How much is LEGO Arctic Base Camp (60036-1) worth?

Arctic Base Camp sells for an average of $75.23 used and $154.32 new/sealed on BrickLink based on 6 months of completed sales. As a retired set, prices tend to hold steady or appreciate over time, especially for complete sets with original packaging. Actual prices vary with completeness. Missing minifigures or key parts will lower the value.

What minifigures come in LEGO set 60036-1?

This set includes 7 minifigures: Arctic Explorer, Female ($1.64), Arctic Explorer, Male with Orange Goggles ($1.41), Arctic Explorer, Male with Green Goggles ($1.46), Arctic Scientist - Dark Brown Hair, Beard ($2.50), plus 3 more. The minifigures have a combined BrickLink value of $12.54. Each figure is linked above with individual pricing if you're looking to buy or sell specific characters.

Is it worth parting out LEGO Arctic Base Camp?

The minifigures make up about 17% of the set value ($12.54 out of $75.23). Most of the value is in the complete set package, so selling it whole is likely the better move unless you have buyers lined up for specific figures.

Is LEGO Arctic Base Camp (60036-1) retired?

Yes, Arctic Base Camp was released in 2014 and has been retired from retail for several years. Retired LEGO sets are only available on the secondary market through BrickLink, eBay, or other resale platforms.

How do I check if my Arctic Base Camp set is complete?

Use the parts list on this page to check every piece and all 7 minifigures. For the minifigures specifically, you can use the brick'em scanner to identify each figure from a photo and confirm it matches what should be in this set. Missing pieces can be individually sourced on BrickLink.

Arctic Base Camp

60036-1·Town / City·2014·7 minifigs·252 parts

Used Avg

$75.23

New Avg

$154.32

Add to your inventory Scan the minifigs

About Arctic Base Camp

Arctic Base Camp (60036-1) is a LEGO Town / City set released in 2014, currently averaging $75.23 used on BrickLink. It comes with 7 minifigures worth a combined $12.54. The set has retired from retail, so secondary market is the only option. The full parts inventory runs 252 pieces.

Parts (252)

Minifigure, Utensil Magnifying Glass Thick Frame and Solid Handle with Trans-Clear Lens

Minifigure Footgear Snowshoe - Short Front End

×2

Tile, Modified 2 x 2 Inverted

×2

Windscreen 4 x 4 x 4 2/3 with Bar Handle

Slope, Curved 8 x 2 x 2 Double

×2

Slope, Curved 2 x 1 x 2/3

×5

Slope, Curved 2 x 1 x 2/3

×12

Slope, Curved 4 x 1 Inverted

×2

Arch 1 x 12 x 3 Raised Arch with 1 Cross Support

×2

Tile, Round 2 x 2 with Bottom Stud Holder

×3

Slope, Curved 2 x 2 x 2/3 with Dark Blue and White Arctic Explorer Logo Pattern

Road Sign 2 x 2 Square with Open O Clip

×2

Helicopter Landing Ski 1 x 6 with Pin Hole {15625}

×2

Dog, Husky with Marbled Dark Bluish Gray Ears and Back and Printed Black Eyes and Nose, White Face and Ears Pattern

×4

Minifigure, Utensil Ice Axe - 3-Rib Handle

×2

Flag 2 x 2 Square

Tile, Modified 1 x 2 Grille with Bottom Groove

×4

Propeller 3 Blade Small

Tile 1 x 4

×16

Tile, Modified 1 x 2 with Bar Handle

×2

Tile, Modified 1 x 2 with Bar Handle

×4

Tile, Modified 1 x 2 with Bar Handle

×3

Minifigure, Visor Standard

Tile, Modified 2 x 2 with Pin

Brick 1 x 16

Propeller 4 Blade 5 Diameter with Rounded Ends and Open Hub

Plate, Modified 1 x 2 with Bar Handle on Side - Free Ends

×2

Tile, Modified 1 x 1 with Clip

×2

Antenna Whip 8H

×4

String Reel 2 x 2 Holder

String Reel 2 x 2 Drum

Minifigure, Utensil Fishing Rod / Pole, 12L

Plate, Round 2 x 2 with Rounded Bottom (Boat Stud)

Technic, Pin with Short Friction Ridges

×13

Brick, Modified 1 x 2 with Grille / Fluted Profile

Brick 2 x 4

×2

Brick 2 x 2

×11

Brick 2 x 2

×2

Minifigure, Utensil Handlebars

Brick 1 x 2

×10

Brick 1 x 2

×4

Brick 1 x 1

×4

Brick 1 x 1

Brick 1 x 8

×2

Brick 1 x 6

×3

Brick 1 x 4

×5

Brick 1 x 4

×2

Brick 1 x 4

×2

Container, Crate 3 x 4 x 1 2/3 with Handholds

Minifigure, Utensil Binoculars Town

Minifigure, Utensil Tool Circular Blade Saw

Plate 2 x 4

×7

Plate 2 x 4

×2

Plate 2 x 4

×3

Plate 2 x 3

Plate 2 x 2

×11

Plate 2 x 2

×4

Plate 1 x 2

×11

Plate 1 x 2

×9

Plate 1 x 2

×5

Plate 1 x 2

×2

Plate 1 x 2

×4

Plate 1 x 2

×8

Brick, Modified 1 x 2 with Bar Handle on Side

Plate 1 x 1

×4

Plate 1 x 1

×3

Plate 1 x 1

×2

Plate 6 x 12

×2

Plate 4 x 12

Rock 4 x 4 Octagonal Boulder, Top

×2

Rock 4 x 4 Octagonal Boulder, Bottom

×2

Plate 4 x 10

Plate 4 x 4

×2

Plate 4 x 6

×2

Plate 6 x 10

×2

Plate 2 x 8

Tile, Modified 2 x 3 with 2 Open O Clips

×2

Plate 6 x 8

×2

Hinge Brick 1 x 4 Locking with 1 Finger Vertical End and 2 Fingers Vertical End

Hinge Brick 1 x 6 Locking with 1 Finger Vertical End and 2 Fingers Vertical End

Hinge Brick 2 x 2 Locking with 1 Finger Vertical and Axle Hole

Hook with Tow Ball

Slope 45 2 x 1

×4

Hinge Plate 1 x 8 with Angled Side Extensions

×2

Panel 1 x 4 x 1

×2

Brick, Modified 1 x 4 with Studs on Side

Hinge Cylinder 1 x 2 Locking with 2 Fingers and Axle Hole on Ends with Slots

×2

Plate, Modified 2 x 8 with Door Rail

×2

Brick, Round 1 x 1

Tile 2 x 2

×4

Tile 1 x 2

Tile 1 x 2 with Black Tape Reels Pattern

Plate, Modified 1 x 2 with Door Rail

×2

Technic, Brick 1 x 2 with Axle Hole

×2

Technic, Axle 5L

×2

Brick 1 x 2 x 2 with Inside Stud Holder

×8

Technic, Pin Connector Plate 1 x 2 x 1 2/3 with 2 Holes on Top

×2

Plate 6 x 14

Plate 1 x 8

×6

Plate 1 x 8

×2

Plate 1 x 8

×7

Brick 1 x 3

×2

Plate 1 x 3

×11

Plate 1 x 6

×5

Technic, Brick 1 x 2 with Hole

×8

Technic, Brick 1 x 2 with Hole

×2

Technic, Brick 1 x 8 with Holes

Technic, Axle 4L

×2

Plate 1 x 4

×3

Technic Bush

×2

Slope, Inverted 33 3 x 2 with Flat Bottom Pin and Connections between Studs

Technic, Axle 1L with Pin without Friction Ridges with Round Hole

×3

Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper)

×4

Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper)

×2

Plate 2 x 6

×6

Door 1 x 3 x 1 Right

Door 1 x 3 x 1 Left

Vehicle, Steering Stand 1 x 2 with Black Steering Wheel

Plate 2 x 10

Plate, Modified 1 x 2 with Bar Handles - Flat Ends, Low Attachment

Minifigure, Utensil Cup

×2

Support 2 x 2 x 2 Stand with Complete Hole

×18

Brick, Round 2 x 2 with Axle Hole

×2

Antenna 4H - Flat Top

Minifigure, Utensil Radio (Walkie-Talkie) with Extended Handle

×2

Plate, Round 2 x 2 with Axle Hole

Plate, Round 1 x 1

×4

Plate, Round 1 x 1

×12

Plate, Round 1 x 1

×9

Minifigure, Utensil Seat / Chair 2 x 2

×2

Plate, Modified 1 x 1 with Light Attachment - Thick Ring

×2

Bar 1 x 4 x 2 with Open Studs

Plate, Modified 1 x 1 with Open O Clip Thick (Vertical Grip)

×8

Plate, Modified 1 x 1 with Open O Clip Thick (Vertical Grip)

×2

Technic, Liftarm Thick 1 x 13

×2

Windscreen 2 x 6 x 2

Door 1 x 4 x 5 Train Right, Thin Support at Bottom

Glass for Train Door with Lip on Top and Bottom

Technic Bush 1/2 Smooth

×3

Technic, Pin 1/2 without Friction Ridges

×3

Slope 33 3 x 1

×2

Slope, Inverted 33 3 x 1

×2

Technic, Axle 1L with Pin with Friction Ridges

×4

Minifigure, Utensil Camera with Side Sight (Space Gun)

Dish 6 x 6 Inverted (Radar) - Solid Studs

Tail Shuttle, Small

Plate, Modified 2 x 2 with Wheel Holder

Plate, Modified 1 x 8 with Door Rail

Technic, Axle 3L

×2

Cone 1 x 1 with Top Groove

×2

Cone 1 x 1 with Top Groove

×2

Antenna Small Base with Black Lever (4592 / 4593)

×4

Pneumatic T Piece Second Version (T Bar with Ball in Center)

×2

Brick, Modified 1 x 1 with Studs on 4 Sides

Dish 2 x 2 Inverted (Radar)

×2

Bar 12L with Open Stud, Tow Ball, and Slit (Boat Mast)

Plate, Modified 2 x 2 with Wheels Holder Wide - Technic Pins

Wedge 4 x 3 Open with Cutout and 4 Studs

Hinge 1 x 3 with Two Pins, Locking 1 Finger - Round Pin Holes

Plate, Modified 1 x 2 with Bar Handle on Side - Closed Ends

×5

Panel 1 x 2 x 1 with Rounded Corners

×2

Slope, Inverted 45 4 x 2 Double with 2 x 2 Cutout

×2

Plate, Modified 1 x 2 with Racers Car Grille

×4

Slope, Curved 3 x 1

×2

Wedge, Plate 2 x 4

Rock 1 x 1 Crystal 5 Point

×3

Wedge 4 x 6 x 2/3 Triple Curved

Slope 30 1 x 1 x 2/3

×3

Slope 30 1 x 1 x 2/3

×3

Slope 30 1 x 1 x 2/3

×3

Tire 37 x 22 ZR

Wheel 18mm D. x 14mm with Pin Hole, Fake Bolts and Shallow Spokes

Wheel 30.4mm D. x 20mm with No Pin Holes and Reinforced Rim

Technic, Link Tread Wide with 2 Pin Holes

×46

Technic Tread Sprocket Wheel Small

×6

Sticker Sheet for Set 60036 - Transparent Background Version - (15111/6045703)

Hinge Plate 1 x 2 Locking with 2 Fingers on Side

×2

Plate, Modified 1 x 2 with Bar Handle on End

×4

Panel 1 x 4 x 3 with Side Supports - Hollow Studs

Glass for Window 1 x 2 x 2 Flat Front

×18

Slope, Curved 2 x 4 x 1 1/3 with 4 Recessed Studs

×6

Minifigure, Utensil Hose Nozzle Elaborate

×3

Slope, Curved 2 x 1 x 1 1/3 with Recessed Stud

Brick 1 x 12

Minifigure, Utensil Tool Chainsaw Blade

Plate, Modified 1 x 1 with Open O Clip (Horizontal Grip)

×4

Plate, Modified 1 x 1 with Open O Clip (Horizontal Grip)

×4

Window 1 x 4 x 2 Plane, Single Top Hole and Single Bottom Hole for Glass

×9

Turntable 4 x 4 Square Base, Locking

Slope, Curved 4 x 4 x 2 with 4 Studs and Pin Holes

×6

Brick, Modified 2 x 2 with Pin and Axle Hole

×4

Brick, Modified 2 x 2 with Pin and Axle Hole

×2

Technic, Pin Connector Round 2L with Slot (Pin Joiner Round)

×2

Technic, Pin Connector Round 2L with Slot (Pin Joiner Round)

×3

Plate, Modified 2 x 2 with Tow Ball Socket, Short, Flattened with Holes and Axle Hole in Center

Tile 1 x 3

Plate, Modified 1 x 2 with Clip on End (Horizontal Grip)

×5

Plate, Modified 1 x 2 with Clip on End (Horizontal Grip)

×2

Support 1 x 6 x 5 Girder Rectangular

×2

Minifigure, Weapon Lightsaber Hilt Straight

×2

Fish

×2

Cone Spiral Jagged - Step Drill

Technic, Axle Connector 2L (Smooth with x Hole + Orientation)

×2

Technic, Axle 3L with Stud

Tile 1 x 6

×3

Tile 1 x 6

×3

Tile 1 x 6

×2

Net, String 10 x 10 Square

Tile, Round 2 x 2 with Lifting Ring Thick and Bottom Stud Holder

Slope 30 1 x 2 x 2/3

×2

Slope 30 1 x 2 x 2/3

×3

Slope 30 1 x 2 x 2/3

Minifigure, Utensil Space Gun / Torch without Grooves

Tile 2 x 4

×2

Tile 2 x 4

×2

Brick, Round 4 x 4 with Hole

Technic, Axle 4L with Stop

×4

Brick, Modified 1 x 1 with Stud on Side

×4

Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper)

Plate, Modified 2 x 6 x 2/3 with 4 Studs on Side

Cylinder 1 x 5 1/2 with Bar Handle (Friction Cylinder)

×2

Plate 16 x 16

Panel 2 x 2 x 1 Corner

×4

Plate, Modified 1 x 2 with Clip with Center Cut on Top

×6

Hinge Plate 2 x 2 Locking with 1 Finger on Top

×2

Conveyor Belt

Brick, Round 2 x 2 with Axle Hole and Grille / Fluted Profile

×3

Brick and Axle Separator

Tile, Round 1 x 1

×3

Tile, Round 1 x 1

×3

Plate, Round 2 x 2 with Pin Hole and 4 Bar Arms Up

Bear with 2 Studs on Back with Black Eyes and Nose Pattern (Polar Bear)

Minifigure, Utensil Handlebars with Angular Handles

×2

Bracket 1 x 2 - 1 x 2 Inverted

×2

Bracket 1 x 2 - 1 x 2

String, Cord Thin 50cm

×2

Arctic Base Camp

About Arctic Base Camp

Part-out value

Seller notes

Minifigures in Arctic Base Camp (7)

Parts (252)

Common questions about Arctic Base Camp

How much is LEGO Arctic Base Camp (60036-1) worth?

What minifigures come in LEGO set 60036-1?

Is it worth parting out LEGO Arctic Base Camp?

Is LEGO Arctic Base Camp (60036-1) retired?

How do I check if my Arctic Base Camp set is complete?

More Town / City sets

Explore more

Company

Legal