How much is LEGO The Fortrex (70317-1) worth?

The Fortrex sells for an average of $89.47 used and $215.59 new/sealed on BrickLink based on 6 months of completed sales. As a retired set, prices tend to hold steady or appreciate over time, especially for complete sets with original packaging. Actual prices vary with completeness. Missing minifigures or key parts will lower the value.

What minifigures come in LEGO set 70317-1?

This set includes 7 minifigures: Ash Attacker - Orange Horns ($3.04), Axl - Flat Silver Visor and Torso ($4.36), Chef Éclair ($2.15), Clay Moorington - Dark Blue Helmet, Flat Silver Visor and Armor ($2.98), plus 3 more. The minifigures have a combined BrickLink value of $22.43. Each figure is linked above with individual pricing if you're looking to buy or sell specific characters.

Is it worth parting out LEGO The Fortrex?

The minifigures make up about 25% of the set value ($22.43 out of $89.47). Most of the value is in the complete set package, so selling it whole is likely the better move unless you have buyers lined up for specific figures.

Is LEGO The Fortrex (70317-1) retired?

Yes, The Fortrex was released in 2016 and has been retired from retail for several years. Retired LEGO sets are only available on the secondary market through BrickLink, eBay, or other resale platforms.

How do I check if my The Fortrex set is complete?

Use the parts list on this page to check every piece and all 7 minifigures. For the minifigures specifically, you can use the brick'em scanner to identify each figure from a photo and confirm it matches what should be in this set. Missing pieces can be individually sourced on BrickLink.

The Fortrex

70317-1·Nexo Knights·2016·7 minifigs·319 parts

Used Avg

$89.47

New Avg

$215.59

Add to your inventory Scan the minifigs

About The Fortrex

The Fortrex (70317-1) is a LEGO Nexo Knights set released in 2016, currently averaging $89.47 used on BrickLink. It comes with 7 minifigures worth a combined $22.43. The set has retired from retail, so secondary market is the only option. The full parts inventory runs 319 pieces.

Parts (319)

Technic, Axle and Pin Connector Hub with 2 Perpendicular Axles

Technic, Gear 8 Tooth with Dual Face

×2

Brick, Modified 1 x 2 with Studs on 1 Side

×4

Plate, Round 6 x 6 with Hole

×2

Bracket 5 x 2 x 1 1/3 with 2 Holes and Bottom Tube

×2

Plate, Modified 1 x 2 with Clip on Side (Horizontal Grip)

×2

Plate, Modified 1 x 2 with Clip on Side (Horizontal Grip)

Slope, Curved 2 x 1 x 2/3

×2

Slope, Curved 2 x 1 x 2/3

×2

Plate, Round 4 x 4 with 2 x 2 Round Open Center

Minifigure, Weapon Space Ray Gun - Rounded Heat Diffusers

×2

Tile, Round 2 x 2 with Bottom Stud Holder

Tile, Round 2 x 2 with Bottom Stud Holder with Orange and Yellow Cross Pattern

×3

Tile, Round 2 x 2 with Bottom Stud Holder with Globlin Face with Large Teeth Pattern

×2

Tile, Round 2 x 2 with Bottom Stud Holder with Globlin Face with Small Teeth Pattern

Appendage Bony Small with Bar End (Leg / Rib / Tail)

×2

Slope, Curved 2 x 2 x 2/3

×4

Slope, Curved 2 x 2 x 2/3

Plate, Modified 2 x 2 with Pins on Bottom

Minifigure, Weapon Gun, Mini Blaster / Shooter

×2

Projectile Launcher Part, Trigger for Gun, Mini Blaster / Shooter

×5

Technic, Panel Plate 3 x 11 x 1

×2

Technic, Axle 5L with Stop

×4

Tile, Round 2 x 2 with Hole

×3

Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)

×3

Tile, Modified 1 x 1 with Open O Clip

×9

Projectile Launcher, 1 x 4 with Inside Clips (Disk Shooter)

Projectile Launcher Part, Rapid Shooter Trigger Small

×2

Projectile Launcher Part, Rapid Shooter Six Barrel - Angled Barrels

×2

Technic, Axle 2L with Pin with Friction Ridges

×6

Technic, Liftarm Thick 1 x 1 (Spacer)

×2

Bracket 3 x 2 x 1 1/3 with Bottom Tube

×3

Tile, Round 2 x 2 with Open Stud

Tile, Modified 2 x 3 Pentagonal

×4

Tile, Modified 2 x 3 Pentagonal

Tile, Modified 2 x 3 Pentagonal with Nexo Power Shield Pattern - Chicken Power

Tile, Modified 2 x 3 Pentagonal with Nexo Power Shield Pattern - Super Human Speed

Tile, Modified 2 x 3 Pentagonal with Nexo Power Shield Pattern - Hawk Holler

Tile, Modified 2 x 3 Pentagonal with Nexo Power Shield Pattern - Ground Pound

Tile, Modified 2 x 3 Pentagonal with Nexo Power Shield Pattern - Charging Attack

Panel 2 x 6 x 6 with Window Slot

×4

Slope 45 1 x 1 x 2/3 Quadruple Convex Pyramid

×9

Slope 45 1 x 1 x 2/3 Quadruple Convex Pyramid

×11

Wedge 4 x 4 Pointed

×2

Minifigure, Weapon Axe Head with Bar

×2

Minifigure, Shield Pentagonal with Grooved Edges

×3

Bar 1L with Tow Ball

Minifigure, Weapon Gun, Mini Blaster / Shooter for Bar Arrows

Panel 1 x 6 x 5 with Corrugated Profile

×4

Brick 2 x 2 Corner

×4

Minifigure, Weapon Sword, Blade with Bar End

Minifigure, Weapon Blade with Bars and 5 Spikes

Minifigure, Utensil Book Cover with Gold Circle with Spikes, Tan Chevron, Dark Purple Highlights Pattern (Nexo Knights Book of Evil)

Minifigure, Weapon Sword, Long with Molded Flexible Rubber Flat Silver Tip and Angular Crossguard Pattern

Tile, Modified 1 x 2 Grille with Bottom Groove

×5

Tile, Modified 1 x 2 Grille with Bottom Groove

×9

Wedge, Plate 3 x 6 Cut Corners

×2

Plate 2 x 2 Corner

×2

Hinge Plate 1 x 4 Swivel (2429 / 2430)

×4

Tile 1 x 4

×2

Tile, Modified 1 x 2 with Bar Handle

×2

Tile, Modified 1 x 2 with Bar Handle

Minifigure, Utensil Book Binding with 2 Studs

Technic, Link Tread Attachment, Single, Rubber

×66

Plate 2 x 12

Slope, Inverted 75 2 x 1 x 3

×4

Wedge, Plate 3 x 3 Cut Corner

×8

Brick 1 x 1 x 5 - Solid Stud

×2

Brick 1 x 2 x 5

×2

Brick 1 x 2 x 5

×4

Tile, Modified 2 x 2 with Pin

Brick, Modified Facet 3 x 3

×8

Plate, Modified 1 x 2 with Bar Handle on Side - Free Ends

×14

Antenna Whip 8H

×4

Plate, Round 2 x 2 with Rounded Bottom (Boat Stud)

×14

Technic, Disk 3 x 3

Technic, Brick 1 x 10 with Holes

×2

Technic, Pin with Short Friction Ridges

×21

Plate, Modified 2 x 2 with Pin Holes

Brick, Modified 1 x 2 with Grille / Fluted Profile

Brick 2 x 4

×2

Brick 2 x 2

×2

Brick 2 x 2

×4

Brick 1 x 2

×6

Brick 1 x 6

×2

Brick 1 x 4

×2

Chain 21 Links (16-17L)

×2

Brick, Modified 1 x 4 with Log Profile

×2

Slope 45 10 x 2 x 2 Double

Plate 2 x 4

×6

Plate 2 x 3

×6

Plate 2 x 3

×2

Plate 2 x 2

×4

Plate 2 x 2

×5

Plate 1 x 2

×18

Plate 1 x 2

×8

Plate 1 x 2

×2

Brick, Modified 1 x 2 with Bar Handle on Side

×4

Brick, Modified 1 x 2 with Open O Clip Thick (Vertical Grip)

×2

Plate 6 x 12

Plate 4 x 12

Flag 7 x 3 with Bar Handle

×2

Flag 7 x 3 with Bar Handle with Merlok Hologram Pattern

Plate 4 x 4

×4

Plate 4 x 6

Plate 2 x 8

×4

Plate 2 x 8

×2

Plate 4 x 8

×2

Tile, Modified 2 x 3 with 2 Open O Clips

×2

Bar 4L (Lightsaber Blade / Wand)

×4

Slope 45 2 x 1

×2

Slope 45 2 x 1

×4

Slope 45 2 x 1

×8

Brick, Modified 1 x 4 with Studs on Side

×2

Wedge, Plate 4 x 4 Cut Corner

×2

Brick, Modified 1 x 2 with Pins

×2

Hinge Brick 1 x 2 Locking with 2 Fingers Horizontal End

×2

Hinge Brick 1 x 2 Locking with 2 Fingers Horizontal End

×2

Hinge Brick 1 x 2 Locking with 1 Finger Horizontal End

×4

Hinge Cylinder 1 x 2 Locking with 2 Fingers and Axle Hole on Ends with Slots

Brick, Round 1 x 1

×8

Brick, Round 1 x 1

×2

Brick 1 x 2 without Bottom Tube

Tile 2 x 2

×4

Tile 1 x 2

×4

Tile 1 x 2

×2

Tile 1 x 2 with Dark Tan Markings and Black Monster Head with Yellow Eye and Orange Horn Pattern (Nexo Knights Book of Evil)

Tile 1 x 1 with Chef Jacket Pattern

Tile 1 x 1 with Black Cross and Dark Red and Dark Bluish Gray Buttons Pattern

×2

Technic, Axle and Pin Connector Angled #1

×5

Technic, Axle and Pin Connector Angled #5 - 112.5 degrees

×2

Technic, Brick 1 x 14 with Holes

×2

Technic, Axle Connector with Axle Hole

×5

Technic, Pin 3L with Friction Ridges and Stop Bush

×4

Wedge, Plate 4 x 6 Cut Corners

×2

Technic, Axle 2L Notched

×4

Technic, Brick 1 x 2 with Axle Hole

×2

Technic, Brick 1 x 2 with Axle Hole

×2

Technic, Axle 5L

×2

Technic, Axle and Pin Connector Perpendicular 3L with Center Pin Hole

×2

Technic Driving Ring Extension

×4

Technic, Axle 5.5L with Stop

×6

Technic, Gear 12 Tooth Double Bevel

Technic, Liftarm Thick 1 x 15

×2

Technic, Liftarm Thick 1 x 3

×6

Technic, Liftarm Thick 1 x 7

×4

Slope 33 3 x 2

×2

Turkey Drumstick, 20mm with Round Opening on Back

Plate 1 x 8

×2

Brick 1 x 3

×6

Brick 1 x 3

×2

Minifigure, Head Dual Sided Alien Robot with Yellow Eyes, Mask with Metal Bolts, Closed Mouth / Open Mouth Pattern

Slope, Inverted 45 2 x 2 with Flat Bottom Pin

×2

Slope, Inverted 45 2 x 2 with Flat Bottom Pin

×2

Slope, Inverted 45 2 x 1

×6

Plate 1 x 6

×2

Plate 1 x 6

×2

Technic, Pin without Friction Ridges

×3

Turntable 2 x 2 Plate, Top

×2

Turntable 2 x 2 Plate, Base

×2

Technic, Brick 1 x 2 with Hole

×2

Technic, Brick 1 x 4 with Holes

×6

Technic, Brick 1 x 8 with Holes

×2

Technic, Axle 4L

×5

Technic, Axle 6L

×2

Technic, Axle 8L

Technic, Plate 2 x 4 with 3 Holes

Plate 1 x 4

×3

Plate 1 x 4

Technic Bush

×10

Technic Bush

×14

Slope, Inverted 33 3 x 2 with Flat Bottom Pin and Connections between Studs

×2

Technic, Axle 1L with Pin without Friction Ridges with Round Hole

×2

Plate 2 x 6

Vehicle, Steering Stand 1 x 2 with Black Steering Wheel

Plate 2 x 10

×2

Technic, Brick 1 x 6 with Holes

×2

Minifigure, Utensil Cup

Minifigure, Utensil Signal Paddle

Brick, Round 2 x 2 with Axle Hole

×2

Brick, Round 2 x 2 with Axle Hole

×8

Bracket 2 x 2 - 2 x 2 with 2 Holes

Technic, Steering Wheel Pilot's Yoke

×2

Minifigure, Utensil Tool Spanner Wrench / Screwdriver

Plate, Round 2 x 2 with Axle Hole

×25

Brick, Modified 1 x 1 with Headlight

×4

Plate, Round 1 x 1

×30

Plate, Round 1 x 1

×37

Plate, Modified 1 x 1 with Light Attachment - Thick Ring

×4

Bar 1 x 4 x 2 with Open Studs

Plate, Modified 1 x 1 with Open O Clip Thick (Vertical Grip)

×4

Technic, Liftarm Thick 1 x 13

×2

Tile 1 x 8

×4

Tile 1 x 8

×4

Ladder 1 1/2 x 2 x 2

×2

Vehicle, Mudguard 2 x 4 with Flared Wings

Plate, Modified 2 x 2 with Vents

×2

Technic, Axle and Pin Connector Perpendicular 3L with 2 Pin Holes

×2

Wheel 11mm D. x 8mm with Center Groove, 4 Spokes

×2

Technic Bush 1/2 Smooth

×14

Technic, Pin 1/2 without Friction Ridges

×13

Technic, Pin 1/2 without Friction Ridges

×5

Plate 2 x 16

×6

Plate 2 x 16

×3

Slope 33 3 x 1

×4

Slope, Inverted 33 3 x 1

×2

Technic, Axle 1L with Pin with Friction Ridges

×9

Container, Box 2 x 2 x 2

×2

Container, Box 2 x 2 x 2

Container, Box 2 x 2 x 2 Door with Slot

×2

Wedge, Plate 4 x 4

×2

Technic, Liftarm Thick 1 x 2

×2

Flag 2 x 2 Trapezoid

×2

Bracket 1 x 2 - 2 x 2

×4

Minifigure, Utensil Tool Mallet / Hammer

Minifigure, Utensil Frying Pan

Brick, Round 1 x 1 with Fins

Cone 1 x 1 with Top Groove

×7

Cone 1 x 1 with Top Groove

×2

Plate, Modified 1 x 4 Offset

Bracket 3 x 2 - 2 x 2 Inverted (Space Seat)

×4

Tap 1 x 1 without Hole in Nozzle End

×2

Tap 1 x 1 without Hole in Nozzle End

×2

Plate, Modified 1 x 2 with Bar Arm Up (Horizontal Arm 5mm)

×3

Dish 2 x 2 Inverted (Radar)

×2

Slope, Curved 2 x 2 x 2/3 with 2 Studs and Curved Sides

×2

Slope, Curved 2 x 2 x 2/3 with 2 Studs and Curved Sides

×4

Slope, Curved 2 x 2 x 2/3 with 2 Studs and Curved Sides

Plate, Modified 1 x 2 with Bar Handle on Side - Closed Ends

Panel 1 x 2 x 1 with Rounded Corners

×8

Bar 1L with Clip Mechanical Claw - Cut Edges and Hole on Side

Barb / Claw / Horn / Tooth - Small

×3

Barb / Claw / Horn / Tooth - Small

×3

Barb / Claw / Horn / Tooth - Small

×2

Slope 30 1 x 1 x 2/3

×6

Slope 30 1 x 1 x 2/3

×3

Slope 30 1 x 1 x 2/3

×5

Slope 30 1 x 1 x 2/3

×3

Technic, Axle 8L with Stop

Projectile Arrow, Liftarm Shaft with Molded Black Flexible Rubber Hollow End Pattern

Projectile Launcher, Cannon, Flat Bottom

Technic, Link Tread Wide with 2 Pin Holes

×64

Technic Tread Sprocket Wheel Small

×10

Panel 1 x 6 x 5

×2

Plate, Modified 1 x 2 with 2 Open O Clips (Horizontal Grip)

Slope 18 4 x 1

×2

Slope 65 2 x 1 x 2

×8

Technic, Liftarm Thick 1 x 2 - Axle Hole

×6

Technic, Axle 9L

Brick, Modified 1 x 1 x 3 with 2 Clips (Vertical Grip) - Hollow Stud

×2

Door, Frame 1 x 4 x 6 with 2 Holes on Top and Bottom

Door 1 x 4 x 6 Barred with Stud Handle

Brick 1 x 10

Brick 1 x 12

×2

Wheel Hard Plastic Small (22mm D. x 24mm)

×2

Slope 18 2 x 1 x 2/3 with Grille

×4

Slope 18 2 x 1 x 2/3 with Grille

×4

Slope, Curved 4 x 1

×2

Bar 1 x 3 with 2 Stud Receptacles (Radio Handle / Telephone Handset)

Brick, Round 4 x 4 with 4 Side Pin Holes and Center Axle Hole

×2

Brick, Modified 2 x 2 with Pin and Axle Hole

×2

Technic, Pin Connector Round 2L with Slot (Pin Joiner Round)

Plate, Modified 1 x 2 with Clip on End (Horizontal Grip)

×2

Bar 6L with Stop Ring

Minifigure, Utensil Dynamite Sticks Bundle

Wedge 4 x 4 Fractured Polygon Top

Technic, Axle Connector 2L (Smooth with x Hole + Orientation)

×5

Technic, Pin 3L with Friction Ridges

×10

Technic Cam

Technic, Axle 3L with Stud

×2

Technic, Liftarm Thin 1 x 3 - Axle Holes

×2

Tile 1 x 6

×2

Tile 1 x 6

×2

Sticker Sheet for Set 70317 - (24384/6132402)

Slope, Inverted 45 4 x 4 Double with 2 Holes

Plate, Modified 2 x 2 with Bar Frame Octagonal, Reinforced, Completely Round Studs

Bracket 5 x 2 x 2 1/3 with 2 Holes and Bottom Stud Holder

×2

Bracket 5 x 2 x 2 1/3 with 2 Holes and Bottom Stud Holder

×2

Tile 2 x 4

Technic, Axle 4L with Stop

×3

Panel 1 x 2 x 3 with Side Supports - Hollow Studs

×12

Panel 1 x 2 x 2 with Side Supports - Hollow Studs

×8

Panel 1 x 2 x 2 with Side Supports - Hollow Studs

Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper)

Brick, Modified Facet 2 x 2

×4

Window 1 x 2 x 2 Castle

Hinge Plate 2 x 2 Locking with 1 Finger on Top

Plate, Modified 1 x 4 with 2 Studs without Groove

×4

Bar 1L with Top Stud and 2 Side Studs (Connector Perpendicular)

Slope 45 2 x 1 with 2/3 Cutout

×2

Brick, Round 2 x 2 with Axle Hole and Grille / Fluted Profile

×2

Arch 1 x 6 Raised Arch

×2

Minifigure, Weapon Pike / Spear - Handle with Flat End

×2

Minifigure, Weapon Gun, Two Barrel Pistol - 10-Rib Top Barrel

×2

Brick and Axle Separator

Engine, Smooth Small, 1 x 2 Side Plate with Axle Holders and Slot

×2

Arm Mechanical, Exo-Force / Bionicle, Thick Support

×2

Technic, Axle and Pin Connector Perpendicular Double 4L

Plate, Modified 2 x 2 x 2/3 with 2 Studs on Side

×4

Plate, Modified 2 x 2 x 2/3 with 2 Studs on Side

×4

Bracket 1 x 2 - 2 x 2 Inverted

×2

Bracket 1 x 2 - 2 x 2 Inverted

×3

Bracket 1 x 2 - 1 x 2 Inverted

×6

Bracket 1 x 2 - 1 x 2

×2

The Fortrex

About The Fortrex

Part-out value

Seller notes

Minifigures in The Fortrex (7)

Parts (319)

Common questions about The Fortrex

How much is LEGO The Fortrex (70317-1) worth?

What minifigures come in LEGO set 70317-1?

Is it worth parting out LEGO The Fortrex?

Is LEGO The Fortrex (70317-1) retired?

How do I check if my The Fortrex set is complete?

More Nexo Knights sets

Explore more

Company

Legal