About The King's Mech
The King's Mech (70327-1) is a LEGO Nexo Knights set released in 2016, currently averaging $37.85 used on BrickLink. It comes with 3 minifigures worth a combined $21.63. The set has retired from retail, so secondary market is the only option. The full parts inventory runs 147 pieces.
Part-out value
Minifig value: $21.63 out of $37.85 total (57%). Over half the set's resale value is in the figures. Sellers parting this set out should list the minifigs individually on BrickLink — they'll earn more than bundling everything together.
Seller notes
- Sealed copies sell for $86.18 vs $37.85 used — a 128% premium. If you have this set new in sealed box (NISB), price it accordingly.
Minifigures in The King's Mech (3)
Parts (147)
Plate, Modified 2 x 2 with Pin Hole - Full Cross Support Underneath
Dark Bluish Gray×2
Tile, Modified 2 x 2 Inverted
Light Bluish Gray
Hero Factory Helmet Visor with Clip
Trans-Neon Orange
Slope, Curved 2 x 1 x 2/3
Red
Wedge 4 x 4 Triple Inverted with Connections between 4 Studs
Dark Bluish Gray×2
Wedge 2 x 2 (Slope 45 Corner)
Light Bluish Gray×2
Plate, Modified 1 x 2 with Small Tow Ball Socket on End
Light Bluish Gray×2
Appendage Bony Small with Bar End (Leg / Rib / Tail)
Dark Brown×2
Slope, Curved 2 x 2 x 2/3
Dark Blue×6
Slope, Curved 2 x 2 x 2/3
Light Bluish Gray×4
Slope, Curved 2 x 2 x 2/3
Dark Brown×3
Plate, Modified 2 x 2 with Pins on Bottom
Dark Bluish Gray×2
Technic, Pin with Friction Ridges and Pin Hole
Black×2
Projectile Launcher Part, Trigger for Gun, Mini Blaster / Shooter
Dark Bluish Gray×5
Projectile Launcher, 1 x 2 Mini Blaster / Shooter
Black×2
Technic, Pin Connector 3L with 2 Pins and Center Hole
Black
Technic, Axle 5L with Stop
Dark Tan×2
Slope 45 2 x 1 Triple with Bottom Stud Holder
Light Bluish Gray×6
Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)
Blue×2
Technic, Brick Modified 2 x 2 with 2 Ball Joints and Axle Hole
Dark Bluish Gray×2
Minifigure, Weapon Sword, Greatsword Pointed with Thick Crossguard
Flat Silver
Tile, Round 2 x 2 with Open Stud
Dark Bluish Gray×2
Plate, Modified 1 x 2 with Pin Hole on Bottom
Light Bluish Gray×3
Minifigure, Weapon Crossbow with Mini Blaster / Shooter
Black×2
Tile, Round 1 x 1 with Bar and Small Pin Hole
Pearl Gold×2
Tile, Modified 2 x 3 Pentagonal with Nexo Power Shield Pattern - Storm Dragon
Trans-Yellow
Tile, Modified 2 x 3 Pentagonal with Nexo Power Shield Pattern - Backfire
Trans-Neon Orange
Slope 45 1 x 1 x 2/3 Quadruple Convex Pyramid
Pearl Gold×9
Wedge 4 x 4 Pointed
Dark Blue×3
Wedge 4 x 4 Pointed
Flat Silver×2
Minifigure, Shield Pentagonal with Grooved Edges
Flat Silver
Windscreen 6 x 4 x 1 1/3 Pointed
Trans-Neon Orange
Plate, Modified 1 x 2 with Tow Ball on End
Dark Bluish Gray×2
Technic, Axle and Pin Connector Hub with 1L Axle
Light Bluish Gray×3
Brick 2 x 2 Corner
Blue×2
Minifigure, Weapon Sword, Blade with Bar End
Flat Silver
Tile, Modified 1 x 2 Grille with Bottom Groove
Dark Blue×4
Wedge, Plate 3 x 6 Cut Corners
Light Bluish Gray
Plate 2 x 2 Corner
Blue×2
Tile 1 x 4
Dark Blue×3
Tile, Modified 1 x 2 with Bar Handle
Blue×3
Bracket 1 x 2 - 1 x 4 with Rounded Corners
Light Bluish Gray×3
Brick, Modified 1 x 2 with Pin
Light Bluish Gray×2
Plate, Modified 1 x 2 with Bar Handle on Side - Free Ends
Blue×2
Plate, Round 2 x 2 with Rounded Bottom (Boat Stud)
Trans-Neon Orange
Technic, Pin with Short Friction Ridges
Black×7
Brick, Modified 2 x 2 with Pins and Axle Hole
Light Bluish Gray×2
Brick 2 x 2
Light Bluish Gray×2
Minifigure, Utensil Handlebars
Dark Bluish Gray
Brick 1 x 1
Dark Blue×8
Plate 2 x 4
Dark Blue
Plate 2 x 4
Light Bluish Gray×2
Plate 2 x 3
Dark Blue×2
Plate 1 x 2
Blue×11
Plate 1 x 2
Dark Blue×6
Plate 1 x 2
Trans-Orange
Plate 1 x 2
Dark Brown×2
Torso Mechanical, Battle Droid
Blue
Slope 45 2 x 3
Light Bluish Gray×2
Slope 45 2 x 2
Dark Blue×2
Slope 45 2 x 1
Dark Blue×2
Slope 45 2 x 1 Double with Bottom Stud Holder
Dark Bluish Gray×2
Tile 2 x 2 with Red Aurebesh Characters 'LOCK' and Key Controls Pattern
Light Bluish Gray
Tile 1 x 2
Light Bluish Gray×7
Tile 1 x 1 with Yellow King Symbol on Orange Pentagonal Shield Pattern
Blue
Technic, Plate 2 x 6 with 5 Holes
Blue
Technic, Axle 2L Notched
Black×3
Technic, Brick 1 x 2 with Axle Hole
Dark Bluish Gray×5
Technic Driving Ring Extension
Flat Silver×2
Technic, Liftarm Thick 1 x 5
Blue×3
Plate 1 x 3
Light Bluish Gray×2
Slope, Inverted 45 2 x 1
Light Bluish Gray×2
Technic, Brick 1 x 2 with Hole
Blue×2
Technic, Axle 4L
Black
Technic, Plate 2 x 4 with 3 Holes
Dark Bluish Gray×3
Plate 1 x 4
Dark Blue×2
Technic, Plate 2 x 8 with 7 Holes
Light Bluish Gray
Plate 2 x 6
Blue×2
Brick, Round 2 x 2 with Axle Hole
Light Bluish Gray
Plate, Round 2 x 2 with Axle Hole
Reddish Brown
Plate, Round 1 x 1
Trans-Neon Orange×21
Technic Bush 1/2 Smooth
Light Bluish Gray×5
Technic, Pin 1/2 without Friction Ridges
Light Bluish Gray×4
Slope 33 3 x 1
Light Bluish Gray×2
Technic, Axle 1L with Pin with Friction Ridges
Blue
Wedge, Plate 4 x 4
Trans-Neon Orange×4
Wedge, Plate 4 x 4
Dark Blue×2
Hinge Plate 1 x 2 Locking with 1 Finger on End without Bottom Groove
Dark Bluish Gray×2
Flag 2 x 2 Trapezoid with Flat Edge
Dark Blue×2
Bracket 1 x 2 - 2 x 2
Blue×4
Bracket 1 x 2 - 2 x 2
Light Bluish Gray×2
Arch 1 x 3
Light Bluish Gray×2
Technic, Axle 3L
Light Bluish Gray×3
Cone 1 x 1 with Top Groove
Pearl Gold
Plate, Modified 1 x 2 with Bar Arm Up (Horizontal Arm 5mm)
Dark Bluish Gray×3
Dish 2 x 2 Inverted (Radar)
Trans-Neon Orange
Dish 2 x 2 Inverted (Radar)
Light Bluish Gray
Brick, Modified 1 x 1 with Studs on 2 Sides, Opposite
Red
Wedge, Plate 3 x 4 with Stud Notches
Blue×2
Plate, Modified 1 x 2 with Bar Handle on Side - Closed Ends
Light Bluish Gray
Panel 1 x 2 x 1 with Rounded Corners
Blue×2
Slope, Inverted 45 4 x 2 Double with 2 x 2 Cutout
Light Bluish Gray
Bar 1L with Clip Mechanical Claw - Cut Edges and Hole on Side
Light Bluish Gray×2
Wedge, Plate 2 x 4
Dark Blue×2
Technic Ball Joint with Through Axle Hole
Black×5
Slope 30 1 x 1 x 2/3
Blue×3
Slope 30 1 x 1 x 2/3
Dark Blue×4
Slope 30 1 x 1 x 2/3
Light Bluish Gray×3
Hinge Plate 3 x 12 with Angled Side Extensions and Tapered Ends
Dark Blue×2
Technic, Brick Modified 2 x 2 with Ball Joint and Axle Hole with 6 Holes in Ball
Dark Bluish Gray
Slope, Inverted 45 6 x 4 Double with 4 x 4 Cutout and 3 Holes
Dark Bluish Gray
Plate, Modified 1 x 2 with 2 Open O Clips (Horizontal Grip)
Black×5
Plate, Round 4 x 4 with Hole
Dark Brown
Brick, Modified 1 x 1 with Open O Clip (Vertical Grip) - Hollow Stud
Blue×2
Technic, Liftarm Thick 1 x 2 - Axle Hole
Black×2
Slope, Curved 4 x 1
Light Bluish Gray×2
Brick, Modified 2 x 2 with Pin and Axle Hole
Dark Bluish Gray×2
Technic, Pin Connector Round 2L with Slot (Pin Joiner Round)
Flat Silver×2
Plate, Modified 2 x 16 with Angled Side Extensions and Axle Hole (Rotor Blade)
Light Bluish Gray
Plate, Modified 1 x 2 with Clip on End (Horizontal Grip)
Blue×2
Plate, Modified 1 x 2 with Clip on End (Horizontal Grip)
Reddish Brown
Minifigure, Weapon Lightsaber Hilt Straight
Black×2
Minifigure, Weapon Lightsaber Hilt Straight
Pearl Gold×2
Minifigure, Plume Feather Triple Compact / Flame / Water with Small Pin
Blue×2
Technic, Axle Connector 2L (Smooth with x Hole + Orientation)
Dark Bluish Gray
Technic, Axle 2L with Reverser Handle Axle Connector
Dark Bluish Gray×2
Technic, Pin 3L with Friction Ridges
Blue
Sticker Sheet for Set 70327 - International Version - (26267/6147074)
(Not Applicable)
Plate, Round 1 x 1 with Open Stud
Light Bluish Gray×3
Technic, Brick Modified 1 x 2 with Hole and Dual Liftarm Extensions
Dark Bluish Gray×3
Slope 30 1 x 2 x 2/3
Blue×5
Brick, Modified 1 x 1 with Stud on Side
Light Bluish Gray×2
Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper)
Dark Blue
Technic, Brick Modified 2 x 2 with Ball Socket and Axle Hole - Straight Forks with Round Ends and Open Sides
Dark Bluish Gray×9
Plate, Modified 1 x 2 with Clip with Center Cut on Top
Red
Plate, Modified 1 x 2 with Angled Bar Handles on Side
Black
Minifigure Beard, Medium Short
Dark Orange
Slope, Curved 4 x 1 x 2/3 Double
Dark Blue
Technic, Axle Connector 2 x 3 with Ball Joint Socket - Closed Sides, Straight Forks with Open Axle Holes
Dark Bluish Gray
Tile, Round 1 x 1
Trans-Orange×5
Arm Mechanical, Exo-Force / Bionicle, Thick Support
Blue×4
Minifigure, Utensil Toy Winder Key
Flat Silver×2
Hero Factory Arm / Leg Extender with Ball Joint and Ball Socket
Dark Bluish Gray×2
Vehicle, Spoiler with Bar Handle
Dark Bluish Gray×3
Pneumatic Hose Connector with Axle Connector
Dark Bluish Gray×2
Bracket 1 x 2 - 1 x 2 Inverted
Dark Bluish Gray×5
Bracket 1 x 2 - 1 x 2
Black×3Common questions about The King's Mech
How much is LEGO The King's Mech (70327-1) worth?
The King's Mech sells for an average of $37.85 used and $86.18 new/sealed on BrickLink based on 6 months of completed sales. As a retired set, prices tend to hold steady or appreciate over time, especially for complete sets with original packaging. Actual prices vary with completeness — missing minifigures or key parts will lower the value.
What minifigures come in LEGO set 70327-1?
This set includes 3 minifigures: Flame Thrower ($2.81), King Halbert - Gold Crown ($16.41), King's Bot ($2.42). The minifigures have a combined BrickLink value of $21.63. Each figure is linked above with individual pricing if you're looking to buy or sell specific characters.
Is it worth parting out LEGO The King's Mech?
The minifigures make up about 57% of the set value ($21.63 out of $37.85). Most of the value is in the complete set package, so selling it whole is likely the better move unless you have buyers lined up for specific figures.
Is LEGO The King's Mech (70327-1) retired?
Yes, The King's Mech was released in 2016 and has been retired from retail for several years. Retired LEGO sets are only available on the secondary market through BrickLink, eBay, or other resale platforms.
How do I check if my The King's Mech set is complete?
Use the parts list on this page to check every piece and all 3 minifigures. For the minifigures specifically, you can use the brick'em scanner to identify each figure from a photo and confirm it matches what should be in this set. Missing pieces can be individually sourced on BrickLink.