About Entryway - Expansion Set
Entryway - Expansion Set (71399-1) is a LEGO Super Mario set released in 2022, currently averaging $27.43 used on BrickLink. It comes with 3 minifigures worth a combined $8.76. The set has retired from retail, so secondary market is the only option. The full parts inventory runs 162 pieces.
Part-out value
The minifigures account for about 32% of the set's value ($8.76 out of $27.43). The remaining value is in the parts and the set as a complete package. Selling complete will likely net more than parting out unless you have specific demand for the individual figures.
Seller notes
- Sealed copies sell for $44.91 vs $27.43 used — a 64% premium. If you have this set new in sealed box (NISB), price it accordingly.
Minifigures in Entryway - Expansion Set (3)
Parts (162)
Tile 6 x 6 with Bottom Tubes, Textured Surface
Light Bluish Gray
Bar Holder with Clip
Reddish Brown
Brick, Modified 1 x 2 with Studs on 1 Side
Light Bluish Gray×4
Plate, Modified 1 x 2 with Pin Hole on Top
Reddish Brown×2
Slope, Curved 2 x 1 x 2/3
Black×3
Wedge 2 x 2 (Slope 45 Corner)
Black×4
Brick 1 x 1 x 3
Tan×4
Tile, Round 2 x 2 with Bottom Stud Holder
Light Bluish Gray
Slope, Curved 2 x 2 x 2/3
Light Bluish Gray×4
Arch 1 x 6 x 2 - Medium Thick Top without Reinforced Underside
Dark Green×2
Plate, Modified 2 x 2 with Tow Ball and Hole
Black×4
Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)
Dark Red
Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)
Light Bluish Gray×6
Tile, Modified 1 x 1 with Open O Clip
Black×2
Tile, Round 2 x 2 with Open Stud
Yellow
Plate, Round Corner 2 x 6 Double
Black×2
Fence 1 x 4 x 2 Ornamental with 4 Studs
Black×2
Window 1 x 4 x 1 2/3 with Spoked Rounded Top
Reddish Brown×2
Brick, Modified 1 x 1 with Scroll with Hollow Stud
Light Bluish Gray×2
Tile, Round 1 x 1 with Bar and Small Pin Hole
Black×5
Tile, Round 1 x 1 with Bar and Small Pin Hole
Light Bluish Gray×4
Slope 45 1 x 1 x 2/3 Quadruple Convex Pyramid
Black×3
Bar 1L with Tow Ball
Dark Bluish Gray×2
Technic, Axle and Pin Connector Hub with 1L Axle
Light Bluish Gray×2
Arch 1 x 5 x 4 - Continuous Bow
Reddish Brown×2
Brick 2 x 2 Corner
Light Bluish Gray×8
Plate 2 x 2 Corner
Light Bluish Gray×4
Hinge Plate 1 x 4 Swivel (2429 / 2430)
Dark Bluish Gray
Tile 1 x 4
Tan×2
Tile 1 x 4
Dark Red
Tile 1 x 4
Light Bluish Gray×2
Plate 2 x 12
Reddish Brown×3
Wedge, Plate 3 x 3 Cut Corner
Dark Green×4
Brick 2 x 6
Dark Green×2
Brick 2 x 6
Dark Bluish Gray
Plate, Round 1 x 1 with Flower Edge (5 Petals)
Green×3
Tile, Round 1 x 1 Quarter
Black×3
Tile, Round 1 x 1 Quarter
Dark Orange×5
Tile, Round 1 x 1 Quarter
Light Bluish Gray×5
Brick, Modified 1 x 4 with Channel
Black×2
Plate, Round 2 x 2 with Rounded Bottom (Boat Stud)
Reddish Brown×7
Tile 2 x 3
Dark Red
Tile 2 x 3
Light Bluish Gray×2
Tile 2 x 3
Reddish Brown
Tile, Modified Facet 2 x 2
Black×4
Tile, Round Corner 4 x 4 Macaroni
Light Bluish Gray×2
Technic, Pin with Short Friction Ridges
Black×2
Tile, Round Corner 2 x 2 Macaroni
Dark Bluish Gray×4
Plant Stem, Curved with Bar, Thorns, and Swirls
Black×2
Plant Stem, Curved with Bar, Thorns, and Swirls
Light Bluish Gray×2
Spider with Elongated Abdomen
Black
Brick 2 x 3
Light Bluish Gray×6
Brick 2 x 2
Blue
Brick 1 x 2
Dark Green×22
Brick 1 x 1
Tan×8
Brick 1 x 1
Dark Green×22
Brick 2 x 8
Dark Bluish Gray
Brick 1 x 6
Light Bluish Gray×2
Brick 1 x 4
Dark Green×4
Brick 1 x 4
Light Bluish Gray×3
Brick, Modified 1 x 2 with Log Profile
Light Bluish Gray×10
Brick, Modified 1 x 2 with Log Profile
Reddish Brown×4
Brick, Modified 1 x 4 with Log Profile
Reddish Brown×4
Plate 2 x 4
Tan
Plate 2 x 4
Dark Red
Plate 2 x 4
Dark Bluish Gray×2
Plate 2 x 4
Light Bluish Gray×4
Plate 2 x 4
Reddish Brown×3
Plate 2 x 3
Light Bluish Gray×3
Plate 2 x 2
Light Bluish Gray×6
Plate 1 x 2
Black×9
Plate 1 x 2
Light Bluish Gray×12
Plate 1 x 1
Dark Red×2
Plate 1 x 1
Dark Bluish Gray×3
Plate 1 x 1
Dark Purple
Plate 4 x 6
Light Bluish Gray
Plate 4 x 6
Reddish Brown×3
Plate 2 x 8
Light Bluish Gray
Plate 2 x 8
Reddish Brown
Plate 6 x 8
Dark Bluish Gray
Plate, Round Corner 4 x 4
Reddish Brown×2
Brick, Round 1 x 1
Black×2
Tile 2 x 2
Tan×2
Tile 2 x 2
Black
Tile 2 x 2
Dark Bluish Gray×3
Tile 2 x 2
Reddish Brown×6
Tile 2 x 2 with Super Mario Scanner Code 'START' in 2 Corners Pattern (Sticker) - Sets 71397 / 71399 / 71401
Dark Green
Tile 2 x 2 with Super Mario Scanner Code Gold Bone Pattern (Sticker) - Set 71399
Yellow
Tile 2 x 2 with Super Mario Scanner Code Keyhole Pattern (Sticker) - Set 71399
Light Bluish Gray×2
Tile 2 x 2 with Super Mario Scanner Code Polterpup Pattern (Sticker) - Set 71399
Light Aqua
Tile 1 x 2
Light Bluish Gray×3
Tile 1 x 2
Reddish Brown×2
Tile 1 x 2
Trans-Orange×2
Technic, Brick 1 x 2 with Holes
Light Bluish Gray
Technic, Axle and Pin Connector Angled #5 - 112.5 degrees
Dark Bluish Gray
Plate, Modified 1 x 2 with Door Rail
Dark Tan×2
Technic, Brick 1 x 2 with Axle Hole
Light Bluish Gray×2
Technic, Plate 1 x 5 with Smooth Ends, 4 Studs and Center Axle Hole
Black×4
Tile, Modified 2 x 2 with Studs on Edge
Dark Bluish Gray×6
Plate 1 x 8
Light Bluish Gray×3
Plate, Round 4 x 4 Gear 10 Tooth
Dark Bluish Gray
Brick 1 x 3
Light Bluish Gray
Technic, Pin without Friction Ridges
Light Bluish Gray×2
Plate 1 x 4
Reddish Brown
Slope, Curved 1 x 2 with Bottom Stud Holder
Dark Bluish Gray
Slope, Inverted 33 3 x 2 with Flat Bottom Pin and Connections between Studs
Light Bluish Gray×2
Wave Rounded Straight Single with Small Pin End (Candle Flame)
Trans-Light Blue×3
Wave Rounded Straight Single with Small Pin End (Candle Flame)
Trans-Orange×2
Plate 2 x 6
Dark Bluish Gray
Plate 2 x 6
Light Bluish Gray×3
Cone 2 x 2 x 2 - Open Stud
Dark Bluish Gray
Plate, Round 2 x 2 with Axle Hole
Light Bluish Gray×2
Plate, Round 1 x 1
Reddish Brown×4
Plate, Round 1 x 1
Dark Purple
Tile 1 x 8
Light Bluish Gray
Plate, Modified 1 x 4 with 2 Studs with Groove
Black×2
Technic, Pin 1/2 without Friction Ridges
Light Bluish Gray×6
Plate 2 x 16
Dark Bluish Gray
Hinge Plate 2 x 4 with Pin Hole and 2 Holes - Top
Light Bluish Gray
Hinge Plate 2 x 4 with Pin Hole and 2 Holes - Bottom
Black
Tap 1 x 1 without Hole in Nozzle End
Black×3
Dish 2 x 2 Inverted (Radar)
Dark Bluish Gray×3
Slope, Curved 1 x 1 x 2/3 Double
Dark Red×2
Slope, Curved 1 x 1 x 2/3 Double
Light Bluish Gray×4
Barb / Claw / Horn / Tooth - Small
White
Slope 30 1 x 1 x 2/3
White
Brick, Modified 1 x 1 with Clip (Horizontal Grip)
Light Bluish Gray×2
Window 1 x 4 x 3 - No Shutter Tabs
Reddish Brown×2
Pane for Window 1 x 2 x 3 with Thick Corner Tabs
Black×4
Slope, Curved 2 x 1 x 1 1/3 with Recessed Stud
Light Bluish Gray×2
Turntable 4 x 4 Square Base, Locking
Black
Panel 1 x 1 x 1 Corner
Reddish Brown×2
Plate, Modified 2 x 2 with Tow Ball Socket, Short, Flattened with Holes and Axle Hole in Center
Light Bluish Gray×4
Tile 1 x 3
Dark Red×2
Tile 1 x 3
Reddish Brown×2
Technic, Axle 3L with Stud
Dark Tan
Tile 1 x 6
Dark Red×2
Tile 1 x 6
Light Bluish Gray×9
Plate, Modified 6 x 6 with Rounded Corners and 4 Feet
Bright Green
Plate, Modified 6 x 6 with Rounded Corners and 4 Feet
Medium Nougat×2
Plate, Modified 4 x 4 with Rounded Corners and 4 Feet
Bright Green
Plate, Modified 4 x 4 with Rounded Corners and 4 Feet
Light Bluish Gray×2
Cylinder Half 1 x 2 x 1
Light Bluish Gray×4
Tile, Modified 4 x 4 with Rounded Corners and 4 Feet
Light Bluish Gray
Tile, Modified 4 x 4 with Rounded Corners and 4 Feet
Medium Nougat×3
Plate, Round 1 x 1 with Open Stud
White
Plate, Round 1 x 1 with Open Stud
Red×2
Plate, Round 1 x 1 with Open Stud
Black×5
Tile 2 x 4
Dark Bluish Gray×3
Tile 2 x 4
Light Bluish Gray×2
Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper)
Light Bluish Gray×2
Bar 5L with Handle (Friction Ram)
Reddish Brown
Bar 3L (Bar Arrow)
Black×3
Horn, Unicorn / Spiral
Dark Purple
Plate, Round 4 x 6 x 2/3, Raised 2 x 6 and 2 x 2 Cutout
Medium Nougat×2
Plate 2 x 14
Light Bluish Gray×2
Brick, Round 2 x 2 with Axle Hole and Grille / Fluted Profile
Light Bluish Gray×4
Slope, Curved 4 x 2
Light Bluish Gray×2
Minifigure, Utensil Bucket 1 x 1 x 1 Tapered with Handle Holders
Reddish Brown
Minifigure, Utensil Bucket 1 x 1 x 1 Handle / Scooter Stand
Black×2
Tile, Round 1 x 1
Light Bluish Gray×2
Tile, Round 1 x 1
Olive Green×4Common questions about Entryway - Expansion Set
How much is LEGO Entryway - Expansion Set (71399-1) worth?
Entryway - Expansion Set sells for an average of $27.43 used and $44.91 new/sealed on BrickLink based on 6 months of completed sales. As a retired set, prices tend to hold steady or appreciate over time, especially for complete sets with original packaging. Actual prices vary with completeness — missing minifigures or key parts will lower the value.
What minifigures come in LEGO set 71399-1?
This set includes 3 minifigures: Bogmire ($3.28), Polterpup ($3.02), Boo - Antenna Stand ($2.46). The minifigures have a combined BrickLink value of $8.76. Each figure is linked above with individual pricing if you're looking to buy or sell specific characters.
Is it worth parting out LEGO Entryway - Expansion Set?
The minifigures make up about 32% of the set value ($8.76 out of $27.43). Most of the value is in the complete set package, so selling it whole is likely the better move unless you have buyers lined up for specific figures.
Is LEGO Entryway - Expansion Set (71399-1) retired?
Yes, Entryway - Expansion Set was released in 2022 and has been retired from retail for several years. Retired LEGO sets are only available on the secondary market through BrickLink, eBay, or other resale platforms.
How do I check if my Entryway - Expansion Set set is complete?
Use the parts list on this page to check every piece and all 3 minifigures. For the minifigures specifically, you can use the brick'em scanner to identify each figure from a photo and confirm it matches what should be in this set. Missing pieces can be individually sourced on BrickLink.