How much is LEGO Ambush on Ferrix (75338-1) worth?

Ambush on Ferrix sells for an average of $64.69 used and $78.40 new/sealed on BrickLink based on 6 months of completed sales. As a retired set, prices tend to hold steady or appreciate over time, especially for complete sets with original packaging. Actual prices vary with completeness. Missing minifigures or key parts will lower the value.

What minifigures come in LEGO set 75338-1?

This set includes 3 minifigures: Luthen Rael ($17.71), Cassian Andor - Dark Brown Jacket ($13.05), Pre-Mor Security Deputy Inspector Syril Karn ($13.24). The minifigures have a combined BrickLink value of $44.00. Each figure is linked above with individual pricing if you're looking to buy or sell specific characters.

Is it worth parting out LEGO Ambush on Ferrix?

The minifigures alone are worth $44.00 (68% of the $64.69 set price), so parting out the figs individually on BrickLink can be profitable. Start with Luthen Rael at $17.71. It's the highest-value figure in the set.

Is LEGO Ambush on Ferrix (75338-1) retired?

Yes, Ambush on Ferrix was released in 2022 and has been retired from retail for several years. Retired LEGO sets are only available on the secondary market through BrickLink, eBay, or other resale platforms.

How do I check if my Ambush on Ferrix set is complete?

Use the parts list on this page to check every piece and all 3 minifigures. For the minifigures specifically, you can use the brick'em scanner to identify each figure from a photo and confirm it matches what should be in this set. Missing pieces can be individually sourced on BrickLink.

Ambush on Ferrix

75338-1·Star Wars·2022·3 minifigs·215 parts

Used Avg

$64.69

New Avg

$78.40

Add to your inventory Scan the minifigs

About Ambush on Ferrix

Ambush on Ferrix (75338-1) is a LEGO Star Wars set from 2022 that sells for around $64.69 used on BrickLink. It includes 3 minifigures with a combined resale value of $44.00, or 68% of the set's price in figures alone. The most valuable is Luthen Rael at $17.71. For sellers buying complete sets to part out, the minifig value here makes this one worth considering.

Parts (215)

Plate, Modified 2 x 2 with Pin Hole - Full Cross Support Underneath

Tile, Modified 2 x 2 Inverted

×2

Brick, Modified 1 x 2 with Studs on 1 Side

Plate 3 x 3

×6

Technic, Axle 1L with Pin 2L with Friction Ridges

×2

Slope, Curved 2 x 1 x 2/3

×2

Cone 1 x 1 Inverted with Bar

Plate, Round 4 x 4 with 2 x 2 Round Open Center

×2

Wheel 18mm D. x 8mm with Fake Bolts and Deep Spokes with Inner Ring

×2

Tile 2 x 2 Corner

×2

Tile, Round 2 x 2 with Bottom Stud Holder

×2

Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)

×4

Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)

×2

Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)

×10

Tile, Modified 1 x 1 with Open O Clip

×3

Tile, Modified 1 x 1 with Open O Clip

×2

Technic, Axle 2L with Pin with Friction Ridges

Technic, Liftarm Thick 1 x 1 (Spacer)

×2

Technic, Liftarm Thick 1 x 1 (Spacer)

×2

Plate, Modified 1 x 2 with Pin Hole on Bottom

×16

Tile, Round 1 x 1 with Bar and Small Pin Hole

×3

Tile, Modified 2 x 3 Pentagonal

×6

Bar Holder with Handle

Tile, Modified 1 x 2 Grille with Bottom Groove

×9

Tile, Modified 1 x 2 Grille with Bottom Groove

Wedge, Plate 3 x 6 Cut Corners

×2

Slope, Curved 2 x 1 x 2/3 Inverted

×4

Slope, Curved 2 x 1 x 2/3 Inverted

Wedge, Plate 2 x 2 Left

×4

Wedge, Plate 2 x 2 Right

×4

Tile 1 x 4

×2

Slope, Inverted 75 2 x 1 x 3

×2

Brick, Round 2 x 2 Dome Bottom with Studs

×2

Tile, Round 1 x 1 Quarter

×3

Plate, Round 2 x 2 with Rounded Bottom (Boat Stud)

×2

Wedge, Plate 2 x 2 Cut Corner

×4

Wedge, Plate 2 x 2 Cut Corner

×2

Tile 2 x 3

×5

Tile, Modified Facet 2 x 2

×2

Tile, Modified Facet 2 x 2

×4

Technic, Brick 1 x 10 with Holes

×2

Technic, Axle 1L with Tow Ball

×2

Technic, Pin with Short Friction Ridges

×42

Tile, Round Corner 2 x 2 Macaroni

×8

Bracket 1 x 2 - 1 x 4 with Rounded Corners at the Bottom

×2

Bracket 1 x 2 - 1 x 4 with Rounded Corners at the Bottom

×2

Wedge 2 x 1 x 2/3 Right

Wedge 2 x 1 x 2/3 Left

Minifigure, Utensil Handlebars

Brick 1 x 2

Brick, Modified 1 x 2 with Log Profile

×5

Plate, Modified 2 x 3 Inverted with 4 Studs and Bar Handle on Bottom (Rocker Plate)

Plate 2 x 4

×2

Plate 2 x 4

×11

Plate 2 x 4

×2

Plate 2 x 3

×6

Plate 2 x 3

×4

Plate 2 x 3

×2

Plate 2 x 2

×2

Plate 2 x 2

×2

Plate 2 x 2

×2

Plate 1 x 2

×3

Plate 1 x 2

×10

Plate 1 x 2

×11

Plate 1 x 2

Plate 4 x 4

×3

Plate 6 x 8

Brick, Round 1 x 1

Tile 2 x 2

×3

Tile 2 x 2

×2

Tile 1 x 2

×9

Tile 1 x 1

×5

Technic, Brick 1 x 2 with Holes

×6

Technic, Brick 1 x 14 with Holes

×2

Plate, Modified 1 x 2 with Door Rail

×2

Plate, Modified 1 x 2 with Door Rail

×6

Plate, Modified 1 x 2 with Door Rail

×3

Technic, Pin 3L with Friction Ridges and Stop Bush

×4

Technic, Axle 2L Notched

Technic, Brick 1 x 2 with Axle Hole

×2

Technic, Liftarm, Modified Bent Thick L-Shape 2 x 4

×4

Technic, Liftarm, Modified Bent Thick L-Shape 3 x 5

×4

Slope, Curved 2 x 2 x 2/3 Inverted

×8

Bar 1L with 1 x 1 Round Plate with Hollow Stud

×3

Tile, Modified 2 x 2 with Studs on Edge

×4

Tile, Modified 2 x 2 with Studs on Edge

×4

Tile, Modified 2 x 2 with Studs on Edge

×2

Plate, Modified 1 x 3 with 2 Studs (Double Jumper)

×2

Technic Driving Ring Extension with 8 Teeth Inside and Outside

×2

Tile, Modified 1 x 3 Inverted with Hole

×2

Plate, Round 1 x 2 with Open Studs

×2

Plate, Round 1 x 2 with Open Studs

×4

Plate, Round 1 x 2 with Open Studs

×2

Plate, Round 1 x 2 with Open Studs

×2

Container, Box 2 x 2 x 1 - Top Opening with Flat Inner Bottom

Plate 1 x 3

×4

Plate 1 x 3

×4

Slope, Inverted 45 2 x 2 with Flat Bottom Pin

×2

Slope, Inverted 45 2 x 1

×2

Plate 1 x 6

×2

Plate 1 x 6

×12

Bracket 1 x 1 - 1 x 1 Inverted

×2

Plate 1 x 4

×4

Plate 1 x 4

×5

Minifigure, Utensil Candle

Plate 2 x 6

×3

Plate 2 x 6

×4

Hinge Brick 1 x 2 Base

Plate, Round 2 x 2 with Axle Hole

×2

Plate, Round 2 x 2 with Axle Hole

×2

Plate, Round 2 x 2 with Axle Hole

×4

Plate, Round 1 x 1

×11

Plate, Round 1 x 1

×8

Plate, Round 1 x 1

×6

Minifigure, Utensil Seat / Chair 2 x 2

Cylinder 4 x 4 x 1 2/3 with Pin Holes and Center Bar

×4

Plate, Modified 1 x 4 with 2 Studs with Groove

×2

Wedge, Plate 4 x 2 Right

×3

Wedge, Plate 4 x 2 Left

×3

Technic, Pin 1/2 without Friction Ridges

×3

Technic, Liftarm Thick 1 x 2

×4

Hinge Plate 1 x 2 Locking with 2 Fingers on End

×2

Hinge Plate 1 x 2 Locking with 1 Finger on Side without Bottom Groove

×2

Slope 75 2 x 1 x 3 - Hollow Stud

×2

Bracket 1 x 2 - 2 x 2

×4

Plate, Modified 1 x 2 with Open O Clip on Top

Brick, Modified 1 x 2 with Pin and Bottom Stud Holder

×4

Technic, Axle 3L

×3

Brick, Modified 1 x 2 x 2/3 with Studs on Sides and Extended Stud Receptacle

Tap 1 x 1 without Hole in Nozzle End

×2

Wedge, Plate 6 x 4 Right

×2

Wedge, Plate 6 x 4 Left

×2

Bar 1L with Clip Mechanical Claw - Cut Edges and Hole on Side

×3

Technic, Pin Connector Perpendicular 3L with 4 Pins

×2

Slope, Curved 1 x 1 x 2/3 Double

×4

Brick, Modified 1 x 2 with Studs on 2 Sides

Slope 30 1 x 1 x 2/3

×3

Wedge, Plate 6 x 3 Right

×3

Wedge, Plate 6 x 3 Left

×3

Wheel 18mm D. x 14mm with Pin Hole, Fake Bolts and Shallow Spokes

×2

Plate, Modified 1 x 2 with 2 Open O Clips (Horizontal Grip)

Plate, Round 4 x 4 with Hole

×5

Plate, Modified 1 x 2 with Bar Handle on End

×2

Plate 1 x 12

×2

Technic, Pin 1/2 with 2L Bar Extension (Flick Missile)

×2

Plate, Modified 1 x 1 with Open O Clip (Horizontal Grip)

×2

Hinge Brick 2 x 2 Top Plate

Slope 18 2 x 1 x 2/3 with Grille

×2

Turntable 4 x 4 Square Base, Locking

Tile, Modified 4 x 4 with Studs on Edge

×2

Tile, Modified 4 x 6 with Studs on Edges

×6

Brick, Round 4 x 4 with 4 Side Pin Holes and Center Axle Hole

×4

Technic, Pin Connector Round 2L with Slot (Pin Joiner Round)

Minifigure, Weapon Gun, Pistol Automatic Medium Barrel

Tile 1 x 3

×6

Plate, Modified 1 x 2 with Clip on End (Horizontal Grip)

×2

Bar 6L with Stop Ring

×2

Wedge, Plate 4 x 2 Right, Pointed

×3

Wedge, Plate 4 x 2 Left, Pointed

×3

Plate, Modified 2 x 4 with 2 Studs (Double Jumper)

Technic, Pin 3L with Friction Ridges

×10

Windscreen 6 x 6 x 1 1/3 Straight Sides with Dark Bluish Gray Window Frame Outline and Light Bluish Gray Roof with 4 Dots Pattern

Technic, Brick 2 x 6 x 1 1/3 with Axle Holes and Bottom Pins

Tile 1 x 6

×3

Minifigure, Weapon Hilt Smooth Extended

×2

Brick, Modified 1 x 2 x 1 2/3 with Studs on Side and Ends

Tile 2 x 6

×2

Projectile Launcher, 1 x 2 Mini Blaster / Tile Shooter

×2

Projectile Launcher Part, Trigger for Bazooka, Mini Blaster / Shooter

×3

Technic, Brick Modified 1 x 2 with Hole and 1 x 2 Plate

×4

Technic, Liftarm, Modified Perpendicular Holes Thick 1 x 11

×4

Sticker Sheet for Set 75338 - (10100770/6410559)

Bar 2L with Stop Ring

×2

Bar 2L with Stop Ring

×3

Wedge, Plate 6 x 2 Left

×2

Wedge, Plate 6 x 2 Right

×2

Plate, Round 1 x 1 with Open Stud

×2

Plate, Round 1 x 1 with Open Stud

×2

Plate, Round 1 x 1 with Open Stud

×7

Slope 30 1 x 2 x 2/3

×2

Slope 30 1 x 2 x 2/3

×12

Tile 2 x 4

×2

Technic, Axle 4L with Stop

Technic, Gear 20 Tooth Bevel with Pin Hole

×2

Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper)

×2

Minifigure, Weapon Whip Bent Flexible

×2

Technic, Pin 1/2 with Friction Ridges

×5

Plate, Modified 4 x 6 with Trap Door Hinge (Long Pins)

Minifigure, Weapon Gun, Blaster SW Small with Scope

×2

Minifigure, Weapon Gun, Two Barrel Pistol - 10-Rib Top Barrel

Brick and Axle Separator

Tile, Round 1 x 1

×3

Tile, Round 1 x 1

×9

Plate, Modified 2 x 2 x 2/3 with 2 Studs on Side

×3

Plate, Modified 2 x 2 x 2/3 with 2 Studs on Side

×2

Bracket 1 x 2 - 2 x 2 Inverted

×2

Minifigure, Utensil Ingot 1 x 2

×14

Bracket 1 x 2 - 1 x 2 Inverted

×4

Bracket 1 x 2 - 1 x 2

×2

Bracket 1 x 2 - 1 x 2

×6

Ambush on Ferrix

About Ambush on Ferrix

Part-out value

Minifigures in Ambush on Ferrix (3)

Parts (215)

Common questions about Ambush on Ferrix

How much is LEGO Ambush on Ferrix (75338-1) worth?

What minifigures come in LEGO set 75338-1?

Is it worth parting out LEGO Ambush on Ferrix?

Is LEGO Ambush on Ferrix (75338-1) retired?

How do I check if my Ambush on Ferrix set is complete?

More Star Wars sets

Explore more

Company

Legal