About Clone Turbo Tank
Clone Turbo Tank (8098-1) is a LEGO Star Wars set released in 2010, currently averaging $247.59 used on BrickLink. It comes with 6 minifigures worth a combined $86.98. The set has retired from retail, so secondary market is the only option. The full parts inventory runs 176 pieces.
Part-out value
The minifigures account for about 35% of the set's value ($86.98 out of $247.59). The remaining value is in the parts and the set as a complete package. Selling complete will likely net more than parting out unless you have specific demand for the individual figures.
Seller notes
- Sealed copies sell for $501.42 vs $247.59 used — a 103% premium. If you have this set new in sealed box (NISB), price it accordingly.
- Cad Bane - Blue Head, Dark Bluish Gray Legs ($26.22) is the most valuable minifig in this set. If you're buying this set secondhand, check that this figure is included — it's often the first one pulled by sellers who part out.
- This is a vintage set (2010). Condition of the box and instructions significantly affects value. A complete set with original box and instructions can sell for well above the average.
- 6 minifigures at $86.98 combined value. That's a solid minifig haul — consider listing the figures individually on BrickLink where per-figure prices tend to be highest.
Minifigures in Clone Turbo Tank (6)
Parts (176)
Tile, Modified 1 x 2 Grille with Bottom Groove
Black×9
Wedge, Plate 3 x 6 Cut Corners
Dark Bluish Gray
Plate 2 x 2 Corner
Dark Tan×4
Plate 2 x 2 Corner
Light Bluish Gray×4
Tile 1 x 4
Dark Red×14
Tile, Modified 1 x 2 with Bar Handle
Light Bluish Gray×4
Bracket 1 x 2 - 1 x 4
Black×4
Plate, Modified 2 x 2 with Pin Hole
Yellow×10
Plate 2 x 12
Light Bluish Gray
Plate, Modified 1 x 2 with Bar Handle on Side - Free Ends
Black×2
Tile, Modified 1 x 1 with Clip
Light Bluish Gray×12
Brick, Modified 1 x 4 with Channel
Black×2
Plate, Round 2 x 2 with Rounded Bottom (Boat Stud)
Tan×16
Technic, Brick 1 x 10 with Holes
Yellow×4
Technic, Pin with Short Friction Ridges
Black×85
Brick, Modified 1 x 2 with Grille / Fluted Profile
Yellow×8
Wheel 61.6mm D. x 13.6mm Motorcycle
Dark Bluish Gray×20
Brick 2 x 4
Light Bluish Gray×4
Minifigure, Utensil Handlebars
Black
Brick 1 x 2
Light Bluish Gray×8
Plate, Modified 4 x 5 with Trap Door Hinge
Dark Bluish Gray×7
Brick 1 x 6
Light Bluish Gray×4
Brick 1 x 4
Light Bluish Gray×6
Plate 2 x 4
Red×2
Plate 2 x 4
Dark Bluish Gray×18
Plate 2 x 3
Light Bluish Gray×12
Plate 2 x 2
Dark Bluish Gray×4
Plate 1 x 2
Tan×37
Plate 6 x 16
Light Bluish Gray×2
Plate 4 x 10
Black×2
Plate 4 x 6
Light Bluish Gray×4
Plate 6 x 10
Light Bluish Gray
Plate 2 x 8
Dark Bluish Gray×3
Plate 4 x 8
Light Bluish Gray×3
Tile, Modified 2 x 3 with 2 U Clips
Dark Bluish Gray×2
Bar 4L (Lightsaber Blade / Wand)
Trans-Light Blue×2
Bar 4L (Lightsaber Blade / Wand)
Trans-Neon Green
Bar 4L (Lightsaber Blade / Wand)
Light Bluish Gray×7
Arm Mechanical, Battle Droid
Black×3
Slope 45 2 x 2
Light Bluish Gray×6
Slope 45 2 x 2 with Radar with Crosshairs, Disk Slot, Green and Red Buttons Pattern
Black
Slope 45 2 x 1
Dark Bluish Gray×2
Hinge Cylinder 1 x 2 Locking with 2 Fingers and Axle Hole on Ends with Slots
Light Bluish Gray×4
Plate, Round Corner 4 x 4
Dark Bluish Gray×2
Tile 2 x 2
Light Bluish Gray×16
Tile 1 x 2
Trans-Brown×16
Tile 1 x 2
Dark Red×6
Tile 1 x 2
Dark Bluish Gray×2
Tile 1 x 2
Light Bluish Gray×11
Tile 1 x 2 with SW Avionics Control Panel with Copper, Red and Silver Display and Buttons Pattern
Black×4
Plate, Modified 2 x 3 with Hole
Light Bluish Gray
Technic, Brick 1 x 2 with Holes
Red×2
Technic, Pin 3/4
Dark Bluish Gray×4
Technic, Axle and Pin Connector Angled #1
Dark Bluish Gray
Technic, Brick 1 x 14 with Holes
Dark Bluish Gray×7
Plate, Modified 1 x 2 with Door Rail
Yellow×4
Plate, Modified 1 x 2 with Door Rail
Green×13
Plate, Modified 1 x 2 with Door Rail
Light Bluish Gray×9
Technic, Pin 3L with Friction Ridges and Stop Bush
Red×10
Technic, Axle 2L Notched
Red×6
Technic, Liftarm, Modified Bent Thick L-Shape 2 x 4
Dark Bluish Gray×4
Technic, Axle and Pin Connector Perpendicular 3L with Center Pin Hole
Black×2
Technic, Axle and Pin Connector Angled #4 - 135 degrees
Dark Bluish Gray×8
Technic, Axle 5.5L with Stop
Dark Bluish Gray×10
Technic, Liftarm Thick 1 x 15
Dark Bluish Gray×4
Technic, Brick 4 x 4 Open Center
Light Bluish Gray×3
Brick 1 x 2 x 2 with Inside Stud Holder
Light Bluish Gray×8
Technic, Liftarm Thick 1 x 3
Dark Bluish Gray×6
Technic, Liftarm Thick 1 x 7
Light Bluish Gray×4
Technic, Liftarm, Modified Bent Thick L-Shape 3 x 5
Black×4
Technic, Pin 3L without Friction Ridges
Tan×9
Slope, Inverted 45 2 x 2 with Flat Bottom Pin
Dark Bluish Gray×6
Slope, Inverted 45 2 x 1
Light Bluish Gray×8
Plate 1 x 6
Dark Bluish Gray×4
Technic, Pin without Friction Ridges
Light Bluish Gray×15
Slope, Inverted 45 2 x 2 Double Convex
Dark Bluish Gray×2
Turntable 2 x 2 Plate, Top
Light Bluish Gray×2
Turntable 2 x 2 Plate, Base
Black×2
Slope 75 2 x 2 x 3 Double Convex
Light Bluish Gray×2
Technic, Brick 1 x 4 with Holes
Dark Bluish Gray×7
Technic, Brick 1 x 8 with Holes
Light Bluish Gray×5
Technic, Brick 1 x 16 with Holes
Black×4
Technic, Axle 4L
Black×4
Plate 1 x 4
Tan×29
Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)
Light Bluish Gray×8
Plate 2 x 6
Dark Bluish Gray×17
Technic, Brick 1 x 6 with Holes
Dark Bluish Gray×8
Technic, Brick 1 x 12 with Holes
Light Bluish Gray×6
Hinge Brick 1 x 2 Top Plate
Light Bluish Gray×4
Antenna 4H - Round Top
Light Bluish Gray×7
Dish 4 x 4 Inverted (Radar) with Solid Stud
Light Bluish Gray
Plate, Round 2 x 2 with Axle Hole
Black×21
Plate, Round 2 x 2 with Axle Hole
Light Bluish Gray×8
Plate, Round 1 x 1
Black×43
Plate, Round 1 x 1
Trans-Yellow×16
Plate, Round 1 x 1
Light Bluish Gray×3
Minifigure, Utensil Seat / Chair 2 x 2
Black×4
Plate, Modified 1 x 1 with Light Attachment - Thick Ring
Black×2
Plate, Modified 1 x 1 with U Clip Thick (Vertical Grip)
Black×4
Technic, Liftarm Thick 1 x 13
Black×2
Tile 1 x 8
Light Bluish Gray×4
Technic, Liftarm Thin 1 x 2 - Axle Holes
Red×2
Wedge, Plate 4 x 2 Right
Light Bluish Gray
Wedge, Plate 4 x 2 Left
Light Bluish Gray
Technic, Axle and Pin Connector Perpendicular 3L with 2 Pin Holes
Light Bluish Gray×24
Minifigure Neck Bracket with Back Stud - Thin Back Wall
Dark Bluish Gray×10
Technic Bush 1/2 Smooth
Yellow×5
Technic Bush 1/2 Smooth
Light Bluish Gray×4
Technic, Pin 1/2 without Friction Ridges
Light Bluish Gray×28
Slope 33 3 x 1
Black×4
Slope 33 3 x 1
Light Bluish Gray×6
Slope, Inverted 33 3 x 1
Dark Bluish Gray×2
Technic, Axle 1L with Pin with Friction Ridges
Blue×36
Container, Box 2 x 2 x 2
Light Bluish Gray×2
Container, Box 2 x 2 x 2 Door with Slot
Light Bluish Gray×2
Wedge, Plate 3 x 2 Right
Dark Bluish Gray
Wedge, Plate 3 x 2 Left
Dark Bluish Gray
Technic, Liftarm Thick 1 x 2
Black×2
Dish 3 x 3 Inverted (Radar)
Dark Bluish Gray×2
Hinge Tile 1 x 3 Locking with 1 Finger on Top
Light Bluish Gray×4
Hinge Plate 1 x 2 Locking with 1 Finger on End (Undetermined Type)
Dark Bluish Gray×4
Hinge Plate 1 x 2 Locking with 2 Fingers on End
Light Bluish Gray×4
Dish 6 x 6 Inverted (Radar) - Hollow Studs
Light Bluish Gray×10
Slope 75 2 x 1 x 3 - Hollow Stud
Light Bluish Gray×4
Bracket 1 x 2 - 2 x 2
Yellow×4
Bracket 1 x 2 - 2 x 2
Dark Bluish Gray
Technic, Axle 3L
Light Bluish Gray
Cone 1 x 1 with Top Groove
Dark Bluish Gray
Antenna Small Base with Black Lever (4592 / 4593)
Light Bluish Gray×13
Pneumatic T Piece Second Version (T Bar with Ball in Center)
Light Bluish Gray×6
Dish 2 x 2 Inverted (Radar)
Green×2
Dish 2 x 2 Inverted (Radar)
Light Bluish Gray×2
Slope, Curved 1 x 2 x 2/3 Wing End
Dark Bluish Gray×2
Brick, Modified 1 x 1 with Studs on 2 Sides, Opposite
Light Bluish Gray×2
Wedge, Plate 3 x 4 with Stud Notches
Green
Plate, Modified 1 x 2 with Bar Handle on Side - Closed Ends
Light Bluish Gray×13
Technic, Axle Connector Hub with 4 Bars and Pin Hole
Dark Bluish Gray×2
Wedge, Plate 8 x 3 Pentagonal Right
Light Bluish Gray×3
Wedge, Plate 8 x 3 Pentagonal Left
Light Bluish Gray×3
Vehicle, Mudguard 4 x 2 1/2 x 1 2/3 with Arch Round
Dark Bluish Gray×2
Wedge, Plate 2 x 4
Light Bluish Gray×9
Brick, Modified 1 x 2 with Studs on 2 Sides
Black×2
Arm Mechanical, Exo-Force / Bionicle, Thin Support
Pearl Dark Gray×4
Slope 30 1 x 1 x 2/3
Light Bluish Gray×19
Wedge, Plate 6 x 3 Right
Light Bluish Gray×4
Wedge, Plate 6 x 3 Left
Light Bluish Gray×4
Minifigure, Weapon Gun, Blaster SW Long
Black×2
Minifigure, Weapon Gun, Blaster SW Standard
Black×2
Wheel 31mm D. x 15mm Technic
Light Bluish Gray
Plate, Round 4 x 4 with Hole
Light Bluish Gray×2
Plate, Modified 1 x 2 with Bar Handle on End
Black×2
Wedge, Plate 6 x 6 Cut Corner
Black×2
Technic, Pin 1/2 with 2L Bar Extension (Flick Missile)
Light Bluish Gray×2
Minifigure Armor Leg Anti-Blast Kama
Black
Minifigure, Helmet Antenna / Rangefinder with Rounded Shaft for Helmet SW Clone Trooper with Holes
Black
Minifigure, Helmet Floodlight for Helmet SW Clone Trooper with Holes
Black×2
Minifigure, Weapon Gun, Blaster SW Small without Scope
Black×2
Plate, Modified 1 x 1 with Open O Clip (Horizontal Grip)
Dark Bluish Gray×23
Tile, Modified 6 x 12 with Studs on Edges
Light Bluish Gray×2
Tile, Modified 4 x 4 with Studs on Edge
Light Bluish Gray×2
Tile, Modified 4 x 6 with Studs on Edges
Light Bluish Gray×11
Technic, Pin Connector Round 2L with Slot (Pin Joiner Round)
Black×6
Technic, Pin Connector Round 2L with Slot (Pin Joiner Round)
Light Bluish Gray×4
Tile 1 x 3
Light Bluish Gray×10
Plate, Modified 1 x 2 with Clip on End (Horizontal Grip)
Light Bluish Gray×16
Bar 6L with Stop Ring
Light Bluish Gray×2
Minifigure, Weapon Lightsaber Hilt Straight
Metallic Silver×3
Technic, Axle and Pin Connector Perpendicular
Red×2
Technic, Brick 1 x 1 with Hole
Black×6
Technic, Pin 3L with Friction Ridges
Blue×2
Technic, Axle 3L with Stud
Dark Tan×2
Tile 1 x 6
Light Bluish Gray×12
Dish 5 x 5
Light Bluish Gray×2
Technic, Shock Absorber 6.5L with Black Piston Rod - Soft Spring, Standard Coils
Light Bluish Gray×2
Sticker Sheet for Set 8098 - (90352/4583265)
(Not Applicable)
Tile 2 x 4
Light Bluish Gray×4Common questions about Clone Turbo Tank
How much is LEGO Clone Turbo Tank (8098-1) worth?
Clone Turbo Tank sells for an average of $247.59 used and $501.42 new/sealed on BrickLink based on 6 months of completed sales. As a retired set, prices tend to hold steady or appreciate over time, especially for complete sets with original packaging. Actual prices vary with completeness — missing minifigures or key parts will lower the value.
What minifigures come in LEGO set 8098-1?
This set includes 6 minifigures: Anakin Skywalker - Large Eyes, Reddish Brown Arms ($4.98), Ahsoka Tano (Padawan) - Tube Top and Belt ($10.39), Clone Trooper (Phase 1) - Black Rangefinder, Large Eyes ($8.78), Aayla Secura - Large Eyes ($24.02), plus 2 more. The minifigures have a combined BrickLink value of $86.98. Each figure is linked above with individual pricing if you're looking to buy or sell specific characters.
Is it worth parting out LEGO Clone Turbo Tank?
The minifigures make up about 35% of the set value ($86.98 out of $247.59). Most of the value is in the complete set package, so selling it whole is likely the better move unless you have buyers lined up for specific figures.
Is LEGO Clone Turbo Tank (8098-1) retired?
Yes, Clone Turbo Tank was released in 2010 and has been retired from retail for several years. Retired LEGO sets are only available on the secondary market through BrickLink, eBay, or other resale platforms. At its current price point, it has appreciated since retirement.
How do I check if my Clone Turbo Tank set is complete?
Use the parts list on this page to check every piece and all 6 minifigures. For the minifigures specifically, you can use the brick'em scanner to identify each figure from a photo and confirm it matches what should be in this set. Missing pieces can be individually sourced on BrickLink.