How much is LEGO Cragger's Fire Striker (70135-1) worth?

Cragger's Fire Striker sells for an average of $28.00 used and $60.00 new/sealed on BrickLink based on 6 months of completed sales. As a retired set, prices tend to hold steady or appreciate over time, especially for complete sets with original packaging. Actual prices vary with completeness. Missing minifigures or key parts will lower the value.

What minifigures come in LEGO set 70135-1?

This set includes 3 minifigures: Stealthor - Heavy Armor ($2.21), Vornon - Trans-Light Blue Armor ($2.51), Cragger - Fire Chi, Light Armor ($2.30). The minifigures have a combined BrickLink value of $7.02. Each figure is linked above with individual pricing if you're looking to buy or sell specific characters.

Is it worth parting out LEGO Cragger's Fire Striker?

The minifigures make up about 25% of the set value ($7.02 out of $28.00). Most of the value is in the complete set package, so selling it whole is likely the better move unless you have buyers lined up for specific figures.

Is LEGO Cragger's Fire Striker (70135-1) retired?

Yes, Cragger's Fire Striker was released in 2014 and has been retired from retail for several years. Retired LEGO sets are only available on the secondary market through BrickLink, eBay, or other resale platforms.

How do I check if my Cragger's Fire Striker set is complete?

Use the parts list on this page to check every piece and all 3 minifigures. For the minifigures specifically, you can use the brick'em scanner to identify each figure from a photo and confirm it matches what should be in this set. Missing pieces can be individually sourced on BrickLink.

Cragger's Fire Striker

70135-1·Legends of Chima·2014·3 minifigs·126 parts

Used Avg

$28.00

New Avg

$60.00

Add to your inventory Scan the minifigs

About Cragger's Fire Striker

Cragger's Fire Striker (70135-1) is a LEGO Legends of Chima set released in 2014, currently averaging $28.00 used on BrickLink. It comes with 3 minifigures worth a combined $7.02. The set has retired from retail, so secondary market is the only option. The full parts inventory runs 126 pieces.

Parts (126)

Plant Leaves 6 x 5 Swordleaf with Open O Clip Thick

×2

Wheel Hard Plastic, Treaded with 7 Pin Holes and 6 Bar Holes

×2

Minifigure, Weapon Sword, Serrated with Bar Holder (Vengious)

×2

Rock 1 x 1 Crystal 4 Point (Brick, Round 1 x 1 with 4 Upward Fins / Points)

×3

Technic, Axle 1L with Pin 2L with Friction Ridges

×3

Hero Factory Weapon Accessory, Flame / Lightning Bolt with Axle Hole with Marbled Trans-Yellow Pattern

×2

Plate, Modified 1 x 2 with Clip on Side (Horizontal Grip)

Slope, Curved 2 x 1 x 2/3

×6

Technic, Liftarm Thin 1 x 5 - Axle Holes

×2

Slope, Curved 4 x 1 Inverted

×2

Paw with Stud on Top, Bar on Side and 3 Bar Holders on Bottom

Plate, Modified 1 x 2 with 3 Teeth

×2

Technic, Pin Connector 3L with 2 Pins and Center Hole

×6

Technic, Axle 5L with Stop

×2

Slope 45 2 x 1 Triple with Bottom Stud Holder

×4

Wave Rounded Straight Bar 4L (Flame) with Marbled Trans-Yellow Pattern

×2

Barb / Claw / Horn / Tooth with Clip, Curved

×2

Barb / Claw / Horn / Tooth with Clip, Curved

×3

Tile, Modified 1 x 2 Grille with Bottom Groove

×13

Bracket 1 x 2 - 1 x 4 with Rounded Corners

×5

Plate 2 x 12

Technic, Pin with Short Friction Ridges

×13

Plate, Modified 2 x 2 with Pin Holes

×3

Minifigure, Utensil Handlebars

Plate 2 x 4

×2

Plate 2 x 3

Plate 2 x 2

×7

Plate 1 x 2

×6

Plate 1 x 1

×5

Plate 4 x 4

Plate 4 x 6

Plate 2 x 8

×2

Bar 4L (Lightsaber Blade / Wand)

Torso Mechanical, Battle Droid

Slope 45 2 x 2

×4

Brick, Round 1 x 1

×3

Technic, Brick 1 x 2 with Holes

×8

Technic, Liftarm, Modified Bent Thick 1 x 11.5 Double

×2

Technic, Axle Connector with Axle Hole

×6

Technic, Pin 3L with Friction Ridges and Stop Bush

×4

Technic, Liftarm, Modified Bent Thin L-Shape 3 x 3

×2

Technic, Liftarm, Modified Bent Thin L-Shape 3 x 3

×4

Technic, Axle 2L Notched

×4

Technic, Axle 5L

Technic, Liftarm, Modified Bent Thick L-Shape 2 x 4

×2

Technic, Axle 5.5L with Stop

×2

Technic, Liftarm Thick 1 x 3

×2

Technic, Liftarm Thick 1 x 11

Technic, Liftarm, Modified Bent Thick L-Shape 3 x 5

×2

Technic, Pin Connector Plate with Hole on Bottom

×2

Technic, Pin Connector Plate 1 x 2 x 1 2/3 with 2 Holes on Top

×3

Technic, Liftarm, Modified Crank / Pin 1 x 3 - Axle Holes

×2

Plate 1 x 6

×2

Technic, Pin without Friction Ridges

×2

Technic, Brick 1 x 2 with Hole

×2

Technic, Brick 1 x 4 with Holes

×4

Technic, Brick 1 x 4 with Holes

×2

Technic, Brick 1 x 16 with Holes

×2

Technic, Axle 4L

×7

Plate 2 x 10

Plate, Round 2 x 2 with Axle Hole

Plate, Modified 1 x 1 with Light Attachment - Thick Ring

×4

Plate, Modified 1 x 1 with Open O Clip Thick (Vertical Grip)

×8

Technic, Liftarm Thin 1 x 2 - Axle Holes

×4

Technic, Axle and Pin Connector Perpendicular Double Split

×4

Vehicle, Mudguard 2 x 4 with Flared Wings

Technic, Axle and Pin Connector Perpendicular 3L with 2 Pin Holes

×4

Wedge 12 x 3 Right

Wedge 12 x 3 Left

Technic Bush 1/2 Smooth

×3

Technic, Pin 1/2 without Friction Ridges

×4

Technic, Axle 1L with Pin with Friction Ridges

×13

Wedge 4 x 2 Triple Left

×2

Wedge 4 x 2 Triple Right

×2

Slope 75 2 x 1 x 3 - Hollow Stud

×2

Technic, Axle 3L

×2

Cone 1 x 1 with Top Groove

×2

Plate, Modified 1 x 2 with Bar Arm Up (Horizontal Arm 5mm)

Wedge 2 x 4 Triple

Engine, Smooth Large, 2 x 2 Thin Top Plate

Plate, Modified 1 x 1 with Tooth Horizontal

×10

Plate, Modified 1 x 1 with Tooth Horizontal

×2

Barb / Claw / Horn / Tooth - Small

×6

Barb / Claw / Horn / Tooth - Small

×2

Wedge, Plate 6 x 3 Right

×2

Wedge, Plate 6 x 3 Left

×2

Ball, Bionicle Zamor Sphere with Marbled Yellow Pattern

×2

Technic, Axle 8L with Stop

×4

Technic, Axle Connector Hub with 3 Axles

×2

Plate, Modified 1 x 2 with Bar Handle on End

×2

Technic, Liftarm Thick 1 x 2 - Axle Hole

×2

Technic, Liftarm, Modified T-Shape Thick 3 x 3

×2

Plate, Modified 1 x 4 with Angled Tubes

Wave Rounded Straight with Bar End (Castle Dragon Flame / Seaweed / Water)

×2

Plate, Modified 1 x 2 with Angular Extension with Molded Flexible Rubber Orange Tip Pattern

×3

Slope 18 2 x 1 x 2/3 with Grille

×4

Slope, Curved 4 x 1

×8

Technic, Pin Connector Round 2L with Slot (Pin Joiner Round)

Wheel Hard Plastic with Small Cleats and Flanges

×2

Wedge 4 x 4 Fractured Polygon Top

×3

Technic, Axle Connector 2L (Smooth with x Hole + Orientation)

×4

Technic, Pin 3L with Friction Ridges

×6

Technic, Liftarm, Modified Bent Thick 1 x 9 (6 - 4)

×2

Sticker Sheet for Set 70135 - Transparent Background Version - (17725/6075224)

Wave Rounded Straight Large with Bar End (Flame) with Marbled Trans-Yellow Pattern

×2

Slope 30 1 x 2 x 2/3

×3

Technic, Axle 4L with Stop

Barb / Claw / Horn / Tooth - Medium

×13

Barb / Claw / Horn / Tooth - Medium

×3

Barb / Claw / Horn / Tooth - Medium

×2

Plate, Modified 1 x 2 with Pin Hole and Bucket (Catapult)

Bar 1L with Top Stud and 2 Side Studs (Connector Perpendicular)

Slope, Curved 4 x 1 x 2/3 Double

Slope, Curved 4 x 2

Tile, Round 1 x 1

×2

Tile, Round 1 x 1

×3

Tile, Round 1 x 1 with Gold Flames Pattern

×2

Projectile Launcher Part, Hero Factory Zamor Sphere Launcher - Bottom Half with Axle Hole 1 x 7

×4

Technic, Axle Connector Block Round with 2 Pin Holes and 3 Axle Holes (Hero Factory Weapon Barrel)

×2

Bracket 1 x 2 - 2 x 2 Inverted

×4

Technic, Liftarm, Modified Triangle Thin 3 x 5 with Short Supports

×2

Bracket 1 x 2 - 1 x 2

Bionicle 1 x 3 Tooth with Axle Hole (Bohrok Eye)

×2

Cragger's Fire Striker

About Cragger's Fire Striker

Part-out value

Seller notes

Minifigures in Cragger's Fire Striker (3)

Parts (126)

Common questions about Cragger's Fire Striker

How much is LEGO Cragger's Fire Striker (70135-1) worth?

What minifigures come in LEGO set 70135-1?

Is it worth parting out LEGO Cragger's Fire Striker?

Is LEGO Cragger's Fire Striker (70135-1) retired?

How do I check if my Cragger's Fire Striker set is complete?

More Legends of Chima sets

Explore more

Company

Legal