How much is LEGO Fawkes, Dumbledore’s Phoenix (76394-1) worth?

Fawkes, Dumbledore’s Phoenix sells for an average of $38.26 used and $75.53 new/sealed on BrickLink based on 6 months of completed sales. As a retired set, prices tend to hold steady or appreciate over time, especially for complete sets with original packaging. Actual prices vary with completeness. Missing minifigures or key parts will lower the value.

What minifigures come in LEGO set 76394-1?

This set includes 1 minifigure: Albus Dumbledore - Dark Orange Robe ($5.30). The minifigures have a combined BrickLink value of $5.30. Each figure is linked above with individual pricing if you're looking to buy or sell specific characters.

Is it worth parting out LEGO Fawkes, Dumbledore’s Phoenix?

The minifigures make up about 14% of the set value ($5.30 out of $38.26). Most of the value is in the complete set package, so selling it whole is likely the better move unless you have buyers lined up for specific figures.

Is LEGO Fawkes, Dumbledore’s Phoenix (76394-1) retired?

Yes, Fawkes, Dumbledore’s Phoenix was released in 2021 and has been retired from retail for several years. Retired LEGO sets are only available on the secondary market through BrickLink, eBay, or other resale platforms.

How do I check if my Fawkes, Dumbledore’s Phoenix set is complete?

Use the parts list on this page to check every piece and all 1 minifigure. For the minifigures specifically, you can use the brick'em scanner to identify each figure from a photo and confirm it matches what should be in this set. Missing pieces can be individually sourced on BrickLink.

Fawkes, Dumbledore’s Phoenix

76394-1·Harry Potter·2021·1 minifig·193 parts

Used Avg

$38.26

New Avg

$75.53

Add to your inventory Scan the minifigs

About Fawkes, Dumbledore’s Phoenix

Fawkes, Dumbledore’s Phoenix (76394-1) is a LEGO Harry Potter set released in 2021, currently averaging $38.26 used on BrickLink. It comes with 1 minifigure worth a combined $5.30. The set has retired from retail, so secondary market is the only option. The full parts inventory runs 193 pieces.

Parts (193)

Plate, Modified 2 x 2 with Pin Hole - Full Cross Support Underneath

×2

Bar Holder with Clip

×6

Technic, Axle 1L with Pin 2L with Friction Ridges

×2

Plate, Modified 1 x 2 with Pin Hole on Top

×4

Slope, Curved 2 x 1 x 2/3

×4

Plate, Modified 1 x 2 with Tow Ball on Side

×2

Plate, Modified 1 x 2 with Small Tow Ball Socket on End

Plate, Modified 1 x 2 with Small Tow Ball Socket on Side

×2

Slope, Curved 2 x 2 x 2/3

×7

Slope, Curved 2 x 2 x 2/3

×2

Plate, Modified 1 x 1 with Tooth Vertical

×6

Plate, Modified 1 x 1 with Tooth Vertical

Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)

×3

Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)

×4

Barb / Claw / Horn / Tooth with Clip, Curved

×2

Arch 1 x 3 x 2 Inverted

×2

Technic, Liftarm Thick 1 x 1 (Spacer)

×3

Tile, Round 2 x 2 with Open Stud

×2

Plate, Modified 1 x 2 with Pin Hole on Bottom

×4

Tile, Modified 2 x 3 Pentagonal

×2

Tile, Modified 1 x 2 Grille with Bottom Groove

×2

Plate 2 x 2 Corner

×6

Slope, Curved 2 x 1 x 2/3 Inverted

×3

Hinge Plate 1 x 4 Swivel (2429 / 2430)

×2

Tile 1 x 4

×4

Tile 1 x 4

×4

Technic, Axle 3L with Stop

×2

Plate 2 x 12

×2

Tile, Round 1 x 1 Quarter

×3

Tile, Round 1 x 1 Quarter

×15

Tile, Round 1 x 1 Quarter

×15

Tile, Round 1 x 1 Quarter

×19

Plate, Modified 1 x 2 with Bar Handle on Side - Free Ends

×2

Plate, Round 1 x 1 with Bar Handle

×8

Plate, Round 2 x 2 with Rounded Bottom (Boat Stud)

×8

Plate, Modified 2 x 4 with Pin Holes

×2

Wedge, Plate 2 x 2 Cut Corner

×4

Technic, Axle 1L with Tow Ball

Technic, Pin with Short Friction Ridges

×11

Tile, Round Corner 2 x 2 Macaroni

×4

Slope 45 2 x 1 with Cutout without Stud

×6

Bracket 1 x 2 - 1 x 4 with Rounded Corners at the Bottom

×2

Bracket 1 x 2 - 1 x 4 with Rounded Corners at the Bottom

Wedge 2 x 1 x 2/3 Right

×3

Wedge 2 x 1 x 2/3 Right

×5

Wedge 2 x 1 x 2/3 Left

×3

Wedge 2 x 1 x 2/3 Left

×5

Brick 2 x 3

×2

Brick 2 x 2

Brick 1 x 2

×2

Brick 1 x 2

×2

Brick 1 x 1

×2

Plate 2 x 4

×3

Plate 2 x 4

×4

Plate 2 x 4

Plate 2 x 3

×2

Plate 2 x 3

×4

Plate 2 x 3

×3

Plate 2 x 2

×3

Plate 2 x 2

Plate 1 x 2

×9

Plate 1 x 2

×2

Plate 1 x 2

×9

Plate 1 x 2

×2

Plate 1 x 2

Plate 1 x 1

×3

Plate 1 x 1

×2

Plate 4 x 4

×2

Plate 4 x 6

Plate 2 x 8

Plate, Round Corner 3 x 3

×4

Wedge, Plate 4 x 4 Cut Corner

×2

Plate, Round Corner 4 x 4

×2

Tile 1 x 2

×2

Tile 1 x 2

×2

Tile 1 x 1

×5

Tile 1 x 1

×11

Technic, Brick 1 x 2 with Holes

×2

Plate, Modified 1 x 2 with Door Rail

×4

Technic, Axle 2L Notched

Technic, Gear Knob Cog Wheel with Axle Hole (+ Orientation)

×4

Technic, Axle 5L

×2

Technic, Liftarm, Modified Bent Thick L-Shape 2 x 4

×3

Technic, Gear 20 Tooth Bevel

Technic, Gear 12 Tooth Double Bevel

Technic, Liftarm Thick 1 x 5

×2

Technic, Liftarm Thick 1 x 3

Technic, Liftarm Thick 1 x 7

×2

Technic, Liftarm Thick 1 x 7

×2

Technic, Pin 3L without Friction Ridges

×2

Slope, Curved 2 x 2 x 2/3 Inverted

Slope 33 2 x 4 Double

×4

Plate, Modified 1 x 3 with 2 Studs (Double Jumper)

×2

Plate 1 x 8

Plate, Round 1 x 2 with Open Studs

×4

Plate, Round 1 x 2 with Open Studs

Plate 1 x 3

×2

Plate 1 x 3

×8

Plate 1 x 3

×2

Plate 1 x 6

×2

Plate 1 x 6

×2

Technic, Pin without Friction Ridges

×9

Minifigure, Utensil Wand, 2 on Sprue

Bracket 1 x 1 - 1 x 1 Inverted

×2

Technic, Brick 1 x 2 with Hole

×5

Technic, Axle 4L

Technic, Axle 8L

Technic, Plate 2 x 4 with 3 Holes

×2

Plate 1 x 4

×4

Plate 1 x 4

×2

Plate 1 x 4

×11

Technic Bush

×3

Plate 2 x 6

Hinge Brick 1 x 2 Base

Plate, Round 1 x 1

×9

Plate, Round 1 x 1

×3

Plate, Round 1 x 1

×3

Plate, Round 1 x 1

×3

Plate, Round 1 x 1

×11

Plate, Modified 1 x 1 with Light Attachment - Thick Ring

×2

Bracket 2 x 2 - 1 x 2 Centered

Wedge, Plate 4 x 2 Right

Wedge, Plate 4 x 2 Left

Technic, Axle and Pin Connector Perpendicular 3L with 2 Pin Holes

×2

Technic Bush 1/2 Smooth

×2

Technic Bush 1/2 Smooth

×4

Technic, Pin 1/2 without Friction Ridges

×17

Slope, Inverted 33 3 x 1

×2

Technic, Axle 1L with Pin with Friction Ridges

×2

Wedge, Plate 3 x 2 Right

×3

Wedge, Plate 3 x 2 Left

×3

Bracket 1 x 2 - 2 x 2

×3

Bracket 1 x 2 - 2 x 2

×8

Technic, Axle 3L

×5

Plate, Modified 1 x 1 with Tooth Horizontal

×2

Plate, Modified 1 x 1 with Tooth Horizontal

×2

Slope, Curved 3 x 1

×6

Brick, Modified 1 x 2 with Studs on 2 Sides

Slope, Inverted 45 6 x 1 Double with 1 x 4 Cutout

Barb / Claw / Horn / Tooth - Small

×3

Slope 30 1 x 1 x 2/3

×5

Slope 30 1 x 1 x 2/3

×3

Wedge, Plate 6 x 3 Right

Wedge, Plate 6 x 3 Left

Plate, Modified 1 x 2 with Bar Handle on End

×2

Plate, Modified 1 x 2 with Bar Handle on End

×2

Technic, Liftarm Thick 1 x 2 - Axle Hole

×2

Plate, Modified 10 x 10 Octagonal with 6 x 6 Open Center

Hinge Brick 2 x 2 Top Plate

Technic, Liftarm, Modified Crank / Pin 1 x 3 - Axle Holes and Squared Pin Hole

×2

Slope, Curved 4 x 1

×2

Technic, Pin Connector Round 2L with Slot (Pin Joiner Round)

×2

Tile 1 x 3

×10

Plate, Modified 1 x 2 with Clip on End (Horizontal Grip)

×12

Technic, Axle and Pin Connector Perpendicular Triple

Wedge 4 x 3 Triple Curved No Studs

Minifigure, Utensil Telescope

Plate, Modified 4 x 4 with 2 x 2 Open Center

Cattle Horn, Short

×7

Technic, Axle and Pin Connector Perpendicular

×2

Technic, Axle Connector 2L (Smooth with x Hole + Orientation)

Brick, Round 2 x 2 D. 45 degrees Elbow (25.5mm Standing Height)

Technic, Gear 12 Tooth Bevel

×4

Tile 1 x 6

×2

Phoenix with Black Beak, Eyes and Stripes, Bright Light Orange Face and Chest Pattern (HP Fawkes)

Wave Rounded Curved Single with Bar End (Flame, Sword)

×3

Bracket 1 x 1 - 1 x 2 Inverted

×2

Brick, Round Corner 5 x 5 with Slope 45 Edge without Studs

×4

Technic, Brick Modified 1 x 2 with Hole and Dual Liftarm Extensions

×2

Slope 30 1 x 2 x 2/3

×5

Tile 2 x 4

Tile 2 x 4 with Gold 'Fawkes' Pattern

Technic, Pin Connector Toggle Joint Smooth Double with Axle and Pin Holes

Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper)

Bar 3L (Bar Arrow)

×2

Brick, Round 2 x 2 with Axle Hole and Grille / Fluted Profile

×6

Slope, Curved 4 x 1 x 2/3 Double

×2

Bracket 1 x 2 - 2 x 4

×2

Tile, Round 1 x 1 with Small White Circle / Eye Pupil Offset Pattern

×3

Bracket 1 x 2 - 2 x 2 Inverted

×2

Bracket 1 x 2 - 2 x 2 Inverted

×5

Bracket 1 x 2 - 1 x 2 Inverted

×6

Fawkes, Dumbledore’s Phoenix

About Fawkes, Dumbledore’s Phoenix

Part-out value

Seller notes

Minifigures in Fawkes, Dumbledore’s Phoenix (1)

Parts (193)

Common questions about Fawkes, Dumbledore’s Phoenix

How much is LEGO Fawkes, Dumbledore’s Phoenix (76394-1) worth?

What minifigures come in LEGO set 76394-1?

Is it worth parting out LEGO Fawkes, Dumbledore’s Phoenix?

Is LEGO Fawkes, Dumbledore’s Phoenix (76394-1) retired?

How do I check if my Fawkes, Dumbledore’s Phoenix set is complete?

More Harry Potter sets

Explore more

Company

Legal