How much is LEGO Donut Shop Opening (60233-1) worth?

Donut Shop Opening sells for an average of $56.27 used and $91.20 new/sealed on BrickLink based on 6 months of completed sales. As a retired set, prices tend to hold steady or appreciate over time, especially for complete sets with original packaging. Actual prices vary with completeness. Missing minifigures or key parts will lower the value.

What minifigures come in LEGO set 60233-1?

This set includes 10 minifigures: Police - City Bandit Crook, Black Knit Cap, Black Stubble ($1.28), Police Officer - Male, Dark Blue Shirt with Harness, Black Legs, Black Coiled Hair, Sunglasses (Duke DeTain) ($1.52), Man, Dark Red Jacket with Bright Light Blue Shirt, Dark Blue Legs, Dark Red Cap with Hole, Moustache (Taxi Driver) ($2.14), Cameraman - Dark Blue Jacket, Sand Blue Legs ($2.01), plus 6 more. The minifigures have a combined BrickLink value of $19.14. Each figure is linked above with individual pricing if you're looking to buy or sell specific characters.

Is it worth parting out LEGO Donut Shop Opening?

The minifigures make up about 34% of the set value ($19.14 out of $56.27). Most of the value is in the complete set package, so selling it whole is likely the better move unless you have buyers lined up for specific figures.

Is LEGO Donut Shop Opening (60233-1) retired?

Yes, Donut Shop Opening was released in 2019 and has been retired from retail for several years. Retired LEGO sets are only available on the secondary market through BrickLink, eBay, or other resale platforms.

How do I check if my Donut Shop Opening set is complete?

Use the parts list on this page to check every piece and all 10 minifigures. For the minifigures specifically, you can use the brick'em scanner to identify each figure from a photo and confirm it matches what should be in this set. Missing pieces can be individually sourced on BrickLink.

Donut Shop Opening

60233-1·Town / City·2019·10 minifigs·333 parts

Used Avg

$56.27

New Avg

$91.20

Add to your inventory Scan the minifigs

About Donut Shop Opening

Donut Shop Opening (60233-1) is a LEGO Town / City set released in 2019, currently averaging $56.27 used on BrickLink. It comes with 10 minifigures worth a combined $19.14. The set has retired from retail, so secondary market is the only option. The full parts inventory runs 333 pieces.

Parts (333)

Wheel 14mm D. x 9.9mm with Center Groove, Fake Bolts and 6 Double Spokes

×4

Tire 21 x 9.9

×4

Brick, Modified 1 x 2 with Studs on 1 Side

×2

Brick, Modified 1 x 2 with Studs on 1 Side

Plate, Round 6 x 6 with Hole

Bracket 5 x 2 x 1 1/3 with 2 Holes and Bottom Tube

×3

Minifigure, Headgear Cap - Short Curved Bill with Seams and Hole on Top

Plate, Modified 4 x 4 with 2 Open O Clips (Horizontal Grip)

Plate, Modified 1 x 2 with Clip on Side (Horizontal Grip)

×4

Slope, Curved 2 x 1 x 2/3

×2

Minifigure, Utensil Musical Instrument, Guitar Electric

Brick, Modified 2 x 4 - 1 x 4 with 2 Recessed Studs and Thin Side Arches

×2

Vehicle, Exhaust Pipe with Technic Pin, Flat End and Pin with Round Hole

×2

Panel 1 x 4 x 2 with Side Supports - Hollow Studs

×2

Tile 2 x 2 Corner

×2

Tile, Round 2 x 2 with Bottom Stud Holder

Slope, Curved 2 x 2 x 2/3

×2

Slope, Curved 2 x 2 x 2/3

Road Sign 2 x 2 Square with Open O Clip

Road Sign 2 x 2 Square with Open O Clip with Curved Blue Lines and Small Black Squares Pattern (Computer Screen)

Brick, Round 2 x 2 Dome Bottom

Plate, Round 1 x 1 with Vertical Swirl / Twist

×6

Minifigure, Utensil Cup, Take Out Cup without Top Hole

×2

Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)

×4

Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)

×8

Bracket 3 x 2 x 1 1/3 with Bottom Tube

Tile, Round 2 x 2 with Open Stud

×2

Motorcycle Fairing, Racing (Sport) Bike

Motorcycle Chassis, Clip for Handle

Plate, Round Corner 2 x 6 Double

×2

Bar Holder with Handle

Brick 2 x 2 Corner

×2

Minifigure, Utensil Net - Small Meshed

Technic, Panel Car Mudguard Arched 15 x 2 x 5 Straight Top

Tile, Modified 1 x 2 Grille with Bottom Groove

×2

Tile, Modified 1 x 2 Grille with Bottom Groove

×3

Tile, Modified 1 x 2 Grille with Bottom Groove

×5

Tile, Modified 1 x 2 Grille with Bottom Groove

×9

Plate 2 x 2 Corner

×2

Plate 2 x 2 Corner

×2

Hinge Plate 1 x 4 Swivel (2429 / 2430)

×2

Hinge Plate 1 x 4 Swivel (2429 / 2430)

×2

Tile 1 x 4

×2

Tile 1 x 4

Wheel Wheelchair with Molded Black Hard Rubber Tire Pattern

×2

Tile, Modified 1 x 2 with Bar Handle

×2

Plate 2 x 12

Minifigure, Headgear Helmet Motorcycle (Standard)

Minifigure, Visor Standard

×2

Brick 2 x 6

Brick, Round Corner 5 x 5 without Studs

×4

Brick, Round Corner 5 x 5 x 1 without Studs with Medium Azure, Red and White Topping Pattern (Donut / Doughnut)

×4

Brick 1 x 16

Wheel Skateboard / Trolley

×2

Plate, Round 2 x 2 with Rounded Bottom (Boat Stud)

Technic, Axle 1L with Tow Ball

×2

Tile, Round Corner 2 x 2 Macaroni

×4

Brick, Modified 1 x 2 with Grille / Fluted Profile

×5

Bracket 1 x 2 - 1 x 4 with Rounded Corners at the Bottom

×2

Wedge 2 x 1 x 2/3 Right

Wedge 2 x 1 x 2/3 Left

Brick 2 x 4

×5

Tire 14mm D. x 9mm Smooth Small Wide Slick

×6

Brick 2 x 2

×3

Brick 2 x 2

×3

Brick 2 x 2

×2

Minifigure, Utensil Handlebars

×2

Brick 1 x 2

×4

Brick 1 x 2

×2

Brick 1 x 2

×9

Brick 1 x 2

×2

Brick 1 x 1

×2

Brick 1 x 1

×6

Brick 1 x 1

×2

Brick 2 x 10

Brick 1 x 8

Brick 1 x 6

×9

Brick 1 x 4

×4

Brick 1 x 4

×5

Chain 21 Links (16-17L)

Brick, Modified 1 x 2 with Log Profile

×2

Plate 2 x 4

×4

Plate 2 x 4

×2

Plate 2 x 3

×2

Plate 2 x 2

×7

Plate 2 x 2

Plate 1 x 2

×3

Plate 1 x 2

×8

Plate 1 x 2

×8

Brick, Modified 1 x 2 with Bar Handle on Side

×3

Brick, Modified 1 x 2 with Open O Clip Thick (Vertical Grip)

Plate 1 x 1

×5

Plate 1 x 1

×2

Plate 1 x 1

×2

Plate 1 x 1

×3

Plate 1 x 1

×5

Plate 6 x 16

Plate 4 x 4

×2

Plate 4 x 6

×2

Plate 6 x 10

Plate 2 x 8

Plate 4 x 8

×2

Tile, Modified 2 x 3 with 2 Open O Clips

×2

Plate 6 x 8

×2

Slope 45 2 x 2 with Radar and Disk Slot Pattern

×2

Slope 45 2 x 2 with Windows in Computer Screen Pattern

×2

Panel 1 x 4 x 1

×2

Panel 1 x 4 x 1

×2

Panel 1 x 4 x 1

×2

Brick, Modified 1 x 4 with Studs on Side

×2

Brick, Round 1 x 1

×2

Brick, Round 1 x 1

×2

Tile 1 x 2

×8

Tile 1 x 2

×2

Tile 1 x 2

×2

Tile 1 x 2

×3

Tile 1 x 2

×3

Tile 1 x 2 with Computer Keyboard Standard Pattern

Tile 1 x 2 with Currency / Money, 100 Bill / Note Pattern

×2

Tile 1 x 1

×2

Technic, Brick 1 x 2 with Holes

×2

Technic, Axle and Pin Connector Angled #2 - 180 degrees

Technic, Axle 2L Notched

Technic, Liftarm Thin 1 x 4 - Axle Holes

×4

Brick 1 x 2 x 2 with Inside Stud Holder

×2

Technic, Pin Connector Plate 1 x 2 x 1 2/3 with 2 Holes on Top

×2

Technic, Pin 3L without Friction Ridges

Bar 1L with 1 x 1 Round Plate with Hollow Stud

×2

Technic, Gear Worm Screw, Long, Axle Opening Type II

Brick, Modified 1 x 1 x 1 2/3 with Studs on Side

×4

Tile, Modified 2 x 2 with Studs on Edge

Plate 1 x 8

×2

Plate 1 x 8

×2

Plate, Round 1 x 2 with Open Studs

Tile, Modified 2 x 2 Triangular

×2

Technic, Gear 24 Tooth with 1 Axle Hole

Slope, Inverted 45 2 x 2 with Flat Bottom Pin

×2

Plate 1 x 6

×4

Plate 1 x 6

×2

Plate 1 x 6

×2

Plate 1 x 6

×3

Plate 1 x 6

Slope 75 2 x 2 x 3 - Solid Studs

×2

Technic, Brick 1 x 2 with Hole

Technic, Axle 4L

×2

Plate 1 x 4

×6

Plate 1 x 4

×5

Plate 1 x 4

×3

Plate 1 x 4

×2

Plate 1 x 4

×6

Plate 2 x 6

×4

Door 1 x 3 x 1 Right

Door 1 x 3 x 1 Left

Vehicle, Steering Stand 1 x 2 with Black Steering Wheel

Minifigure, Utensil Cup

×3

Minifigure, Utensil Signal Paddle

Hinge Brick 1 x 2 Base

×2

Brick, Round 2 x 2 with Axle Hole

×3

Antenna 4H - Flat Top

×2

Dish 4 x 4 Inverted (Radar) with Solid Stud

Minifigure, Utensil Tool Spanner Wrench / Screwdriver

Plate, Round 2 x 2 with Axle Hole

Plate, Round 1 x 1

×5

Plate, Round 1 x 1

×2

Plate, Round 1 x 1

×2

Plate, Round 1 x 1

×5

Plate, Round 1 x 1

×9

Minifigure, Utensil Seat / Chair 2 x 2

×3

Plate, Modified 1 x 1 with Open O Clip Thick (Vertical Grip)

×2

Technic, Liftarm Thick 1 x 13

Hinge Cylinder 1 x 3 Locking with 1 Finger and Pin with Round Hole and Friction Ridges on Ends

×2

Tile 1 x 8

Technic, Axle and Pin Connector Perpendicular Double Split

Bracket 2 x 2 - 1 x 2 Centered

Plate, Modified 1 x 4 with 2 Studs with Groove

Windscreen 2 x 6 x 2

Minifigure, Utensil Skateboard Deck

Technic Bush 1/2 Smooth

×3

Technic, Pin 1/2 without Friction Ridges

×3

Slope 33 3 x 1

×2

Slope 33 3 x 1

×2

Container, Box 2 x 2 x 2

Container, Box 2 x 2 x 2 Door with Slot

Minifigure, Utensil Camera with Side Sight (Space Gun)

Wedge, Plate 3 x 2 Right

Wedge, Plate 3 x 2 Left

Dish 3 x 3 Inverted (Radar)

Technic, Axle 7L

Hinge Plate 1 x 2 Locking with 2 Fingers on End

×2

Hinge Plate 1 x 2 Locking with 1 Finger on Side with Bottom Groove

×2

Bracket 1 x 2 - 2 x 2

×4

Bracket 1 x 2 - 2 x 2

Plate, Modified 2 x 2 with Wheel Holder

×16

Flag 4 x 1 Wave Right

×2

Minifigure, Utensil Tool Mallet / Hammer

Cone 1 x 1 with Top Groove

Antenna Small Base with Black Lever (4592 / 4593)

×2

Brick, Modified 1 x 2 x 2/3 with Studs on Sides and Extended Stud Receptacle

Tap 1 x 1 without Hole in Nozzle End

×3

Plate, Modified 1 x 2 with Bar Arm Up (Horizontal Arm 5mm)

×2

Pneumatic T Piece Second Version (T Bar with Ball in Center)

×2

Slope, Curved 2 x 2 x 2/3 with 2 Studs and Curved Sides

×2

Plate, Modified 1 x 2 with Bar Handle on Side - Closed Ends

×2

Panel 1 x 2 x 1 with Rounded Corners

×2

Panel 1 x 2 x 1 with Rounded Corners

×3

Plate, Modified 1 x 1 with Tooth Horizontal

Tricycle Frame

Vehicle, Mudguard 4 x 2 1/2 x 1 2/3 with Arch Round

×4

Vehicle, Mudguard 4 x 2 1/2 x 1 2/3 with Arch Round

×6

Tire 21mm D. x 6mm City Motorcycle

×2

Wheel 15mm D. x 6mm City Motorcycle

×2

Slope, Curved 3 x 1

×4

Wedge 4 x 6 x 2/3 Triple Curved

Vehicle, Base 4 x 12 x 3/4 with 2 x 4 Recessed Center with Smooth Underside

Brick, Modified 1 x 2 with Studs on 2 Sides

×8

Slope, Inverted 45 6 x 1 Double with 1 x 4 Cutout

×2

Slope, Inverted 45 6 x 1 Double with 1 x 4 Cutout

×2

Slope, Inverted 45 6 x 1 Double with 1 x 4 Cutout

Slope 30 1 x 1 x 2/3

×3

Slope 30 1 x 1 x 2/3

×3

Slope 30 1 x 1 x 2/3

×2

Slope 30 1 x 1 x 2/3

×3

Slope 30 1 x 1 x 2/3

×7

Slope 30 1 x 1 x 2/3

×2

Slope 30 1 x 1 x 2/3

×5

Slope 30 1 x 1 x 2/3

×3

Minifigure, Propeller 2 Blade Twisted Tiny with Small Pin

×3

Brick, Round 2 x 2 Dome Top

Crane Arm Outside, Wide with Pin Hole at Mid-Point

Windscreen 3 x 4 x 1 1/3 Large Glass Surface

×2

Glass for Window 1 x 4 x 6

×2

Glass for Window 1 x 4 x 6

×2

Bar with Light Cover (Bulb) / Bionicle Barraki Eye

×3

Door 1 x 3 x 4 Right - Open Between Top and Bottom Hinge

Door 1 x 3 x 4 Left - Open Between Top and Bottom Hinge

Panel 1 x 6 x 5

×2

Panel 1 x 6 x 5

×2

Wheel 11mm D. x 12mm, Hole Notched for Wheels Holder Pin

×10

Sticker Sheet for Set 60233 - (44578/6248705)

Plate, Modified 1 x 2 with 2 Open O Clips (Horizontal Grip)

Plate, Round 4 x 4 with Hole

Slope 18 4 x 1

×2

Plate, Modified 1 x 2 with Bar Handle on End

×2

Plate 1 x 12

Panel 1 x 4 x 3 with Side Supports - Hollow Studs

×2

Panel 1 x 4 x 3 with Side Supports - Hollow Studs

Door, Frame 1 x 4 x 6 with 2 Holes on Top and Bottom

×3

Door, Frame 1 x 4 x 6 with 2 Holes on Top and Bottom

×3

Door 1 x 4 x 6 with Stud Handle

Slope, Curved 2 x 4 x 1 1/3 with 4 Recessed Studs

×2

Plate, Modified 1 x 1 with Open O Clip (Horizontal Grip)

×2

Hinge Brick 2 x 2 Top Plate

×2

Minifigure, Utensil Handcuffs

×2

Turntable 4 x 4 Square Base, Locking

×3

Plate, Modified 2 x 2 with Wheels Holder Wide and Hole

×3

Container, Box 2 x 2 x 2 - Top Opening

Brick, Modified 2 x 2 with Pin and Axle Hole

×2

Technic, Pin Connector Round 2L with Slot (Pin Joiner Round)

×2

Ice Cream Scoops

Tile 1 x 3

×2

Bar 6L with Stop Ring

Technic, Gearbox 2 x 4 x 3 1/3

Tile 1 x 6

×2

Tile 1 x 6

×6

Tile 1 x 6

×5

Wheel 8mm D. x 9mm for Slicks, Hole Notched for Wheels Holder Pin, Reinforced Back

×6

Slope 30 1 x 2 x 2/3

×3

Tile 2 x 4

×2

Tile 2 x 4

Brick, Round 4 x 4 with Hole

Brick, Modified 1 x 1 with Stud on Side

Plate, Modified 2 x 6 x 2/3 with 4 Studs on Side

Tire 21mm D. x 12mm - Offset Tread Small Wide, Band Around Center of Tread

×10

Tile, Modified 3 x 4 with 4 Studs in Center

Slope, Curved 2 x 4 x 2/3 with Bottom Tubes

×2

Slope, Curved 2 x 4 x 2/3 with Bottom Tubes

Minifigure, Utensil Microphone

×3

Plate 2 x 14

×3

Plate, Modified 1 x 2 with Clip with Center Cut on Top

Plate 8 x 16

×2

Windscreen 3 x 6 x 2

Minifigure, Utensil Tool Crowbar

Wheel Bicycle with Molded Black Hard Rubber Tire Pattern

Slope 45 2 x 1 with 2/3 Cutout

×4

Brick, Round 2 x 2 with Axle Hole and Grille / Fluted Profile

Slope, Curved 4 x 1 x 2/3 Double

×3

Slope, Curved 4 x 1 x 2/3 Double

Brick and Axle Separator

Tile, Round 1 x 1

×3

Tile, Round 1 x 1

×9

Tile, Round 1 x 1

×3

Tile, Round 1 x 1 with Cookie with Tan Frosting and Reddish Brown Chocolate Sprinkles Pattern

×5

Tile, Round 1 x 1 with Donut / Doughnut with Dark Pink Frosting and Sprinkles Pattern

×4

Tile, Round 1 x 1 with Dark Orange Circle, White Spots and Dark Red Spot Pattern

×3

Wedge 6 x 4 x 2/3 Quad Curved

Brick, Modified 1 x 2 with Masonry Profile

×11

Teddy Bear with Black Eyes, Nose, and Mouth, Tan Stomach and Muzzle Pattern

Bracket 1 x 2 - 2 x 2 Inverted

×4

Bracket 1 x 2 - 1 x 2 Inverted

Bracket 1 x 2 - 1 x 2

×2

Bracket 1 x 2 - 1 x 2

Donut Shop Opening

About Donut Shop Opening

Part-out value

Seller notes

Minifigures in Donut Shop Opening (10)

Parts (333)

Common questions about Donut Shop Opening

How much is LEGO Donut Shop Opening (60233-1) worth?

What minifigures come in LEGO set 60233-1?

Is it worth parting out LEGO Donut Shop Opening?

Is LEGO Donut Shop Opening (60233-1) retired?

How do I check if my Donut Shop Opening set is complete?

More Town / City sets

Explore more

Company

Legal