How much is LEGO Haunt-and-Seek - Expansion Set (71401-1) worth?

Haunt-and-Seek - Expansion Set sells for an average of $88.40 used and $99.59 new/sealed on BrickLink based on 6 months of completed sales. As a retired set, prices tend to hold steady or appreciate over time, especially for complete sets with original packaging. Actual prices vary with completeness. Missing minifigures or key parts will lower the value.

What minifigures come in LEGO set 71401-1?

This set includes 4 minifigures: Toad - Scared ($7.73), Garbage Can Ghost ($4.05), Grabbing Ghost ($4.40), King Boo - Dark Purple Tongue ($17.11). The minifigures have a combined BrickLink value of $33.28. Each figure is linked above with individual pricing if you're looking to buy or sell specific characters.

Is it worth parting out LEGO Haunt-and-Seek - Expansion Set?

The minifigures make up about 38% of the set value ($33.28 out of $88.40). Most of the value is in the complete set package, so selling it whole is likely the better move unless you have buyers lined up for specific figures.

Is LEGO Haunt-and-Seek - Expansion Set (71401-1) retired?

Yes, Haunt-and-Seek - Expansion Set was released in 2022 and has been retired from retail for several years. Retired LEGO sets are only available on the secondary market through BrickLink, eBay, or other resale platforms.

How do I check if my Haunt-and-Seek - Expansion Set set is complete?

Use the parts list on this page to check every piece and all 4 minifigures. For the minifigures specifically, you can use the brick'em scanner to identify each figure from a photo and confirm it matches what should be in this set. Missing pieces can be individually sourced on BrickLink.

Haunt-and-Seek - Expansion Set

71401-1·Super Mario·2022·4 minifigs·244 parts

Used Avg

$88.40

New Avg

$99.59

Add to your inventory Scan the minifigs

About Haunt-and-Seek - Expansion Set

Haunt-and-Seek - Expansion Set (71401-1) is a LEGO Super Mario set released in 2022, currently averaging $88.40 used on BrickLink. It comes with 4 minifigures worth a combined $33.28. The set has retired from retail, so secondary market is the only option. The full parts inventory runs 244 pieces.

Parts (244)

Plate, Modified 2 x 2 with Pin Hole - Full Cross Support Underneath

×2

Tile, Modified 2 x 2 Inverted with Super Mario Scanner Code Coin, Triangle Corner Pattern (Sticker) - Set 71401

Brick, Modified 1 x 2 with Studs on 1 Side

×4

Brick, Modified 1 x 2 with Studs on 1 Side

×2

Slope, Curved 2 x 1 x 2/3

×4

Tile, Round 2 x 2 with Bottom Stud Holder

×2

Slope, Curved 2 x 2 x 2/3

×5

Slope, Curved 2 x 2 x 2/3

×13

Plate, Modified 2 x 2 with Pins on Bottom

×3

Arch 1 x 6 x 2 - Medium Thick Top without Reinforced Underside

×3

Tile, Round 2 x 2 with Hole

Slope 45 2 x 1 Triple with Bottom Stud Holder

×2

Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)

×4

Wedge, Plate A-Shape with 2 Rows of 4 Studs

×4

Tile, Modified 1 x 1 with Open O Clip

×4

Technic, Axle 2L with Pin with Friction Ridges

Technic, Liftarm Thick 1 x 1 (Spacer)

×2

Technic, Liftarm Thick 1 x 1 (Spacer)

×4

Plate, Modified 1 x 2 with Pin Hole on Bottom

Plate, Round Corner 2 x 6 Double

×2

Plate, Round Corner 2 x 6 Double

Fence 1 x 4 x 2 Ornamental with 4 Studs

×2

Brick, Modified 1 x 2 x 1 2/3 with Studs on Side

Minifigure, Utensil Goblet

Brick 2 x 2 Corner

×2

Brick 2 x 2 Corner

×5

Tile, Modified 1 x 2 Grille with Bottom Groove

Wedge, Plate 3 x 6 Cut Corners

Slope, Curved 2 x 1 x 2/3 Inverted

Hinge Plate 1 x 4 Swivel (2429 / 2430)

Tile 1 x 4

×9

Tile 1 x 4

Wedge, Plate 3 x 3 Cut Corner

×4

Brick 1 x 2 x 5

×4

Tile, Modified 2 x 2 with Pin

×3

Plate, Round 1 x 1 with Flower Edge (5 Petals)

×3

Tile, Round 1 x 1 Quarter

×21

Tile, Round 1 x 1 Quarter

×5

Tile, Round 1 x 1 Quarter

×5

Plate, Round 2 x 2 with Rounded Bottom (Boat Stud)

Tile, Modified Facet 2 x 2

×4

Technic, Pin with Short Friction Ridges

×15

Plant Stem, Curved with Bar, Thorns, and Swirls

×4

Spider with Elongated Abdomen

Brick 2 x 3

×2

Brick 2 x 2

×3

Brick 2 x 2

Brick 1 x 2

×5

Brick 1 x 2

×14

Pane for Window 1 x 2 x 2 2/3 Lattice Diamond with Rounded Top

Brick 1 x 1

×2

Brick 1 x 8

Brick 1 x 6

×2

Brick 1 x 4

×4

Brick 1 x 4

×2

Brick 1 x 4

Brick, Modified 1 x 2 with Log Profile

×9

Brick, Modified 1 x 2 with Log Profile

×2

Rock 1 x 1 Jewel 24 Facet

Plate 2 x 4

×3

Plate 2 x 4

×2

Plate 2 x 4

×16

Plate 2 x 3

×4

Plate 2 x 3

×2

Plate 2 x 2

×6

Plate 2 x 2

×2

Plate 2 x 2

×3

Plate 2 x 2

×2

Plate 2 x 2

Plate 1 x 2

×3

Plate 1 x 2

×3

Plate 1 x 2

×4

Plate 1 x 2

×6

Plate 1 x 2

×9

Plate 1 x 2

Brick, Modified 1 x 2 with Open O Clip Thick (Vertical Grip)

Plate 4 x 4

Plate 4 x 6

×2

Plate 2 x 8

×3

Plate 2 x 8

×4

Plate 2 x 8

×4

Plate 2 x 8

×4

Bar 4L (Lightsaber Blade / Wand)

×2

Slope 45 2 x 1

×4

Brick, Modified 1 x 4 with Studs on Side

×2

Slope 45 2 x 2 Double Convex Corner

×2

Slope 45 2 x 2 Double Convex Corner

×2

Brick, Round 1 x 1

×2

Brick, Round 1 x 1

×18

Brick, Round 1 x 1

×8

Brick 1 x 2 without Bottom Tube

×2

Brick 1 x 2 without Bottom Tube

×2

Brick 1 x 2 without Bottom Tube

×2

Tile 2 x 2

×10

Tile 2 x 2

×11

Tile 2 x 2 with Super Mario Scanner Code Blue Toad Speech Bubble with Exclamation Mark Pattern (Sticker) - Sets 71390 / 71401 / 71407 / 71423 / 71441

Tile 2 x 2 with Super Mario Scanner Code 2 Arrows Cycle Pattern (Sticker) - Set 71401

Tile 2 x 2 with Super Mario Scanner Code Hidden Gem Pattern 3 (Sticker) - Set 71401

Tile 2 x 2 with Super Mario Scanner Code Hidden Gem Pattern 1 (Sticker) - Set 71401

Tile 2 x 2 with Super Mario Scanner Code Hidden Gem Pattern 2 (Sticker) - Set 71401

Tile 2 x 2 with Super Mario Scanner Code Coin, Round Corner Pattern (Sticker) - Set 71401

Tile 2 x 2 with Super Mario Scanner Code Coin, Square Corner Pattern (Sticker) - Set 71401

Tile 2 x 2 with Super Mario Scanner Code 'START' in 2 Corners Pattern (Sticker) - Sets 71397 / 71399 / 71401

Tile 1 x 2

×4

Tile 1 x 2

×10

Tile 1 x 2

×4

Technic, Brick 1 x 2 with Holes

×3

Technic, Liftarm Thin 1 x 6

×2

Technic, Liftarm, Modified Bent Thick L-Shape 2 x 4

×2

Technic, Liftarm Thick 1 x 5

×2

Technic, Liftarm Thick 1 x 5

×6

Technic, Liftarm Thin 1 x 4 - Axle Holes

×6

Brick 1 x 2 x 2 with Inside Stud Holder

×2

Technic, Liftarm, Modified Bent Thick L-Shape 3 x 5

×2

Technic, Pin 3L without Friction Ridges

Plant Plate, Round 1 x 1 with 3 Layered Leaves

×16

Plant Plate, Round 1 x 1 with 3 Layered Leaves

×2

Slope, Curved 2 x 2 x 2/3 Inverted

×2

Brick, Modified 1 x 1 x 1 2/3 with Studs on Side

×4

Banana

Tile, Modified 2 x 2 with Studs on Edge

×14

Tile, Modified 2 x 2 with Studs on Edge

×2

Plate, Modified 1 x 3 with 2 Studs (Double Jumper)

×2

Plate 1 x 8

×2

Plate 1 x 8

Tile, Modified 2 x 2 Triangular

×2

Tile, Modified 2 x 2 Triangular

×2

Plate 1 x 3

×2

Arch 1 x 4

×4

Arch 1 x 4

×4

Slope, Inverted 45 2 x 2 with Flat Bottom Pin

×4

Plate 1 x 6

×3

Plate 1 x 6

×5

Technic, Pin without Friction Ridges

×24

Technic, Brick 1 x 2 with Hole

×8

Technic, Axle 4L

×3

Plate 1 x 4

×2

Plate 1 x 4

×8

Plate 1 x 4

×4

Plate 1 x 4

×8

Plate 1 x 4

×2

Technic, Plate 2 x 8 with 7 Holes

Technic, Axle 1L with Pin without Friction Ridges with Round Hole

×3

Minifigure, Utensil Candle

×3

Wave Rounded Straight Single with Small Pin End (Candle Flame)

×4

Plate 2 x 6

×3

Plate 2 x 10

×2

Plate 2 x 10

×2

Brick, Round 2 x 2 with Axle Hole

×4

Plate, Round 2 x 2 with Axle Hole

Window 1 x 2 x 3 Train

×2

Brick, Modified 1 x 1 with Headlight

×6

Brick, Modified 1 x 1 with Headlight

×8

Plate, Round 1 x 1

×18

Plate, Round 1 x 1

×3

Plate, Round 1 x 1

×2

Tile 1 x 8

×2

Plate, Modified 1 x 4 with 2 Studs with Groove

Technic, Axle and Pin Connector Perpendicular 3L with 2 Pin Holes

Technic Bush 1/2 Smooth

×5

Technic, Pin 1/2 without Friction Ridges

Support 1 x 1 x 6 Solid Pillar

×6

Bracket 1 x 2 - 2 x 2

×2

Plate 1 x 10

×2

Plate, Modified 1 x 2 with Bar Handle on Side - Closed Ends

×2

Bar 1L with Clip Mechanical Claw - Cut Edges and Hole on Side

×3

Brick, Round 3 x 3 x 1 1/3 Dome Top - Open Stud

Slope 30 1 x 1 x 2/3

×2

Slope 30 1 x 1 x 2/3

×5

Slope 30 1 x 1 x 2/3

×3

Plate, Modified 1 x 2 with 2 Open O Clips (Horizontal Grip)

Plate, Round 4 x 4 with Hole

Brick, Modified 1 x 1 with Open O Clip (Vertical Grip) - Hollow Stud

×2

Technic, Liftarm Thick 1 x 2 - Axle Hole

×2

Slope, Curved 2 x 1 x 1 1/3 with Recessed Stud

×8

Turntable 4 x 4 Square Base, Locking

Technic, Pin Connector Round 2L with Slot (Pin Joiner Round)

×3

Door 1 x 4 x 6 Round Top with Window and Keyhole, Reinforced Edge

Minifigure, Utensil Telescope

×4

Plate, Modified 4 x 4 with 2 x 2 Open Center

Plate, Round 8 x 8 with Rounded Corners

Technic, Axle and Pin Connector Perpendicular

×2

Technic, Brick 1 x 1 with Hole

×2

Tile 1 x 6

Plate, Modified 6 x 6 with Rounded Corners and 4 Feet

×2

Plate, Modified 8 x 8 with Rounded Corners and 4 Feet

Plate, Modified 4 x 4 with Rounded Corners and 4 Feet

×3

Plate, Modified 4 x 4 with Rounded Corners and 4 Feet

×9

Plate, Modified 4 x 4 with Rounded Corners and 4 Feet with Super Mario Scanner Code 2 Arrows Pattern (Sticker) - Sets 71401 / 71412 / 71436

Technic, Brick 2 x 4 x 1 1/3 with Axle Holes and 2 x 2 Cutout

Arch 1 x 3 Inverted

×6

Technic, Liftarm, Modified Perpendicular Holes Thick 1 x 15

×2

Minifigure, Utensil Candlestick / Candelabra

Bracket 1 x 1 - 1 x 2 Inverted

×4

Plate, Round 4 x 8 x 2/3, Raised 2 x 8 and 2 x 2 Cutout

×3

Plate, Modified 4 x 4 with Rounded Corners and 4 Feet with 2 x 2 Open Center

Bracket 1 x 1 - 1 x 2

×2

Plate, Round 1 x 1 with Open Stud

×3

Slope 30 1 x 2 x 2/3

×2

Slope 30 1 x 2 x 2/3

×2

Slope 30 1 x 2 x 2/3

Tile 2 x 4

×4

Tile 2 x 4

×4

Brick, Modified 1 x 1 with Stud on Side

×2

Brick, Modified 1 x 1 with Stud on Side

Panel 1 x 2 x 3 with Side Supports - Hollow Studs

×2

Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper)

×2

Brick, Modified Facet 2 x 2

×4

Tile, Modified 3 x 4 with 4 Studs in Center

Slope, Curved 2 x 4 x 2/3 with Bottom Tubes

×4

Plate, Round 4 x 6 x 2/3, Raised 2 x 6 and 2 x 2 Cutout

×2

Spider Web Flat with Hollow Stud, Bar Ends, and Bar

Plate 2 x 14

Slope 45 2 x 1 with 2/3 Cutout

×4

Slope 45 2 x 1 with 2/3 Cutout

×2

Arch 1 x 6 Raised Arch

Bracket 1 x 2 - 2 x 4

×2

Brick and Axle Separator

Tile, Round 1 x 1

×5

Tile, Round 1 x 1

×7

Tile, Round 1 x 1

×2

Bracket 1 x 2 - 2 x 2 Inverted

×10

Bracket 1 x 2 - 1 x 2 Inverted

×3

Haunt-and-Seek - Expansion Set

About Haunt-and-Seek - Expansion Set

Part-out value

Minifigures in Haunt-and-Seek - Expansion Set (4)

Parts (244)

Common questions about Haunt-and-Seek - Expansion Set

How much is LEGO Haunt-and-Seek - Expansion Set (71401-1) worth?

What minifigures come in LEGO set 71401-1?

Is it worth parting out LEGO Haunt-and-Seek - Expansion Set?

Is LEGO Haunt-and-Seek - Expansion Set (71401-1) retired?

How do I check if my Haunt-and-Seek - Expansion Set set is complete?

More Super Mario sets

Explore more

Company

Legal