How much is LEGO Aaron's X-bow (72005-1) worth?

Aaron's X-bow sells for an average of $34.46 used and $76.12 new/sealed on BrickLink based on 6 months of completed sales. As a retired set, prices tend to hold steady or appreciate over time, especially for complete sets with original packaging. Actual prices vary with completeness. Missing minifigures or key parts will lower the value.

What minifigures come in LEGO set 72005-1?

This set includes 4 minifigures: VanByter No. 307 ($5.75), CyberByter ($2.92), Robin Underwood - Pearl Dark Gray Helmet, Black Legs, Pearl Gold Armor ($3.45), Aaron Fox - Trans-Neon Orange Visor, Pearl Gold Armor ($3.09). The minifigures have a combined BrickLink value of $15.21. Each figure is linked above with individual pricing if you're looking to buy or sell specific characters.

Is it worth parting out LEGO Aaron's X-bow?

The minifigures make up about 44% of the set value ($15.21 out of $34.46). Most of the value is in the complete set package, so selling it whole is likely the better move unless you have buyers lined up for specific figures.

Is LEGO Aaron's X-bow (72005-1) retired?

Yes, Aaron's X-bow was released in 2018 and has been retired from retail for several years. Retired LEGO sets are only available on the secondary market through BrickLink, eBay, or other resale platforms.

How do I check if my Aaron's X-bow set is complete?

Use the parts list on this page to check every piece and all 4 minifigures. For the minifigures specifically, you can use the brick'em scanner to identify each figure from a photo and confirm it matches what should be in this set. Missing pieces can be individually sourced on BrickLink.

Aaron's X-bow

72005-1·Nexo Knights·2018·4 minifigs·171 parts

Used Avg

$34.46

New Avg

$76.12

Add to your inventory Scan the minifigs

About Aaron's X-bow

Aaron's X-bow (72005-1) is a LEGO Nexo Knights set released in 2018, currently averaging $34.46 used on BrickLink. It comes with 4 minifigures worth a combined $15.21. The set has retired from retail, so secondary market is the only option. The full parts inventory runs 171 pieces.

Parts (171)

Plate, Modified 2 x 2 with Pin Hole - Full Cross Support Underneath

×2

Technic, Axle 1L with Pin 2L with Friction Ridges

×8

Plate, Modified 1 x 2 with Clip on Side (Horizontal Grip)

Slope, Curved 2 x 1 x 2/3

×4

Technic, Liftarm Thin 1 x 5 - Axle Holes

×2

Wedge, Plate 4 x 9 with Stud Notches

Plate, Modified 1 x 2 with Small Tow Ball Socket on End

×2

Technic, Liftarm, Modified H-Shape Thick 3 x 5 Perpendicular

×2

Slope, Curved 2 x 2 x 2/3

×13

Technic, Pin with Friction Ridges and Pin Hole

×8

Projectile Launcher, 1 x 4 Spring Shooter with Light Bluish Gray Top

×2

Projectile Arrow, Bar 8L with Round End (Spring Shooter Dart)

×3

Projectile Launcher Part, Trigger for Gun, Mini Blaster / Shooter

×7

Projectile Launcher, 1 x 2 Mini Blaster / Shooter

×4

Helicopter Landing Ski 1 x 6 with Pin Hole {15625}

×3

Slope 45 2 x 1 Triple with Bottom Stud Holder

Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)

×4

Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)

×2

Tile, Modified 1 x 1 with Open O Clip

×2

Minifigure, Weapon Harpoon, Smooth Shaft

×3

Minifigure, Weapon Harpoon, Smooth Shaft

×3

Plate, Modified 1 x 2 with Bar Handles on Ends

Technic, Liftarm Thick 1 x 1 (Spacer)

×3

Tile, Modified 2 x 3 Pentagonal

×2

Tile, Modified 2 x 3 Pentagonal with Nexo Power Shield Pattern - Goose Bumps

Tile, Modified 2 x 3 Pentagonal with Nexo Power Shield Pattern - Manic Pumpkin

Tile, Modified 2 x 3 Pentagonal with Nexo Power Shield Pattern - Merlok Power Hammer

Slope 45 1 x 1 x 2/3 Quadruple Convex Pyramid

×11

Wedge 4 x 4 Pointed

×2

Minifigure, Shield Pentagonal with Grooved Edges

×2

Wheel Hard Plastic, Treaded with 7 Pin Holes (37mm D. x 22mm)

×2

Bar 1L with Tow Ball

×2

Bar 1L with Tow Ball

×2

Minifigure, Weapon Gun, Mini Blaster / Shooter for Bar Arrows

×2

Brick, Modified 1 x 2 x 1 2/3 with Studs on Side

×2

Technic, Axle and Pin Connector Hub with 1L Axle

×4

Tile, Modified 1 x 2 Grille with Bottom Groove

×2

Tile, Modified 1 x 2 Grille with Bottom Groove

×4

Tile, Modified 1 x 2 Grille with Bottom Groove

×4

Wedge, Plate 3 x 6 Cut Corners

×2

Plate 2 x 2 Corner

×4

Plate 2 x 2 Corner

×5

Slope, Curved 3 x 2

Bracket 1 x 2 - 1 x 4 with Rounded Corners

×3

Plate, Round 2 x 2 with Rounded Bottom (Boat Stud)

×2

Plate, Round 2 x 2 with Rounded Bottom (Boat Stud)

Wedge, Plate 2 x 2 Cut Corner

×4

Windscreen 10 x 4 x 2 1/3 Canopy Pointed with Bar Handle

Plate, Modified 6 x 6 Hexagonal with Pin Hole

×2

Plate, Modified 1 x 2 with Large Axe Head

×6

Tile, Modified Facet 2 x 2

×4

Tile, Modified Facet 2 x 2

×8

Technic, Pin with Short Friction Ridges

×18

Plate, Modified 1 x 13 Sword with Angled Side Extensions, Textured Panel Inset with Hexagons

Slope 45 2 x 1 with Cutout without Stud

×4

Slope 45 2 x 1 with Cutout without Stud

×2

Technic, Liftarm, Modified Stud Connector Thin 1 x 4

×4

Brick, Modified 2 x 2 with Pins and Axle Hole

Brick 2 x 4

×2

Minifigure, Utensil Handlebars

Brick 1 x 2

×5

Plate, Modified 1 x 4 with Bar Arm Down

×2

Brick 1 x 4

×2

Plate 2 x 4

×3

Plate 2 x 4

×4

Plate 2 x 3

×2

Plate 2 x 2

×3

Plate 1 x 2

Plate 4 x 4

×2

Tile, Modified 2 x 3 with 2 Open O Clips

Bar 4L (Lightsaber Blade / Wand)

×2

Slope 45 2 x 2

×4

Slope 45 2 x 1

×2

Brick, Modified 1 x 4 with Studs on Side

×2

Slope 45 2 x 2 Double Convex Corner

×4

Slope 45 2 x 1 Double / Inverted with Bottom Stud Holder

Tile 1 x 2

×2

Tile 1 x 2

×14

Technic, Axle and Pin Connector Angled #1

×4

Technic, Axle and Pin Connector Angled #6 - 90 degrees

×4

Technic, Pin 3L with Friction Ridges and Stop Bush

×6

Technic, Axle 2L Notched

×8

Technic, Brick 1 x 2 with Axle Hole

×2

Technic, Axle and Pin Connector Perpendicular 3L with Center Pin Hole

Technic Driving Ring Extension

×2

Technic, Gear 20 Tooth Double Bevel

×2

Technic, Liftarm Thick 1 x 15

×4

Technic, Pin 3L without Friction Ridges

Plate 1 x 8

×6

Spider Head and Legs

×3

Minifigure, Helmet Wing

×6

Plate, Modified 4 x 4 with 3 x 3 Curved Cutout

×2

Plate 1 x 3

×2

Plate 1 x 6

×2

Plate 1 x 6

×2

Technic, Pin without Friction Ridges

×3

Technic, Brick 1 x 16 with Holes

×2

Technic, Axle 4L

×4

Technic, Axle 4L

×6

Plate 1 x 4

×2

Plate 1 x 4

×3

Plate 2 x 6

Door 1 x 3 x 1 Right

Door 1 x 3 x 1 Left

Technic, Brick 1 x 12 with Holes

×2

Hinge Brick 1 x 2 Base

Plate, Round 1 x 1

×15

Plate, Round 1 x 1

×6

Technic, Liftarm Thin 1 x 2 - Axle Holes

×2

Technic, Axle and Pin Connector Perpendicular Double Split

×2

Technic Wedge Belt Wheel (Pulley)

×4

Slope, Curved 6 x 1 with 2 Studs

×2

Technic Bush 1/2 Smooth

×5

Technic, Pin 1/2 without Friction Ridges

×36

Wedge, Plate 3 x 2 Right

×2

Wedge, Plate 3 x 2 Left

×2

Bracket 1 x 2 - 2 x 2

×2

Cone 1 x 1 with Top Groove

×4

Wedge, Plate 12 x 3 Left

×3

Wedge, Plate 12 x 3 Right

×3

Dish 2 x 2 Inverted (Radar)

×2

Plate, Modified 1 x 2 with Bar Handle on Side - Closed Ends

×4

Bar 1L with Clip Mechanical Claw - Cut Edges and Hole on Side

Slope, Curved 3 x 1

×2

Wedge, Plate 2 x 4

Plate, Modified 1 x 2 with 2 Open O Clips (Horizontal Grip)

×2

Plate, Modified 1 x 2 with 2 Open O Clips (Horizontal Grip)

Slope 18 4 x 1

×2

Plate, Modified 1 x 2 with Bar Handle on End

×2

Technic, Pin 1/2 with 2L Bar Extension (Flick Missile)

×4

Plate, Modified 1 x 1 with Open O Clip (Horizontal Grip)

×7

Hinge Brick 2 x 2 Top Plate

Slope 18 2 x 1 x 2/3 with Grille

×6

Technic, Pin Connector Round 2L with Slot (Pin Joiner Round)

×6

Leg Skeleton

Technic, Axle and Pin Connector Perpendicular Triple

×2

Technic, Axle and Pin Connector Perpendicular

×2

Technic, Brick 1 x 1 with Hole

×2

Technic, Pin 3L with Friction Ridges

×4

Technic, Axle 3L with Stud

×2

Technic, Pin with Friction Ridges and Tow Ball with Round Pin Hole

×4

Technic, Liftarm Thin 1 x 3 - Axle Holes

Tile 1 x 6

×9

Sticker Sheet for Set 72005 - (36975/6214704)

Technic, Shock Absorber 6.5L with Black Piston Rod - Hard Spring, Tight Coils in Middle

Technic, Brick Modified 1 x 2 with Hole and Dual Liftarm Extensions

×4

Slope 30 1 x 2 x 2/3

×2

Tile 2 x 4

×2

Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper)

×2

Bar 3L (Bar Arrow)

×2

Bar 1L with Top Stud and 2 Side Studs (Connector Perpendicular)

Technic, Axle and Pin Connector Perpendicular Split

×4

Slope 45 2 x 1 with 2/3 Cutout

×6

Slope, Curved 4 x 1 x 2/3 Double

Minifigure, Weapon Pike / Spear - Handle with Flat End

Cone 2 x 2 Truncated

×2

Tile, Round 1 x 1

×3

Technic, Axle and Pin Connector Perpendicular Double 4L

×2

Plate, Modified 2 x 2 x 2/3 with 2 Studs on Side

×2

Bracket 1 x 2 - 2 x 2 Inverted

×10

Bracket 1 x 2 - 1 x 2 Inverted

×8

Bracket 1 x 2 - 1 x 2

×2

Aaron's X-bow

About Aaron's X-bow

Part-out value

Seller notes

Minifigures in Aaron's X-bow (4)

Parts (171)

Common questions about Aaron's X-bow

How much is LEGO Aaron's X-bow (72005-1) worth?

What minifigures come in LEGO set 72005-1?

Is it worth parting out LEGO Aaron's X-bow?

Is LEGO Aaron's X-bow (72005-1) retired?

How do I check if my Aaron's X-bow set is complete?

More Nexo Knights sets

Explore more

Company

Legal