How much is LEGO The Hulkbuster Smash-Up (76104-1) worth?

The Hulkbuster Smash-Up sells for an average of $21.72 used and $48.73 new/sealed on BrickLink based on 6 months of completed sales. As a retired set, prices tend to hold steady or appreciate over time, especially for complete sets with original packaging. Actual prices vary with completeness. Missing minifigures or key parts will lower the value.

What minifigures come in LEGO set 76104-1?

This set includes 4 minifigures: Bruce Banner - Black Legs ($3.01), Proxima Midnight ($3.59), Falcon - Dark Bluish Gray and Black Suit, Plain Legs ($2.50), Outrider - Extended Arms, Torso with Long Dark Bluish Gray Tips at Neck ($1.65). The minifigures have a combined BrickLink value of $10.75. Each figure is linked above with individual pricing if you're looking to buy or sell specific characters.

Is it worth parting out LEGO The Hulkbuster Smash-Up?

The minifigures make up about 50% of the set value ($10.75 out of $21.72). Most of the value is in the complete set package, so selling it whole is likely the better move unless you have buyers lined up for specific figures.

Is LEGO The Hulkbuster Smash-Up (76104-1) retired?

Yes, The Hulkbuster Smash-Up was released in 2018 and has been retired from retail for several years. Retired LEGO sets are only available on the secondary market through BrickLink, eBay, or other resale platforms.

How do I check if my The Hulkbuster Smash-Up set is complete?

Use the parts list on this page to check every piece and all 4 minifigures. For the minifigures specifically, you can use the brick'em scanner to identify each figure from a photo and confirm it matches what should be in this set. Missing pieces can be individually sourced on BrickLink.

The Hulkbuster Smash-Up

76104-1·Super Heroes·2018·4 minifigs·130 parts

Used Avg

$21.72

New Avg

$48.73

Add to your inventory Scan the minifigs

About The Hulkbuster Smash-Up

The Hulkbuster Smash-Up (76104-1) is a LEGO Super Heroes set released in 2018, currently averaging $21.72 used on BrickLink. It comes with 4 minifigures worth a combined $10.75. The set has retired from retail, so secondary market is the only option. The full parts inventory runs 130 pieces.

Parts (130)

Minifigure, Utensil Ring 1 x 1

Chrome Gold×3

Tile, Modified 2 x 2 Inverted

Dark Bluish Gray×2

Bracket 5 x 2 x 1 1/3 with 2 Holes and Bottom Tube

White

Bracket 5 x 2 x 1 1/3 with 2 Holes and Bottom Tube

Black

Bracket 5 x 2 x 1 1/3 with 2 Holes and Bottom Tube

Light Bluish Gray

Slope, Curved 2 x 1 x 2/3

Dark Red×2

Wedge 6 x 4 Cutout (Train Roof) with 5 Large Bottom Tubes

Black

Wedge 4 x 4 Triple Inverted with Connections between 4 Studs

Dark Bluish Gray

Wedge 2 x 2 (Slope 45 Corner)

Dark Red×2

Slope, Curved 2 x 2 x 2/3

Dark Red×17

Tile, Round 2 x 2 with Hole

Dark Bluish Gray

Slope 45 2 x 1 Triple with Bottom Stud Holder

Light Bluish Gray

Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)

Dark Red×2

Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)

Pearl Gold

Brick, Round 2 x 2 with Pin Holes

Light Bluish Gray

Plate, Modified 1 x 2 with Bar Handles on Ends

Black×2

Plate, Modified 1 x 2 with Bar Handles on Ends

Light Bluish Gray

Technic, Liftarm Thick 1 x 1 (Spacer)

Flat Silver×3

Windscreen 4 x 4 x 1 2/3 Canopy Dome Half Sphere with Bar Handle with Gold Hulkbuster Face with Dark Bluish Gray Cheeks and Forehead Panel Pattern

Dark Red

Tile, Round 1 x 1 with Bar and Small Pin Hole

Pearl Gold×2

Large Figure Armor, Round, Smooth

Dark Red×2

Tile, Modified 2 x 3 Pentagonal

Trans-Purple

Tile, Modified 1 x 2 Grille with Bottom Groove

Pearl Gold×5

Plate 2 x 2 Corner

Black×4

Tile, Modified 1 x 2 with Bar Handle

Pearl Dark Gray

Bracket 1 x 2 - 1 x 4 with Rounded Corners

Light Bluish Gray×2

Plate, Modified 1 x 2 with Bar Handle on Side - Free Ends

Black×2

Plate, Modified 1 x 2 with Bar Handle on Side - Free Ends

Dark Bluish Gray×4

Plate, Modified 1 x 2 with Bar Handle on Side - Free Ends

Light Bluish Gray×7

Plate, Round 2 x 2 with Rounded Bottom (Boat Stud)

Trans-Light Blue×2

Plate, Modified 2 x 4 with Pin Holes

Black

Wedge, Plate 2 x 2 Cut Corner

Dark Red×10

Technic, Pin with Short Friction Ridges

Black×3

Wedge 2 x 1 x 2/3 Right

Dark Red

Wedge 2 x 1 x 2/3 Left

Dark Red

Brick 1 x 2

Tan

Brick 1 x 1

Trans-Purple×2

Brick 1 x 6

Dark Red

Plate 2 x 4

Dark Red×4

Plate 2 x 3

Tan×2

Plate 2 x 2

Dark Red×7

Plate 2 x 2

Light Bluish Gray×6

Plate 1 x 2

Trans-Light Blue×6

Plate 1 x 2

Dark Red×8

Plate 4 x 4

Dark Bluish Gray

Slope 18 4 x 2

Black

Arm Mechanical, Battle Droid

Dark Bluish Gray×3

Slope, Inverted 45 4 x 2 Double with Pins

Dark Bluish Gray

Slope, Curved 2 x 2 Lip

Dark Red×5

Brick 1 x 2 without Bottom Tube

Trans-Light Blue×2

Tile 1 x 1

Trans-Light Blue×2

Technic, Plate 2 x 6 with 5 Holes

Light Bluish Gray

Technic, Brick 1 x 2 with Axle Hole

Black

Technic, Brick 1 x 2 with Axle Hole

Light Bluish Gray×2

Technic, Axle 5.5L with Stop

Dark Bluish Gray

Technic, Gear 12 Tooth Double Bevel

Black×2

Technic, Liftarm Thick 1 x 7

Black×2

Technic, Pin 3L without Friction Ridges

Tan×2

Slope, Inverted 45 4 x 1 Double

Dark Bluish Gray

Slope, Curved 2 x 2 x 2/3 Inverted

Light Bluish Gray×6

Brick 1 x 3

Dark Bluish Gray×2

Plate 1 x 3

Dark Red×2

Rock Faceted with Small Pin (Marvel Infinity Stone), 4 on Sprue

Trans-Orange

Slope, Inverted 45 2 x 2 with Flat Bottom Pin

Dark Bluish Gray×2

Technic, Brick 1 x 4 with Holes

Dark Bluish Gray×2

Technic, Axle 4L

Red

Plate 1 x 4

Light Bluish Gray

Plate 2 x 6

Black

Hinge Brick 1 x 2 Base

Light Bluish Gray

Brick, Round 2 x 2 with Axle Hole

Trans-Light Blue

Plate, Round 2 x 2 with Axle Hole

Dark Bluish Gray

Plate, Round 1 x 1

Pearl Dark Gray×7

Plate, Round 1 x 1

Pearl Gold×15

Wedge, Plate 4 x 2 Right

Black

Wedge, Plate 4 x 2 Left

Black

Technic Bush 1/2 Smooth

Light Bluish Gray×3

Container, Box 2 x 2 x 2

Black

Container, Box 2 x 2 x 2 Door with Slot

Trans-Clear

Hinge Plate 1 x 2 Locking with 1 Finger on End without Bottom Groove

Dark Bluish Gray×8

Flag 2 x 2 Trapezoid with Flat Edge

Black×4

Flag 2 x 2 Trapezoid with Flat Edge

Dark Bluish Gray×2

Bracket 1 x 2 - 2 x 2

Dark Bluish Gray×4

Cone 1 x 1 with Top Groove

Trans-Orange×2

Technic Rotation Joint Ball Loop with 2 Perpendicular Pins with Friction

Black×2

Slope, Curved 3 x 2 x 2/3 with 2 Studs, Wing End

Pearl Dark Gray

Slope, Curved 2 x 2 x 2/3 with 2 Studs and Curved Sides

Pearl Gold×4

Slope, Curved 1 x 2 x 2/3 Wing End

Pearl Gold×4

Wedge 2 x 4 Triple

Dark Red×2

Technic, Brick Modified 2 x 2 with Pin Hole and Rotation Joint Ball Half Vertical

Dark Bluish Gray×2

Technic, Brick Modified 2 x 2 with Pin Hole and 2 Rotation Joint Sockets

Black

Plate, Modified 1 x 2 with Bar Handle on Side - Closed Ends

Pearl Gold×4

Slope, Curved 3 x 1

Black×2

Technic Ball Joint with Through Axle Hole

Black×2

Slope 30 1 x 1 x 2/3

Dark Red×7

Ball, Bionicle Zamor Sphere

Black×2

Technic, Brick Modified 2 x 2 with Ball Joint and Axle Hole with 6 Holes in Ball

Dark Bluish Gray×2

Slope, Curved 2 x 1 x 1 1/3 with Recessed Stud

Dark Red×6

Slope, Curved 2 x 1 x 1 1/3 with Recessed Stud

Dark Tan×2

Plate, Modified 1 x 1 with Open O Clip (Horizontal Grip)

Black×6

Plate, Modified 1 x 1 with Open O Clip (Horizontal Grip)

Light Bluish Gray×2

Hinge Brick 2 x 2 Top Plate

Light Bluish Gray

Slope 18 2 x 1 x 2/3 with Grille

Black×4

Plate, Modified 1 x 2 with Clip on End (Horizontal Grip)

Black×2

Minifigure, Weapon Lightsaber Hilt Straight

Pearl Dark Gray×2

Minifigure, Weapon Sword, Spike Flexible 3.5L with Bar End

Black×2

Technic, Axle 2L with Reverser Handle Axle Connector

Black

Technic, Gear 12 Tooth Bevel

Tan×4

Sticker Sheet for Set 76104 - (38357/6224272)

(Not Applicable)

Slope 30 1 x 2 x 2/3

Dark Red×3

Slope 30 1 x 2 x 2/3

Dark Bluish Gray

Technic, Axle 4L with Stop

Dark Bluish Gray×2

Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper)

Dark Bluish Gray

Bar 3L (Bar Arrow)

Pearl Gold×3

Hero Factory Arm / Leg with Ball Joint on Axle and Ball Socket

Black×2

Hero Factory Armor with Ball Joint Socket - Size 3

Black×2

Technic, Brick Modified 2 x 2 with Ball Socket and Axle Hole - Straight Forks with Round Ends and Open Sides

Black×2

Technic, Brick Modified 2 x 2 with Ball Socket and Axle Hole - Straight Forks with Round Ends and Open Sides

Dark Bluish Gray×2

Plate, Modified 1 x 2 with Clip with Center Cut on Top

Black×6

Plate, Modified 1 x 4 with 2 Studs without Groove

Dark Red×2

Slope 45 2 x 1 with 2/3 Cutout

Black×2

Slope 45 2 x 1 with 2/3 Cutout

Dark Tan×2

Panel 1 x 2 x 1 with Rounded Corners and Center Divider

Tan

Arm Skeleton, Bent with Clips (Horizontal Grip)

Black

Arm Mechanical, Exo-Force / Bionicle, Thick Support

Dark Red×8

Projectile Launcher Part, Hero Factory Zamor Sphere Launcher - Bottom Half with Axle Hole 1 x 7

Pearl Dark Gray×2

Plate, Modified 2 x 2 x 2/3 with 2 Studs on Side - Solid Bottom Tube

Black

Bracket 1 x 2 - 2 x 2 Inverted

Light Bluish Gray×4

Bracket 1 x 2 - 1 x 2 Inverted

Dark Bluish Gray×11

Bracket 1 x 2 - 1 x 2 Inverted

Light Bluish Gray×4

Bracket 1 x 2 - 1 x 2

Black×12

The Hulkbuster Smash-Up

About The Hulkbuster Smash-Up

Part-out value

Seller notes

Minifigures in The Hulkbuster Smash-Up (4)

Parts (130)

Common questions about The Hulkbuster Smash-Up

How much is LEGO The Hulkbuster Smash-Up (76104-1) worth?

What minifigures come in LEGO set 76104-1?

Is it worth parting out LEGO The Hulkbuster Smash-Up?

Is LEGO The Hulkbuster Smash-Up (76104-1) retired?

How do I check if my The Hulkbuster Smash-Up set is complete?

More Super Heroes sets

Explore more

Company

Legal