How much is LEGO Fire Station Headquarters (77944-1) worth?

Fire Station Headquarters sells for an average of $155.60 new/sealed on BrickLink based on 6 months of completed sales. As a retired set, prices tend to hold steady or appreciate over time, especially for complete sets with original packaging. Actual prices vary with completeness. Missing minifigures or key parts will lower the value.

What minifigures come in LEGO set 77944-1?

This set includes 6 minifigures: Fire - Reflective Stripes with Utility Belt, Red Fire Helmet, Goatee ($1.10), Fire - Reflective Stripes, Dark Tan Suit, Red Fire Helmet, Open Mouth with Nougat Lips and Dirty Face, Breathing Neck Gear with Blue Air Tanks ($2.56), Fire - Female, Reflective Stripes with Utility Belt and Flashlight, Red Fire Helmet ($1.60), Fire - Male, Reflective Stripes, Bright Light Orange Jacket and Legs, White Helmet, Trans-Brown Visor ($2.15), plus 2 more. The minifigures have a combined BrickLink value of $9.99. Each figure is linked above with individual pricing if you're looking to buy or sell specific characters.

Is LEGO Fire Station Headquarters (77944-1) retired?

Yes, Fire Station Headquarters was released in 2021 and has been retired from retail for several years. Retired LEGO sets are only available on the secondary market through BrickLink, eBay, or other resale platforms.

How do I check if my Fire Station Headquarters set is complete?

Use the parts list on this page to check every piece and all 6 minifigures. For the minifigures specifically, you can use the brick'em scanner to identify each figure from a photo and confirm it matches what should be in this set. Missing pieces can be individually sourced on BrickLink.

Fire Station Headquarters

77944-1·Town / City·2021·6 minifigs·307 parts

Used Avg

$155.60

Showing new price

New Avg

$155.60

Add to your inventory Scan the minifigs

About Fire Station Headquarters

Fire Station Headquarters (77944-1) is a LEGO Town / City set from 2021. There isn't enough recent sales data for a reliable price estimate. It includes 6 minifigures.

Minifigures in Fire Station Headquarters (6)

Parts (307)

Tile 6 x 6 with Bottom Tubes, Textured Surface

×2

Plate, Modified 2 x 2 with Pin Hole - Full Cross Support Underneath

Brick, Modified 1 x 2 with Studs on 1 Side

×2

Brick, Modified 1 x 2 with Studs on 1 Side

Plate, Round 6 x 6 with Hole

Bracket 5 x 2 x 1 1/3 with 2 Holes and Bottom Tube

Windscreen 4 x 4 x 4 2/3 with Bar Handle

Wedge 3 x 4 x 2/3 Curved with Cutout

Plate, Modified 1 x 2 with Clip on Side (Horizontal Grip)

×2

Slope, Curved 2 x 1 x 2/3

×4

Slope, Curved 2 x 1 x 2/3

×2

Wedge 4 x 4 Triple Inverted with Connections between 4 Studs

Plate, Modified 1 x 2 with Tow Ball on Side

×2

Brick, Modified 2 x 4 - 1 x 4 with 2 Recessed Studs and Thin Side Arches

×2

Plate, Modified 1 x 2 with Small Tow Ball Socket on Side

Brick 1 x 1 x 3

×5

Tile, Round 2 x 2 with Bottom Stud Holder

×2

Slope, Curved 2 x 2 x 2/3

×8

Slope, Curved 2 x 2 x 2/3 with Bright Light Yellow Fire Flame and Shield Badge Pattern

Road Sign 2 x 2 Square with Open O Clip with 2 Open Windows on Computer Screen Pattern

Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)

×2

Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)

Wedge, Plate A-Shape with 2 Rows of 4 Studs

×4

Technic, Liftarm Thick 1 x 1 (Spacer)

×3

Minifigure, Utensil Radio (Walkie-Talkie) with Detailed Grille

×2

Brick, Modified 1 x 2 x 1 2/3 with Studs on Side

×2

Slide Spiral Pole 32L

Minifigure, Utensil Spiral Pole Attachment with 2 Bent Handles and 3 Inside Ridges

Brick 2 x 2 Corner

×2

Brick 2 x 2 Corner

Minifigure, Weapon Gun, Mini Blaster / Shooter / Fire Nozzle with Tow Ball Socket and Dark Bluish Gray Trigger (23922 / 15392)

×2

Tile, Modified 1 x 2 Grille with Bottom Groove

×6

Tile, Modified 1 x 2 Grille with Bottom Groove

×3

Tile 1 x 4

×5

Tile 1 x 4

×2

Tile 1 x 4

×7

Tile, Modified 1 x 2 with Bar Handle

×2

Tile, Modified 1 x 2 with Bar Handle

Windscreen 3 x 4 x 1 1/3 with 2 Studs on Top

Plate 2 x 12

×2

Minifigure, Visor Standard

×2

Brick 1 x 2 x 5

×13

Brick 1 x 2 x 5

×2

Brick 1 x 16

×5

Brick 1 x 16

Bar 1 x 8 x 2

×2

Plate, Modified 1 x 2 with Long Tow Ball

Brick, Round Tube 1 x 1 d. 90 degrees Elbow Macaroni - No Stud - Type 2 - Axle Hole

Antenna Whip 8H

String Reel 2 x 2 Holder

String Reel 2 x 2 Drum

Plate, Round 2 x 2 with Rounded Bottom (Boat Stud)

×2

Plate, Round 2 x 2 with Rounded Bottom (Boat Stud)

×2

Technic, Pin with Short Friction Ridges

×18

Brick, Modified 1 x 2 with Grille / Fluted Profile

Brick 2 x 4

×5

Brick 2 x 4

×2

Brick 2 x 4

Brick 2 x 3

×2

Brick 2 x 2

×2

Brick 2 x 2

×7

Brick 2 x 2

×2

Brick 1 x 2

×25

Brick 1 x 2

×2

Brick 1 x 2

×2

Brick 1 x 1

×7

Brick 2 x 10

Brick 1 x 6

×6

Brick 1 x 6

Brick 1 x 4

×7

Brick 1 x 4

×2

Brick 1 x 4

×13

Brick 1 x 4

Brick 2 x 2 x 3

×6

Brick 2 x 2 x 3

×16

Minifigure, Utensil Tool Circular Blade Saw

Plate 2 x 4

×2

Plate 2 x 4

×2

Plate 2 x 4

Plate 2 x 3

×2

Plate 2 x 2

×3

Plate 2 x 2

Plate 1 x 2

×3

Plate 1 x 2

×11

Plate 1 x 2

×2

Plate 1 x 2

×2

Plate 1 x 2

×2

Plate 1 x 2

×2

Brick, Modified 1 x 2 with Bar Handle on Side

×2

Brick, Modified 1 x 2 with Open O Clip Thick (Vertical Grip)

Plate 1 x 1

×3

Helicopter Sled Rails 12 x 6

Plate 6 x 12

×5

Plate 4 x 10

Plate 4 x 4

Plate 4 x 6

Plate 2 x 8

×2

Plate 4 x 8

×2

Tile, Modified 2 x 3 with 2 Open O Clips

Plate 6 x 8

×6

Hinge Brick 1 x 2 Locking with 2 Fingers Vertical End

×4

Slope 45 2 x 4

×2

Slope 45 2 x 2 with Dark Blue Sonar Screen Pattern

Slope 45 2 x 1 with Light Aqua Keypad on Medium Azure Background Pattern

Brick, Modified 1 x 4 with Studs on Side

Hinge Cylinder 1 x 3 Locking with 1 Finger and 2 Fingers on Ends, with Hole

×4

Brick, Modified 2 x 4 with Pin on Top and Side Cutouts

Brick, Round 1 x 1

×6

Brick 1 x 2 without Bottom Tube

Tile 2 x 2

×4

Tile 2 x 2

×3

Tile 2 x 2

×2

Tile 2 x 2

×5

Tile 1 x 2

×2

Tile 1 x 2

×2

Tile 1 x 2

×3

Tile 1 x 2

×2

Tile 1 x 2

×18

Tile 1 x 2 with Computer Keyboard Blank Keys Pattern

Tile 1 x 1

×3

Tile 1 x 1

×3

Plate, Modified 2 x 3 with Hole

×2

Technic, Pin 3/4

×3

Technic, Axle and Pin Connector Angled #1

×2

Technic, Axle and Pin Connector Angled #6 - 90 degrees

×2

Plate, Modified 1 x 2 with Door Rail

×5

Plate, Modified 1 x 2 with Door Rail

×24

Technic, Axle 2L Notched

×2

Technic, Brick 1 x 2 with Axle Hole

×3

Technic, Axle 5L

Technic, Axle and Pin Connector Perpendicular 3L with Center Pin Hole

Technic, Liftarm Thick 1 x 15

×2

Brick 1 x 2 x 2 with Inside Stud Holder

×4

Brick 1 x 2 x 2 with Inside Stud Holder

×2

Plate 1 x 8

×2

Plate 1 x 6

×2

Plate 1 x 6

×3

Plate 1 x 6

×2

Technic, Pin without Friction Ridges

×2

Turntable 2 x 2 Plate, Top

×3

Turntable 2 x 2 Plate, Base

×3

Technic, Brick 1 x 2 with Hole

Technic, Brick 1 x 4 with Holes

×20

Technic, Axle 4L

Technic, Axle 6L

Plate 1 x 4

×7

Plate 2 x 6

×4

Door 1 x 3 x 1 Right

×2

Door 1 x 3 x 1 Left

×2

Vehicle, Steering Stand 1 x 2 with Black Steering Wheel

×2

Plate 2 x 10

×2

Minifigure Air Tanks

Minifigure, Utensil Cup

×2

Brick, Round 2 x 2 with Axle Hole

×4

Antenna 4H - Flat Top

Brick, Modified 1 x 1 with 3 Loudspeakers / Space Positioning Rockets

×2

Minifigure, Utensil Axe, Pick End with Molded Red Head Pattern

Plate, Round 2 x 2 with Axle Hole

×2

Plate, Round 2 x 2 with Axle Hole

×2

Brick, Modified 1 x 1 with Headlight

×2

Plate, Round 1 x 1

×11

Plate, Round 1 x 1

×2

Plate, Round 1 x 1

×4

Minifigure, Utensil Seat / Chair 2 x 2

×2

Bar 1 x 4 x 2 with Open Studs

Plate, Modified 1 x 1 with Open O Clip Thick (Vertical Grip)

×4

Tile 1 x 8

×2

Tile 1 x 8

×2

Ladder 1 1/2 x 2 x 2

×2

Ladder 1 1/2 x 2 x 2

Windscreen 2 x 6 x 2

Wedge, Plate 4 x 2 Left

Technic, Axle and Pin Connector Perpendicular 3L with 2 Pin Holes

×2

Brick, Modified 1 x 2 with Channel

×4

Brick, Modified 1 x 14 with Channel

×6

Garage Roller Door Section without Handle

×20

Garage Roller Door End Section with Handle

×2

Technic, Pin 1/2 without Friction Ridges

×2

Plate 2 x 16

×4

Container, Box 2 x 2 x 2

Container, Box 2 x 2 x 2 Door with Slot

Dish 3 x 3 Inverted (Radar)

Hinge Plate 1 x 2 Locking with 1 Finger on End without Bottom Groove

×4

Hinge Plate 1 x 2 Locking with 1 Finger on End without Bottom Groove

×2

Dish 6 x 6 Inverted (Radar) - Solid Studs

Hinge Plate 1 x 2 Locking with 1 Finger on Side without Bottom Groove

×2

Plate 1 x 10

×2

Technic, Pin Connector Perpendicular 2 x 2 Bent

Plate, Modified 1 x 2 with Open O Clip on Top

×2

Plate, Modified 2 x 2 with Wheel Holder

×6

Technic, Axle 3L

×2

Container, Cupboard 2 x 3 x 2 - Hollow Studs

×3

Container, Cupboard 2 x 3 x 2 Door

×3

Cone 1 x 1 with Top Groove

×3

Antenna Small Base with Black Lever (4592 / 4593)

×3

Dish 2 x 2 Inverted (Radar)

Wedge, Plate 3 x 4 with Stud Notches

Panel 1 x 2 x 1 with Rounded Corners

×2

Bar 1L with Clip Mechanical Claw - Cut Edges and Hole on Side

×3

Wedge 3 1/2 x 4 with Stud Notches

Vehicle, Mudguard 4 x 2 1/2 x 1 2/3 with Arch Round

×10

Crane Bucket Lift Basket 2 x 3 x 2 with Locking Hinge Fingers

Wedge 4 x 6 x 2/3 Triple Curved

Vehicle, Base 4 x 12 x 3/4 with 2 x 4 Recessed Center with Smooth Underside

Slope, Inverted 45 6 x 1 Double with 1 x 4 Cutout

×2

Hinge Cylinder 1 x 2 Locking with 1 Finger and Axle Hole on Ends without Slots

×2

Slope 30 1 x 1 x 2/3

×2

Slope 30 1 x 1 x 2/3

×5

Slope 30 1 x 1 x 2/3

×5

Slope 30 1 x 1 x 2/3

×3

Brick, Round 2 x 2 Dome Top

×2

Hinge Cylinder 1 x 3 Locking with 1 Finger and Pin with Squared Hole and Friction Ridges on Ends

Crane Arm Outside, Wide with Pin Hole at Mid-Point

×2

Windscreen 3 x 4 x 1 1/3 Large Glass Surface

Glass for Window 1 x 4 x 6

×5

Panel 1 x 6 x 5

×2

Wheel 11mm D. x 12mm, Hole Notched for Wheels Holder Pin

×10

Hinge Plate 1 x 2 Locking with 2 Fingers on Side

×4

Plate, Modified 1 x 2 with Bar Handle on End

×2

Panel 1 x 4 x 3 with Side Supports - Hollow Studs

×2

Window 1 x 4 x 3 - No Shutter Tabs

Door, Frame 1 x 4 x 6 with 2 Holes on Top and Bottom

×8

Door, Frame 2 x 4 x 6

×8

Door 1 x 4 x 6 with Stud Handle

Slope, Curved 2 x 1 x 1 1/3 with Recessed Stud

×2

Plate, Modified 1 x 4 with Angled Tubes

Brick 1 x 10

×5

Wave Rounded Straight with Bar End (Castle Dragon Flame / Seaweed / Water)

×4

Slope 18 2 x 1 x 2/3 with Grille

×2

Turntable 4 x 4 Square Base, Locking

Plate, Modified 2 x 2 with Wheels Holder Wide and Hole

×2

Minifigure Fire Helmet Breathing Hose

Tile, Round 8 x 8 with 4 Studs in Center

Tile, Modified 4 x 4 with Studs on Edge

×2

Panel 1 x 1 x 1 Corner

×2

Panel 1 x 1 x 1 Corner

×2

Tail Shuttle with Gold '60409' and Fire Logo with Flame and Shield Pattern on Both Sides

Technic, Pin Connector Round 2L with Slot (Pin Joiner Round)

×2

Technic, Pin Connector Round 2L with Slot (Pin Joiner Round)

Tile 1 x 3

×6

Tile 1 x 3

Plate, Modified 1 x 2 with Clip on End (Horizontal Grip)

×2

Support 1 x 6 x 5 Girder Rectangular

×2

Windscreen 1 x 6 x 3

Minifigure, Weapon Lightsaber Hilt Straight

×2

Technic, Pin 3L with Friction Ridges

×2

Tile 1 x 6

×7

Tile 1 x 6

×2

Propeller 4 Blade 5 Diameter with Rounded Ends and Closed Hub

Tile 2 x 6

×2

Brick, Modified 2 x 2 x 2/3 Ribbed with Axle Hole

Slope, Inverted 45 4 x 4 Double with 2 Holes

Sticker Sheet for Set 77944 - (92568/6380435)

Cylinder Half 2 x 4 x 5 with 1 x 2 Cutout

×4

Slope 30 1 x 2 x 2/3

×2

Slope 30 1 x 2 x 2/3

×4

Tile 2 x 4

×2

Tile 2 x 4

×9

Brick, Round 4 x 4 with Hole

Panel 1 x 2 x 2 with Side Supports - Hollow Studs

×2

Plate, Modified 2 x 6 x 2/3 with 4 Studs on Side

×3

Plate, Modified 2 x 6 x 2/3 with 4 Studs on Side

Cylinder 1 x 5 1/2 with Bar Handle (Friction Cylinder)

×2

Bar 5L with Handle (Friction Ram)

×2

Tire 21mm D. x 12mm - Offset Tread Small Wide, Band Around Center of Tread

×10

Brick, Modified 1 x 2 x 5 with Channel

×6

Tile, Modified 3 x 4 with 4 Studs in Center

Plate, Modified 10 x 10 Octagonal with Hole

Plate 16 x 16

×3

Plate 2 x 14

Plate 8 x 16

Dog, Alsatian / German Shepherd with Black Eyes, Nose and Spots Pattern

Propeller 3 Blade 5 Diameter

Slope, Curved 4 x 1 x 2/3 Double

×2

Slope, Curved 4 x 1 x 2/3 Double

×2

Brick and Axle Separator

Tile, Round 1 x 1

×22

Tile, Round 1 x 1

×7

Wedge 6 x 4 x 2/3 Quad Curved

Bracket 1 x 2 - 2 x 2 Inverted

×8

Bracket 1 x 2 - 1 x 2 Inverted

×4

Bracket 1 x 2 - 1 x 2

×2

String with End Tow Ball (63L Overall) with (Same Color) Tow Ball Pattern

Fire Station Headquarters

About Fire Station Headquarters

Minifigures in Fire Station Headquarters (6)

Parts (307)

Common questions about Fire Station Headquarters

How much is LEGO Fire Station Headquarters (77944-1) worth?

What minifigures come in LEGO set 77944-1?

Is LEGO Fire Station Headquarters (77944-1) retired?

How do I check if my Fire Station Headquarters set is complete?

More Town / City sets

Explore more

Company

Legal