brick'em
Shredder's Dragon Bike

Shredder's Dragon Bike

79101-1·Teenage Mutant Ninja Turtles·2013·3 minifigs·88 parts

Used Avg
$41.79
New Avg
$83.20
Add to your inventoryScan the minifigs

About Shredder's Dragon Bike

Shredder's Dragon Bike (79101-1) is a LEGO Teenage Mutant Ninja Turtles set from 2013 that sells for around $41.79 used on BrickLink. It includes 3 minifigures with a combined resale value of $35.35 — that's 85% of the set's price in figures alone. The most valuable is Shredder - Dark Blue Cape at $20.20. For sellers buying complete sets to part out, the minifig value here makes this one worth considering.

Part-out value

The minifigures in this set are worth $35.35 individually on BrickLink — 85% of the complete set price ($41.79). The figs carry almost all the value here. If you find this set incomplete or are buying to part out, the minifigures are where the money is.

Seller notes

  • Sealed copies sell for $83.20 vs $41.79 used — a 99% premium. If you have this set new in sealed box (NISB), price it accordingly.
  • Shredder - Dark Blue Cape ($20.20) is the most valuable minifig in this set. If you're buying this set secondhand, check that this figure is included — it's often the first one pulled by sellers who part out.

Minifigures in Shredder's Dragon Bike (3)

Foot Soldier - Robot
Foot Soldier - Robot
tnt011$1.91
Donatello, Frown
Donatello, Frown
tnt019$13.24
Shredder - Dark Blue Cape
Shredder - Dark Blue Cape
tnt020$20.20

Parts (88)

Flag 2 x 2 Square with Flat Edge
Flag 2 x 2 Square with Flat Edge
Black×3
Plate 2 x 2 Corner
Plate 2 x 2 Corner
Black×4
Plate 2 x 2 Corner
Plate 2 x 2 Corner
Reddish Brown
Tile 1 x 4
Tile 1 x 4
Reddish Brown×2
Bracket 1 x 2 - 1 x 4
Bracket 1 x 2 - 1 x 4
Black×2
Plate, Modified 1 x 2 with Bar Handle on Side - Free Ends
Plate, Modified 1 x 2 with Bar Handle on Side - Free Ends
Light Bluish Gray
Tile, Modified 1 x 1 with Clip
Tile, Modified 1 x 1 with Clip
Dark Bluish Gray×3
Technic, Pin with Short Friction Ridges
Technic, Pin with Short Friction Ridges
Black×5
Tire 14mm D. x 9mm Smooth Small Wide Slick
Tire 14mm D. x 9mm Smooth Small Wide Slick
Black×4
Brick 1 x 2
Brick 1 x 2
Black×2
Minifigure, Weapon Sword, Shamshir / Katana (Square Guard) with Uncapped Pommel and Hole in Hilt
Minifigure, Weapon Sword, Shamshir / Katana (Square Guard) with Uncapped Pommel and Hole in Hilt
Flat Silver×2
Plate 2 x 4
Plate 2 x 4
Tan×3
Plate 2 x 3
Plate 2 x 3
Light Bluish Gray
Plate 2 x 2
Plate 2 x 2
Light Bluish Gray
Plate 1 x 2
Plate 1 x 2
Yellow×2
Plate 1 x 2
Plate 1 x 2
Dark Bluish Gray×4
Plate 4 x 6
Plate 4 x 6
Dark Bluish Gray
Plate 2 x 8
Plate 2 x 8
Reddish Brown
Hinge Plate 1 x 8 with Angled Side Extensions
Hinge Plate 1 x 8 with Angled Side Extensions
Black
Brick, Modified 1 x 2 with Pins
Brick, Modified 1 x 2 with Pins
Light Bluish Gray×4
Tile 2 x 2 with Map Street Level with Red 'X' Pattern
Tile 2 x 2 with Map Street Level with Red 'X' Pattern
Tan
Plate, Modified 2 x 3 with Hole
Plate, Modified 2 x 3 with Hole
Black×2
Technic, Axle and Pin Connector Angled #1
Technic, Axle and Pin Connector Angled #1
Dark Bluish Gray×2
Technic, Liftarm Thin 1 x 5
Technic, Liftarm Thin 1 x 5
Light Bluish Gray×2
Tire 62.4 x 20 S
Tire 62.4 x 20 S
Black
Technic, Liftarm Thin 1 x 7
Technic, Liftarm Thin 1 x 7
Black×2
Technic, Axle  5L
Technic, Axle 5L
Light Bluish Gray
Technic, Plate 1 x 5 with Smooth Ends, 4 Studs and Center Axle Hole
Technic, Plate 1 x 5 with Smooth Ends, 4 Studs and Center Axle Hole
Black×2
Plate 1 x 6
Plate 1 x 6
Red×2
Technic Bush
Technic Bush
Red×3
Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)
Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)
Black
Plate 2 x 6
Plate 2 x 6
Red
Minifigure, Weapon Lance
Minifigure, Weapon Lance
Black
Plate, Round 1 x 1
Plate, Round 1 x 1
Trans-Yellow×2
Plate, Round 1 x 1
Plate, Round 1 x 1
Dark Bluish Gray×5
Plate, Round 1 x 1
Plate, Round 1 x 1
Flat Silver×5
Plate, Round 1 x 1
Plate, Round 1 x 1
Trans-Orange×7
Plate, Modified 1 x 1 with Light Attachment - Thick Ring
Plate, Modified 1 x 1 with Light Attachment - Thick Ring
Yellow
Plate, Modified 1 x 1 with Light Attachment - Thick Ring
Plate, Modified 1 x 1 with Light Attachment - Thick Ring
Black×6
Propeller 8 Blade 5 Diameter
Propeller 8 Blade 5 Diameter
Light Bluish Gray×2
Wedge, Plate 4 x 2 Right
Wedge, Plate 4 x 2 Right
Black
Wedge, Plate 4 x 2 Left
Wedge, Plate 4 x 2 Left
Black
Technic Bush 1/2 Smooth
Technic Bush 1/2 Smooth
Light Bluish Gray×3
Technic, Pin 1/2 without Friction Ridges
Technic, Pin 1/2 without Friction Ridges
Light Bluish Gray×4
Technic, Axle  1L with Pin with Friction Ridges
Technic, Axle 1L with Pin with Friction Ridges
Blue×2
Hinge Plate 1 x 2 Locking with 1 Finger on Side with Bottom Groove
Hinge Plate 1 x 2 Locking with 1 Finger on Side with Bottom Groove
Dark Bluish Gray
Brick, Round 1 x 1 with Fins
Brick, Round 1 x 1 with Fins
Dark Bluish Gray×4
Cone 1 x 1 with Top Groove
Cone 1 x 1 with Top Groove
Trans-Orange×2
Antenna Small Base with Black Lever (4592 / 4593)
Antenna Small Base with Black Lever (4592 / 4593)
Yellow×2
Tap 1 x 1 without Hole in Nozzle End
Tap 1 x 1 without Hole in Nozzle End
Black×3
Tap 1 x 1 without Hole in Nozzle End
Tap 1 x 1 without Hole in Nozzle End
Light Bluish Gray×2
Plate, Modified 1 x 2 with Bar Arm Up (Horizontal Arm 5mm)
Plate, Modified 1 x 2 with Bar Arm Up (Horizontal Arm 5mm)
Red
Pneumatic T Piece Second Version (T Bar with Ball in Center)
Pneumatic T Piece Second Version (T Bar with Ball in Center)
Light Bluish Gray×2
Slope, Curved 3 x 2 x 2/3 with 2 Studs, Wing End
Slope, Curved 3 x 2 x 2/3 with 2 Studs, Wing End
Black×2
Slope, Inverted 45 4 x 2 Double with 2 x 2 Cutout
Slope, Inverted 45 4 x 2 Double with 2 x 2 Cutout
Dark Bluish Gray
Vehicle, Air Scoop Engine Top 2 x 2
Vehicle, Air Scoop Engine Top 2 x 2
Olive Green
Wedge, Plate 2 x 4
Wedge, Plate 2 x 4
Black
Barb / Claw / Horn / Tooth - Small
Barb / Claw / Horn / Tooth - Small
Black×3
Slope 30 1 x 1 x 2/3
Slope 30 1 x 1 x 2/3
Red×9
Slope 30 1 x 1 x 2/3
Slope 30 1 x 1 x 2/3
Black×9
Tire 43.2 x 14 Offset Tread
Tire 43.2 x 14 Offset Tread
Black
Wheel 30mm D. x 14mm
Wheel 30mm D. x 14mm
Light Bluish Gray
Plate, Modified 1 x 2 with Bar Handle on End
Plate, Modified 1 x 2 with Bar Handle on End
Black×2
Technic, Axle  9L
Technic, Axle 9L
Light Bluish Gray
Slope, Curved 2 x 1 x 1 1/3 with Recessed Stud
Slope, Curved 2 x 1 x 1 1/3 with Recessed Stud
Black×4
Technic, Pin 1/2 with 2L Bar Extension (Flick Missile)
Technic, Pin 1/2 with 2L Bar Extension (Flick Missile)
Light Bluish Gray×2
Plate, Modified 1 x 1 with Open O Clip (Horizontal Grip)
Plate, Modified 1 x 1 with Open O Clip (Horizontal Grip)
Yellow
Wave Rounded Straight with Bar End (Castle Dragon Flame / Seaweed / Water)
Wave Rounded Straight with Bar End (Castle Dragon Flame / Seaweed / Water)
Trans-Orange×2
Plate, Modified 1 x 2 with Angular Extension with Molded Flexible Rubber Black Tip Pattern
Plate, Modified 1 x 2 with Angular Extension with Molded Flexible Rubber Black Tip Pattern
Black
Slope 18 2 x 1 x 2/3 with Grille
Slope 18 2 x 1 x 2/3 with Grille
Black×4
Plate, Modified 2 x 2 with Wheels Holder Wide and Hole
Plate, Modified 2 x 2 with Wheels Holder Wide and Hole
Black×2
Slope, Curved 4 x 1
Slope, Curved 4 x 1
Black×2
Technic, Pin Connector Round 2L with Slot (Pin Joiner Round)
Technic, Pin Connector Round 2L with Slot (Pin Joiner Round)
Light Bluish Gray×4
Tile 1 x 3
Tile 1 x 3
Red×2
Minifigure, Utensil Telescope
Minifigure, Utensil Telescope
Dark Brown
Slope, Inverted 45 4 x 4 Double with 2 Holes
Slope, Inverted 45 4 x 4 Double with 2 Holes
Dark Bluish Gray
Wheel  8mm D. x 9mm for Slicks, Hole Notched for Wheels Holder Pin, Reinforced Back
Wheel 8mm D. x 9mm for Slicks, Hole Notched for Wheels Holder Pin, Reinforced Back
Light Bluish Gray×4
Hose, Rigid 3mm D.  3L / 2.4cm
Hose, Rigid 3mm D. 3L / 2.4cm
Reddish Brown×3
Sticker Sheet for Set 79101 - (13499/6030149)
Sticker Sheet for Set 79101 - (13499/6030149)
(Not Applicable)
Technic, Liftarm, Modified Bar Angled 1 x 2
Technic, Liftarm, Modified Bar Angled 1 x 2
Black
Wheel 43.2mm D. x 18mm - Flush Axle Stem
Wheel 43.2mm D. x 18mm - Flush Axle Stem
Light Bluish Gray
Minifigure, Weapon Bladed Claw
Minifigure, Weapon Bladed Claw
Flat Silver×3
Plate, Modified 1 x 2 with Clip with Center Cut on Top
Plate, Modified 1 x 2 with Clip with Center Cut on Top
Light Bluish Gray×2
Plate, Modified 1 x 4 with 2 Studs without Groove
Plate, Modified 1 x 4 with 2 Studs without Groove
Black
Slope, Curved 4 x 1 x 2/3 Double
Slope, Curved 4 x 1 x 2/3 Double
Black
Minifigure, Weapon Crescent Blade, Serrated with Bar
Minifigure, Weapon Crescent Blade, Serrated with Bar
Flat Silver
Bracket 1 x 2 - 2 x 2 Inverted
Bracket 1 x 2 - 2 x 2 Inverted
Light Bluish Gray×2
Technic Wishbone Suspension Arm
Technic Wishbone Suspension Arm
Black×2

Common questions about Shredder's Dragon Bike

How much is LEGO Shredder's Dragon Bike (79101-1) worth?

Shredder's Dragon Bike sells for an average of $41.79 used and $83.20 new/sealed on BrickLink based on 6 months of completed sales. As a retired set, prices tend to hold steady or appreciate over time, especially for complete sets with original packaging. Actual prices vary with completeness — missing minifigures or key parts will lower the value.

What minifigures come in LEGO set 79101-1?

This set includes 3 minifigures: Foot Soldier - Robot ($1.91), Donatello, Frown ($13.24), Shredder - Dark Blue Cape ($20.20). The minifigures have a combined BrickLink value of $35.35. Each figure is linked above with individual pricing if you're looking to buy or sell specific characters.

Is it worth parting out LEGO Shredder's Dragon Bike?

The minifigures alone are worth $35.35 (85% of the $41.79 set price), so parting out the figs individually on BrickLink can be profitable. Start with Shredder - Dark Blue Cape at $20.20 — it's the highest-value figure in the set.

Is LEGO Shredder's Dragon Bike (79101-1) retired?

Yes, Shredder's Dragon Bike was released in 2013 and has been retired from retail for several years. Retired LEGO sets are only available on the secondary market through BrickLink, eBay, or other resale platforms.

How do I check if my Shredder's Dragon Bike set is complete?

Use the parts list on this page to check every piece and all 3 minifigures. For the minifigures specifically, you can use the brick'em scanner to identify each figure from a photo and confirm it matches what should be in this set. Missing pieces can be individually sourced on BrickLink.

Explore more

All Teenage Mutant Ninja Turtles setsTeenage Mutant Ninja Turtles minifiguresMost valuable Teenage Mutant Ninja Turtles figsFree scanner