How much is LEGO Sir Fangar's Saber Tooth Walker (70143-1) worth?

Sir Fangar's Saber Tooth Walker sells for an average of $29.20 used and $46.37 new/sealed on BrickLink based on 6 months of completed sales. As a retired set, prices tend to hold steady or appreciate over time, especially for complete sets with original packaging. Actual prices vary with completeness. Missing minifigures or key parts will lower the value.

What minifigures come in LEGO set 70143-1?

This set includes 3 minifigures: Stealthor ($2.46), Sir Fangar - Heavy Armor, Cape ($5.13), Gorzan - Fire Chi ($1.90). The minifigures have a combined BrickLink value of $9.49. Each figure is linked above with individual pricing if you're looking to buy or sell specific characters.

Is it worth parting out LEGO Sir Fangar's Saber Tooth Walker?

The minifigures make up about 33% of the set value ($9.49 out of $29.20). Most of the value is in the complete set package, so selling it whole is likely the better move unless you have buyers lined up for specific figures.

Is LEGO Sir Fangar's Saber Tooth Walker (70143-1) retired?

Yes, Sir Fangar's Saber Tooth Walker was released in 2014 and has been retired from retail for several years. Retired LEGO sets are only available on the secondary market through BrickLink, eBay, or other resale platforms.

How do I check if my Sir Fangar's Saber Tooth Walker set is complete?

Use the parts list on this page to check every piece and all 3 minifigures. For the minifigures specifically, you can use the brick'em scanner to identify each figure from a photo and confirm it matches what should be in this set. Missing pieces can be individually sourced on BrickLink.

Sir Fangar's Saber Tooth Walker

70143-1·Legends of Chima·2014·3 minifigs·132 parts

Used Avg

$29.20

New Avg

$46.37

Add to your inventory Scan the minifigs

About Sir Fangar's Saber Tooth Walker

Sir Fangar's Saber Tooth Walker (70143-1) is a LEGO Legends of Chima set released in 2014, currently averaging $29.20 used on BrickLink. It comes with 3 minifigures worth a combined $9.49. The set has retired from retail, so secondary market is the only option. The full parts inventory runs 132 pieces.

Parts (132)

Barb / Claw / Horn / Tooth - Large

×5

Bar Holder with Clip

×2

Rock 1 x 1 Crystal 4 Point (Brick, Round 1 x 1 with 4 Upward Fins / Points)

Technic, Axle Connector 2 x 3 Quadruple

×2

Plate, Modified 1 x 2 with Pin Hole on Top

Plate, Modified 1 x 2 with Clip on Side (Horizontal Grip)

×2

Slope, Curved 2 x 1 x 2/3

Slope, Curved 4 x 1 Inverted

×4

Wedge 2 x 2 (Slope 45 Corner)

×2

Wheel 18mm D. x 8mm with Fake Bolts and Deep Spokes with Inner Ring

×3

Slope, Curved 2 x 2 x 2/3

×2

Paw with Stud on Top, Bar on Side and 3 Bar Holders on Bottom

Rock Panel 2 x 4 x 3 with Fractures (Chima Ice Cage)

Hero Factory Foot with Four Short Claws and Ball Joint Socket

×4

Wave Rounded Straight Bar 4L (Flame) with Marbled Trans-Yellow Pattern

Barb / Claw / Horn / Tooth with Clip, Curved

×6

Plate 2 x 2 Corner

×6

Wedge, Plate 3 x 3 Cut Corner

×2

Wedge, Plate 3 x 3 Cut Corner

×8

Plate, Modified 1 x 2 with Bar Handle on Side - Free Ends

×3

Plate, Round 2 x 2 with Rounded Bottom (Boat Stud)

×4

Technic, Pin with Short Friction Ridges

×5

Brick 2 x 4

×3

Brick 2 x 2

Minifigure, Utensil Handlebars

Brick, Modified 1 x 2 with Log Profile

×2

Rock 1 x 1 Jewel 24 Facet

×7

Plate 2 x 4

×7

Plate 2 x 4

Plate 2 x 2

×5

Plate 1 x 2

×6

Plate 1 x 2

×4

Plate 1 x 2

×3

Plate 1 x 1

×3

Plate 2 x 8

Slope 45 2 x 1

×2

Brick, Modified 1 x 4 with Studs on Side

×3

Slope, Curved 2 x 2 Lip

×4

Technic, Brick 1 x 2 with Holes

×3

Technic, Axle Connector with Axle Hole

×4

Technic, Axle 2L Notched

×7

Technic, Brick 1 x 2 with Axle Hole

Technic, Axle and Pin Connector Perpendicular 3L with Center Pin Hole

Technic, Axle and Pin Connector Angled #4 - 135 degrees

Technic, Gear 20 Tooth Double Bevel

×2

Technic, Gear 12 Tooth Double Bevel

Technic, Liftarm, Modified Bent Thick 1 x 7 (4 - 4)

×4

Technic, Liftarm Thick 1 x 11

×2

Slope, Inverted 45 2 x 2 with Flat Bottom Pin

Plate 1 x 6

×11

Technic, Pin without Friction Ridges

×3

Technic, Brick 1 x 4 with Holes

×2

Technic, Brick 1 x 16 with Holes

×2

Technic, Axle 8L

Plate 1 x 4

×6

Technic Bush

×3

Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper)

×2

Plate 2 x 6

×4

Plate 2 x 6

Hinge Brick 1 x 2 Base

×2

Hinge Brick 1 x 2 Top Plate

Dish 8 x 8 Inverted (Radar) - Solid Studs

×2

Plate, Round 2 x 2 with Axle Hole

×8

Plate, Round 1 x 1

×3

Plate, Round 1 x 1

×15

Plate, Modified 1 x 1 with Open O Clip Thick (Vertical Grip)

×8

Wedge 6 x 2 Right

Wedge 6 x 2 Left

Slope, Curved 6 x 1 with 2 Studs

×6

Slope, Curved 6 x 1 with 2 Studs

×2

Technic Bush 1/2 Smooth

×11

Technic, Pin 1/2 without Friction Ridges

×7

Technic, Axle 1L with Pin with Friction Ridges

×8

Wedge, Plate 3 x 2 Right

×3

Wedge, Plate 3 x 2 Left

×3

Bracket 1 x 2 - 2 x 2

×8

Technic, Axle 3L

×7

Cone 1 x 1 with Top Groove

Brick, Modified 1 x 1 with Studs on 4 Sides

×2

Technic Rotation Joint Ball Loop with 2 Perpendicular Pins with Friction

×4

Slope, Curved 3 x 2 x 2/3 with 2 Studs, Wing End

×4

Technic, Brick Modified 2 x 2 with Pin Hole and Rotation Joint Socket

×4

Technic, Brick Modified 2 x 2 with Pin Hole and Rotation Joint Ball Half Horizontal

×4

Wedge 4 x 4 Triple Inverted with Connections between 2 Studs

Plate, Modified 1 x 1 with Tooth Horizontal

×2

Plate, Modified 1 x 1 with Tooth Horizontal

×2

Technic, Liftarm, Modified Ball Joint Angled 1 x 2

×4

Slope, Curved 3 x 1

×2

Barb / Claw / Horn / Tooth - Small

×5

Barb / Claw / Horn / Tooth - Small

×10

Technic Ball Joint with Through Axle Hole

×2

Slope 30 1 x 1 x 2/3

×3

Slope 30 1 x 1 x 2/3

×5

Plate, Round Corner 6 x 6

Brick, Modified 1 x 1 with Open O Clip (Vertical Grip) - Hollow Stud

×2

Plate, Modified 1 x 2 with Bar Handle on End

×2

Technic, Liftarm Thick 1 x 2 - Axle Hole

×2

Slope, Curved 2 x 1 x 1 1/3 with Recessed Stud

×2

Technic, Pin 1/2 with 2L Bar Extension (Flick Missile)

×4

Tire 24mm D. x 7mm Offset Tread - Band Around Center of Tread

×3

Hinge Brick 2 x 2 Top Plate

Slope 18 2 x 1 x 2/3 with Grille

×2

Slope, Curved 4 x 1

Brick, Modified 2 x 2 with Pin and Axle Hole

×2

Plate, Modified 1 x 2 with Clip on End (Horizontal Grip)

Minifigure, Weapon Lightsaber Hilt Straight

×2

Minifigure, Weapon Lightsaber Hilt Straight

×2

Technic, Axle Connector 2L (Smooth with x Hole + Orientation)

×2

Technic, Brick 1 x 1 with Hole

×2

Technic, Pin 3L with Friction Ridges

×3

Technic, Axle 3L with Stud

×2

Sticker Sheet for Set 70143 - (17704/6075178)

Plate, Modified 2 x 2 with Bar Frame Octagonal, Reinforced, Completely Round Studs

×2

Technic, Axle 4L with Stop

×2

Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper)

Barb / Claw / Horn / Tooth - Medium

×3

Technic, Brick Modified 2 x 2 with Ball Socket and Axle Hole - Straight Forks with Round Ends and Open Sides

×2

Hero Factory Weapon, Claw with Clip

×11

Slope 45 2 x 1 with 2/3 Cutout

×2

Slope, Curved 4 x 2

Tile, Round 1 x 1

×3

Tile, Round 1 x 1 with Gold Flames Pattern

Hinge Plate 2 x 4 with Pin Hole and 3 Holes - Top

Minifigure, Utensil Handlebars with Angular Handles

Technic, Axle Connector Block Round with 2 Pin Holes and 3 Axle Holes (Hero Factory Weapon Barrel)

×2

Plate, Modified 2 x 2 x 2/3 with 2 Studs on Side

×4

Bracket 1 x 2 - 2 x 2 Inverted

×8

Bracket 1 x 2 - 1 x 2 Inverted

×2

Bracket 1 x 2 - 1 x 2

×2

Sir Fangar's Saber Tooth Walker

About Sir Fangar's Saber Tooth Walker

Part-out value

Seller notes

Minifigures in Sir Fangar's Saber Tooth Walker (3)

Parts (132)

Common questions about Sir Fangar's Saber Tooth Walker

How much is LEGO Sir Fangar's Saber Tooth Walker (70143-1) worth?

What minifigures come in LEGO set 70143-1?

Is it worth parting out LEGO Sir Fangar's Saber Tooth Walker?

Is LEGO Sir Fangar's Saber Tooth Walker (70143-1) retired?

How do I check if my Sir Fangar's Saber Tooth Walker set is complete?

More Legends of Chima sets

Explore more

Company

Legal