brick'em
Sign inStart free
Magna Guard Starfighter

Magna Guard Starfighter

7673-1·Star Wars·2008·1 minifig·128 parts

Used Avg
$103.01
New Avg
$237.15
Add to your inventoryScan the minifigs

About Magna Guard Starfighter

Magna Guard Starfighter (7673-1) is a LEGO Star Wars set released in 2008, currently averaging $103.01 used on BrickLink. It comes with 1 minifigure worth a combined $60.22. The set has retired from retail, so secondary market is the only option. The full parts inventory runs 128 pieces.

Part-out value

Minifig value: $60.22 out of $103.01 total (58%). Over half the set's resale value is in the figures. Sellers parting this set out should list the minifigs individually on BrickLink — they'll earn more than bundling everything together.

Seller notes

  • Sealed copies sell for $237.15 vs $103.01 used — a 130% premium. If you have this set new in sealed box (NISB), price it accordingly.
  • IG-100 MagnaGuard (Magna Guard) / Magna Droid ($30.11) is the most valuable minifig in this set. If you're buying this set secondhand, check that this figure is included — it's often the first one pulled by sellers who part out.
  • This is a vintage set (2008). Condition of the box and instructions significantly affects value. A complete set with original box and instructions can sell for well above the average.

Minifigures in Magna Guard Starfighter (1)

IG-100 MagnaGuard (Magna Guard) / Magna Droid
IG-100 MagnaGuard (Magna Guard) / Magna Droid
sw0190×2$30.11

Parts (128)

Tile, Modified 1 x 2 Grille with Bottom Groove
Tile, Modified 1 x 2 Grille with Bottom Groove
Trans-Red×4
Tile, Modified 1 x 2 Grille with Bottom Groove
Tile, Modified 1 x 2 Grille with Bottom Groove
Dark Red×2
Plate 2 x 2 Corner
Plate 2 x 2 Corner
Tan×2
Tile 1 x 4
Tile 1 x 4
Dark Red×6
Tile 1 x 4
Tile 1 x 4
Dark Bluish Gray×4
Tile, Modified 1 x 2 with Bar Handle
Tile, Modified 1 x 2 with Bar Handle
Tan×2
Plate, Modified 2 x 2 with Pin Hole
Plate, Modified 2 x 2 with Pin Hole
Blue×4
Plate 2 x 12
Plate 2 x 12
Light Bluish Gray×2
Plate, Modified 1 x 2 with Bar Handle on Side - Free Ends
Plate, Modified 1 x 2 with Bar Handle on Side - Free Ends
Tan
Tile, Modified 1 x 1 with Clip
Tile, Modified 1 x 1 with Clip
Light Bluish Gray×4
Bar 1.2L with Top Stud and 4 Bar Arms Up (Palm Tree Top)
Bar 1.2L with Top Stud and 4 Bar Arms Up (Palm Tree Top)
Black×2
Plate, Round 2 x 2 with Rounded Bottom (Boat Stud)
Plate, Round 2 x 2 with Rounded Bottom (Boat Stud)
Tan
Technic, Pin with Short Friction Ridges
Technic, Pin with Short Friction Ridges
Black×7
Plate, Modified 2 x 2 with Pin Holes
Plate, Modified 2 x 2 with Pin Holes
Red×2
Brick, Modified 1 x 2 with Grille / Fluted Profile
Brick, Modified 1 x 2 with Grille / Fluted Profile
Light Bluish Gray
Brick, Modified 2 x 2 with Pins and Axle Hole
Brick, Modified 2 x 2 with Pins and Axle Hole
Dark Bluish Gray
Brick 1 x 2
Brick 1 x 2
Dark Bluish Gray×4
Brick 1 x 1
Brick 1 x 1
Dark Bluish Gray×2
Brick 1 x 1
Brick 1 x 1
Light Bluish Gray×2
Brick 1 x 4
Brick 1 x 4
Light Bluish Gray×6
Brick, Modified 1 x 2 with Log Profile
Brick, Modified 1 x 2 with Log Profile
Tan×2
Plate 2 x 4
Plate 2 x 4
Tan×3
Plate 2 x 3
Plate 2 x 3
Dark Bluish Gray×3
Plate 2 x 3
Plate 2 x 3
Light Bluish Gray×4
Plate 2 x 2
Plate 2 x 2
Tan×2
Plate 2 x 2
Plate 2 x 2
Dark Bluish Gray×2
Plate 2 x 2
Plate 2 x 2
Light Bluish Gray×2
Plate 1 x 2
Plate 1 x 2
Dark Bluish Gray×4
Brick, Modified 1 x 2 with Bar Handle on Side
Brick, Modified 1 x 2 with Bar Handle on Side
Light Bluish Gray×4
Plate 1 x 1
Plate 1 x 1
Dark Red×2
Plate 1 x 1
Plate 1 x 1
Dark Bluish Gray×4
Plate 4 x 4
Plate 4 x 4
Dark Bluish Gray×5
Plate 4 x 6
Plate 4 x 6
Dark Bluish Gray
Plate 2 x 8
Plate 2 x 8
Light Bluish Gray×8
Plate 6 x 8
Plate 6 x 8
Light Bluish Gray×2
Brick, Round 2 x 2 x 2 Robot Body with Bottom Axle Holder (x Shape / + Orientation)
Brick, Round 2 x 2 x 2 Robot Body with Bottom Axle Holder (x Shape / + Orientation)
Dark Bluish Gray×2
Hinge Brick 1 x 2 Locking with 2 Fingers Vertical End
Hinge Brick 1 x 2 Locking with 2 Fingers Vertical End
Black×2
Bar 4L (Lightsaber Blade / Wand)
Bar 4L (Lightsaber Blade / Wand)
Trans-Red×2
Arm Mechanical, Battle Droid
Arm Mechanical, Battle Droid
Black×4
Slope 45 2 x 2
Slope 45 2 x 2
Dark Bluish Gray×2
Wedge, Plate 4 x 4 Cut Corner
Wedge, Plate 4 x 4 Cut Corner
Dark Bluish Gray×8
Hinge Cylinder 1 x 2 Locking with 1 Finger and Axle Hole on Ends with Slots
Hinge Cylinder 1 x 2 Locking with 1 Finger and Axle Hole on Ends with Slots
Light Bluish Gray×2
Brick, Round 1 x 1
Brick, Round 1 x 1
Black×2
Tile 2 x 2
Tile 2 x 2
Dark Bluish Gray×8
Tile 1 x 2
Tile 1 x 2
Dark Bluish Gray×6
Tile 1 x 1
Tile 1 x 1
Tan×2
Tile 1 x 1
Tile 1 x 1
Trans-Red×5
Technic, Brick 1 x 2 with Holes
Technic, Brick 1 x 2 with Holes
Red×2
Technic, Axle and Pin Connector Angled #1
Technic, Axle and Pin Connector Angled #1
Dark Bluish Gray×2
Technic, Axle 2L Notched
Technic, Axle 2L Notched
Black
Technic, Gear 12 Tooth Double Bevel
Technic, Gear 12 Tooth Double Bevel
Black×2
Slope 33 3 x 4
Slope 33 3 x 4
Dark Bluish Gray×4
Plate 1 x 8
Plate 1 x 8
Dark Red×4
Plate 1 x 8
Plate 1 x 8
Light Bluish Gray×4
Plate 1 x 3
Plate 1 x 3
Red×2
Plate 1 x 3
Plate 1 x 3
Black×2
Slope, Inverted 45 2 x 2 with Flat Bottom Pin
Slope, Inverted 45 2 x 2 with Flat Bottom Pin
Light Bluish Gray×3
Plate 1 x 6
Plate 1 x 6
Red×2
Technic, Brick 1 x 2 with Hole
Technic, Brick 1 x 2 with Hole
Tan×2
Technic, Brick 1 x 4 with Holes
Technic, Brick 1 x 4 with Holes
Dark Bluish Gray×2
Technic, Brick 1 x 8 with Holes
Technic, Brick 1 x 8 with Holes
Black×2
Technic, Plate 2 x 4 with 3 Holes
Technic, Plate 2 x 4 with 3 Holes
Light Bluish Gray×6
Plate 1 x 4
Plate 1 x 4
Dark Bluish Gray
Plate 1 x 4
Plate 1 x 4
Light Bluish Gray×6
Slope, Inverted 33 3 x 2 with Flat Bottom Pin and Connections between Studs
Slope, Inverted 33 3 x 2 with Flat Bottom Pin and Connections between Studs
Dark Bluish Gray×4
Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)
Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)
Light Bluish Gray×12
Plate 2 x 6
Plate 2 x 6
Tan
Plate 2 x 6
Plate 2 x 6
Dark Bluish Gray×8
Technic, Brick 1 x 6 with Holes
Technic, Brick 1 x 6 with Holes
Light Bluish Gray×2
Brick, Round 2 x 2 with Axle Hole
Brick, Round 2 x 2 with Axle Hole
Dark Bluish Gray×6
Cone 2 x 2 x 2 - Open Stud
Cone 2 x 2 x 2 - Open Stud
Dark Bluish Gray×4
Cone 2 x 2 x 2 - Open Stud
Cone 2 x 2 x 2 - Open Stud
Light Bluish Gray×4
Plate, Round 1 x 1
Plate, Round 1 x 1
Red×7
Plate, Round 1 x 1
Plate, Round 1 x 1
Trans-Red
Plate, Round 1 x 1
Plate, Round 1 x 1
Light Bluish Gray×3
Wedge 6 x 2 Right
Wedge 6 x 2 Right
Dark Bluish Gray×2
Wedge 6 x 2 Left
Wedge 6 x 2 Left
Dark Bluish Gray×2
Wedge, Plate 4 x 2 Right
Wedge, Plate 4 x 2 Right
Dark Bluish Gray×4
Wedge, Plate 4 x 2 Left
Wedge, Plate 4 x 2 Left
Dark Bluish Gray×4
Slope, Curved 6 x 1 Inverted
Slope, Curved 6 x 1 Inverted
Dark Bluish Gray×2
Wedge 12 x 3 Right
Wedge 12 x 3 Right
Dark Bluish Gray
Wedge 12 x 3 Left
Wedge 12 x 3 Left
Dark Bluish Gray
Technic Bush 1/2 Smooth
Technic Bush 1/2 Smooth
Light Bluish Gray×5
Technic, Pin 1/2 without Friction Ridges
Technic, Pin 1/2 without Friction Ridges
Blue×3
Slope 33 3 x 1
Slope 33 3 x 1
Dark Bluish Gray×2
Slope 33 3 x 1
Slope 33 3 x 1
Light Bluish Gray×4
Slope, Inverted 33 3 x 1
Slope, Inverted 33 3 x 1
Dark Bluish Gray×4
Wedge 6 x 4 Triple Curved
Wedge 6 x 4 Triple Curved
Dark Bluish Gray×3
Technic, Axle 7L
Technic, Axle 7L
Light Bluish Gray×2
Hinge Plate 1 x 2 Locking with 1 Finger on End with Bottom Groove
Hinge Plate 1 x 2 Locking with 1 Finger on End with Bottom Groove
Light Bluish Gray×4
Hinge Plate 1 x 2 Locking with 2 Fingers on End
Hinge Plate 1 x 2 Locking with 2 Fingers on End
Dark Bluish Gray×4
Bracket 1 x 2 - 2 x 2
Bracket 1 x 2 - 2 x 2
Light Bluish Gray×4
Plate 1 x 10
Plate 1 x 10
Red×4
Plate 1 x 10
Plate 1 x 10
Light Bluish Gray×2
Technic, Axle 3L
Technic, Axle 3L
Light Bluish Gray×3
Wedge 16 x 4 Triple Curved with Reinforcements
Wedge 16 x 4 Triple Curved with Reinforcements
Dark Bluish Gray×2
Cone 1 x 1
Cone 1 x 1
Trans-Red×4
Cone 1 x 1 with Top Groove
Cone 1 x 1 with Top Groove
Trans-Purple×4
Cone 1 x 1 with Top Groove
Cone 1 x 1 with Top Groove
Light Bluish Gray×6
Plate, Modified 2 x 2 with Wheels Holder
Plate, Modified 2 x 2 with Wheels Holder
Black
Wedge, Plate 12 x 3 Left
Wedge, Plate 12 x 3 Left
Light Bluish Gray×2
Wedge, Plate 12 x 3 Right
Wedge, Plate 12 x 3 Right
Light Bluish Gray×2
Brick, Modified 1 x 1 with Studs on 2 Sides, Opposite
Brick, Modified 1 x 1 with Studs on 2 Sides, Opposite
Black×2
Bar 1L with Clip Mechanical Claw - Cut Edges and Hole on Side
Bar 1L with Clip Mechanical Claw - Cut Edges and Hole on Side
Dark Bluish Gray
Wedge, Plate 8 x 3 Pentagonal Right
Wedge, Plate 8 x 3 Pentagonal Right
Dark Bluish Gray×2
Wedge, Plate 8 x 3 Pentagonal Left
Wedge, Plate 8 x 3 Pentagonal Left
Dark Bluish Gray×2
Technic, Liftarm, Modified Ball Joint Angled 1 x 2
Technic, Liftarm, Modified Ball Joint Angled 1 x 2
Dark Bluish Gray×2
Slope, Curved 3 x 1
Slope, Curved 3 x 1
Dark Bluish Gray×6
Wedge 4 x 6 x 2/3 Triple Curved
Wedge 4 x 6 x 2/3 Triple Curved
Dark Bluish Gray×2
Brick, Modified 1 x 2 with Studs on 2 Sides
Brick, Modified 1 x 2 with Studs on 2 Sides
Black×10
Slope 30 1 x 1 x 2/3
Slope 30 1 x 1 x 2/3
Dark Bluish Gray×15
Plate, Modified 1 x 1 with U Clip (Horizontal Grip)
Plate, Modified 1 x 1 with U Clip (Horizontal Grip)
Black
Plate, Modified 1 x 2 with Bar Handle on End
Plate, Modified 1 x 2 with Bar Handle on End
Black×2
Slope, Curved 2 x 1 x 1 1/3 with Recessed Stud
Slope, Curved 2 x 1 x 1 1/3 with Recessed Stud
Dark Red×2
Technic, Pin 1/2 with 2L Bar Extension (Flick Missile)
Technic, Pin 1/2 with 2L Bar Extension (Flick Missile)
Light Bluish Gray×2
Windscreen 8 x 4 x 3 Curved
Windscreen 8 x 4 x 3 Curved
Trans-Brown
Slope 18 2 x 1 x 2/3 with Grille
Slope 18 2 x 1 x 2/3 with Grille
Dark Bluish Gray×8
Tile, Modified 4 x 4 with Studs on Edge
Tile, Modified 4 x 4 with Studs on Edge
Dark Bluish Gray×4
Plate, Modified 2 x 2 with Tow Ball Socket, Short, Flattened with Holes and Axle Hole in Center
Plate, Modified 2 x 2 with Tow Ball Socket, Short, Flattened with Holes and Axle Hole in Center
Light Bluish Gray
Bar 6L with Stop Ring
Bar 6L with Stop Ring
Light Bluish Gray×4
Technic, Axle and Pin Connector Perpendicular
Technic, Axle and Pin Connector Perpendicular
Light Bluish Gray
Technic, Brick 1 x 1 with Hole
Technic, Brick 1 x 1 with Hole
Black×6
Technic, Brick 1 x 1 with Hole
Technic, Brick 1 x 1 with Hole
Dark Bluish Gray×4
Technic, Pin 3L with Friction Ridges
Technic, Pin 3L with Friction Ridges
Blue×8
Technic, Steering Knuckle Arm with Tow Ball
Technic, Steering Knuckle Arm with Tow Ball
Light Bluish Gray
Tile 1 x 6
Tile 1 x 6
Dark Bluish Gray×2
Sticker Sheet for Set 7673 - (63658/4529326)
Sticker Sheet for Set 7673 - (63658/4529326)
(Not Applicable)
Minifigure, Utensil Stretcher Holder Flexible
Minifigure, Utensil Stretcher Holder Flexible
Light Bluish Gray×2

Common questions about Magna Guard Starfighter

How much is LEGO Magna Guard Starfighter (7673-1) worth?

Magna Guard Starfighter sells for an average of $103.01 used and $237.15 new/sealed on BrickLink based on 6 months of completed sales. As a retired set, prices tend to hold steady or appreciate over time, especially for complete sets with original packaging. Actual prices vary with completeness — missing minifigures or key parts will lower the value.

What minifigures come in LEGO set 7673-1?

This set includes 1 minifigure: IG-100 MagnaGuard (Magna Guard) / Magna Droid ($30.11). The minifigures have a combined BrickLink value of $60.22. Each figure is linked above with individual pricing if you're looking to buy or sell specific characters.

Is it worth parting out LEGO Magna Guard Starfighter?

The minifigures make up about 58% of the set value ($60.22 out of $103.01). Most of the value is in the complete set package, so selling it whole is likely the better move unless you have buyers lined up for specific figures.

Is LEGO Magna Guard Starfighter (7673-1) retired?

Yes, Magna Guard Starfighter was released in 2008 and has been retired from retail for several years. Retired LEGO sets are only available on the secondary market through BrickLink, eBay, or other resale platforms. At its current price point, it has appreciated since retirement.

How do I check if my Magna Guard Starfighter set is complete?

Use the parts list on this page to check every piece and all 1 minifigure. For the minifigures specifically, you can use the brick'em scanner to identify each figure from a photo and confirm it matches what should be in this set. Missing pieces can be individually sourced on BrickLink.

Explore more

All Star Wars setsStar Wars minifiguresMost valuable Star Wars figsFree scanner