How much is LEGO SMART Play™: Darth Vader's TIE Fighter™ (75421-1) worth?

SMART Play™: Darth Vader's TIE Fighter™ sells for an average of $59.99 used and $80.15 new/sealed on BrickLink based on 6 months of completed sales. Current retail availability may affect secondary market prices. Actual prices vary with completeness. Missing minifigures or key parts will lower the value.

What minifigures come in LEGO set 75421-1?

This set includes 2 minifigures: Rebel Fleet Trooper - Male, Vest with Pockets, Black Neck, Reddish Brown Eyebrows ($2.91), Darth Vader™ - SMART Play™. The minifigures have a combined BrickLink value of $2.91. Each figure is linked above with individual pricing if you're looking to buy or sell specific characters.

Is it worth parting out LEGO SMART Play™: Darth Vader's TIE Fighter™?

The minifigures make up about 5% of the set value ($2.91 out of $59.99). Most of the value is in the complete set package, so selling it whole is likely the better move unless you have buyers lined up for specific figures.

Is LEGO SMART Play™: Darth Vader's TIE Fighter™ (75421-1) retired?

SMART Play™: Darth Vader's TIE Fighter™ was released in 2026. It should still be widely available at retail from LEGO and authorized retailers.

How do I check if my SMART Play™: Darth Vader's TIE Fighter™ set is complete?

Use the parts list on this page to check every piece and all 2 minifigures. For the minifigures specifically, you can use the brick'em scanner to identify each figure from a photo and confirm it matches what should be in this set. Missing pieces can be individually sourced on BrickLink.

SMART Play™: Darth Vader's TIE Fighter™

75421-1·Star Wars·2026·2 minifigs·166 parts

Used Avg

$59.99

New Avg

$80.15

Add to your inventory Scan the minifigs

About SMART Play™: Darth Vader's TIE Fighter™

SMART Play™: Darth Vader's TIE Fighter™ (75421-1) is a LEGO Star Wars set released in 2026, currently averaging $59.99 used on BrickLink. It comes with 2 minifigures worth a combined $2.91. It may still be available at retail from LEGO or authorized retailers. The full parts inventory runs 166 pieces.

Parts (166)

SMART Tag Tile 2 x 2 with SW Darth Vader's TIE Fighter Pattern

Electric SMART Brick Charger

Brick, Modified 1 x 2 with Studs on 1 Side

×2

Plate, Round 6 x 6 with Hole

Technic, Axle 1L with Pin 2L with Friction Ridges

Slope, Curved 2 x 1 x 2/3

×2

Electric, Cable USB for SMART Charger, Male USB-A to Male USB-C (Length 1m / 3ft)

Slope, Curved 4 x 1 Inverted

×2

Slope, Curved 4 x 1 Inverted

×8

Minifigure, Weapon Gun, Blaster 1 x 2 x 2/3 with Studs on Sides and Handle

Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)

Tile, Modified 1 x 1 with Open O Clip

×2

Tile, Round 1 x 2 Half

×2

Tile, Round 1 x 2 Half

×3

Tile, Round 1 x 2 Half

×4

Slope, Curved 2 x 2 Inverted with 2 Recessed Studs

×2

Technic, Liftarm Thick 1 x 1 (Spacer)

×4

Dish 6 x 6 Inverted with Bar Handle with SW 8 Spoke Dark Silver and Black Frame TIE Fighter / Interceptor Cockpit Pattern

Plate, Round Corner 2 x 6 Double

×2

Minifigure Neck Collar SW Darth Vader Helmet Lower Jaw

Tile, Round 1 x 1 with Bar and Small Pin Hole

×3

Slope, Inverted 45 6 x 2 Double with 2 x 4 Cutout

Slope, Inverted 45 2 x 1 with 2/3 Cutout

×4

Slope, Inverted 45 2 x 1 with 2/3 Cutout

×8

Minifigure, Utensil Book Cover

Tile, Modified 1 x 2 Grille with Bottom Groove

×2

Tile, Modified 1 x 2 Grille with Bottom Groove

Plate 2 x 2 Corner

×2

Wedge, Plate 2 x 2 Left

×8

Wedge, Plate 2 x 2 Right

×8

Tile 1 x 4

×2

Plate 2 x 12

×4

Minifigure, Visor Standard

Plate, Modified 1 x 2 with Bar Handle on Side - Free Ends

Tile, Modified Facet 2 x 2

×4

Tile, Modified Facet 2 x 2

×4

Tile, Round Corner 4 x 4 Macaroni

×2

Technic, Pin with Short Friction Ridges

×6

Hose, Flexible 22L with 2 Connector Ends (Zipline)

Slope 45 2 x 1 with Cutout without Stud

×4

Bracket 1 x 2 - 1 x 4 with Rounded Corners at the Bottom

Brick 1 x 4

Plate 2 x 4

×2

Plate 2 x 4

×5

Plate 2 x 3

×2

Plate 2 x 3

×4

Plate 2 x 3

×6

Plate 2 x 3

Plate 2 x 2

×4

Plate 1 x 2

×2

Plate 1 x 2

×14

Plate 1 x 2

×2

Bar 4L (Lightsaber Blade / Wand)

Slope 45 2 x 2 with Dark Blue Sonar Screen Pattern

Wedge, Plate 4 x 4 Cut Corner

Plate, Round Corner 4 x 4

×2

Brick, Round 1 x 1

Tile 1 x 2

×3

Tile 1 x 2 with SW Dark Red Target Screen, Dark Red and Silver Buttons Pattern

Tile 1 x 1

×5

Plate, Modified 2 x 3 with Hole

Technic, Brick 1 x 2 with Holes

×2

Plate, Modified 1 x 2 with Door Rail

×16

Technic, Axle Connector with Axle Hole

×2

Wedge, Plate 4 x 6 Cut Corners

Technic, Axle and Pin Connector Perpendicular 3L with Center Pin Hole

Technic, Liftarm Thick 1 x 5

×2

Plant Plate, Round 1 x 1 with 3 Layered Leaves

×3

Slope, Curved 2 x 2 x 2/3 Inverted

×2

Brick, Modified 1 x 1 x 1 2/3 with Studs on Side

×4

Tile, Modified 2 x 2 with Studs on Edge

Plate, Modified 1 x 3 with 2 Studs (Double Jumper)

×2

Turntable 2 x 2 Plate, Top

Turntable 2 x 2 Plate, Base

Bracket 1 x 1 - 1 x 1 Inverted

×2

Technic, Brick 1 x 2 with Hole

×4

Technic, Axle 6L

Plate 1 x 4

×2

Plate 1 x 4

×3

Slope, Curved 1 x 2 with Bottom Stud Holder

Plate 2 x 6

×5

Plate 2 x 6

Plate 2 x 10

×4

Hinge Brick 1 x 2 Base

Brick, Round 2 x 2 with Axle Hole

Plate, Round 2 x 2 with Axle Hole

×3

Plate, Round 2 x 2 with Axle Hole

×2

Plate, Round 2 x 2 with Axle Hole

×2

Plate, Round 1 x 1

×9

Plate, Round 1 x 1

×7

Plate, Round 1 x 1

×9

Minifigure, Utensil Seat / Chair 2 x 2

Bar 1 x 4 x 2 with Open Studs

Plate, Modified 1 x 4 with 2 Studs with Groove

×3

Plate, Modified 2 x 2 x 2/3 with 2 Studs on Side - Hollow Bottom Tube

×20

Technic, Axle 1L with Pin with Friction Ridges

Wedge 4 x 2 Triple Left

×2

Wedge 4 x 2 Triple Right

×2

Dish 3 x 3 Inverted (Radar)

Bracket 1 x 2 - 2 x 2

×2

Plate, Modified 1 x 8 with Door Rail

×4

Technic, Axle Connector Double - Flexible Rubber

Wedge, Plate 4 x 6

×2

Plate, Modified 1 x 2 with Bar Handle on Side - Closed Ends

×2

Plate, Modified 1 x 2 with Bar Handle on Side - Closed Ends

×2

Plate, Modified 1 x 2 with Bar Handle on Side - Closed Ends

×8

Slope, Curved 1 x 1 x 2/3 Double

×2

Slope, Curved 1 x 1 x 2/3 Double

×8

Electric, SMART Brick 2 x 4 x 1 2/3 with Trans-Clear Top

Bracket 5 x 1 x 1 1/3

×2

Minifigure, Weapon Gun, Blaster SW Standard

Slope, Curved 2 x 2 x 2/3 Corner Round

×4

Plate, Modified 1 x 2 with 2 Open O Clips (Horizontal Grip)

×8

Plate, Modified 1 x 2 with 2 Open O Clips (Horizontal Grip)

Slope 65 2 x 1 x 2

×2

Hinge Brick 2 x 2 Top Plate

Tile, Modified 4 x 4 with Studs on Edge

×2

Cone 3 x 3 x 2

Minifigure, Weapon Lightsaber Hilt Straight

×2

Minifigure, Weapon Lightsaber Hilt Straight

×2

Plate, Modified 4 x 4 with 2 x 2 Open Center

×7

Wedge, Plate 4 x 2 Right, Pointed

×4

Wedge, Plate 4 x 2 Left, Pointed

×4

Bar 1L with Angled Hollow Stud

×2

Technic, Pin 3L with Friction Ridges

×2

Tile 2 x 6

×12

Projectile Launcher, 1 x 2 Mini Blaster / Tile Shooter

×2

Projectile Launcher Part, Trigger for Bazooka, Mini Blaster / Shooter

×3

Brick, Modified 2 x 2 x 2/3 Ribbed with Axle Hole

Technic, Brick Modified 1 x 2 with Hole and 1 x 2 Plate

×2

Technic, Brick Modified 1 x 2 with Hole and 1 x 2 Plate

×2

Brick, Round 3 x 3 x 2 with Recessed Center and Axle Hole

Bracket 1 x 1 - 1 x 2 Inverted

×4

Minifigure, Utensil Tool Sledgehammer (Mjolnir, Hammer)

Bracket 5 x 2 x 2 1/3 with 2 Holes and Bottom Stud Holder

×2

Plate 3 x 3 Corner

Plate, Round 1 x 4 with 2 Open Studs

×6

Technic, Axle 1L with Oval Panel / Paddle

×2

Plate, Modified 1 x 2 with Clip on End (Vertical Grip)

×4

Plate, Modified 1 x 2 with Clip on End (Vertical Grip)

×4

Bar 2L with Stop Ring

×2

Bracket 5 x 2 x 1 1/3 with 2 Holes and Bottom Stud Holder

×4

Slope, Curved 1 x 4 x 2/3 Double

×8

Plate, Round Corner 5 x 5 Macaroni

×2

Plate, Round 1 x 1 with Open Stud

×3

Slope 30 1 x 2 x 2/3

Slope 30 1 x 2 x 2/3 with Red, White, and Silver Buttons, Dark Red Screens Pattern

Brick, Modified 1 x 1 x 2/3 with Open Stud

×2

Tile 2 x 4

×5

Tile 2 x 4 with SW Darth Vader's TIE Fighter Panel with Dark Bluish Gray Lines and Circles Pattern

×2

Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper)

×3

Tile, Modified 3 x 4 with 4 Studs in Center

×4

Plate, Modified 10 x 10 Octagonal with Hole

Brick, Modified 2 x 2 with Channels and Axle Hole

×2

Brick and Axle Separator

Tile, Round 1 x 1

×2

Brick, Modified 1 x 2 with Masonry Profile

×2

Bracket 1 x 2 - 2 x 2 Inverted

×2

Minifigure, Utensil Ingot 1 x 2

×8

Bracket 1 x 2 - 1 x 2 Inverted

×2

Bracket 1 x 2 - 1 x 2

SMART Play™: Darth Vader's TIE Fighter™

About SMART Play™: Darth Vader's TIE Fighter™

Part-out value

Minifigures in SMART Play™: Darth Vader's TIE Fighter™ (2)

Parts (166)

Common questions about SMART Play™: Darth Vader's TIE Fighter™

How much is LEGO SMART Play™: Darth Vader's TIE Fighter™ (75421-1) worth?

What minifigures come in LEGO set 75421-1?

Is it worth parting out LEGO SMART Play™: Darth Vader's TIE Fighter™?

Is LEGO SMART Play™: Darth Vader's TIE Fighter™ (75421-1) retired?

How do I check if my SMART Play™: Darth Vader's TIE Fighter™ set is complete?

More Star Wars sets

Explore more

Company

Legal