How much is LEGO Bulldozer (60466-1) worth?

Bulldozer sells for an average of $45.74 used and $53.61 new/sealed on BrickLink based on 6 months of completed sales. Current retail availability may affect secondary market prices. Actual prices vary with completeness. Missing minifigures or key parts will lower the value.

What minifigures come in LEGO set 60466-1?

This set includes 3 minifigures: Ted Brickle ($3.33), Construction Worker - Female, Dark Bluish Gray Overalls over Reddish Orange Safety Jacket with Reflective Stripes, Dark Bluish Gray Legs with Knee Pads, Red Construction Helmet with Dark Brown Ponytail Hair, Sunglasses ($2.41), Construction Worker - Male, Reddish Orange Safety Jacket with Reflective Stripes, Dark Bluish Gray Legs with Knee Pads, Red Construction Helmet ($2.41). The minifigures have a combined BrickLink value of $8.15. Each figure is linked above with individual pricing if you're looking to buy or sell specific characters.

Is it worth parting out LEGO Bulldozer?

The minifigures make up about 18% of the set value ($8.15 out of $45.74). Most of the value is in the complete set package, so selling it whole is likely the better move unless you have buyers lined up for specific figures.

Is LEGO Bulldozer (60466-1) retired?

Bulldozer was released in 2025. It should still be widely available at retail from LEGO and authorized retailers.

How do I check if my Bulldozer set is complete?

Use the parts list on this page to check every piece and all 3 minifigures. For the minifigures specifically, you can use the brick'em scanner to identify each figure from a photo and confirm it matches what should be in this set. Missing pieces can be individually sourced on BrickLink.

Bulldozer

60466-1·Town / City·2025·3 minifigs·181 parts

Used Avg

$45.74

New Avg

$53.61

Add to your inventory Scan the minifigs

About Bulldozer

Bulldozer (60466-1) is a LEGO Town / City set released in 2025, currently averaging $45.74 used on BrickLink. It comes with 3 minifigures worth a combined $8.15. It may still be available at retail from LEGO or authorized retailers. The full parts inventory runs 181 pieces.

Part-out value

Parts (181)

Brick, Modified 1 x 2 with Studs on 1 Side

×2

Wedge 3 x 4 x 2/3 Curved with Cutout

×2

Slope, Curved 4 x 1 Inverted

×2

Wedge 2 x 2 (Slope 45 Corner)

×2

Tile, Round 2 x 2 with Bottom Stud Holder

×2

Brick, Modified 1 x 4 with Masonry Profile

×4

Tile, Round 2 x 2 with Hole

Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)

×2

Brick, Round 2 x 2 with Pin Holes

Slope, Curved 33 2 x 2 Double / Inverted

×2

Arch 1 x 3 x 2 Inverted

×4

Technic, Liftarm Thick 1 x 1 (Spacer)

×3

Minifigure, Utensil Radio (Walkie-Talkie) with Detailed Grille

Tile, Round 1 x 1 with Bar and Small Pin Hole

×3

Slope, Inverted 45 2 x 1 with 2/3 Cutout

×6

Tile, Modified 1 x 2 Grille with Bottom Groove

Plate 2 x 2 Corner

×2

Wedge, Plate 2 x 2 Left

Wedge, Plate 2 x 2 Right

Tile 1 x 4

×2

Tile, Modified 1 x 2 with Bar Handle

×3

Brick 2 x 6

×4

Brick, Round Tube 1 x 1 d. 90 degrees Elbow Macaroni - No Stud - Type 2 - Axle Hole

Technic, Axle Connector 3L

Minifigure Utility Belt

Technic, Disk 3 x 3

×4

Plate, Modified 1 x 2 with 3 Claws / Rock Fingers

×3

Technic, Pin with Short Friction Ridges

×38

Tire Technic Wedge Belt Wheel

×8

Brick, Modified 1 x 2 with Grille / Fluted Profile

Brick, Modified 2 x 2 with Pins and Axle Hole

×2

Brick 2 x 4

Brick 2 x 3

×2

Brick 2 x 3

Brick 2 x 2

×3

Brick 1 x 2

×4

Brick 1 x 2

×2

Brick 1 x 1

×8

Brick 1 x 1

×2

Brick 1 x 4

×10

Brick 1 x 4

Slope, Curved 2 x 2 Double with 2 Hollow Studs

×10

Plate 2 x 4

×2

Plate 2 x 3

×6

Plate 2 x 3

×2

Plate 2 x 2

×2

Plate 2 x 2

×2

Plate 1 x 2

×3

Plate 1 x 2

×4

Plate 1 x 1

×3

Plate 1 x 1

×3

Plate 1 x 1

×5

Plate 4 x 10

×2

Slope 45 2 x 2

×2

Slope 45 2 x 1

×2

Brick, Modified 1 x 4 with Studs on Side

×4

Tile 1 x 2

×2

Tile 1 x 2

×6

Tile 1 x 1

×3

Tile 1 x 1 with Red Danger Stripes Pattern

×7

Technic, Liftarm, Modified U-Shape Thick 2 x 3 Perpendicular

×2

Plate, Modified 1 x 2 with Pin Hole on End

×2

Technic, Brick 1 x 2 with Holes

×6

Technic, Axle 2L Notched

×5

Technic, Liftarm Thick 1 x 5

×2

Technic, Brick 4 x 4 Open Center

Technic, Liftarm Thick 1 x 11

×2

Technic, Liftarm, Modified Bent Thick L-Shape 3 x 5

×2

Technic, Pin Connector Plate 1 x 2 x 1 2/3 with 2 Holes on Top

×4

Bar 1L with 1 x 1 Round Plate with Hollow Stud

×3

Brick, Modified 1 x 1 x 1 2/3 with Studs on Side

×4

Tile, Modified 2 x 2 with Studs on Edge

Plate, Modified 1 x 3 with 2 Studs (Double Jumper)

×4

Plate, Modified 1 x 3 with 2 Studs (Double Jumper)

×4

Plate 1 x 8

×4

Plate 1 x 8

×4

Wedge 5 x 2 Left

×2

Wedge 5 x 2 Right

×2

Technic, Gear 24 Tooth with 1 Axle Hole

×2

Slope, Inverted 45 2 x 2 with Flat Bottom Pin

×2

Slope, Inverted 45 2 x 1

×2

Plate 1 x 6

×2

Plate 1 x 6

×2

Technic, Brick 1 x 2 with Hole

×4

Technic, Brick 1 x 4 with Holes

×2

Technic, Brick 1 x 4 with Holes

×4

Technic, Brick 1 x 16 with Holes

×4

Technic, Axle 4L

Technic, Axle 8L

×2

Technic, Plate 2 x 4 with 3 Holes

Plate 1 x 4

×2

Technic, Plate 2 x 8 with 7 Holes

Technic, Axle 1L with Pin without Friction Ridges with Round Hole

×4

Plate 2 x 6

×4

Plate 2 x 6

×3

Plate 2 x 10

×2

Technic, Link Tread

×108

Technic, Brick 1 x 6 with Holes

×6

Minifigure, Utensil Tool Spanner Wrench / Screwdriver

Plate, Round 2 x 2 with Axle Hole

×4

Technic, Liftarm Thick 1 x 9

×4

Brick, Modified 1 x 1 with Headlight

×6

Plate, Round 1 x 1

×3

Plate, Modified 1 x 1 with Open O Clip Thick (Vertical Grip)

×2

Tile 1 x 8

×4

Bracket 2 x 2 - 1 x 2 Centered

×2

Plate, Modified 1 x 4 with 2 Studs with Groove

Technic Wedge Belt Wheel (Pulley)

×9

Wheel 11mm D. x 8mm with Center Groove, 4 Spokes

×2

Technic Bush 1/2 Smooth

×11

Plate 2 x 16

×3

Plate, Modified 2 x 2 x 2/3 with 2 Studs on Side - Hollow Bottom Tube

×6

Technic Crank Disk

×3

Technic Piston Small

×3

Technic, Axle 3L

×4

Wedge 4 x 4 x 2/3 Triple Curved

Slope 10 6 x 1

×2

Slope 10 6 x 1

×10

Windscreen 2 x 4 x 2 Vertical

Plate, Modified 1 x 2 with Bar Handle on Side - Closed Ends

×3

Pane for Window 1 x 4 x 6 Lattice Diamond

×3

Slope, Curved 3 x 1

×4

Slope 30 1 x 1 x 2/3

×3

Slope 30 1 x 1 x 2/3

×9

Technic, Axle and Pin Connector Hub with 3L Axle

×2

Slope 65 2 x 1 x 2

×2

Technic, Liftarm Thick 1 x 2 - Axle Hole

×2

Door, Frame 1 x 4 x 6 with 2 Holes on Top and Bottom

Slope 18 2 x 1 x 2/3 with Grille

×2

Panel 1 x 1 x 1 Corner

×6

Tail Shuttle

×2

Technic, Pin Connector Round 2L with Slot (Pin Joiner Round)

×3

Technic, Pin Connector Round 2L with Slot (Pin Joiner Round)

×2

Tile 1 x 3

×2

Technic, Axle and Pin Connector Perpendicular

×4

Technic, Axle Connector 2L (Smooth with x Hole + Orientation)

×8

Technic, Pin 3L with Friction Ridges

×14

Road Sign 2 x 2 Triangle with Open O Clip with Minifigure Worker and 1 Pile Pattern

Plate, Modified 1 x 6 with Train Wagon End / Fence

×2

Technic, Gearbox 4 x 4 x 1 2/3

Technic, Gear 12 Tooth Bevel

×2

Arch 6 x 2 x 5/6 Inverted

×4

Brick, Round 1 x 1 x 2/3 Dome Top

×2

Arch 1 x 3 Inverted

×2

Brick, Modified 2 x 2 x 2/3 Ribbed with Axle Hole

Technic, Brick Modified 1 x 2 with Hole and 1 x 2 Plate

×3

Bracket 3 x 2 x 1 1/3 with Bottom Stud Holder

Bracket 1 x 1 - 1 x 2 Inverted

×2

Technic, Pin 3L without Friction Ridges with Stop

×4

Bracket 1 x 1 - 1 x 2

×2

Bracket 1 x 1 - 1 x 2

×8

Windscreen 3 x 4 x 3

Plate, Round 1 x 1 with Open Stud

×5

Slope 30 1 x 2 x 2/3

×6

Slope 30 1 x 2 x 2/3 with Red, White, and Silver Buttons, Dark Red Screens Pattern

Tile 2 x 4

×4

Tile 2 x 4

Technic, Axle 4L with Stop

×5

Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper)

Cylinder 1 x 5 1/2 with Bar Handle (Friction Cylinder)

×4

Bar 5L with Handle (Friction Ram)

×4

Slope, Curved 2 x 4 x 2/3 with Bottom Tubes with Black Elephant Head Profile with White Eye and Tusk Pattern

Technic, Pin 1/2 with Friction Ridges

×17

Slope 45 2 x 1 with 2/3 Cutout

×2

Arch 1 x 6 Raised Arch

Brick and Axle Separator

Tile, Round 1 x 1

×5

Tile, Round 1 x 1

×3

Tile, Round 1 x 1

×3

Support 2 x 2 x 5 Bar on Tile Base with Hollow Stud and Stop Ring

Minifigure, Utensil Ingot 1 x 2

×2

Bracket 1 x 2 - 1 x 2 Inverted

Bulldozer

About Bulldozer

Part-out value

Minifigures in Bulldozer (3)

Parts (181)

Common questions about Bulldozer

How much is LEGO Bulldozer (60466-1) worth?

What minifigures come in LEGO set 60466-1?

Is it worth parting out LEGO Bulldozer?

Is LEGO Bulldozer (60466-1) retired?

How do I check if my Bulldozer set is complete?

More Town / City sets

Explore more

Company

Legal