inquisitor Transport Scythe set is complete?
Use the parts list on this page to check every piece and all 4 minifigures. For the minifigures specifically, you can use the brick'em scanner to identify each figure from a photo and confirm it matches what should be in this set. Missing pieces can be individually sourced on BrickLink.