brick'em
Separatist Spider Droid

Separatist Spider Droid

7681-1·Star Wars·2008·6 minifigs·57 parts

Used Avg
$146.21
New Avg
$361.02
Add to your inventoryScan the minifigs

About Separatist Spider Droid

Separatist Spider Droid (7681-1) is a LEGO Star Wars set from 2008 that sells for around $146.21 used on BrickLink. It includes 6 minifigures with a combined resale value of $1085.57 — that's 742% of the set's price in figures alone. The most valuable is Clone Trooper Commander Fox, Coruscant Guard (Phase 1) - Dark Bluish Gray Visor, Pauldron, and Kama, Large Eyes, without Solid Light Bluish Gray Semicircle above Belt at $968.80. For sellers buying complete sets to part out, the minifig value here makes this one worth considering.

Part-out value

The minifigures in this set are worth $1085.57 individually on BrickLink — 742% of the complete set price ($146.21). The figs carry almost all the value here. If you find this set incomplete or are buying to part out, the minifigures are where the money is.

Seller notes

  • Sealed copies sell for $361.02 vs $146.21 used — a 147% premium. If you have this set new in sealed box (NISB), price it accordingly.
  • Clone Trooper Commander Fox, Coruscant Guard (Phase 1) - Dark Bluish Gray Visor, Pauldron, and Kama, Large Eyes, without Solid Light Bluish Gray Semicircle above Belt ($968.80) is the most valuable minifig in this set. If you're buying this set secondhand, check that this figure is included — it's often the first one pulled by sellers who part out.
  • This is a vintage set (2008). Condition of the box and instructions significantly affects value. A complete set with original box and instructions can sell for well above the average.
  • 6 minifigures at $1085.57 combined value. That's a solid minifig haul — consider listing the figures individually on BrickLink where per-figure prices tend to be highest.

Minifigures in Separatist Spider Droid (6)

Battle Droid - Tan, Angled Arm and Straight Arm
Battle Droid - Tan, Angled Arm and Straight Arm
sw0001c$1.50
Super Battle Droid - Pearl Dark Gray, Wide Head
Super Battle Droid - Pearl Dark Gray, Wide Head
sw0092$2.70
Battle Droid Commander - Yellow Torso, Angled Arm and Straight Arm
Battle Droid Commander - Yellow Torso, Angled Arm and Straight Arm
sw0184$3.12
Clone Trooper (Phase 1) - Large Eyes
Clone Trooper (Phase 1) - Large Eyes
sw0201$6.68
Clone Trooper Commander Fox, Coruscant Guard (Phase 1) - Dark Bluish Gray Visor, Pauldron, and Kama, Large Eyes, with Solid Light Bluish Gray Semicircle above Belt
Clone Trooper Commander Fox, Coruscant Guard (Phase 1) - Dark Bluish Gray Visor, Pauldron, and Kama, Large Eyes, with Solid Light Bluish Gray Semicircle above Belt
sw0202a$102.78
Clone Trooper Commander Fox, Coruscant Guard (Phase 1) - Dark Bluish Gray Visor, Pauldron, and Kama, Large Eyes, without Solid Light Bluish Gray Semicircle above Belt
Clone Trooper Commander Fox, Coruscant Guard (Phase 1) - Dark Bluish Gray Visor, Pauldron, and Kama, Large Eyes, without Solid Light Bluish Gray Semicircle above Belt
sw0202b$968.80

Parts (57)

Tile, Modified 1 x 2 Grille with Bottom Groove
Tile, Modified 1 x 2 Grille with Bottom Groove
Light Bluish Gray×4
Brick, Modified Facet 3 x 3
Brick, Modified Facet 3 x 3
Light Bluish Gray×4
Plate, Modified 1 x 2 with Bar Handle on Side - Free Ends
Plate, Modified 1 x 2 with Bar Handle on Side - Free Ends
Dark Bluish Gray×8
Brick, Round Corner 4 x 4 Full Brick
Brick, Round Corner 4 x 4 Full Brick
Dark Bluish Gray×8
Technic, Axle  1L with Tow Ball
Technic, Axle 1L with Tow Ball
Light Bluish Gray×4
Brick, Modified 2 x 2 with Pins and Axle Hole
Brick, Modified 2 x 2 with Pins and Axle Hole
Blue×2
Brick 2 x 3
Brick 2 x 3
Light Bluish Gray×2
Arm Mechanical, Battle Droid
Arm Mechanical, Battle Droid
Tan
Slope 45 2 x 2
Slope 45 2 x 2
Light Bluish Gray×3
Slope 45 2 x 2 Double Convex Corner
Slope 45 2 x 2 Double Convex Corner
Dark Bluish Gray×4
Slope 45 2 x 1 Triple with Inside Bar
Slope 45 2 x 1 Triple with Inside Bar
Light Bluish Gray×12
Brick, Modified 1 x 2 with Pins
Brick, Modified 1 x 2 with Pins
Dark Bluish Gray×4
Hinge Cylinder 1 x 2 Locking with 2 Fingers and Axle Hole on Ends with Slots
Hinge Cylinder 1 x 2 Locking with 2 Fingers and Axle Hole on Ends with Slots
Black
Technic, Axle and Pin Connector Angled #1
Technic, Axle and Pin Connector Angled #1
Dark Bluish Gray×6
Technic, Axle and Pin Connector Angled #2 - 180 degrees
Technic, Axle and Pin Connector Angled #2 - 180 degrees
Light Bluish Gray×4
Technic, Axle  2L Notched
Technic, Axle 2L Notched
Black×8
Technic, Brick 1 x 2 with Axle Hole
Technic, Brick 1 x 2 with Axle Hole
Black
Technic, Axle  5L
Technic, Axle 5L
Light Bluish Gray×2
Technic, Liftarm Thick 1 x 7
Technic, Liftarm Thick 1 x 7
Dark Bluish Gray×8
Slope, Inverted 45 2 x 2 with Flat Bottom Pin
Slope, Inverted 45 2 x 2 with Flat Bottom Pin
Light Bluish Gray×4
Technic, Pin without Friction Ridges
Technic, Pin without Friction Ridges
Light Bluish Gray×17
Slope, Inverted 45 2 x 2 Double Convex
Slope, Inverted 45 2 x 2 Double Convex
Dark Bluish Gray×4
Technic, Brick 1 x 2 with Hole
Technic, Brick 1 x 2 with Hole
Black
Technic, Axle  6L
Technic, Axle 6L
Black×4
Technic, Axle 10L
Technic, Axle 10L
Black
Hinge Brick 1 x 2 Base
Hinge Brick 1 x 2 Base
Light Bluish Gray
Brick, Round 2 x 2 with Axle Hole
Brick, Round 2 x 2 with Axle Hole
Black
Antenna 4H - Round Top
Antenna 4H - Round Top
Light Bluish Gray×2
Plate, Round 2 x 2 with Axle Hole
Plate, Round 2 x 2 with Axle Hole
Dark Bluish Gray×3
Plate, Round 1 x 1
Plate, Round 1 x 1
Red×2
Technic, Axle and Pin Connector Perpendicular Double Split
Technic, Axle and Pin Connector Perpendicular Double Split
Dark Bluish Gray×8
Minifigure Neck Bracket with Back Stud - Thin Back Wall
Minifigure Neck Bracket with Back Stud - Thin Back Wall
Dark Bluish Gray
Technic, Pin 1/2 without Friction Ridges
Technic, Pin 1/2 without Friction Ridges
Blue×3
Technic, Axle  1L with Pin with Friction Ridges
Technic, Axle 1L with Pin with Friction Ridges
Blue
Technic, Liftarm Thick 1 x 2
Technic, Liftarm Thick 1 x 2
Light Bluish Gray
Dish 3 x 3 Inverted (Radar)
Dish 3 x 3 Inverted (Radar)
Dark Bluish Gray
Technic, Axle  7L
Technic, Axle 7L
Light Bluish Gray×4
Hinge Plate 1 x 2 Locking with 1 Finger on End (Undetermined Type)
Hinge Plate 1 x 2 Locking with 1 Finger on End (Undetermined Type)
Light Bluish Gray
Dish 6 x 6 Inverted (Radar) - Hollow Studs
Dish 6 x 6 Inverted (Radar) - Hollow Studs
Light Bluish Gray×2
Technic, Pin Connector Perpendicular 2 x 2 Bent
Technic, Pin Connector Perpendicular 2 x 2 Bent
Light Bluish Gray×5
Cone 1 x 1
Cone 1 x 1
Dark Bluish Gray
Technic, Gear Worm Screw, Long
Technic, Gear Worm Screw, Long
Light Bluish Gray×4
Dish 2 x 2 Inverted (Radar)
Dish 2 x 2 Inverted (Radar)
Trans-Red
Dish 2 x 2 Inverted (Radar)
Dish 2 x 2 Inverted (Radar)
Dark Bluish Gray
Minifigure, Weapon Gun, Blaster SW Standard
Minifigure, Weapon Gun, Blaster SW Standard
Black×4
Arm Mechanical, Straight with Clips at 90 degrees (Vertical Grip)
Arm Mechanical, Straight with Clips at 90 degrees (Vertical Grip)
Tan
Plate, Round 4 x 4 with Hole
Plate, Round 4 x 4 with Hole
Light Bluish Gray×4
Minifigure, Helmet Antenna / Rangefinder with Rounded Shaft for Helmet SW Clone Trooper with Holes
Minifigure, Helmet Antenna / Rangefinder with Rounded Shaft for Helmet SW Clone Trooper with Holes
Dark Bluish Gray×2
Minifigure, Helmet Floodlight for Helmet SW Clone Trooper with Holes
Minifigure, Helmet Floodlight for Helmet SW Clone Trooper with Holes
Dark Bluish Gray×2
Minifigure, Weapon Gun, Blaster SW Small without Scope
Minifigure, Weapon Gun, Blaster SW Small without Scope
Dark Bluish Gray×2
Hinge Brick 2 x 2 Top Plate
Hinge Brick 2 x 2 Top Plate
Black
Technic, Axle Connector 2L (Smooth with x Hole + Orientation)
Technic, Axle Connector 2L (Smooth with x Hole + Orientation)
Dark Bluish Gray×6
Technic, Axle Connector 2L (Smooth with x Hole + Orientation)
Technic, Axle Connector 2L (Smooth with x Hole + Orientation)
Reddish Brown×4
Technic, Brick 1 x 1 with Hole
Technic, Brick 1 x 1 with Hole
Dark Bluish Gray×2
Technic, Pin 3L with Friction Ridges
Technic, Pin 3L with Friction Ridges
Blue×2
Technic, Axle  3L with Stud
Technic, Axle 3L with Stud
Dark Bluish Gray×2
Hose, Flexible  8.5L with (Same Color) Tabbed Ends
Hose, Flexible 8.5L with (Same Color) Tabbed Ends
Black×2

Common questions about Separatist Spider Droid

How much is LEGO Separatist Spider Droid (7681-1) worth?

Separatist Spider Droid sells for an average of $146.21 used and $361.02 new/sealed on BrickLink based on 6 months of completed sales. As a retired set, prices tend to hold steady or appreciate over time, especially for complete sets with original packaging. Actual prices vary with completeness — missing minifigures or key parts will lower the value.

What minifigures come in LEGO set 7681-1?

This set includes 6 minifigures: Battle Droid - Tan, Angled Arm and Straight Arm ($1.50), Super Battle Droid - Pearl Dark Gray, Wide Head ($2.70), Battle Droid Commander - Yellow Torso, Angled Arm and Straight Arm ($3.12), Clone Trooper (Phase 1) - Large Eyes ($6.68), plus 2 more. The minifigures have a combined BrickLink value of $1085.57. Each figure is linked above with individual pricing if you're looking to buy or sell specific characters.

Is it worth parting out LEGO Separatist Spider Droid?

The minifigures alone are worth $1085.57 (742% of the $146.21 set price), so parting out the figs individually on BrickLink can be profitable. Start with Clone Trooper Commander Fox, Coruscant Guard (Phase 1) - Dark Bluish Gray Visor, Pauldron, and Kama, Large Eyes, without Solid Light Bluish Gray Semicircle above Belt at $968.80 — it's the highest-value figure in the set.

Is LEGO Separatist Spider Droid (7681-1) retired?

Yes, Separatist Spider Droid was released in 2008 and has been retired from retail for several years. Retired LEGO sets are only available on the secondary market through BrickLink, eBay, or other resale platforms. At its current price point, it has appreciated since retirement.

How do I check if my Separatist Spider Droid set is complete?

Use the parts list on this page to check every piece and all 6 minifigures. For the minifigures specifically, you can use the brick'em scanner to identify each figure from a photo and confirm it matches what should be in this set. Missing pieces can be individually sourced on BrickLink.

Explore more

All Star Wars setsStar Wars minifiguresMost valuable Star Wars figsFree scanner