How much is LEGO Crawler Crane (7632-1) worth?

Crawler Crane sells for an average of $82.60 used and $217.74 new/sealed on BrickLink based on 6 months of completed sales. As a retired set, prices tend to hold steady or appreciate over time, especially for complete sets with original packaging. Actual prices vary with completeness. Missing minifigures or key parts will lower the value.

What minifigures come in LEGO set 7632-1?

This set includes 2 minifigures: Construction Worker - Orange Zipper, Safety Stripes, Orange Arms, Orange Legs, Dark Bluish Gray Hips, Red Construction Helmet, Silver Sunglasses ($1.41), Plaid Button Shirt, Dark Bluish Gray Legs, Red Construction Helmet, Glasses, Gray Beard ($1.67). The minifigures have a combined BrickLink value of $3.08. Each figure is linked above with individual pricing if you're looking to buy or sell specific characters.

Is it worth parting out LEGO Crawler Crane?

The minifigures make up about 4% of the set value ($3.08 out of $82.60). Most of the value is in the complete set package, so selling it whole is likely the better move unless you have buyers lined up for specific figures.

Is LEGO Crawler Crane (7632-1) retired?

Yes, Crawler Crane was released in 2009 and has been retired from retail for several years. Retired LEGO sets are only available on the secondary market through BrickLink, eBay, or other resale platforms.

How do I check if my Crawler Crane set is complete?

Use the parts list on this page to check every piece and all 2 minifigures. For the minifigures specifically, you can use the brick'em scanner to identify each figure from a photo and confirm it matches what should be in this set. Missing pieces can be individually sourced on BrickLink.

Crawler Crane

7632-1·Town / City·2009·2 minifigs·108 parts

Used Avg

$82.60

New Avg

$217.74

Add to your inventory Scan the minifigs

About Crawler Crane

Crawler Crane (7632-1) is a LEGO Town / City set released in 2009, currently averaging $82.60 used on BrickLink. It comes with 2 minifigures worth a combined $3.08. The set has retired from retail, so secondary market is the only option. The full parts inventory runs 108 pieces.

Parts (108)

Tile, Modified 1 x 2 Grille with Bottom Groove

×14

Tile 1 x 4

Brick, Modified 1 x 2 with Pin

Technic, Link 1 x 16

×3

Plate, Round 2 x 2 with Rounded Bottom (Boat Stud)

×4

Technic, Brick 1 x 10 with Holes

×2

Technic, Axle 1L with Tow Ball

Technic Slope 6 x 1 x 1 2/3

×2

Technic, Pin with Short Friction Ridges

×16

Technic Turntable 56 Tooth Extended Arms, Top

Technic Turntable 56 Tooth Extended Arms, Base

Brick, Modified 1 x 2 with Grille / Fluted Profile

×7

Brick, Modified 2 x 2 with Pins and Axle Hole

Brick 1 x 2

×18

Brick 1 x 4

×5

Chain 21 Links (16-17L)

Door, Frame 1 x 4 x 6 with 4 Holes on Top and Bottom

Plate 2 x 4

×3

Plate 2 x 4

Plate 1 x 2

×4

Plate 1 x 2

×6

Plate 4 x 12

×2

Plate 4 x 4

Plate 4 x 6

×2

Plate 2 x 8

×9

Plate 4 x 8

×2

Hinge 1 x 2 Locking with 2 Fingers and Tow Ball Socket

Panel 1 x 4 x 1

Brick, Modified 1 x 4 with Studs on Side

×8

Tile 2 x 2

×2

Plate, Modified 2 x 3 with Hole

×4

Technic, Liftarm, Modified Bent Thick 1 x 11.5 Double

×2

String Reel 3 x 2 x 3 Drum with Axle Hole

Technic, Brick 1 x 14 with Holes

×4

Technic, Axle Connector with Axle Hole

Technic, Pin 3L with Friction Ridges and Stop Bush

×12

Technic, Axle 2L Notched

×33

Technic, Liftarm, Modified Bent Thick 1 x 7 (4 - 4)

×2

Technic, Liftarm, Modified Bent Thick L-Shape 3 x 5

×4

Technic, Pin Connector Plate 1 x 2 x 1 2/3 with 2 Holes on Top

×2

Technic, Brick 6 x 8 Open Center

×3

Technic, Pin 3L without Friction Ridges

Technic, Liftarm, Modified Crank / Pin 1 x 3 - Axle Holes

Plate 1 x 8

×6

Brick 1 x 3

×4

Technic, Gear 8 Tooth

×2

Technic, Pin without Friction Ridges

×5

Slope 75 2 x 2 x 3 - Hollow Studs

×2

Technic, Axle 4L

×3

Plate 1 x 4

×10

Technic Bush

×3

Slope, Inverted 33 3 x 2 with Flat Bottom Pin and Connections between Studs

×2

Technic, Axle 1L with Pin without Friction Ridges with Round Hole

×4

Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)

×2

Plate 2 x 6

×2

Technic, Brick 1 x 6 with Holes

×3

Minifigure, Utensil Radio (Walkie-Talkie) with Extended Handle

Plate, Round 1 x 1

×2

Plate, Modified 1 x 1 with U Clip Thick (Vertical Grip)

×2

Tile 1 x 8

×2

Technic, Liftarm Thin 1 x 2 - Axle Holes

×8

Technic, Axle and Pin Connector Perpendicular Double Split

Slope, Curved 8 x 2 x 2 with 4 Recessed Studs

×4

Wheel 11mm D. x 8mm with Center Groove, 4 Spokes

×9

Technic Bush 1/2 Smooth

×3

Technic, Pin 1/2 without Friction Ridges

×9

Plate 2 x 16

×4

Technic, Axle 1L with Pin with Friction Ridges

×9

Slope 10 6 x 8

×2

Wedge 4 x 4 x 2/3 Triple Curved

Antenna Small Base with Black Lever (4592 / 4593)

×3

Slope, Curved 2 x 2 x 2/3 with 2 Studs and Curved Sides

×4

Plate, Modified 1 x 2 with Bar Handle on Side - Closed Ends

×5

Panel 1 x 2 x 1

×2

Windscreen 3 x 4 x 4 Inverted

Wedge, Plate 8 x 3 Pentagonal Right

×2

Wedge, Plate 8 x 3 Pentagonal Left

×2

Wedge, Plate 2 x 4

×4

Brick, Modified 1 x 2 with Studs on 2 Sides

Technic, Axle Connector Perpendicular 2 x 5 Bent

×2

Slope 30 1 x 1 x 2/3

×3

Technic, Axle 8L with Stop

×3

Technic, Link Tread Wide with 2 Pin Holes

×62

Technic Tread Sprocket Wheel Small

×4

Window 1 x 4 x 6 with 3 Panes

Glass for Window 1 x 4 x 6

Bar with Light Cover (Bulb) / Bionicle Barraki Eye

×4

Plate, Modified 1 x 2 with 2 U Clips (Horizontal Grip)

×5

Brick, Modified 1 x 1 x 3 with 2 Clips (Vertical Grip) - Solid Stud

×4

Window 1 x 4 x 3 - No Shutter Tabs

×2

Door 1 x 4 x 6 with Stud Handle

Fence 1 x 8 x 2 2/3

Shutter for Window 1 x 2 x 3 with Hinges

×4

Tile, Modified 4 x 4 with Studs on Edge

Tile, Modified 4 x 6 with Studs on Edges

×6

Panel 1 x 1 x 1 Corner

×2

Brick, Modified 2 x 2 with Pin and Axle Hole

×11

Technic, Pin Connector Round 2L with Slot (Pin Joiner Round)

×2

Support 1 x 6 x 5 Girder Rectangular

×10

Support 1 x 6 x 10 Girder Triangular

×4

Technic, Axle and Pin Connector Perpendicular

×4

Technic, Brick 1 x 1 with Hole

×18

Technic, Pin with Friction Ridges and Tow Ball with Round Pin Hole

Tile 1 x 6

×2

Sticker Sheet for Set 7632 - (64947/4539995)

Bionicle 1 x 3 Tooth with Axle Hole (Bohrok Eye)

×2

String, Cord Thin 200cm

Crawler Crane

About Crawler Crane

Part-out value

Seller notes

Minifigures in Crawler Crane (2)

Parts (108)

Common questions about Crawler Crane

How much is LEGO Crawler Crane (7632-1) worth?

What minifigures come in LEGO set 7632-1?

Is it worth parting out LEGO Crawler Crane?

Is LEGO Crawler Crane (7632-1) retired?

How do I check if my Crawler Crane set is complete?

More Town / City sets

Explore more

Company

Legal