About Movie Maker
Movie Maker (70820-1) is a LEGO The LEGO Movie 2 set released in 2019, currently averaging $23.13 used on BrickLink. It comes with 6 minifigures worth a combined $13.02. The set has retired from retail, so secondary market is the only option. The full parts inventory runs 209 pieces.
Part-out value
Minifig value: $13.02 out of $23.13 total (56%). Over half the set's resale value is in the figures. Sellers parting this set out should list the minifigs individually on BrickLink — they'll earn more than bundling everything together.
Seller notes
- Sealed copies sell for $41.29 vs $23.13 used — a 79% premium. If you have this set new in sealed box (NISB), price it accordingly.
Minifigures in Movie Maker (6)
Parts (209)
Minifigure, Weapon Bladed Claw, Spread
Flat Silver
Bar Holder with Clip
Black×3
Bar Holder with Clip
Dark Bluish Gray×7
Tile, Modified 2 x 2 Inverted
Dark Bluish Gray×2
Plate, Modified 1 x 2 with Pin Hole on Top
Blue
Slope, Curved 2 x 1 x 2/3
White×2
Slope, Curved 2 x 1 x 2/3
Black
Slope, Curved 2 x 1 x 2/3
Medium Azure×2
Technic, Liftarm Thin 1 x 5 - Axle Holes
Black×4
Plate, Round 1 x 1 with Star and Small Pin Hole
Magenta×3
Minifigure, Weapon Space Ray Gun - Rounded Heat Diffusers
White
Wheel 18mm D. x 8mm with Fake Bolts and Deep Spokes with Inner Ring
Black×2
Tile, Round 2 x 2 with Bottom Stud Holder with Eye with Medium Azure Iris and Black Pupil Pattern
Red
Slope, Curved 2 x 2 x 2/3
Yellow
Slope, Curved 2 x 2 x 2/3
Red
Slope, Curved 2 x 2 x 2/3
Sand Blue
Slope, Curved 2 x 2 x 2/3
Dark Bluish Gray×11
Plate, Modified 2 x 2 with Pins on Bottom
Dark Bluish Gray
Tile, Round 2 x 2 with Hole
Red×3
Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)
Red
Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)
Dark Bluish Gray×6
Tile, Modified 1 x 1 with Open O Clip
Reddish Brown×4
Plate, Round Half 3 x 6 with 1 x 2 Cutout
Black
Tile, Round 2 x 2 with Open Stud
Dark Bluish Gray×3
Plate, Modified 1 x 2 with Pin Hole on Bottom
Red
Tile, Round 1 x 1 with Bar and Small Pin Hole
White×3
Plate, Modified 1 x 2 with Wheel Holder
Light Bluish Gray
Tile, Modified 2 x 3 Pentagonal
Lime
Tile, Modified 2 x 3 Pentagonal
Dark Blue
Plate, Round Half 4 x 8
Dark Bluish Gray×2
Technic, Axle and Pin Connector Hub with 1L Axle
Red×2
Plate 2 x 2 Corner
Lime
Plate 2 x 2 Corner
Dark Blue
Plate 2 x 2 Corner
Bright Light Orange×4
Tile 1 x 4
Dark Bluish Gray
Tile 1 x 4
Bright Light Orange
Tile, Modified 1 x 2 with Bar Handle
Dark Bluish Gray×2
Plate 2 x 12
Black
Brick 1 x 2 x 5
Trans-Clear
Tile, Round 1 x 1 Quarter
White×3
Tile, Round 1 x 1 Quarter
Dark Turquoise×3
Plate, Modified 1 x 2 with Bar Handle on Side - Free Ends
Dark Bluish Gray×3
Minifigure, Weapon Crossbow
Pearl Dark Gray
Plate, Round 1 x 1 with Bar Handle
Black
Plate, Round 2 x 2 with Rounded Bottom (Boat Stud)
Black
Tile, Modified Facet 2 x 2
Lime
Tile, Modified Facet 2 x 2
Dark Blue
Slope 45 2 x 1 with Cutout without Stud
Dark Blue
Slope 45 2 x 1 with Cutout without Stud
Dark Bluish Gray
Wedge 2 x 1 x 2/3 Right
White×2
Wedge 2 x 1 x 2/3 Right
Dark Blue
Wedge 2 x 1 x 2/3 Left
White×2
Wedge 2 x 1 x 2/3 Left
Dark Blue
Brick 1 x 1
Yellow×3
Brick 1 x 4 with Lime Rectangle Half and Two Eyes Pattern
Yellow
Slope, Curved 2 x 2 Double with 2 Hollow Studs
Red
Plate 2 x 3
Red×2
Plate 2 x 3
Dark Blue×2
Plate 2 x 3
Medium Azure
Plate 2 x 2
Orange
Plate 2 x 2
Red
Plate 2 x 2
Blue
Plate 1 x 2
Yellow×4
Plate 1 x 2
Orange×6
Plate 1 x 2
Red×5
Plate 1 x 2
Dark Turquoise×3
Plate 1 x 2
Dark Bluish Gray×5
Plate 1 x 2
Bright Light Orange×5
Brick, Modified 1 x 2 with Open O Clip Thick (Vertical Grip)
Red×2
Plate 1 x 1
Red×2
Plate 1 x 1
Blue×2
Plate 1 x 1
Dark Turquoise×3
Plate 4 x 4
Black×4
Tile, Modified 2 x 3 with 2 Open O Clips
Trans-Light Blue
Brick, Round 1 x 1
Dark Blue
Brick 1 x 2 without Bottom Tube
Trans-Brown
Tile 1 x 2
Yellow
Tile 1 x 2
Red×6
Tile 1 x 2
Blue
Tile 1 x 2
Sand Blue
Tile 1 x 2
Light Bluish Gray×2
Tile 1 x 1
Sand Blue×3
Plate, Modified 2 x 3 with Hole
Dark Bluish Gray×4
Technic, Brick 1 x 2 with Holes
Red×4
Technic, Plate 2 x 6 with 5 Holes
Black
Technic, Axle and Pin Connector Angled #1
Light Bluish Gray
Plate, Modified 1 x 2 with Door Rail
Black
Technic, Pin 3L with Friction Ridges and Stop Bush
Black×4
Technic, Axle 2L Notched
Red
Technic, Liftarm, Modified Bent Thick 1 x 7 (4 - 4)
Black×2
Technic, Pin Connector Perpendicular Double 3L
Light Bluish Gray×2
Plant Flower with Bar and Small Pin Hole
Bright Light Orange×2
Tile, Modified 2 x 2 with Studs on Edge
Yellow
Tile, Modified 2 x 2 with Studs on Edge
Red
Bar 1 x 4 x 1 2/3 (Grille Guard / Push Bumper)
Black
Brick 1 x 3
Red
Plate 1 x 3
White×2
Slope, Inverted 45 2 x 1
Black×2
Plate 1 x 6
Bright Light Orange×2
Technic, Pin without Friction Ridges
Light Bluish Gray×3
Bracket 1 x 1 - 1 x 1
Light Bluish Gray
Slope 75 2 x 2 x 3 - Solid Studs
Black
Technic, Brick 1 x 2 with Hole
Dark Bluish Gray×2
Technic, Axle 6L
Black
Technic, Axle 12L
Black×5
Technic, Plate 2 x 4 with 3 Holes
Dark Bluish Gray×8
Plate 1 x 4
Dark Bluish Gray
Slope, Curved 1 x 2 with Bottom Stud Holder
White×2
Technic, Axle 1L with Pin without Friction Ridges with Round Hole
Tan×4
Dinosaur Baby Standing with Blue Markings and Yellow Eyes Pattern
Dark Blue
Minifigure, Utensil Cup
White
Antenna 4H - Round Top
Trans-Clear
Plate 6 x 6
Black
Plate, Round 4 x 4 x 2/3 with Star and Open Stud
Yellow
Tile, Round 1 x 1 Heart
Dark Pink×2
Plate, Round 2 x 2 with Axle Hole
Light Bluish Gray×2
Plate, Round 2 x 2 with Axle Hole
Reddish Brown
Brick, Modified 1 x 1 with Headlight
Dark Bluish Gray×4
Plate, Round 1 x 1
Trans-Yellow×5
Plate, Round 1 x 1
Lime×2
Plate, Round 1 x 1
Trans-Dark Pink×3
Plate, Round 1 x 1
Light Bluish Gray×5
Minifigure, Utensil Seat / Chair 2 x 2
Red
Plate, Modified 1 x 1 with Light Attachment - Thick Ring
Lime×2
Plate, Modified 1 x 1 with Light Attachment - Thick Ring
Dark Bluish Gray×2
Tile 1 x 8
Dark Bluish Gray×6
Technic, Liftarm Thin 1 x 2 - Axle Holes
Red×4
Technic, Axle and Pin Connector Perpendicular 3L with 2 Pin Holes
Red
Wheel 11mm D. x 8mm with Center Groove, 4 Spokes
Light Bluish Gray×4
Technic, Pin 1/2 without Friction Ridges
Light Bluish Gray×2
Plate 2 x 16
Dark Bluish Gray×2
Slope, Inverted 33 3 x 1
Dark Bluish Gray
Technic, Axle 1L with Pin with Friction Ridges
Blue
Dish 3 x 3 Inverted (Radar)
Trans-Clear
Dish 3 x 3 Inverted (Radar)
Dark Turquoise
Vehicle, Mudguard 2 x 4 with Headlights Overhang
Red
Flag 2 x 2 Trapezoid with Flat Edge
Sand Blue×2
Flag 2 x 2 Trapezoid with Flat Edge
Dark Blue×2
Bracket 1 x 2 - 2 x 2
White
Bracket 1 x 2 - 2 x 2
Yellow
Technic, Axle 3L
Yellow×9
Technic, Axle Connector Double - Flexible Rubber
Black
Plate, Modified 1 x 2 with Bar Arm Up (Horizontal Arm 5mm)
Red×3
Plate, Modified 1 x 2 with Bar Arm Up (Horizontal Arm 5mm)
Dark Bluish Gray×2
Pneumatic T Piece Second Version (T Bar with Ball in Center)
Light Bluish Gray×3
Dish 2 x 2 Inverted (Radar)
Trans-Dark Pink×2
Brick, Modified 1 x 1 with Studs on 2 Sides, Opposite
Light Bluish Gray
Bar 1L with Clip Mechanical Claw - Cut Edges and Hole on Side
Orange
Bar 1L with Clip Mechanical Claw - Cut Edges and Hole on Side
Light Bluish Gray×5
Slope, Curved 3 x 1
Dark Turquoise
Brick, Modified 1 x 2 with Studs on 2 Sides
Light Bluish Gray
Slope, Inverted 45 6 x 1 Double with 1 x 4 Cutout
Dark Bluish Gray
Slope 30 1 x 1 x 2/3
Orange
Slope 30 1 x 1 x 2/3
Red
Slope 30 1 x 1 x 2/3
Trans-Dark Pink×2
Slope 30 1 x 1 x 2/3
Dark Red
Slope 30 1 x 1 x 2/3
Dark Purple
Slope 30 1 x 1 x 2/3
Bright Light Orange
Technic, Axle 8L with Stop
Dark Bluish Gray×2
Plate, Modified 1 x 2 with 2 Open O Clips (Horizontal Grip)
Red×2
Plate, Modified 1 x 2 with 2 Open O Clips (Horizontal Grip)
Black×2
Brick, Modified 1 x 1 with Open O Clip (Vertical Grip) - Hollow Stud
Red
Plate, Modified 1 x 2 with Bar Handle on End
White×3
Plate, Modified 1 x 2 with Bar Handle on End
Black×2
Plate 1 x 12
Black×3
Panel 1 x 4 x 3 with Side Supports - Hollow Studs
Black×3
Minifigure, Utensil Hose Nozzle Elaborate
Black×5
Minifigure, Utensil Hose Nozzle Elaborate
Light Bluish Gray×3
Slope, Curved 2 x 1 x 1 1/3 with Recessed Stud
Orange×2
Slope, Curved 2 x 1 x 1 1/3 with Recessed Stud
Red×2
Bar 1 x 4 x 2
Light Bluish Gray×2
Tile, Modified 6 x 16 with Studs on Edges
Dark Bluish Gray×4
Bar 1 x 4 x 3 Grille with End Protrusions
Dark Bluish Gray×2
Brick, Modified 2 x 2 with Pin and Axle Hole
Red×2
Technic, Universal Joint 3L
Light Bluish Gray
Minifigure, Weapon Gun, Pistol Automatic Medium Barrel
Black
Plate, Modified 1 x 2 with Clip on End (Horizontal Grip)
Black
Bar 6L with Stop Ring
Black×2
Minifigure, Weapon Sword, Spike Flexible 3.5L with Bar End
Black
Technic, Axle Connector 2L (Smooth with x Hole + Orientation)
Red×3
Technic, Axle Connector 2L (Smooth with x Hole + Orientation)
Black×6
Technic, Pin 3L with Friction Ridges
Blue×2
Plate, Modified 1 x 6 with Train Wagon End / Fence
Dark Bluish Gray
Paper Cardboard Backdrop for Set 70820, Apocalypseburg Scene / Queen Watevra's 'So-Not-Evil' Space Palace Scene
(Not Applicable)
Plate, Round 1 x 1 with Open Stud
White×5
Plate, Round 1 x 1 with Open Stud
Black×4
Plate, Round 1 x 1 with Open Stud
Lime×2
Plate, Round 1 x 1 with Open Stud
Dark Bluish Gray
Plate, Round 1 x 1 with Open Stud
Reddish Brown
Slope 30 1 x 2 x 2/3
Dark Bluish Gray×7
Tile 2 x 4
Black
Technic, Pin 3L with Friction Ridges and Center Pin Hole
Black
Brick, Modified 1 x 1 with Stud on Side
Red×2
Brick, Modified 1 x 1 with Stud on Side
Black×2
Panel 1 x 2 x 2 with Side Supports - Hollow Studs
Yellow
Panel 1 x 2 x 2 with Side Supports - Hollow Studs
Trans-Clear×2
Panel 1 x 2 x 2 with Side Supports - Hollow Studs
Trans-Light Blue
Tile, Modified 3 x 4 with 4 Studs in Center
Black×2
Horn, Unicorn / Spiral
Red
Tire 17.5mm D. x 6mm with Shallow Staggered Treads - Band Around Center of Tread
Black×4
Arm Skeleton, Bent with Clips (Horizontal Grip)
Dark Bluish Gray×3
Support 2 x 2 x 10 Girder Triangular Vertical - Type 4 - 3 Posts, 3 Sections
Black×4
Cone 2 x 2 Truncated
Light Bluish Gray
Tile, Round 1 x 1
Trans-Clear×5
Plate, Modified 2 x 2 x 2/3 with 2 Studs on Side - Solid Bottom Tube
Red
Bracket 1 x 2 - 2 x 2 Inverted
White
Bracket 1 x 2 - 2 x 2 Inverted
Red
Bracket 1 x 2 - 1 x 2 Inverted
Dark Bluish Gray
Bar 12L with 1 x 2 Plate End Hollow Studs and 1 x 1 Round Plate End
Trans-Clear×6Common questions about Movie Maker
How much is LEGO Movie Maker (70820-1) worth?
Movie Maker sells for an average of $23.13 used and $41.29 new/sealed on BrickLink based on 6 months of completed sales. As a retired set, prices tend to hold steady or appreciate over time, especially for complete sets with original packaging. Actual prices vary with completeness — missing minifigures or key parts will lower the value.
What minifigures come in LEGO set 70820-1?
This set includes 6 minifigures: Lucy Wyldstyle with Magenta Lined Hoodie ($1.54), Sweet Mayhem - Crooked Smile, Raised Eyebrow, Hair ($1.83), Unikitty - Warrior Kitty, Angry Face, Poseable ($4.22), Emmet - Lopsided Grin / Confused, Worn Uniform ($1.76), plus 2 more. The minifigures have a combined BrickLink value of $13.02. Each figure is linked above with individual pricing if you're looking to buy or sell specific characters.
Is it worth parting out LEGO Movie Maker?
The minifigures make up about 56% of the set value ($13.02 out of $23.13). Most of the value is in the complete set package, so selling it whole is likely the better move unless you have buyers lined up for specific figures.
Is LEGO Movie Maker (70820-1) retired?
Yes, Movie Maker was released in 2019 and has been retired from retail for several years. Retired LEGO sets are only available on the secondary market through BrickLink, eBay, or other resale platforms.
How do I check if my Movie Maker set is complete?
Use the parts list on this page to check every piece and all 6 minifigures. For the minifigures specifically, you can use the brick'em scanner to identify each figure from a photo and confirm it matches what should be in this set. Missing pieces can be individually sourced on BrickLink.