How much is LEGO Endgame Final Battle (76266-1) worth?

Endgame Final Battle sells for an average of $55.73 used and $55.74 new/sealed on BrickLink based on 6 months of completed sales. As a retired set, prices tend to hold steady or appreciate over time, especially for complete sets with original packaging. Actual prices vary with completeness. Missing minifigures or key parts will lower the value.

What minifigures come in LEGO set 76266-1?

This set includes 6 minifigures: Shuri - Dark Blue Top ($1.91), Captain Marvel (Carol Danvers) - Tan Hair Swept Back ($4.19), Okoye - Red Top, Shoulder Armor ($2.44), Thanos - Large Figure, Dark Bluish Gray Outfit with Gold Armor, Printed Legs, Angry ($11.01), plus 2 more. The minifigures have a combined BrickLink value of $31.23. Each figure is linked above with individual pricing if you're looking to buy or sell specific characters.

Is it worth parting out LEGO Endgame Final Battle?

The minifigures make up about 56% of the set value ($31.23 out of $55.73). Most of the value is in the complete set package, so selling it whole is likely the better move unless you have buyers lined up for specific figures.

Is LEGO Endgame Final Battle (76266-1) retired?

Yes, Endgame Final Battle was released in 2023 and has been retired from retail for several years. Retired LEGO sets are only available on the secondary market through BrickLink, eBay, or other resale platforms.

How do I check if my Endgame Final Battle set is complete?

Use the parts list on this page to check every piece and all 6 minifigures. For the minifigures specifically, you can use the brick'em scanner to identify each figure from a photo and confirm it matches what should be in this set. Missing pieces can be individually sourced on BrickLink.

Endgame Final Battle

76266-1·Super Heroes·2023·6 minifigs·246 parts

Used Avg

$55.73

New Avg

$55.74

Add to your inventory Scan the minifigs

About Endgame Final Battle

Endgame Final Battle (76266-1) is a LEGO Super Heroes set released in 2023, currently averaging $55.73 used on BrickLink. It comes with 6 minifigures worth a combined $31.23. The set has retired from retail, so secondary market is the only option. The full parts inventory runs 246 pieces.

Parts (246)

Horse, Movable Legs with Black Eyes and White Pupils Pattern

Wheel 14mm D. x 9.9mm with Center Groove, Fake Bolts and 6 Double Spokes

Tire 21 x 9.9

Brick, Modified 1 x 2 with Studs on 1 Side

×9

Brick, Modified 1 x 2 with Studs on 1 Side

×23

Plate 3 x 3

×12

Slope, Curved 2 x 1 x 2/3

×8

Wedge 2 x 2 (Slope 45 Corner)

×2

Brick, Modified Facet 4 x 4

×7

Plate, Modified 1 x 2 with Small Tow Ball Socket on End

Panel 1 x 4 x 2 with Side Supports - Hollow Studs

Tile 2 x 2 Corner

Tile, Round 2 x 2 with Bottom Stud Holder

Minifigure Hand Armor

×2

Brick, Modified 1 x 4 with Masonry Profile

×4

Brick, Modified 1 x 4 with Masonry Profile

×2

Tile, Round 2 x 2 with Hole

Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)

×2

Wedge, Plate A-Shape with 2 Rows of 4 Studs

×3

Wedge, Plate A-Shape with 2 Rows of 4 Studs

×2

Tile, Modified 1 x 1 with Open O Clip

×2

Minifigure, Weapon Sword, Greatsword Pointed with Thick Crossguard

Plate, Round Corner 2 x 6 Double

×2

Wing 4 x 7 Right with Feathers and Bar Handles

Wing 4 x 7 Left with Feathers and Bar Handles

Tile, Round 1 x 1 with Bar and Small Pin Hole

×2

Technic, Axle and Pin Connector Hub with 1L Axle

×3

Brick 2 x 2 Corner

×7

Tile, Modified 1 x 2 Grille with Bottom Groove

×2

Wedge, Plate 3 x 6 Cut Corners

Plate 2 x 2 Corner

×7

Wedge, Plate 2 x 2 Left

×3

Hinge Plate 1 x 4 Swivel (2429 / 2430)

×2

Tile 1 x 4

×4

Slope, Inverted 75 2 x 1 x 3

Wedge, Plate 3 x 3 Cut Corner

×2

Wedge, Plate 3 x 3 Cut Corner

×4

Wedge, Plate 3 x 3 Cut Corner

Brick 2 x 6

×4

Brick 2 x 6

×2

Brick, Round Tube 1 x 1 d. 90 degrees Elbow Macaroni - No Stud - Type 2 - Axle Hole

×2

Plate, Round 1 x 1 with Bar Handle

Plate, Round 2 x 2 with Rounded Bottom (Boat Stud)

×2

Plate, Round 2 x 2 with Rounded Bottom (Boat Stud)

Wedge, Plate 2 x 2 Cut Corner

×2

Tile 2 x 3

×10

Brick, Modified 1 x 1 with Studs on 2 Sides, Adjacent

×25

Brick, Modified 1 x 1 with Studs on 2 Sides, Adjacent

×8

Tile, Modified Facet 2 x 2

×3

Tile, Modified Facet 2 x 2

×4

Wave Rounded Energy with Bar Handle (Power Blast)

×2

Tile, Round Corner 4 x 4 Macaroni

×4

Tile, Round Corner 4 x 4 Macaroni

×4

Technic, Pin with Short Friction Ridges

×3

Slope 45 2 x 1 with Cutout without Stud

×2

Slope 45 2 x 1 with Cutout without Stud

Bracket 1 x 2 - 1 x 4 with Rounded Corners at the Bottom

Brick 2 x 4

Brick 2 x 3

×2

Brick 2 x 3

×4

Brick 2 x 3

×2

Brick 2 x 2

Brick 1 x 2

×2

Brick 1 x 2

×6

Brick 1 x 8

×3

Brick 1 x 6

×2

Brick 1 x 4

×2

Plate 2 x 4

×2

Plate 2 x 4

×3

Plate 2 x 4

Plate 2 x 3

×3

Plate 1 x 2

×4

Plate 1 x 2

×3

Brick, Modified 1 x 2 with Open O Clip Thick (Vertical Grip)

×2

Plate 1 x 1

×5

Plate 1 x 1

×3

Plate 4 x 10

×3

Plate 4 x 4

×2

Plate 4 x 6

×2

Minifigure, Utensil Flotation Ring (Life Preserver)

Plate, Round Corner 3 x 3

Brick, Round 2 x 2 x 2 Robot Body with Bottom Axle Holder (x Shape / + Orientation)

Bar 4L (Lightsaber Blade / Wand)

Slope 45 2 x 2

Slope 45 2 x 1

×3

Slope 45 2 x 1

×14

Slope 45 2 x 1

×2

Slope 45 2 x 1

×3

Panel 1 x 4 x 1

Wedge, Plate 4 x 4 Cut Corner

Brick, Round 1 x 1

×14

Vehicle, Steering Wheel Small, 2 Studs Diameter

Tile 2 x 2

×8

Tile 1 x 2

×2

Tile 1 x 2

×4

Tile 1 x 2 with Vehicle Control Panel, Silver Sliders, Yellow Buttons, Dark Bluish Gray Panels Pattern

Tile 1 x 2 with Black and Yellow Danger Stripes (Small Yellow Corners) Pattern

×2

Technic, Plate 2 x 6 with 5 Holes

Technic, Axle and Pin Connector Angled #3 - 157.5 degrees

×2

Technic, Axle and Pin Connector Angled #3 - 157.5 degrees

×2

Technic, Axle 2L Notched

×2

Technic, Brick 1 x 2 with Axle Hole

×5

Technic, Brick 1 x 2 with Axle Hole

Technic, Axle and Pin Connector Angled #4 - 135 degrees

Brick 1 x 2 x 2 with Inside Stud Holder

×2

Slope 33 3 x 2

Tile, Modified 2 x 2 with Studs on Edge

×4

Plate 1 x 8

×2

Plate, Round 1 x 2 with Open Studs

×9

Plate, Round 1 x 2 with Open Studs

×16

Tile, Modified 2 x 2 Triangular

×8

Brick 1 x 3

×12

Plate 1 x 3

×20

Rock Faceted with Small Pin (Marvel Infinity Stone), 4 on Sprue

Slope, Inverted 45 2 x 1

×6

Slope, Inverted 45 2 x 1

×2

Plate 1 x 6

Rat / Mouse with Black Eyes Pattern

Bracket 1 x 1 - 1 x 1 Inverted

×2

Technic, Brick 1 x 2 with Hole

×2

Technic, Brick 1 x 4 with Holes

Technic, Axle 4L

×4

Technic, Axle 6L

Technic, Axle 8L

Technic, Plate 2 x 4 with 3 Holes

×2

Technic, Plate 2 x 4 with 3 Holes

×2

Technic, Plate 2 x 4 with 3 Holes

×3

Plate 1 x 4

×6

Plate 1 x 4

×3

Plate 1 x 4

×2

Technic, Plate 2 x 8 with 7 Holes

×2

Slope, Inverted 33 3 x 2 with Flat Bottom Pin and Connections between Studs

Plate 2 x 6

×2

Plate 2 x 6

×2

Hinge Brick 1 x 4 Swivel Top

×2

Hinge Brick 1 x 4 Swivel Base

×2

Plate 2 x 10

×2

Hinge Brick 1 x 2 Base

Brick, Round 2 x 2 with Axle Hole

×2

Plate 6 x 6

Technic, Brick 2 x 4 with 3 Axle Holes

×3

Plate, Round 2 x 2 with Axle Hole

×4

Plate, Round 2 x 2 with Axle Hole

×2

Plate, Round 2 x 2 with Axle Hole

×6

Plate, Round 2 x 2 with Axle Hole

×2

Bar Curved with Axle 1L and 1 x 1 Round Plate End

×2

Brick, Modified 1 x 1 with Headlight

×6

Wedge, Plate 4 x 2 Left

×3

Plate 2 x 16

Slope 33 3 x 1

×2

Slope 33 3 x 1

×15

Technic, Axle 1L with Pin with Friction Ridges

×5

Wedge 4 x 2 Triple Right

×3

Bracket 1 x 2 - 2 x 2

×3

Plate, Modified 1 x 2 with Open O Clip on Top

×2

Technic, Axle 3L

×3

Technic, Axle 3L

×2

Cone 1 x 1 with Top Groove

×2

Plate, Modified 1 x 2 with Bar Arm Up (Horizontal Arm 5mm)

×2

Dish 2 x 2 Inverted (Radar)

×2

Wedge, Plate 6 x 4 Right

Plate, Modified 1 x 2 with Bar Handle on Side - Closed Ends

×2

Plate, Modified 1 x 2 with Bar Handle on Side - Closed Ends

Bar 1L with Clip Mechanical Claw - Cut Edges and Hole on Side

Slope 30 1 x 1 x 2/3

×2

Slope 30 1 x 1 x 2/3

×11

Slope 30 1 x 1 x 2/3

×11

Brick, Round Corner 10 x 10 with Slope 33 Edge, Axle Hole, Facet Cutout

×4

Plate, Round 4 x 4 with Hole

Brick, Modified 1 x 1 with Open O Clip (Vertical Grip) - Hollow Stud

Plate, Modified 1 x 2 with Bar Handle on End

×2

Slope 65 2 x 1 x 2

×2

Wedge, Plate 6 x 6 Cut Corner

×2

Wedge, Plate 6 x 6 Cut Corner

Plate, Modified 1 x 1 with Open O Clip (Horizontal Grip)

×2

Plate, Modified 1 x 1 with Open O Clip (Horizontal Grip)

Hinge Brick 2 x 2 Top Plate

Tile 1 x 3

×2

Minifigure, Plume Feather Triple Compact / Flame / Water with Small Pin

×2

Plate, Modified 4 x 4 with 2 x 2 Open Center

×10

Technic, Axle Connector 2L (Smooth with x Hole + Orientation)

×2

Technic, Brick 1 x 1 with Hole

Plate, Modified 2 x 4 with 2 Studs (Double Jumper)

Bar 1L with Angled Hollow Stud

×2

Bar 1L with Angled Hollow Stud

×5

Tile, Modified 4 x 4 with Studs on Edges and 2 Open O Clips (Horizontal Grip)

Technic, Pin with Friction Ridges and Tow Ball with Round Pin Hole

Tile 1 x 6

×4

Tile 1 x 6

Plate, Modified 1 x 2 with Wheel Holder, Reinforced Underside

Tile 2 x 6

Arch 1 x 3 Inverted

×4

Technic, Brick 1 x 1 with Axle Hole

Minifigure, Shield Circular / Round Convex Face with Red and White Concentric Rings, Star in Blue Circle Pattern (Captain America)

Minifigure, Utensil Tool Sledgehammer (Mjolnir, Hammer)

Sticker Sheet for Set 76266 - (10104736/6449552)

Slope, Inverted 45 2 x 2 with Hollow Round Bottom Tube

×2

Plate, Modified 1 x 2 with Clip on End (Vertical Grip)

Plate 1 x 5

×3

Plate 1 x 5

Wedge, Plate 6 x 2 Right

×2

Plate, Round 1 x 1 with Bar Handle on Long Stem

×3

Plate, Round 1 x 1 with Open Stud

×8

Plate, Round 1 x 1 with Open Stud

×3

Plate, Round 1 x 1 with Open Stud

×8

Plate, Round 1 x 1 with Open Stud

×15

Tile 2 x 4

×15

Tile 2 x 4

Brick, Modified 1 x 1 with Stud on Side

×2

Panel 1 x 2 x 2 with Side Supports - Hollow Studs

×8

Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper)

Brick, Modified Facet 2 x 2

×2

Bar 3L (Bar Arrow)

×4

Technic, Pin 1/2 with Friction Ridges

×2

Brick, Modified 2 x 2 with Channels and Axle Hole

×6

Minifigure, Weapon Pike / Spear - Handle with Flat End

Support 2 x 2 x 10 Girder Triangular Vertical - Type 4 - 3 Posts, 3 Sections

×3

Brick and Axle Separator

Tile, Round 1 x 1

×5

Tile, Round 1 x 1

×3

Brick, Modified 1 x 2 with Masonry Profile

×24

Technic Rotor Blade Small with Axle and Pin Connector End

×2

Bracket 1 x 2 - 1 x 2 Inverted

×2

Endgame Final Battle

About Endgame Final Battle

Part-out value

Seller notes

Minifigures in Endgame Final Battle (6)

Parts (246)

Common questions about Endgame Final Battle

How much is LEGO Endgame Final Battle (76266-1) worth?

What minifigures come in LEGO set 76266-1?

Is it worth parting out LEGO Endgame Final Battle?

Is LEGO Endgame Final Battle (76266-1) retired?

How do I check if my Endgame Final Battle set is complete?

More Super Heroes sets

Explore more

Company

Legal