How much is LEGO Fire Rescue Helicopter (60281-1) worth?

Fire Rescue Helicopter sells for an average of $35.14 used and $25.16 new/sealed on BrickLink based on 6 months of completed sales. As a retired set, prices tend to hold steady or appreciate over time, especially for complete sets with original packaging. Actual prices vary with completeness. Missing minifigures or key parts will lower the value.

What minifigures come in LEGO set 60281-1?

This set includes 3 minifigures: Fire Fighter - Clemmons, White Helmet, Trans-Brown Visor ($1.22), Construction Worker - Male, Orange Safety Vest with Reflective Stripes, Dark Blue Legs, Red Construction Helmet, Sweat Drops ($1.57), Fire - Reflective Stripes, Bright Light Orange Suit, White Helmet, Headset ($1.55). The minifigures have a combined BrickLink value of $4.34. Each figure is linked above with individual pricing if you're looking to buy or sell specific characters.

Is it worth parting out LEGO Fire Rescue Helicopter?

The minifigures make up about 12% of the set value ($4.34 out of $35.14). Most of the value is in the complete set package, so selling it whole is likely the better move unless you have buyers lined up for specific figures.

Is LEGO Fire Rescue Helicopter (60281-1) retired?

Yes, Fire Rescue Helicopter was released in 2021 and has been retired from retail for several years. Retired LEGO sets are only available on the secondary market through BrickLink, eBay, or other resale platforms.

How do I check if my Fire Rescue Helicopter set is complete?

Use the parts list on this page to check every piece and all 3 minifigures. For the minifigures specifically, you can use the brick'em scanner to identify each figure from a photo and confirm it matches what should be in this set. Missing pieces can be individually sourced on BrickLink.

Fire Rescue Helicopter

60281-1·Town / City·2021·3 minifigs·114 parts

Used Avg

$35.14

New Avg

$25.16

Add to your inventory Scan the minifigs

About Fire Rescue Helicopter

Fire Rescue Helicopter (60281-1) is a LEGO Town / City set released in 2021, currently averaging $35.14 used on BrickLink. It comes with 3 minifigures worth a combined $4.34. The set has retired from retail, so secondary market is the only option. The full parts inventory runs 114 pieces.

Parts (114)

Plate, Modified 2 x 2 with Pin Hole - Full Cross Support Underneath

Brick, Modified 1 x 2 with Studs on 1 Side

×2

Plate, Modified 1 x 2 with Clip on Side (Horizontal Grip)

Slope, Curved 4 x 1 Inverted

×2

Plate, Modified 1 x 2 with Small Tow Ball Socket on Side

Slope, Curved 2 x 2 x 2/3

×4

Slope, Curved 2 x 2 x 2/3

Plate, Modified 3 x 3 Cross

Propeller 3 Blade 9 Diameter with Center Recessed

Technic, Liftarm Thick 1 x 1 (Spacer)

×3

Motorcycle Fairing, Racing (Sport) Bike

Motorcycle Chassis, Clip for Handle

Minifigure, Utensil Radio (Walkie-Talkie) with Detailed Grille

Slope, Inverted 45 6 x 2 Double with 2 x 4 Cutout

Tile, Modified 1 x 2 Grille with Bottom Groove

×10

Plate, Modified 2 x 2 Thin with Plane Single Wheel Holder

×3

Tile 1 x 4

×2

Tile 1 x 4

Tile 1 x 4 with 2 Gauges, Lever and White, Red and Yellow Buttons Pattern

Tile, Modified 1 x 2 with Bar Handle

Minifigure, Visor Standard

Brick 2 x 6

Tile, Modified 2 x 2 with Pin

Brick, Round Tube 1 x 1 d. 90 degrees Elbow Macaroni - No Stud - Type 2 - Axle Hole

Brick 2 x 4

Minifigure, Utensil Handlebars

Brick 1 x 2

×3

Brick 2 x 8

Bar 7 x 3 with 4 Clips (Ladder)

Plate 2 x 4

×3

Plate 2 x 4

×2

Plate 2 x 4

×2

Plate 2 x 2

Brick, Modified 1 x 2 with Bar Handle on Side

×2

Plate 6 x 10

Plate 2 x 8

Slope 45 2 x 2

×4

Slope 45 2 x 2

×4

Slope 45 2 x 2 with Green Control Screen, Gauges, Light Bluish Gray Lever and Silver Buttons Pattern

Brick, Modified 1 x 4 with Studs on Side

×2

Wedge, Plate 4 x 4 Cut Corner

Brick, Modified 2 x 4 with Pin on Top and Side Cutouts

Brick, Round 1 x 1

Brick 1 x 2 without Bottom Tube

×4

Vehicle, Steering Wheel Small, 2 Studs Diameter

Tile 2 x 2

×2

Plate, Modified 1 x 2 with Door Rail

Brick 1 x 2 x 2 with Inside Stud Holder

×4

Plate 1 x 8

×2

Plate 1 x 8

×2

Plate 1 x 3

×2

Plate 1 x 6

×3

Technic, Pin without Friction Ridges

×2

Technic, Brick 1 x 2 with Hole

×2

Plate 2 x 10

Plate 6 x 6

Minifigure, Utensil Tool Spanner Wrench / Screwdriver

Plate, Round 2 x 2 with Axle Hole

Plate, Round 1 x 1

×5

Plate, Round 1 x 1

×2

Plate, Round 1 x 1

×3

Plate, Modified 1 x 1 with Open O Clip Thick (Vertical Grip)

×3

Bracket 2 x 2 - 1 x 2 Centered

×2

Dish 6 x 6 Inverted (Radar) Webbed - Type 2 (Underside Attachment Positions at 90 degrees)

Technic, Axle 1L with Pin with Friction Ridges

×2

Hinge Plate 1 x 4 Locking Dual 1 Finger on Side

Bracket 1 x 2 - 2 x 2

×4

Wedge 16 x 4 Triple Curved with Reinforcements

Antenna Small Base with Black Lever (4592 / 4593)

×3

Antenna Small Base with Black Lever (4592 / 4593)

×2

Tap 1 x 1 without Hole in Nozzle End

×2

Engine, Smooth Large, 2 x 2 Thin Top Plate

×2

Engine, Smooth Large, Center with Fan/Gear and Axle End

×2

Projectile Launcher, 2 x 6 x 1 1/3 Spring Shooter with Light Bluish Gray Top

×2

Tire 21mm D. x 6mm City Motorcycle

×2

Wheel 15mm D. x 6mm City Motorcycle

×2

Wedge 10 x 3 Left

Wedge 10 x 3 Right

Wedge, Plate 2 x 4

Slope, Inverted 45 6 x 4 Double with 4 x 4 Cutout and 3 Holes

Sticker Sheet for Set 60281 - (74139/6329638)

Window 2 x 4 x 3 - Hollow Studs

Glass for Window 1 x 2 x 2 Flat Front

×4

Window 1 x 4 x 2 Plane, Single Top Hole and Single Bottom Hole for Glass

×2

Tile, Round 8 x 8 with 4 Studs in Center

Tail Shuttle

Technic, Pin Connector Round 2L with Slot (Pin Joiner Round)

Plate, Modified 2 x 16 with Angled Side Extensions and Axle Hole (Rotor Blade)

×2

Wheel Small with Stub Axles with Molded Black Hard Rubber Tire Pattern

×3

Technic, Pin with Friction Ridges and Tow Ball with Round Pin Hole

Propeller 4 Blade 5 Diameter with Rounded Ends and Closed Hub

Projectile Arrow, Solid Shaft with Round End with 4 Notches

×3

Wave Rounded 1 x 4 with 2 Studs on Ends (Flame, Rock)

×5

Slope 30 1 x 2 x 2/3

×3

Tile 2 x 4

×2

Tile 2 x 4

×2

Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper)

×2

Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper)

Aircraft Fuselage Forward Bottom Curved 6 x 10 with 3 Holes

Glass for Aircraft Fuselage Curved Forward 6 x 10 Top with 3 Window Panes

Aircraft Fuselage Forward Top Curved 6 x 10 x 4 with 3 Window Panes

Plate 2 x 14

Hinge Train Gate 2 x 4 Locking Dual 2 Fingers without Rear Reinforcements

Minifigure, Utensil Stretcher without Bottom Hinges

Slope, Curved 4 x 1 x 2/3 Double

×2

Support 2 x 2 x 10 Girder Triangular Vertical - Type 4 - 3 Posts, 3 Sections

×2

Tile, Round 1 x 1

×6

Tile, Round 1 x 1

×2

Tile, Round 1 x 1

×2

Fire Rescue Helicopter

About Fire Rescue Helicopter

Part-out value

Minifigures in Fire Rescue Helicopter (3)

Parts (114)

Common questions about Fire Rescue Helicopter

How much is LEGO Fire Rescue Helicopter (60281-1) worth?

What minifigures come in LEGO set 60281-1?

Is it worth parting out LEGO Fire Rescue Helicopter?

Is LEGO Fire Rescue Helicopter (60281-1) retired?

How do I check if my Fire Rescue Helicopter set is complete?

More Town / City sets

Explore more

Company

Legal