How much is LEGO Fire Engine (60112-1) worth?

Fire Engine sells for an average of $83.88 used and $108.00 new/sealed on BrickLink based on 6 months of completed sales. As a retired set, prices tend to hold steady or appreciate over time, especially for complete sets with original packaging. Actual prices vary with completeness. Missing minifigures or key parts will lower the value.

What minifigures come in LEGO set 60112-1?

This set includes 3 minifigures: Fire - Reflective Stripes with Utility Belt and Flashlight, White Fire Helmet, Brown Moustache and Goatee ($1.16), Fire - Reflective Stripes with Utility Belt, White Fire Helmet, Breathing Neck Gear with Air Tanks, Trans-Brown Visor, Sweat Drops ($1.56), Fire - Reflective Stripes with Utility Belt, White Fire Helmet, Breathing Neck Gear with Air Tanks, Trans-Brown Visor, Nougat Lips Smile ($1.60). The minifigures have a combined BrickLink value of $4.32. Each figure is linked above with individual pricing if you're looking to buy or sell specific characters.

Is it worth parting out LEGO Fire Engine?

The minifigures make up about 5% of the set value ($4.32 out of $83.88). Most of the value is in the complete set package, so selling it whole is likely the better move unless you have buyers lined up for specific figures.

Is LEGO Fire Engine (60112-1) retired?

Yes, Fire Engine was released in 2016 and has been retired from retail for several years. Retired LEGO sets are only available on the secondary market through BrickLink, eBay, or other resale platforms.

How do I check if my Fire Engine set is complete?

Use the parts list on this page to check every piece and all 3 minifigures. For the minifigures specifically, you can use the brick'em scanner to identify each figure from a photo and confirm it matches what should be in this set. Missing pieces can be individually sourced on BrickLink.

Fire Engine

60112-1·Town / City·2016·3 minifigs·148 parts

Used Avg

$83.88

New Avg

$108.00

Add to your inventory Scan the minifigs

About Fire Engine

Fire Engine (60112-1) is a LEGO Town / City set released in 2016, currently averaging $83.88 used on BrickLink. It comes with 3 minifigures worth a combined $4.32. The set has retired from retail, so secondary market is the only option. The full parts inventory runs 148 pieces.

Part-out value

Parts (148)

Plate, Modified 2 x 2 with Pin Hole - Full Cross Support Underneath

Black×2

Brick, Modified 1 x 2 with Studs on 1 Side

Red×4

Plate, Round 6 x 6 with Hole

Light Bluish Gray

Ladder 16 x 3.5 with Side Supports

White×2

Tile 2 x 2 Corner

White×2

Slope, Curved 2 x 2 x 2/3

Red

Slope, Curved 2 x 2 x 2/3

Dark Bluish Gray

Ladder 16 x 2 1/2 with 15 Rungs

Light Bluish Gray

Brick, Modified 1 x 4 with Masonry Profile

Medium Nougat×2

Tile, Round 2 x 2 with Hole

Red

Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)

Light Bluish Gray×2

Tile, Round 2 x 2 with Open Stud

Dark Bluish Gray

Minifigure, Utensil Radio (Walkie-Talkie) with Detailed Grille

Black

Minifigure, Weapon Gun, Mini Blaster / Shooter / Fire Nozzle with Tow Ball Socket and Dark Bluish Gray Trigger (23922 / 15392)

Yellow

Tile, Modified 1 x 2 Grille with Bottom Groove

Dark Bluish Gray×7

Tile, Modified 1 x 2 Grille with Bottom Groove

Light Bluish Gray×5

Wedge, Plate 3 x 6 Cut Corners

Red

Plate 2 x 2 Corner

Dark Bluish Gray×2

Tile 1 x 4

Dark Bluish Gray

Tile 1 x 4

Light Bluish Gray×2

Tile, Modified 1 x 2 with Bar Handle

Yellow

Minifigure, Visor Standard

Trans-Brown×2

Brick 1 x 2 x 5

Tan×2

Tile, Modified 2 x 2 with Pin

Light Bluish Gray

Plate, Round 2 x 2 with Rounded Bottom (Boat Stud)

Trans-Orange×2

Brick, Modified 1 x 2 with Grille / Fluted Profile

Light Bluish Gray×2

Plate, Modified 1 x 4 with Wheels Holder

Black×2

Brick 2 x 2

Red×4

Brick 2 x 2

Dark Bluish Gray×3

Brick 1 x 2

Dark Bluish Gray×4

Plate, Modified 1 x 4 with Bar Arm Down

Black

Brick 1 x 1

Red×8

Brick 1 x 6

Red

Brick 1 x 6

Dark Bluish Gray×4

Brick 1 x 4

Dark Bluish Gray

Container, Crate 3 x 4 x 1 2/3 with Handholds

Medium Nougat

Minifigure, Utensil Tool Circular Blade Saw

Dark Bluish Gray

Plate 2 x 4

Dark Bluish Gray×3

Plate 2 x 3

Yellow

Plate 2 x 3

Blue×2

Plate 2 x 2

Dark Bluish Gray

Plate 1 x 2

White

Plate 1 x 2

Yellow×5

Plate 1 x 2

Blue

Plate 1 x 2

Black×6

Plate 1 x 2

Dark Bluish Gray

Brick, Modified 1 x 2 with Open O Clip Thick (Vertical Grip)

Red×4

Plate 1 x 1

Trans-Dark Blue×7

Plate 6 x 16

Dark Bluish Gray

Plate 4 x 4

Yellow×2

Plate 4 x 6

Red

Plate 4 x 6

Dark Bluish Gray

Plate 2 x 8

Black

Brick, Round 2 x 2 x 2 Robot Body with Bottom Axle Holder (x Shape / + Orientation)

Dark Bluish Gray

Hinge Brick 1 x 2 Locking with 2 Fingers Vertical End

Red×4

Bar 4L (Lightsaber Blade / Wand)

Yellow×4

Slope 45 2 x 2

Dark Bluish Gray

Hinge Cylinder 1 x 3 Locking with 1 Finger and 2 Fingers on Ends with Hole

Black×4

Brick, Round 1 x 1

Yellow

Brick, Round 1 x 1

Black

Brick, Round 1 x 1

Light Bluish Gray

Tile 2 x 2

Blue

Tile 1 x 2

Yellow×2

Tile 1 x 2

Red×3

Tile 1 x 2

Trans-Dark Blue×6

Plate, Modified 1 x 2 with Door Rail

Yellow

Plate, Modified 1 x 2 with Door Rail

Light Bluish Gray×4

Technic, Liftarm, Modified Bent Thick 1 x 7 (4 - 4)

Red×2

Slope 33 3 x 2

Dark Bluish Gray×2

Plate 1 x 8

Red×2

Brick 1 x 3

Red×2

Slope, Inverted 45 2 x 1

Red×8

Plate 1 x 6

White×5

Plate 1 x 6

Red×3

Technic, Plate 2 x 4 with 3 Holes

Light Bluish Gray×2

Plate 1 x 4

White×6

Plate 1 x 4

Red×4

Plate 1 x 4

Blue

Plate 2 x 6

Yellow

Plate 2 x 6

Red×2

Plate 2 x 6

Dark Bluish Gray×4

Plate 2 x 6

Light Bluish Gray×2

Vehicle, Steering Stand 1 x 2 with Black Steering Wheel

Yellow

Plate 2 x 10

Light Bluish Gray

Minifigure, Utensil Axe

Black

Minifigure, Utensil Cup

Yellow

Plate 6 x 6

Red×3

Plate 6 x 6

Light Bluish Gray×2

Plate, Round 1 x 1

Trans-Light Blue×7

Plate, Round 1 x 1

Dark Bluish Gray×2

Plate, Round 1 x 1

Light Bluish Gray×3

Minifigure, Utensil Seat / Chair 2 x 2

Yellow

Bar 1 x 4 x 2 with Open Studs

Yellow×2

Bar 1 x 4 x 2 with Open Studs

Black

Ladder 1 1/2 x 2 x 2

Dark Bluish Gray

String Reel 2 x 4 x 2 Drum

Black

String Reel 2 x 4 x 2 Holder

Red

Plate 2 x 16

Light Bluish Gray×3

Technic, Axle 1L with Pin with Friction Ridges

Blue×2

Container, Box 2 x 2 x 2

Red×2

Container, Box 2 x 2 x 2 Door with Slot

Light Bluish Gray×2

Hinge Plate 1 x 2 Locking with 1 Finger on End without Bottom Groove

White×4

Plate, Modified 2 x 2 with Wheel Holder

Black×4

Tap 1 x 1 without Hole in Nozzle End

Yellow×2

Tap 1 x 1 without Hole in Nozzle End

Light Bluish Gray×2

Vehicle, Mudguard 4 x 2 1/2 x 1 2/3 with Arch Round

White×4

Wedge 4 x 6 x 2/3 Triple Curved

Red×2

Slope 30 1 x 1 x 2/3

Trans-Yellow×3

Slope 30 1 x 1 x 2/3

Dark Bluish Gray×3

Panel 1 x 6 x 5

Tan×2

Sticker Sheet for Set 60112 - International Version - (24514/6133142)

(Not Applicable)

Wheel 11mm D. x 12mm, Hole Notched for Wheels Holder Pin

Light Bluish Gray×8

Panel 1 x 4 x 3 with Side Supports - Hollow Studs

Red×3

Brick, Modified 1 x 1 x 3 with 2 Clips (Vertical Grip) - Hollow Stud

Red×4

Window 1 x 4 x 3 - No Shutter Tabs

Red×2

Window 1 x 4 x 3 - No Shutter Tabs

Black

Door, Frame 1 x 4 x 6 with 2 Holes on Top and Bottom

Black

Glass for Window 1 x 4 x 3 - Opening

Trans-Light Blue×2

Door 1 x 4 x 6 with 4 Panes and Stud Handle

Green

Slope, Curved 2 x 1 x 1 1/3 with Recessed Stud

Blue×2

Wedge, Plate 6 x 6 Cut Corner

Black

Wave Rounded Straight with Bar End (Castle Dragon Flame / Seaweed / Water)

Trans-Orange×4

Turntable 4 x 4 Square Base, Locking

Black

Door, Frame 1 x 4 x 4 Lift

Red×2

Door 1 x 4 x 4 Lift

Light Bluish Gray×2

Brick, Modified 2 x 4 with Pins

Dark Bluish Gray×2

Tile 1 x 3

White×2

Plate, Modified 1 x 2 with Clip on End (Horizontal Grip)

Black×2

Windscreen 1 x 6 x 3

Trans-Light Blue

Tile 1 x 6

Red

Tile 1 x 6

Light Bluish Gray×7

Bracket 5 x 2 x 2 1/3 with 2 Holes and Bottom Stud Holder

Black×4

Plate, Round 1 x 1 with Open Stud

Trans-Orange×5

Tile 2 x 4

Dark Bluish Gray×2

Panel 1 x 2 x 2 with Side Supports - Hollow Studs

Red×4

Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper)

Black

Plate, Modified 2 x 6 x 2/3 with 4 Studs on Side

Red

Cylinder 1 x 5 1/2 with Bar Handle (Friction Cylinder)

Red×2

Bar 5L with Handle (Friction Ram)

Light Bluish Gray×2

Tire 21mm D. x 12mm - Offset Tread Small Wide, Band Around Center of Tread

Black×8

Ladder Holder for Ladder 14 x 2.5

Light Bluish Gray

Plate, Modified 1 x 2 with Clip with Center Cut on Top

Red×2

Plate, Modified 1 x 4 with 2 Studs without Groove

White×2

Tile, Round 1 x 1

Trans-Dark Blue×15

Tile, Round 1 x 1

Trans-Red×3

Tile, Round 1 x 1

Trans-Orange×8

Bracket 1 x 2 - 1 x 2 Inverted

White×2

String with End Tow Ball (63L Overall) with (Same Color) Tow Ball Pattern

Black

Fire Engine

About Fire Engine

Part-out value

Minifigures in Fire Engine (3)

Parts (148)

Common questions about Fire Engine

How much is LEGO Fire Engine (60112-1) worth?

What minifigures come in LEGO set 60112-1?

Is it worth parting out LEGO Fire Engine?

Is LEGO Fire Engine (60112-1) retired?

How do I check if my Fire Engine set is complete?

More Town / City sets

Explore more

Company

Legal