How much is LEGO Hungarian Horntail Dragon (76406-1) worth?

Hungarian Horntail Dragon sells for an average of $44.17 used and $56.05 new/sealed on BrickLink based on 6 months of completed sales. As a retired set, prices tend to hold steady or appreciate over time, especially for complete sets with original packaging. Actual prices vary with completeness. Missing minifigures or key parts will lower the value.

What minifigures come in LEGO set 76406-1?

This set includes 1 minifigure: Harry Potter - Triwizard Uniform, Black Medium Legs ($3.87). The minifigures have a combined BrickLink value of $3.87. Each figure is linked above with individual pricing if you're looking to buy or sell specific characters.

Is it worth parting out LEGO Hungarian Horntail Dragon?

The minifigures make up about 9% of the set value ($3.87 out of $44.17). Most of the value is in the complete set package, so selling it whole is likely the better move unless you have buyers lined up for specific figures.

Is LEGO Hungarian Horntail Dragon (76406-1) retired?

Yes, Hungarian Horntail Dragon was released in 2022 and has been retired from retail for several years. Retired LEGO sets are only available on the secondary market through BrickLink, eBay, or other resale platforms.

How do I check if my Hungarian Horntail Dragon set is complete?

Use the parts list on this page to check every piece and all 1 minifigure. For the minifigures specifically, you can use the brick'em scanner to identify each figure from a photo and confirm it matches what should be in this set. Missing pieces can be individually sourced on BrickLink.

Hungarian Horntail Dragon

76406-1·Harry Potter·2022·1 minifig·190 parts

Used Avg

$44.17

New Avg

$56.05

Add to your inventory Scan the minifigs

About Hungarian Horntail Dragon

Hungarian Horntail Dragon (76406-1) is a LEGO Harry Potter set released in 2022, currently averaging $44.17 used on BrickLink. It comes with 1 minifigure worth a combined $3.87. The set has retired from retail, so secondary market is the only option. The full parts inventory runs 190 pieces.

Parts (190)

Barb / Claw / Horn / Tooth - Large

Bar Holder with Clip

×3

Technic, Axle 1L with Pin 2L with Friction Ridges

×2

Bracket 5 x 2 x 1 1/3 with 2 Holes and Bottom Tube

Plate, Modified 1 x 2 with Pin Hole on Top

×4

Slope, Curved 2 x 1 x 2/3

×4

Slope, Curved 2 x 1 x 2/3

×3

Slope, Curved 4 x 1 Inverted

×4

Wedge 2 x 2 (Slope 45 Corner)

×2

Brick, Modified Facet 4 x 4

×4

Plate, Modified 1 x 2 with Tow Ball on Side

×4

Plate, Modified 1 x 2 with Small Tow Ball Socket on End

×2

Plate, Modified 1 x 2 with Tow Ball and Small Tow Ball Socket on Ends

×3

Plate, Modified 1 x 2 with Small Tow Ball Socket on Side

×3

Slope, Curved 2 x 2 x 2/3

×4

Plate, Modified 1 x 1 with Tooth Vertical

Plate, Modified 1 x 2 with 3 Teeth

×4

Plate, Modified 3 x 3 Cross

×2

Slope 45 2 x 1 Triple with Bottom Stud Holder

×9

Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)

×3

Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)

×3

Tile, Modified 1 x 1 with Open O Clip

×2

Cloth Wing Dragon, Tattered

×2

Arch 1 x 3 x 2 Inverted

×2

Technic, Liftarm Thick 1 x 1 (Spacer)

×7

Plate, Modified 1 x 2 with Pin Hole on Bottom

×4

Tile, Modified 2 x 3 Pentagonal

×6

Tile, Modified 2 x 3 Pentagonal

×2

Tile, Modified 2 x 3 Pentagonal

×2

Bar 1L with Tow Ball

Brick 2 x 2 Corner

×2

Technic, Axle Connector Hub with 2 Bar Holders Perpendicular

×6

Plate 2 x 2 Corner

×8

Slope, Curved 2 x 1 x 2/3 Inverted

×8

Hinge Plate 1 x 4 Swivel (2429 / 2430)

×2

Tile 1 x 4

×3

Technic, Axle 3L with Stop

×4

Egg with Small Pin Hole

Tile, Round 1 x 1 Quarter

×7

Tile, Round 1 x 1 Quarter

×5

Tile, Round 1 x 1 Quarter

×3

Plate, Round 1 x 1 with Bar Handle

×9

Wedge, Plate 2 x 2 Cut Corner

×12

Technic, Axle 1L with Tow Ball

×10

Technic, Pin with Short Friction Ridges

×15

Slope 45 2 x 1 with Cutout without Stud

×2

Wedge 2 x 1 x 2/3 Right

×10

Wedge 2 x 1 x 2/3 Left

×10

Brick 2 x 2

Brick 1 x 2

×2

Brick 1 x 1

×2

Brick 1 x 6

×2

Brick 1 x 6

Brick 1 x 4

Plate 2 x 4

×4

Plate 2 x 4

×5

Plate 2 x 4

×2

Plate 2 x 3

×2

Plate 2 x 3

×5

Plate 2 x 2

×2

Plate 2 x 2

×2

Plate 2 x 2

×7

Plate 2 x 2

×4

Plate 1 x 2

×21

Plate 1 x 1

×4

Plate 4 x 6

Plate 2 x 8

×2

Hinge Plate 1 x 2 Locking with 1 Finger on Top

×2

Hinge Brick 1 x 2 Locking with 2 Fingers Horizontal End

×2

Plate, Round Corner 4 x 4

×2

Tile 1 x 2

×2

Tile 1 x 1

×2

Plate, Modified 2 x 3 with Hole

Technic, Brick 1 x 2 with Holes

×2

Technic, Plate 2 x 6 with 5 Holes

×2

Technic, Axle and Pin Connector Angled #2 - 180 degrees

×2

Technic, Axle 2L Notched

×3

Technic, Gear Knob Cog Wheel with Axle Hole (+ Orientation)

×4

Technic, Axle 5L

×2

Technic, Liftarm, Modified Bent Thick L-Shape 2 x 4

Technic, Gear 20 Tooth Bevel

Technic, Gear 12 Tooth Double Bevel

Technic, Liftarm Thick 1 x 5

×2

Technic, Liftarm Thick 1 x 3

Technic, Liftarm Thick 1 x 7

×4

Technic, Pin 3L without Friction Ridges

×2

Technic, Pin Connector Perpendicular Double 3L

×2

Slope, Curved 2 x 2 x 2/3 Inverted

×6

Slope 33 3 x 2

×3

Plate, Modified 1 x 3 with 2 Studs (Double Jumper)

Plate 1 x 8

Plate, Modified 4 x 4 with 3 x 3 Curved Cutout

×2

Plate, Round 1 x 2 with Open Studs

×6

Plate, Round 1 x 2 with Open Studs

×14

Tile, Modified 2 x 2 Triangular

×2

Brick 1 x 3

×2

Plate 1 x 3

×6

Slope, Inverted 45 2 x 1

×4

Plate 1 x 6

×3

Technic, Pin without Friction Ridges

×9

Minifigure, Utensil Wand, 2 on Sprue

Bracket 1 x 1 - 1 x 1 Inverted

×2

Bracket 1 x 1 - 1 x 1

×2

Technic, Brick 1 x 2 with Hole

×3

Technic, Axle 4L

Plate 1 x 4

×2

Plate 1 x 4

×3

Technic Bush

×3

Minifigure, Utensil Candle

×8

Plate 2 x 6

Plate 2 x 10

×2

Antenna 4H - Flat Top

Plate, Round 2 x 2 with Axle Hole

×2

Dinosaur Tail / Neck Middle Section with Bar Hole and Technic Pin

×2

Brick, Modified 1 x 1 with Headlight

Plate, Round 1 x 1

×7

Plate, Modified 1 x 1 with Light Attachment - Thick Ring

×2

Plate, Modified 1 x 1 with Open O Clip Thick (Vertical Grip)

×10

Bracket 2 x 2 - 1 x 2 Centered

Technic, Axle and Pin Connector Perpendicular 3L with 2 Pin Holes

×2

Bar 12L with 1 x 2 Plate End Solid Studs and 1 x 1 Round Plate End

Technic Bush 1/2 Smooth

×4

Technic, Pin 1/2 without Friction Ridges

×13

Slope, Inverted 33 3 x 1

×2

Technic, Axle 1L with Pin with Friction Ridges

×4

Wedge 4 x 2 Triple Left

Wedge 4 x 2 Triple Right

Hinge Plate 1 x 2 Locking with 1 Finger on End without Bottom Groove

×4

Hinge Plate 1 x 2 Locking with 2 Fingers on End

×4

Hinge Plate 1 x 2 Locking with 2 Fingers on End

Bracket 1 x 2 - 2 x 2

×14

Technic, Axle 3L

×5

Cone 1 x 1 with Top Groove

×6

Brick, Modified 1 x 2 x 2/3 with Studs on Sides and Extended Stud Receptacle

×2

Pneumatic T Piece Second Version (T Bar with Ball in Center)

×2

Brick, Modified 1 x 1 with Studs on 4 Sides

Brick, Modified 1 x 2 with Studs on 2 Sides

×3

Barb / Claw / Horn / Tooth - Small

×27

Barb / Claw / Horn / Tooth - Small

×3

Slope 30 1 x 1 x 2/3

×21

Technic, Axle Connector Hub with 3 Axles

×4

Technic, Brick Modified 2 x 2 with Ball Joint and Axle Hole with 6 Holes in Ball

Technic, Liftarm Thick 1 x 2 - Axle Hole

×2

Plate, Modified 10 x 10 Octagonal with 6 x 6 Open Center

×2

Plate, Modified 1 x 1 with Open O Clip (Horizontal Grip)

Technic, Liftarm, Modified Crank / Pin 1 x 3 - Axle Holes and Squared Pin Hole

×2

Minifigure, Utensil Handcuffs

×2

Technic, Pin Connector Round 2L with Slot (Pin Joiner Round)

×2

Technic, Pin Connector Round 2L with Slot (Pin Joiner Round)

×2

Tile 1 x 3

×2

Plate, Modified 1 x 2 with Clip on End (Horizontal Grip)

×6

Technic, Axle and Pin Connector Perpendicular Triple

Cattle Horn, Short

×7

Wedge 4 x 4 Fractured Polygon Top

Technic, Axle and Pin Connector Perpendicular

×2

Technic, Axle Connector 2L (Smooth with x Hole + Orientation)

×6

Technic, Axle 2L with Reverser Handle Axle Connector

×4

Bar 1L with Angled Hollow Stud

×2

Technic, Gear 12 Tooth Bevel

×4

Technic, Pin with Friction Ridges and Tow Ball with Round Pin Hole

×2

Tile 1 x 6

×2

Technic, Brick Modified 2 x 2 with Ball Socket and Axle Hole - Straight Forks with Round Ends and Closed Sides

Tile 2 x 6

×2

Technic, Axle and Pin Connector Perpendicular Double Split, Reinforced Sides

×2

Sticker Sheet for Set 76406 - (10077587/6338391)

Bar 2L with Stop Ring

×7

Plate, Round 1 x 1 with Open Stud

×2

Plate, Round 1 x 1 with Open Stud

×3

Technic, Brick Modified 1 x 2 with Hole and Dual Liftarm Extensions

×2

Wave Rounded Straight Large with Bar End (Flame) with Marbled Trans-Orange Pattern

Slope 30 1 x 2 x 2/3

×3

Slope 30 1 x 2 x 2/3

×6

Tile 2 x 4

Technic, Pin Connector Toggle Joint Smooth Double with Axle and Pin Holes

Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper)

Barb / Claw / Horn / Tooth - Medium

×13

Minifigure, Utensil Broom Bristles with Stud Holder

Hinge Plate 2 x 2 Locking with 1 Finger on Top

Bracket 1 x 2 - 2 x 4

×4

Wedge 3 x 4 x 2/3 Triple Curved

×2

Bracket 1 x 2 - 2 x 2 Inverted

×7

Bracket 1 x 2 - 1 x 2 Inverted

×7

Bracket 1 x 2 - 1 x 2 Inverted

×2

Bracket 1 x 2 - 1 x 2

×2

Hungarian Horntail Dragon

About Hungarian Horntail Dragon

Part-out value

Minifigures in Hungarian Horntail Dragon (1)

Parts (190)

Common questions about Hungarian Horntail Dragon

How much is LEGO Hungarian Horntail Dragon (76406-1) worth?

What minifigures come in LEGO set 76406-1?

Is it worth parting out LEGO Hungarian Horntail Dragon?

Is LEGO Hungarian Horntail Dragon (76406-1) retired?

How do I check if my Hungarian Horntail Dragon set is complete?

More Harry Potter sets

Explore more

Company

Legal