How much is LEGO The Mine (4204-1) worth?

The Mine sells for an average of $91.84 used and $191.24 new/sealed on BrickLink based on 6 months of completed sales. As a retired set, prices tend to hold steady or appreciate over time, especially for complete sets with original packaging. Actual prices vary with completeness. Missing minifigures or key parts will lower the value.

What minifigures come in LEGO set 4204-1?

This set includes 4 minifigures: Flannel Shirt with Pocket and Belt, Sand Blue Legs, Mining Helmet, Safety Goggles ($1.62), Miner - Overalls Blue over V-Neck Shirt, Blue Legs, Mining Helmet, Crooked Smile and Scar ($1.47), Miner - Shirt with Harness and Wrench, Dark Tan Legs, Mining Helmet, Sweat Drops ($1.47), Miner - Shirt with Tie and Suspenders, Mining Helmet, Beard ($1.98). The minifigures have a combined BrickLink value of $6.54. Each figure is linked above with individual pricing if you're looking to buy or sell specific characters.

Is it worth parting out LEGO The Mine?

The minifigures make up about 7% of the set value ($6.54 out of $91.84). Most of the value is in the complete set package, so selling it whole is likely the better move unless you have buyers lined up for specific figures.

Is LEGO The Mine (4204-1) retired?

Yes, The Mine was released in 2012 and has been retired from retail for several years. Retired LEGO sets are only available on the secondary market through BrickLink, eBay, or other resale platforms.

How do I check if my The Mine set is complete?

Use the parts list on this page to check every piece and all 4 minifigures. For the minifigures specifically, you can use the brick'em scanner to identify each figure from a photo and confirm it matches what should be in this set. Missing pieces can be individually sourced on BrickLink.

The Mine

4204-1·Town / City·2012·4 minifigs·303 parts

Used Avg

$91.84

New Avg

$191.24

Add to your inventory Scan the minifigs

About The Mine

The Mine (4204-1) is a LEGO Town / City set released in 2012, currently averaging $91.84 used on BrickLink. It comes with 4 minifigures worth a combined $6.54. The set has retired from retail, so secondary market is the only option. The full parts inventory runs 303 pieces.

Part-out value

Parts (303)

Tile, Modified 1 x 2 Grille with Bottom Groove

×2

Tile, Modified 1 x 2 Grille with Bottom Groove

×6

Tile, Modified 1 x 2 Grille with Bottom Groove

×6

Tile, Modified 1 x 2 Grille with Bottom Groove

×2

Plate 2 x 2 Corner

×4

Hinge Plate 1 x 4 Swivel (2429 / 2430)

×2

Tile 1 x 4

×3

Tile 1 x 4

×4

Tile, Modified 1 x 2 with Bar Handle

Bracket 1 x 2 - 1 x 4

Plate 2 x 12

Brick 1 x 1 x 5 - Solid Stud

Brick 1 x 2 x 5

×2

Brick 2 x 6

×2

Brick, Modified 1 x 2 with Pin

×2

Tile, Modified 1 x 1 with Clip

×5

String Reel 2 x 2 Holder

String Reel 2 x 2 Drum

Brick, Modified 1 x 4 with Channel

×2

Technic, Pin with Short Friction Ridges

×6

Plate, Modified 2 x 2 with Pin Holes

Brick, Modified 1 x 2 with Grille / Fluted Profile

×2

Plate, Modified 1 x 4 with Wheels Holder

Brick 2 x 4

×2

Brick 2 x 4

×2

Brick 2 x 3

Brick 2 x 2

×2

Brick 2 x 2

×2

Brick 2 x 2

×5

Brick 2 x 2

×2

Brick 1 x 2

×8

Brick 1 x 2

×4

Brick 1 x 2

×7

Brick 1 x 1

×2

Brick 1 x 1

×6

Brick 1 x 8

×2

Brick 1 x 8

Brick 1 x 6

×7

Brick 1 x 4

×3

Brick 1 x 4

×2

Brick 1 x 4

×2

Brick 1 x 4

×2

Brick 1 x 4

×4

Container, Crate 3 x 4 x 1 2/3 with Handholds

Minifigure, Utensil Binoculars Town

Plate 2 x 4

×9

Plate 2 x 4

×8

Plate 2 x 4

×3

Plate 2 x 3

×2

Plate 2 x 3

×2

Plate 2 x 3

Plate 2 x 2

×4

Minifigure, Utensil Tool Motor Hammer / Jackhammer

Plate 1 x 2

×7

Plate 1 x 2

×4

Plate 1 x 2

×6

Plate 1 x 2

×2

Plate 1 x 2

×3

Plate 1 x 2

×3

Plate 1 x 2

×4

Plate 1 x 1

×2

Plate 1 x 1

×3

Plate 4 x 12

Rock 4 x 4 Octagonal Boulder, Top

×2

Rock 4 x 4 Octagonal Boulder, Bottom

×2

Plate 4 x 10

×2

Plate 4 x 4

Plate 4 x 6

×3

Plate 6 x 10

×2

Plate 2 x 8

Plate 6 x 8

Bar 4L (Lightsaber Blade / Wand)

×2

Bar 4L (Lightsaber Blade / Wand)

Slope 45 2 x 1

×3

Slope 45 2 x 1

×5

Panel 1 x 4 x 1

×6

Brick, Round 1 x 1

×12

Brick, Round 1 x 1

×4

Brick, Round 1 x 1

×13

Brick, Round 1 x 1

×12

Brick 1 x 4 without Bottom Tubes

Vehicle, Steering Wheel Small, 2 Studs Diameter

Tile 2 x 2

×10

Tile 1 x 2

×4

Tile 1 x 2

×2

Tile 1 x 2

Tile 1 x 1 with White and Red Gauge, Black Thick Needle and Screw Heads Pattern

×2

Technic, Pin 3/4

×3

Plate, Modified 1 x 2 with Door Rail

×2

Technic, Axle 2L Notched

Technic, Liftarm, Modified L-Shape Quarter Ellipse Thin 3 x 3

Technic, Gear 12 Tooth Double Bevel

Train, Track Rail Straight 16L (no slots, no tapered ends)

×8

Technic, Liftarm Thick 1 x 11

Arch 1 x 8 x 2

×2

Plate 1 x 8

×2

Wheel Center Small with Stub Axles (Pulley Wheel)

Crane Bucket with Spring and Yellow Handle (3489 / bb0217 / 3490)

Brick 1 x 3

×6

Brick 1 x 3

Plate 1 x 3

×4

Plate 1 x 3

×2

Plate 1 x 3

×3

Arch 1 x 4

Slope, Inverted 45 2 x 2 with Flat Bottom Pin

×2

Slope, Inverted 45 2 x 1

×8

Slope, Inverted 45 2 x 1

×4

Plate 1 x 6

×5

Technic, Brick 1 x 2 with Hole

×4

Technic, Brick 1 x 2 with Hole

×3

Technic, Brick 1 x 4 with Holes

×4

Technic, Axle 4L

×2

Plate 1 x 4

×3

Plate 1 x 4

×6

Plate 1 x 4

×7

Plate 1 x 4

×2

Technic Bush

×5

Plate, Modified 2 x 2 with Tow Ball

×2

Technic, Axle 10L

Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)

Plate 2 x 6

×2

Plate 2 x 6

Door 1 x 3 x 1 Right

Door 1 x 3 x 1 Left

Vehicle, Steering Stand 1 x 2 with Black Steering Wheel

×2

Vehicle, Steering Stand 1 x 2 with Black Steering Wheel

Minifigure, Utensil Push Broom

Minifigure, Utensil Shovel / Spade - Handle with Round End

Minifigure, Utensil Pickaxe

Minifigure, Utensil Cup

×2

Hinge Brick 1 x 2 Base

Antenna 4H - Round Top

Plate 6 x 6

×2

Minifigure, Utensil Radio (Walkie-Talkie) with Extended Handle

Brick, Modified 1 x 1 with Headlight

Plate, Round 1 x 1

×3

Plate, Round 1 x 1

×3

Plate, Round 1 x 1

×2

Plate, Round 1 x 1

×2

Plate, Round 1 x 1

×2

Minifigure, Utensil Seat / Chair 2 x 2

×2

Minifigure, Utensil Seat / Chair 2 x 2

Plate, Modified 1 x 1 with Light Attachment - Thick Ring

×2

Tile, Round 2 x 2

×2

Tile 1 x 8

×6

Tile 1 x 8

×5

Tile 1 x 8

×2

Ladder 1 1/2 x 2 x 2

×3

Technic Wedge Belt Wheel (Pulley)

Sticker Sheet for Set 4204 - (10010493/6004804)

Slope 33 3 x 1

Minifigure, Utensil Loudhailer / Megaphone / SW Blaster

Hinge Plate 1 x 2 Locking with 2 Fingers on End

×2

Hinge Plate 1 x 2 Locking with 1 Finger on Side with Bottom Groove

×8

Bracket 1 x 2 - 2 x 2

×3

Plate 1 x 10

Plate, Modified 2 x 2 with Wheel Holder

×6

Plate, Modified 1 x 8 with Door Rail

×2

Technic, Axle 3L

×2

Container, Cupboard 2 x 3 x 2 - Hollow Studs

Container, Cupboard 2 x 3 x 2 Door

Antenna Small Base with Black Lever (4592 / 4593)

×5

Plate, Modified 2 x 2 with Wheels Holder

×4

Plate, Modified 1 x 2 with Bar Arm Up (Horizontal Arm 5mm)

Pneumatic T Piece Second Version (T Bar with Ball in Center)

×3

Dish 2 x 2 Inverted (Radar)

×5

Slope, Curved 2 x 2 x 2/3 with 2 Studs and Curved Sides

×2

Plate, Modified 2 x 2 with Wheels Holder Wide - Technic Pins

×2

Plate, Modified 4 x 4 with 2 Clips (Horizontal Grip)

Plate, Modified 1 x 2 with Bar Handle on Side - Closed Ends

Panel 1 x 2 x 1

Panel 1 x 2 x 1 with Rounded Corners

×4

Windscreen 3 x 4 x 4 Inverted

Train Wheel Small, Hole Notched for Wheels Holder Pin

×8

Vehicle, Mudguard 4 x 2 1/2 x 1 2/3 with Arch Round

×2

Slope, Curved 3 x 1

×2

Rock 1 x 1 Crystal 5 Point

×6

Slope 30 1 x 1 x 2/3

×3

Slope 30 1 x 1 x 2/3

×3

Slope 30 1 x 1 x 2/3

×5

Slope 30 1 x 1 x 2/3

×3

Slope 30 1 x 1 x 2/3

×6

Wheel 18mm D. x 14mm with Pin Hole, Fake Bolts and Shallow Spokes

×4

Crane Arm Outside, Wide with Pin Hole at Mid-Point

Bar with Light Cover (Bulb) / Bionicle Barraki Eye

×4

Panel 1 x 6 x 5

×3

Tire 14mm D. x 4mm Smooth Small Single with Number Embossed on Side

×2

Window 1 x 2 x 2 Plane, Single Hole Top and Bottom for Glass

×2

Wheel 11mm D. x 12mm, Hole Notched for Wheels Holder Pin

×8

Plate, Modified 1 x 2 with 2 U Clips (Horizontal Grip)

×2

Hinge Plate 1 x 2 Locking with 2 Fingers on Side

×2

Plate, Round 4 x 4 with Hole

Brick, Modified 1 x 1 with Open O Clip (Vertical Grip) - Hollow Stud

×2

Slope 18 4 x 1

Panel 1 x 4 x 3 with Side Supports - Hollow Studs

Brick, Modified 1 x 1 x 3 with 2 Clips (Vertical Grip) - Hollow Stud

×2

Brick, Modified 1 x 1 x 3 with 2 Clips (Vertical Grip) - Hollow Stud

Window 1 x 4 x 3 - No Shutter Tabs

Door, Frame 1 x 4 x 6 with 2 Holes on Top and Bottom

Glass for Window 1 x 2 x 2 Flat Front

×2

Door 1 x 4 x 6 with 4 Panes and Stud Handle

Fence 1 x 8 x 2 2/3

Rock Panel 4 x 10 x 6 Rectangular (BURP)

×2

Rock Panel 3 x 8 x 7 Triangular (LURP)

×2

Plate, Modified 1 x 4 with Angled Tubes

×3

Arch 1 x 12 x 3

×2

Brick 1 x 10

×2

Plate, Modified 1 x 1 with Open O Clip (Horizontal Grip)

Hinge Brick 2 x 2 Top Plate

Slope 18 2 x 1 x 2/3 with Grille

×2

Turntable 4 x 4 Square Base, Locking

Plate, Modified 2 x 2 with Wheels Holder Wide and Hole

Slope, Curved 4 x 1

×2

Container, Box 2 x 2 x 2 - Top Opening

Tile, Modified 4 x 4 with Studs on Edge

Bar 1 x 4 x 3 Grille with End Protrusions

Plate, Modified 2 x 2 with Tow Ball Socket, Short, Flattened with Holes and Axle Hole in Center

Tile 1 x 3

×2

Plate, Modified 1 x 2 with Clip on End (Horizontal Grip)

×2

Technic, Link 1 x 9 Bent (6 - 4)

×2

Windscreen 1 x 6 x 3

Wheel Hard Plastic with Small Cleats and Flanges

Minifigure, Utensil Dynamite Sticks Bundle

×3

Plate, Modified 4 x 4 with 2 x 2 Open Center

Technic, Axle Connector 2L (Smooth with x Hole + Orientation)

×2

Technic, Pin 3L with Friction Ridges

×2

Tile 1 x 6

×2

Slope 30 1 x 2 x 2/3

×2

Slope 30 1 x 2 x 2/3

×3

Tile 2 x 4

×2

Tile 2 x 4

×3

Tile 2 x 4

×3

Technic, Pin 3L with Friction Ridges and Center Pin Hole

Technic, Axle 4L with Stop

Brick, Modified 1 x 1 with Stud on Side

×2

Brick, Modified 1 x 1 with Stud on Side

×4

Panel 1 x 2 x 3 with Side Supports - Hollow Studs

×2

Panel 1 x 2 x 3 with Side Supports - Hollow Studs

Panel 1 x 2 x 2 with Side Supports - Hollow Studs

×2

Panel 1 x 2 x 2 with Side Supports - Hollow Studs

×2

Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper)

Plate, Modified 2 x 6 x 2/3 with 4 Studs on Side

Tire 21mm D. x 12mm - Offset Tread Small Wide, Band Around Center of Tread

×8

Road Sign 2 x 2 Triangle with Clip

Plate 16 x 16

Plate 2 x 14

Hinge Train Gate 2 x 4 Locking Dual 2 Fingers without Rear Reinforcements

×2

Plate, Modified 4 x 6 with Trap Door Hinge (Long Pins)

Plate, Modified 1 x 2 with Clip with Center Cut on Top

×2

Tire 30.4 x 14 Offset Tread - Band Around Center of Tread

×4

Plate 8 x 16

×2

Conveyor Belt

Brick, Round 2 x 2 with Axle Hole and Grille / Fluted Profile

×2

Bracket 1 x 2 - 2 x 4

×2

Slope, Curved 4 x 2

Brick and Axle Separator

Tile, Round 1 x 1

×6

Tile, Round 1 x 1

×10

Tile, Round 1 x 1

×6

Plate, Modified 1 x 4 with Tow Ball Socket, Flattened with Holes

×2

Panel 1 x 6 x 3 with Studs on Sides

×3

Wedge 6 x 4 x 2/3 Quad Curved

Hinge Plate 2 x 4 with Pin Hole and 3 Holes - Bottom

×2

Hinge Plate 2 x 4 with Pin Hole and 3 Holes - Top

×2

Bracket 3 x 4 - 3 x 4

×8

Minifigure, Utensil Wheelbarrow Frame

Plate, Modified 2 x 2 x 2/3 with 2 Studs on Side

×2

Bracket 1 x 2 - 1 x 2

×2

String, Cord Thin 50cm

The Mine

About The Mine

Part-out value

Seller notes

Minifigures in The Mine (4)

Parts (303)

Common questions about The Mine

How much is LEGO The Mine (4204-1) worth?

What minifigures come in LEGO set 4204-1?

Is it worth parting out LEGO The Mine?

Is LEGO The Mine (4204-1) retired?

How do I check if my The Mine set is complete?

More Town / City sets

Explore more

Company

Legal