How much is LEGO Reznor Knockdown - Expansion Set (71390-1) worth?

Reznor Knockdown - Expansion Set sells for an average of $24.34 used and $33.55 new/sealed on BrickLink based on 6 months of completed sales. As a retired set, prices tend to hold steady or appreciate over time, especially for complete sets with original packaging. Actual prices vary with completeness. Missing minifigures or key parts will lower the value.

What minifigures come in LEGO set 71390-1?

This set includes 4 minifigures: Reznor ($3.88), Reznor with Fireball ($4.29), Grrrol ($1.97), Blue Toad - Surprised ($4.29). The minifigures have a combined BrickLink value of $14.43. Each figure is linked above with individual pricing if you're looking to buy or sell specific characters.

Is it worth parting out LEGO Reznor Knockdown - Expansion Set?

The minifigures make up about 59% of the set value ($14.43 out of $24.34). Most of the value is in the complete set package, so selling it whole is likely the better move unless you have buyers lined up for specific figures.

Is LEGO Reznor Knockdown - Expansion Set (71390-1) retired?

Yes, Reznor Knockdown - Expansion Set was released in 2021 and has been retired from retail for several years. Retired LEGO sets are only available on the secondary market through BrickLink, eBay, or other resale platforms.

How do I check if my Reznor Knockdown - Expansion Set set is complete?

Use the parts list on this page to check every piece and all 4 minifigures. For the minifigures specifically, you can use the brick'em scanner to identify each figure from a photo and confirm it matches what should be in this set. Missing pieces can be individually sourced on BrickLink.

Reznor Knockdown - Expansion Set

71390-1·Super Mario·2021·4 minifigs·242 parts

Used Avg

$24.34

New Avg

$33.55

Add to your inventory Scan the minifigs

About Reznor Knockdown - Expansion Set

Reznor Knockdown - Expansion Set (71390-1) is a LEGO Super Mario set released in 2021, currently averaging $24.34 used on BrickLink. It comes with 4 minifigures worth a combined $14.43. The set has retired from retail, so secondary market is the only option. The full parts inventory runs 242 pieces.

Parts (242)

Plate, Modified 2 x 2 with Pin Hole - Full Cross Support Underneath

×3

Tile, Modified 2 x 2 Inverted

Plate 3 x 3

Plate, Round 6 x 6 with Hole

×3

Bracket 5 x 2 x 1 1/3 with 2 Holes and Bottom Tube

×6

Slope, Curved 2 x 1 x 2/3

×4

Tile, Round 2 x 2 with Bottom Stud Holder

×4

Tile, Round 2 x 2 with Bottom Stud Holder

Slope, Curved 2 x 2 x 2/3

×2

Slope, Curved 2 x 2 x 2/3

Plate, Modified 2 x 2 with Pins on Bottom

Technic, Axle 5L with Stop

Tile, Round 2 x 2 with Hole

×8

Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)

×2

Plate, Round Half 3 x 6 with 1 x 2 Cutout

Technic, Axle 2L with Pin with Friction Ridges

Technic, Liftarm Thick 1 x 1 (Spacer)

×2

Technic, Liftarm Thick 1 x 1 (Spacer)

×2

Bracket 3 x 2 x 1 1/3 with Bottom Tube

×2

Plate, Modified 1 x 2 with Pin Hole on Bottom

×2

Fence 4 x 4 x 2 Quarter Round Spindled with 3 Studs

Slope 45 1 x 1 x 2/3 Quadruple Convex Pyramid

×7

Slope 45 1 x 1 x 2/3 Quadruple Convex Pyramid

Brick, Modified 1 x 2 x 1 2/3 with Studs on Side

×2

Brick, Modified 1 x 2 x 1 2/3 with Studs on Side

×6

Plate, Round Half 4 x 8

×2

Brick 2 x 2 Corner

×2

Plate 2 x 2 Corner

×5

Tile 1 x 4

×2

Tile 1 x 4

×2

Tile 1 x 4

×2

Tile 1 x 4

×3

Technic, Axle 3L with Stop

×5

Wedge, Plate 3 x 3 Cut Corner

×2

Cylinder Half 2 x 4 x 2 with 1 x 2 Cutout

×2

Plate, Modified 2 x 2 with Pin on Bottom

×4

Plate, Round 1 x 1 with Flower Edge (5 Petals)

×3

Tile, Round 1 x 1 Quarter

×5

Tile, Round 1 x 1 Quarter

×9

Plate, Modified 2 x 4 with Pin Holes

Wedge, Plate 2 x 2 Cut Corner

×6

Technic, Disk 3 x 3

Tile, Round Corner 4 x 4 Macaroni

×2

Technic, Pin with Short Friction Ridges

×13

Tile, Round Corner 2 x 2 Macaroni

×8

Slope 45 2 x 1 with Cutout without Stud

×4

Slope 45 2 x 1 with Cutout without Stud

×4

Brick 2 x 4

×2

Brick 2 x 2

×5

Brick 1 x 2

×2

Brick 1 x 2

×3

Brick 1 x 2

×2

Brick 1 x 2 with White Question Mark Pattern

Brick 1 x 1

×2

Brick 1 x 8

Brick 1 x 4

×4

Brick 1 x 4

Brick, Modified 1 x 2 with Log Profile

×2

Brick, Modified 1 x 4 with Log Profile

×2

Plate 2 x 4

×2

Plate 2 x 4

×2

Plate 2 x 4

×5

Plate 2 x 4

×8

Plate 2 x 4

Plate 2 x 3

×8

Plate 2 x 2

×4

Plate 2 x 2

×2

Plate 1 x 2

×4

Plate 1 x 2

×2

Plate 1 x 2

×27

Plate 1 x 2

×9

Plate 1 x 2

×2

Plate 1 x 1

×5

Plate 1 x 1

×3

Plate 1 x 1

×3

Plate 1 x 1

×10

Plate 4 x 12

Plate 2 x 8

×2

Plate 2 x 8

×2

Plate 4 x 8

Slope 45 2 x 2

Slope 45 2 x 1

×4

Brick, Modified 1 x 4 with Studs on Side

Slope 45 2 x 2 Double

Brick, Round 1 x 1

×3

Brick, Round 1 x 1

×13

Tile 2 x 2 with Super Mario Scanner Code Question Mark Block Pattern (Sticker) - Sets 30385 / 71360 / 71369 / 71387 / 71390 / 71403 / 71412 / 71432 / 71437 / 71439 / 77907

Tile 2 x 2 with Super Mario Scanner Code Coins and 'START' Pattern (Sticker) - Sets 71390 / 71434

Tile 2 x 2 with Super Mario Scanner Code Grrrol Pattern (Sticker) - Set 71390

×2

Tile 2 x 2 with White Stopwatch and Coins Pattern

Tile 2 x 2 with Super Mario Scanner Code Blue Toad Speech Bubble with Exclamation Mark Pattern (Sticker) - Sets 71390 / 71401 / 71407 / 71423 / 71441

Tile 1 x 2

×4

Tile 1 x 2

×4

Tile 1 x 2

×3

Tile 1 x 2

×2

Tile 1 x 2

×6

Tile 1 x 1

×3

Technic, Brick 1 x 2 with Holes

×2

Technic, Plate 2 x 6 with 5 Holes

×4

Technic, Axle and Pin Connector Angled #6 - 90 degrees

Technic, Pin 3L with Friction Ridges and Stop Bush

×2

Technic, Brick 1 x 2 with Axle Hole

×2

Technic, Brick 1 x 2 with Axle Hole

Technic, Axle and Pin Connector Perpendicular 3L with Center Pin Hole

Technic, Gear 20 Tooth Bevel

Technic, Liftarm Thick 1 x 5

Brick 1 x 2 x 2 with Inside Stud Holder

×3

Technic Ball Joint

Technic, Liftarm Thick 1 x 3

Technic, Liftarm Thick 1 x 7

×5

Technic, Liftarm Thick 1 x 7

×2

Technic, Pin 3L without Friction Ridges

×4

Plant Plate, Round 1 x 1 with 3 Layered Leaves

×2

Brick, Modified 1 x 1 x 1 2/3 with Studs on Side

×3

Slope 33 3 x 4

Tile, Modified 2 x 2 with Studs on Edge

×2

Tile, Modified 2 x 2 with Studs on Edge

×2

Tile, Modified 2 x 2 with Studs on Edge

×2

Plate 1 x 8

Plate, Round 4 x 4 Gear 10 Tooth

×4

Plate, Round 1 x 2 with Open Studs

×4

Plate, Round 1 x 2 with Open Studs

×3

Brick 1 x 3

×2

Plate 1 x 3

×4

Slope, Inverted 45 2 x 2 with Flat Bottom Pin

Slope, Inverted 45 2 x 1

×6

Plate 1 x 6

×8

Plate 1 x 6

×5

Plate 1 x 6

×6

Technic, Pin without Friction Ridges

×10

Technic, Brick 1 x 2 with Hole

×8

Technic, Brick 1 x 2 with Hole

Technic, Brick 1 x 4 with Holes

Technic, Brick 1 x 16 with Holes

Technic, Plate 2 x 4 with 3 Holes

Plate 1 x 4

×2

Plate 1 x 4

×6

Plate 1 x 4

Technic, Plate 2 x 8 with 7 Holes

×4

Wave Rounded Straight Single with Small Pin End (Candle Flame)

×4

Plate 2 x 6

×4

Plate 2 x 6

Plate 2 x 10

×5

Plate 2 x 10

Technic, Brick 1 x 6 with Holes

×2

Technic, Brick 1 x 6 with Holes

×2

Brick, Round 2 x 2 with Axle Hole

×14

Plate, Round 2 x 2 with Axle Hole

×3

Plate, Round 2 x 2 with Axle Hole

×2

Plate, Round 2 x 2 with Axle Hole

×9

Plate, Round 2 x 2 with Axle Hole

×2

Technic, Liftarm Thick 1 x 9

×2

Brick, Modified 1 x 1 with Headlight

×2

Plate, Round 1 x 1

×22

Tile 1 x 8

×2

Plate, Modified 1 x 4 with 2 Studs with Groove

×3

Technic Bush 1/2 Smooth

×2

Technic Bush 1/2 Smooth

×2

Technic, Pin 1/2 without Friction Ridges

×2

Slope, Inverted 33 3 x 1

×4

Technic, Axle 1L with Pin with Friction Ridges

×3

Support 1 x 1 x 6 Solid Pillar

×2

Bracket 1 x 2 - 2 x 2

×9

Technic, Axle Connector Double - Flexible Rubber

×2

Slope 30 1 x 1 x 2/3

×8

Slope 30 1 x 1 x 2/3

×3

Technic, Axle 8L with Stop

Plate, Round Corner 6 x 6

Plate, Round 4 x 4 with Hole

×2

Plate, Modified 1 x 2 with Bar Handle on End

×2

Technic, Liftarm, Modified T-Shape Thick 3 x 3

Window 1 x 2 x 2 Flat Front

×2

Brick 1 x 12

Turntable 4 x 4 Square Base, Locking

×5

Brick, Round 4 x 4 with 4 Side Pin Holes and Center Axle Hole

×2

Technic, Pin Connector Round 2L with Slot (Pin Joiner Round)

Tile 1 x 3

×2

Plate, Modified 1 x 2 with Clip on End (Horizontal Grip)

×2

Technic, Brick 1 x 1 with Hole

×2

Plate, Modified 2 x 4 with 2 Studs (Double Jumper)

×2

Technic, Pin 3L with Friction Ridges

Technic, Axle 3L with Stud

Technic, Gear 12 Tooth Bevel

Technic, Pin with Friction Ridges and Tow Ball with Round Pin Hole

Tile 1 x 6

×5

Tile 1 x 6

Cylinder Warp Pipe 6 x 6 x 3 1/3

Plate, Modified 6 x 6 with Rounded Corners and 4 Feet

Plate, Modified 4 x 4 with Rounded Corners and 4 Feet

×3

Plate, Modified 4 x 4 with Rounded Corners and 4 Feet

×2

Plate, Modified 4 x 4 with Rounded Corners and 4 Feet

×5

Plate, Modified 4 x 4 with Rounded Corners and 4 Feet with Super Mario Scanner Code Rotating Platforms Pattern (Sticker) - Set 71390

×2

Plate, Modified 4 x 4 with Rounded Corners and 4 Feet with Super Mario Scanner Code Skewer Pattern (Sticker) - Set 71390

Tile 2 x 6

×2

Tile 2 x 6

Bracket 1 x 1 - 1 x 2 Inverted

×2

Plate, Modified 2 x 3 with 1 x 1 Cutout

×2

Plate, Round 4 x 8 x 2/3, Raised 2 x 8 and 2 x 2 Cutout

Bracket 5 x 2 x 2 1/3 with 2 Holes and Bottom Stud Holder

×2

Plate, Modified 4 x 4 with Rounded Corners and 4 Feet with 2 x 2 Open Center

×2

Plate, Modified 4 x 4 with Rounded Corners and 4 Feet with 2 x 2 Open Center

×2

Tile, Round Corner 3 x 3 Macaroni

×4

Brick, Round Corner 2 x 2 Macaroni with Stud Notch and Reinforced Underside

×8

Slope 30 1 x 2 x 2/3

×2

Tile 2 x 4

×2

Technic, Axle 4L with Stop

×4

Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper)

×2

Plate 2 x 14

×3

Slope 45 2 x 1 with 2/3 Cutout

×4

Arch 1 x 6 Raised Arch

×2

Slope, Curved 4 x 1 x 2/3 Double

×4

Brick and Axle Separator

Tile, Round 1 x 1

×4

Tile, Round 1 x 1

×6

Brick, Modified 1 x 2 with Masonry Profile

×2

Bracket 1 x 2 - 2 x 2 Inverted

×11

Reznor Knockdown - Expansion Set

About Reznor Knockdown - Expansion Set

Part-out value

Minifigures in Reznor Knockdown - Expansion Set (4)

Parts (242)

Common questions about Reznor Knockdown - Expansion Set

How much is LEGO Reznor Knockdown - Expansion Set (71390-1) worth?

What minifigures come in LEGO set 71390-1?

Is it worth parting out LEGO Reznor Knockdown - Expansion Set?

Is LEGO Reznor Knockdown - Expansion Set (71390-1) retired?

How do I check if my Reznor Knockdown - Expansion Set set is complete?

More Super Mario sets

Explore more

Company

Legal