How much is LEGO Rex's Rexplorer! (70835-1) worth?

Rex's Rexplorer! sells for an average of $70.73 used and $89.28 new/sealed on BrickLink based on 6 months of completed sales. As a retired set, prices tend to hold steady or appreciate over time, especially for complete sets with original packaging. Actual prices vary with completeness. Missing minifigures or key parts will lower the value.

What minifigures come in LEGO set 70835-1?

This set includes 2 minifigures: Rex Dangervest - Smile, Teeth / Angry ($1.66), Emmet - Wink Smile / Scared, Worn Uniform ($1.84). The minifigures have a combined BrickLink value of $3.51. Each figure is linked above with individual pricing if you're looking to buy or sell specific characters.

Is it worth parting out LEGO Rex's Rexplorer!?

The minifigures make up about 5% of the set value ($3.51 out of $70.73). Most of the value is in the complete set package, so selling it whole is likely the better move unless you have buyers lined up for specific figures.

Is LEGO Rex's Rexplorer! (70835-1) retired?

Yes, Rex's Rexplorer! was released in 2019 and has been retired from retail for several years. Retired LEGO sets are only available on the secondary market through BrickLink, eBay, or other resale platforms.

How do I check if my Rex's Rexplorer! set is complete?

Use the parts list on this page to check every piece and all 2 minifigures. For the minifigures specifically, you can use the brick'em scanner to identify each figure from a photo and confirm it matches what should be in this set. Missing pieces can be individually sourced on BrickLink.

Rex's Rexplorer!

70835-1·The LEGO Movie 2·2019·2 minifigs·286 parts

Used Avg

$70.73

New Avg

$89.28

Add to your inventory Scan the minifigs

About Rex's Rexplorer!

Rex's Rexplorer! (70835-1) is a LEGO The LEGO Movie 2 set released in 2019, currently averaging $70.73 used on BrickLink. It comes with 2 minifigures worth a combined $3.51. The set has retired from retail, so secondary market is the only option. The full parts inventory runs 286 pieces.

Parts (286)

Technic, Axle and Pin Connector Hub with 2 Perpendicular Axles

×2

Plant Leaves 6 x 5 Swordleaf with Open O Clip Thick

Tile, Modified 2 x 2 Inverted

×4

Brick, Modified 1 x 2 with Studs on 1 Side

×2

Brick, Modified 1 x 2 with Studs on 1 Side

×13

Brick, Modified 1 x 2 with Studs on 1 Side

×16

Plate 3 x 3

×2

Technic, Axle 1L with Pin 2L with Friction Ridges

Bracket 5 x 2 x 1 1/3 with 2 Holes and Bottom Tube

×4

Plate, Modified 4 x 4 with 2 Open O Clips (Horizontal Grip)

×2

Plate, Modified 1 x 2 with Pin Hole on Top

×2

Plate, Modified 1 x 2 with Clip on Side (Horizontal Grip)

Slope, Curved 2 x 1 x 2/3

Wedge 6 x 4 Cutout (Train Roof) with 5 Large Bottom Tubes

×2

Wedge 6 x 4 Cutout (Train Roof) with 5 Large Bottom Tubes

×7

Tile 2 x 2 Corner

×4

Slope, Curved 2 x 2 x 2/3

Minifigure, Weapon Gun, Blaster 1 x 2 x 2/3 with Studs on Sides and Handle

×2

Technic, Pin with Friction Ridges and Pin Hole

×2

Road Sign 2 x 2 Square with Open O Clip

Projectile Launcher, 1 x 4 Spring Shooter with Light Bluish Gray Top

×2

Projectile Arrow, Bar 8L with Round End (Spring Shooter Dart)

×4

Projectile Launcher Part, Trigger for Gun, Mini Blaster / Shooter

×8

Projectile Launcher, 1 x 2 Mini Blaster / Shooter

×7

Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)

×8

Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)

×2

Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)

×6

Tile, Modified 1 x 1 with Open O Clip

×3

Arch 1 x 8 x 2 Raised

×4

Plate, Modified 1 x 2 with Bar Handles on Ends

Arch 1 x 3 x 2 Inverted

×3

Technic, Liftarm Thick 1 x 1 (Spacer)

×2

Plate, Modified 1 x 2 with Pin Hole on Bottom

×4

Tile, Round 1 x 1 with Bar and Small Pin Hole

×3

Windscreen 8 x 4 x 2 with 2 Studs and Bar Handle

×2

Tile, Modified 2 x 3 Pentagonal

Brick, Modified 1 x 2 x 1 2/3 with Studs on Side

×16

Plate, Round Half 4 x 8

Bar Holder with Handle

Brick 2 x 2 Corner

×8

Tile, Modified 1 x 2 Grille with Bottom Groove

×4

Tile, Modified 1 x 2 Grille with Bottom Groove

×5

Tile, Modified 1 x 2 Grille with Bottom Groove

×43

Plate 2 x 2 Corner

×2

Plate 2 x 2 Corner

×2

Plate 2 x 2 Corner

×6

Plate 2 x 2 Corner

×16

Wedge, Plate 2 x 2 Left

×2

Wedge, Plate 2 x 2 Left

×8

Hinge Plate 1 x 4 Swivel (2429 / 2430)

×2

Wedge, Plate 2 x 2 Right

×2

Wedge, Plate 2 x 2 Right

×8

Tile 1 x 4

×11

Bracket 1 x 2 - 1 x 4 with Rounded Corners

×2

Plate 2 x 12

Brick 2 x 6

Brick 1 x 16

×2

Wheel Skateboard / Trolley

×2

Tile, Round 1 x 1 Quarter

×3

Plate, Round 1 x 1 with Bar Handle

×3

Plate, Round 2 x 2 Thin with Wheel Holder

×2

Wedge, Plate 2 x 2 Cut Corner

×14

Tile 2 x 3

×3

Tile 2 x 3

×17

Tile 2 x 3

×4

Tile, Modified Facet 2 x 2

×2

Technic, Brick 1 x 10 with Holes

×2

Technic, Pin with Short Friction Ridges

×36

Slope 45 2 x 1 with Cutout without Stud

×4

Slope 45 2 x 1 with Cutout without Stud

×26

Slope 45 2 x 1 with Cutout without Stud

×4

Brick 2 x 4

×2

Brick 2 x 2

×22

Brick 1 x 2

×2

Brick 1 x 1

×2

Brick 1 x 6

×2

Brick 1 x 6

Brick 1 x 4

×6

Brick, Modified 1 x 2 with Log Profile

×6

Container, Crate 3 x 4 x 1 2/3 with Handholds

Plate 2 x 4

×5

Plate 2 x 4

×6

Plate 2 x 4

×2

Plate 2 x 3

×8

Plate 2 x 2

×4

Plate 2 x 2

×8

Plate 2 x 2

×2

Plate 1 x 2

×2

Plate 1 x 2

×4

Plate 1 x 2

×10

Plate 1 x 2

×2

Plate 1 x 2

×17

Plate 1 x 2

×3

Brick, Modified 1 x 2 with Open O Clip Thick (Vertical Grip)

Plate 1 x 1

×3

Plate 1 x 1

×3

Plate 1 x 1

×15

Plate 1 x 1

×25

Plate 4 x 6

Plate 2 x 8

×2

Plate 2 x 8

×5

Plate 2 x 8

Tile, Modified 2 x 3 with 2 Open O Clips

×2

Tile, Modified 2 x 3 with 2 Open O Clips

×2

Plate 6 x 8

×2

Bar 4L (Lightsaber Blade / Wand)

×4

Slope 45 2 x 2

×3

Slope 45 2 x 2

×3

Slope 45 2 x 1

×2

Slope 45 2 x 1

×2

Panel 1 x 4 x 1

×2

Hinge Cylinder 1 x 2 Locking with 2 Fingers and Axle Hole on Ends with Slots

×2

Brick, Round 1 x 1

×8

Brick, Round 1 x 1

×2

Brick, Round 1 x 1 with Lime Stylized Capital Letter R and Stripes Pattern

×2

Tile 2 x 2

×2

Tile 2 x 2

×4

Tile 1 x 2

×3

Tile 1 x 2

×10

Plate, Modified 1 x 2 with Door Rail

×3

Plate, Modified 1 x 2 with Door Rail

×2

Technic, Pin 3L with Friction Ridges and Stop Bush

×6

Technic, Axle 2L Notched

×4

Technic, Brick 1 x 2 with Axle Hole

×4

Technic, Axle and Pin Connector Perpendicular 3L with Center Pin Hole

×2

Technic, Liftarm Thick 1 x 11

×4

Technic, Pin Connector Plate with Hole on Bottom

×6

Technic, Brick 6 x 8 Open Center

×2

Plant Plate, Round 1 x 1 with 3 Layered Leaves

×4

Slope, Curved 2 x 2 x 2/3 Inverted

×7

Brick, Modified 1 x 1 x 1 2/3 with Studs on Side

×8

Slope 33 3 x 2

×6

Tile, Modified 2 x 2 with Studs on Edge

×2

Plate 1 x 8

×2

Plate, Round 1 x 2 with Open Studs

×5

Plate, Round 1 x 2 with Open Studs

×2

Brick 1 x 3

×14

Brick 1 x 3

×6

Plate 1 x 3

×2

Plate 1 x 3

×4

Minifigure, Head (Plain)

Slope, Inverted 45 2 x 2 with Flat Bottom Pin

×14

Slope, Inverted 45 2 x 1

×10

Plate 1 x 6

Technic, Pin without Friction Ridges

×9

Slope 33 3 x 3 Double Convex Corner

×2

Slope 65 2 x 2 x 2 with Bottom Tube

×4

Slope 75 2 x 2 x 3 - Solid Studs

×6

Slope 75 2 x 2 x 3 Double Convex

×2

Plate 1 x 4

×5

Plate 1 x 4

×3

Technic Bush

×3

Slope, Inverted 33 3 x 2 with Flat Bottom Pin and Connections between Studs

×3

Plate 2 x 6

×8

Plate 2 x 6

×2

Plate 2 x 6

×4

Plate 2 x 6

×5

Plate 2 x 10

Plate, Modified 1 x 2 with Bar Handles - Flat Ends, Low Attachment

Technic, Brick 1 x 12 with Holes

×6

Hinge Brick 1 x 2 Base

×2

Hinge Brick 1 x 2 Base

Hinge Brick 1 x 2 Top Plate

×8

Brick, Round 2 x 2 with Axle Hole

×8

Plate 6 x 6

×2

Plate 6 x 6

Plate, Round 2 x 2 with Axle Hole

Brick, Modified 1 x 1 with Headlight

×14

Plate, Round 1 x 1

×2

Plate, Round 1 x 1

×3

Plate, Round 1 x 1

×2

Plate, Round 1 x 1

×7

Plate, Round 1 x 1

×13

Plate, Round 1 x 1

×19

Plate, Modified 1 x 1 with Open O Clip Thick (Vertical Grip)

×2

Tile 1 x 8

×2

Technic, Pin 1/2 without Friction Ridges

×7

Slope 33 3 x 1

×12

Slope, Inverted 33 3 x 1

×2

Technic, Axle 1L with Pin with Friction Ridges

×3

Container, Box 2 x 2 x 2

×2

Container, Box 2 x 2 x 2 Door with Slot

×2

Wedge, Plate 3 x 2 Right

Technic, Liftarm Thick 1 x 2

×2

Elephant Tail / Trunk with Bar End - Short Curved Tip

×6

Dish 3 x 3 Inverted (Radar)

×4

Hinge Plate 1 x 2 Locking with 1 Finger on End without Bottom Groove

×2

Hinge Plate 1 x 2 Locking with 2 Fingers on End

×2

Hinge Plate 1 x 4 Locking Dual 1 Finger on Side

Hinge Plate 3 x 4 Locking Dual 2 Fingers

Bracket 1 x 2 - 2 x 2

×2

Plate 1 x 10

×2

Cone 1 x 1 with Top Groove

×2

Cone 1 x 1 with Top Groove

×2

Antenna Small Base with Black Lever (4592 / 4593)

×4

Brick, Modified 1 x 2 x 2/3 with Studs on Sides and Extended Stud Receptacle

Bracket 3 x 2 - 2 x 2 Inverted (Space Seat)

×2

Plate, Modified 1 x 2 with Bar Arm Up (Horizontal Arm 5mm)

Pneumatic T Piece Second Version (T Bar with Ball in Center)

×2

Dish 2 x 2 Inverted (Radar)

×4

Dish 2 x 2 Inverted (Radar)

×2

Technic Rotation Joint Ball Loop with 2 Perpendicular Pins with Friction

×4

Slope, Curved 2 x 2 x 2/3 with 2 Studs and Curved Sides

×2

Hinge 1 x 3 with Two Pins, Locking 1 Finger - Round Pin Holes

×4

Technic, Brick Modified 2 x 2 with Pin Hole and Rotation Joint Socket

×4

Technic, Brick Modified 2 x 2 with Pin Hole and Rotation Joint Ball Half Vertical

×4

Plate, Modified 1 x 2 with Bar Handle on Side - Closed Ends

×2

Plate, Modified 1 x 2 with Bar Handle on Side - Closed Ends

Slope 45 3 x 4 Double / 33

×2

Bar 1L with Clip Mechanical Claw - Cut Edges and Hole on Side

×2

Slope, Curved 1 x 1 x 2/3 Double

×2

Slope, Curved 3 x 1

×2

Wedge 4 x 6 x 2/3 Triple Curved

Barb / Claw / Horn / Tooth - Small

×3

Slope 30 1 x 1 x 2/3

×2

Slope 30 1 x 1 x 2/3

×2

Slope 30 1 x 1 x 2/3

×9

Wedge, Plate 6 x 3 Right

Hinge Plate 1 x 2 Locking with 2 Fingers on Side

×4

Brick, Modified 1 x 1 with Open O Clip (Vertical Grip) - Hollow Stud

×2

Plate, Modified 1 x 2 with Bar Handle on End

×4

Arch 1 x 6 x 3 1/3 Curved Top

Minifigure, Utensil Hose Nozzle Elaborate

×2

Slope, Curved 2 x 1 x 1 1/3 with Recessed Stud

×2

Technic, Pin 1/2 with 2L Bar Extension (Flick Missile)

Hinge Brick 2 x 2 Top Plate

×2

Hinge Brick 2 x 2 Top Plate

Slope 18 2 x 1 x 2/3 with Grille

×6

Tile, Modified 4 x 6 with Studs on Edges

×7

Technic, Pin Connector Round 2L with Slot (Pin Joiner Round)

×2

Technic, Pin Connector Round 2L with Slot (Pin Joiner Round)

×6

Plate, Modified 1 x 2 with Clip on End (Horizontal Grip)

×4

Minifigure, Weapon Lightsaber Hilt Straight

×2

Technic, Brick 1 x 1 with Hole

×2

Tile 1 x 6

×8

Tile 1 x 6

Sticker Sheet for Set 70835 - (48114/6251047)

Bracket 5 x 2 x 2 1/3 with 2 Holes and Bottom Stud Holder

Plate, Round 1 x 1 with Open Stud

×5

Slope 30 1 x 2 x 2/3

×2

Slope 30 1 x 2 x 2/3

×2

Slope 30 1 x 2 x 2/3

×2

Slope 30 1 x 2 x 2/3

×16

Tile 2 x 4

×2

Tile 2 x 4

Brick, Modified 1 x 1 with Stud on Side

×4

Brick, Modified 1 x 1 with Stud on Side

×4

Panel 1 x 2 x 3 with Side Supports - Hollow Studs

×2

Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper)

×2

Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper)

×3

Plate, Modified 1 x 2 with Clip with Center Cut on Top

×5

Plate, Modified 1 x 4 with 2 Studs without Groove

Slope 45 2 x 1 with 2/3 Cutout

×4

Slope 45 2 x 1 with 2/3 Cutout

×16

Slope 45 2 x 1 with 2/3 Cutout

×2

Arch 1 x 6 Raised Arch

×2

Slope, Curved 4 x 1 x 2/3 Double

Slope, Curved 4 x 2

Brick and Axle Separator

Tile, Round 1 x 1

×7

Tile, Round 1 x 1 with Black Eye with Pupil Pattern

×3

Tile, Round 1 x 1 with Black Eye Partially Closed with Off-Center Pupil Pattern

×3

Tile, Round 1 x 1 with Soda Pop Can Top Pattern

×3

Plate, Modified 2 x 2 x 2/3 with 2 Studs on Side

Bracket 1 x 2 - 2 x 2 Inverted

×5

Minifigure, Utensil Ingot 1 x 2

×4

Bracket 1 x 2 - 1 x 2 Inverted

×2

Bracket 1 x 2 - 1 x 2

×2

Bracket 1 x 2 - 1 x 2

×3

Dinosaur Raptor / Velociraptor with Blue Markings and Blue Eye Patch

Dinosaur Raptor / Velociraptor with Blue Markings and Lime Eye Patch

Rex's Rexplorer!

About Rex's Rexplorer!

Part-out value

Minifigures in Rex's Rexplorer! (2)

Parts (286)

Common questions about Rex's Rexplorer!

How much is LEGO Rex's Rexplorer! (70835-1) worth?

What minifigures come in LEGO set 70835-1?

Is it worth parting out LEGO Rex's Rexplorer!?

Is LEGO Rex's Rexplorer! (70835-1) retired?

How do I check if my Rex's Rexplorer! set is complete?

More The LEGO Movie 2 sets

Explore more

Company

Legal